Intel NSC2U инструкция обслуживания

Intel ® IP Network Server NSC2U Configuration Guide System / Spares / Accessories List March 2008 Rev 2.2 Reference guide to assist customers an d the field in ordering the servers, accessories and spares ~Subject to Change Without Notice~[...]

March 2008 INFORMATION IN THIS DOCUMENT IS PR OVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICE NSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR O THERWISE, TO ANY INTELLECTUAL PROPERT Y RIGHTS IS GRANTED B Y THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND COND ITIONS OF SALE FOR SU CH PRODUCTS, INTEL ASSUMES NO LIABILITY WHA TSOEVER, AND INTE[...]

Table of Contents I. INTRODUCTION .............................................................................................. 4 II. PRODUCTION SYSTEM SKUS ................................................................... 5 III. PRODUCTION SPARES/ACCESSORIES LIST ................................ 10 IV. QUAD PORT BYPASS NIC CAPABILITY ..........[...]

I. Introduction Product Description: The Intel® IP Network Server NSC2U system is the second generation product of 2U Intel® IP Network Server products, havi ng l ong product life and 20-inch depth chassis. This server combines network po rt density and processor performance in a compact 2U package. The NSC2U support s a number of processor speed[...]

II. Production System SKUs The NSC2U Production System SKUs that can be ordered are listed below: Product Identification Code Description MM# Min. Order Qty. NSCA0201W Intel® IP Network Server NSC2U, Base Model 0 with AC Power Suppl y 889358 1 NSCD0201W Intel® IP Network Server NSC2U, Base Model 0 with DC Power Suppl y 889357 1 See the NSC2U Base[...]

NSC2U Base Model 0 Configuration: All Production SKUs are base model 0 SKUs (n o p rocessor, heatsink, memory, hard drive, power cord, operating system, o r plug-in adapters are provided). Thos e components must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating Sys tem List (THOL[...]

Notes on the NSC2U Model 0 Configuration and Options:  PCI Risers o The base configuration comes standard with two PCI Risers supporting up to five PCI slots. These include: ¾ One low-profile riser supporting two PCI-Express (PCIe) slots ¾ One full-height, full-length riser su pporting three slots: two PCIe x4 and one PCI-X. o Additional full-[...]

 IO Option Modules o These modules, available as optional accessories, attach to the s ystem board via a proprietary connector, and provide additional IO through the rear bulkhead. ¾ The AXXGBIOMO option module provides two Gigabit E thernet NICs. ¾ The AXXSASIOMOD option module provides one x4 external SAS port. o For ordering details, refer [...]

Details on Ordering Processors: The NSC2U is designed for the Quad-Core Intel® Xeon® 5400 and 5300 processor series, and also supports selected SKUs from the Du al-Core Intel® Xeon® 5100 series processors. Ordering details for the supported processors for the NSC2U are listed below. These include the choice of either Tray (for OEMs ) or Boxed ([...]

III. Production Spares/Accessories List Below are the Spare parts and Accessories that can be ordered with the NSC2U system. Any of these parts can be ordered as spares fo r part replacement purposes or as additional customer inventory. Some of the parts belo w are not included i n the NSC2U system base model and can be ordered as accessories for p[...]

Production Spares/Accessories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty PCI Risers and I/O Options ASR2500FHR SR2400 (2U) Full Height PCI-Expr ess riser (two PCI-Express slots, one PCI- X slot) Riser Y 880515 1 ADRACTRIS SR2500 (2U) Full Height PCI-X "active" high performance rise[...]

Production Spares/Accessories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty Spares NSCCBLMSCW NSC2U System Interconnect Cabl e Kit Flex cable (SAS interface, front panel signals), front panel power cable, serial port cable, CD-ROM cable, alarm cable, TAM module cable Y 889819 1 NSCFANSETW NSC2U[...]

IV. Quad Port Bypass NIC Capability This section is intended for customers that plan to us e the Quad Port NIC with Bypass capability on the NSC2U. It describes what pa rts must be ordere d to enable this capability. The NSC2U is capable of supporting: • Up to eight ports of front-accessible Gigabi t Ethernet (either Copper or Fiber) using Quad N[...]

Included in Min. PID Description Contents Order Code Base Model MM# Order (Y/N) Qty Fiber NIC EXPI9014PFBLK (Bypass rear access) Intel® PRO/1000 PF Quad Port Bypass Adapter (Fiber) – 5 Pack Quad-port design, based on two Intel® 82571GB dual-port PCI Express* GbE controllers N 876696 5 EXPI9024PFBLK (Bypass NIC-in-fro nt) Intel® PRO/1000 PF Qua[...]

Appendix A. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-post or 4 -post, 19 -inch or 23-inch racks are offered for this product. Please refer to the tables bel ow fo r the correct options to s uit your needs. All rack mount kits listed are su itable for 1U and 2U Intel® Communicat ions Rac[...]

TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Communi cation Rack Mount Servers to a 2 -post, central office type, 19-in ch wide rack. This kit consists of L-shaped brackets that fasten to the sides of the server and to the rack. TMLCMOUNT21 3/28/2008 v 2.2 16 of 20[...]

TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT5 2 TMLPMOUNT 41/51/5 2 series mounts Intel® Communication Rack Mount Servers to 2- post or 4-post racks. TMLPMOUNT 41 and TMLPMOUNT 51 are used for mounting servers on 19-inch wide racks. These racks are considered standard EI A (universal hole spacing) racks. TMLPMOUNT 52 is used for mou nting servers on 23-[...]

The diagrams above summarize the components and “slide-in rail-type” system of th e TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 3/28/2008 v 2.2 18 of 20[...]

The main difference between the TMLPMOUNT41 and TMLPMOUN T51/52 series is that the TMLPMOUNT41 series uses a screw to lock the server in place using the Universal Mounting Bracket, whi lst the TMLPMOUNT51/52 seri es has an additional Slide Pul l-Out Locking feature. Universal Front Mount ing Bracket on the TMLPMOUNT41 Slide Pull-Out Locking feature[...]

TMLPSLIDE01 The TMLPSLIDE 01 is an accessory kit designed for use in con junction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains tw o Universal Front Mounting Brackets tha t secure the server to the front of the rack. The sliding rails and optional mounting brackets re quired to mount the server must be [...]