Intellinet Network Solutions UNC-W10 инструкция обслуживания

User ’ s Guide V1.0 UNC-W10 Wi reless Network IP Camera[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide W ireless Network IP Camera User Manual Copyright October 2004 1 FCC Compliance S tatement The users manual or instruction manual for an intentional or uninte ntional radiator shall caution the user that changes or modifications not expressly approved by the part y responsible for compliance could voi d t[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 2 Important Notice 1. Camera surveillance laws may differ for each country . Please contact the local authorities to avoid any surveillance law violations. 2. Please note that the CMOS lens that comes with the W ireless Network IP Camera can be damaged permanently if the camera lens is exposed to dir ect [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide T ABLE OF CONTENTS PRODUCT OVER VIEW 5 A BOUT WIRELESS IP N ETWORK C AMERA 5 M AIN FEA TURES AND BENEFITS 6 S YSTEM REQUIREMENTS 7 PHYSICAL DESCRIPTION 9 C ONTENTS 9 T OP VIEW AND DESCRIPTION 10 R EAR VIEW AND DESCRIPTION 11 INST ALLA TION SUMMER Y 12 ASSIGNING IP ADDRESS & ACCESSING NETWORK IP CAMERA[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide CONFIGURING ADMINISTRA TION T OOLS 31 A DMINISTRA TION M ENU ’ S O VERVIEW 32 I MAGE C ONFIGURA TI ON 33 N ETWORK C ONFIGURA TION 35 W IRELESS C ONFIGURA TION 39 U SER C ONFI GURA TI ON 43 E VENT T RIGGER C ONFIGURA TION 44 T IME C ONFIGURA TI ON 48 S YSTEM C ONFIGURA TION 49 PTZ CONTROL 51 APPENDIX 52 [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide PRODUCTION OVER VIEW About Wireless Network IP Camera The W ireless Network IP Camera is able to connect directly to the Ethernet or Fast Ethernet network and also supported by the wireless transm ission based on the IEEE802.1 1b standard. It is different from the conventional PC Cam era, the W ireless Ne[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Main Features and Benefit s Convenient Operation The W ireless Network IP Camera is a standalone system with built-in CPU requiring no special hardware or software such as PC frame grabber cards. The W ireless Internet Camera supports both Active X mode for Internet Explorer and JA V A mode for Internet E[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide security settings in combination with an organizati on’ s Internet firewall, normally implements data protection. The Administrator can decide whether individuals, groups, or the whole world may access the camera. The W ireless Networ k IP Ca mera supports multi-user password protection Compression and [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide System Requirement 8 Network 10Base-T Ethernet or 100Base TX Fast Ethernet Wir eless Local Area Network IEEE802.1 1b W ireless LAN Recommended PC or Notebook to Access the wir eless Network IP Camera . System requir ement: CPU : Pentium II, 266 MHz or above Memory Size : 32 MB (64MB recommended) VGA card [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide PHYSICAL DESCRIPTION Content s Carefully remove all item s from the package. In addition to th is User ’ s Guide, be certain that you have:  One W ireless Network IP Camera (MNC-W10)  T wo External W ireless Antenna  One Installation CD-ROM  One Quick Installation Guide  One Printed Manua[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide T op view and Description Image Capture LED (Red): The Image Capture LED flashes when users are accessing the camera, it flashes once when an image is being captured or saved. Operating S tatus LED (Green): This LED indicates the W ireless Network IP Ca mera’ s operating status. Once power is supplied, [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Rear V iew and Description Power Connector: Only use the AC Adapter prov ided by your dealer to avoid any possible damage from electric shock. Network Connector: Connect 10baseT Ethernet or 100base TX Fast Ethernet cable. GPIO Connector : T o connect external devices such as infrared Sensors, alarms, or m[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide INST ALLA TION SUMMER Y 1. Connect Ethernet and Power to the Wire less Network IP Camera. 2. Install and launch the “IP-Installer” 3. Assign an IP address and network settings 4. Securely mount the W i reless Network IP Camera. 5. Adjust the Focus 12[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ASSIGNING IP ADDRESS & ACCESSING WIRELESS NETWORK IP CAMERA ’S HOMEP AGE Assigning IP Address T o access the W ireless Network IP Camera, y ou need to assign an appropriate network IP address. 13 IMPORT ANCE • Please use the newly assigned IP address, do NOT use any occupied IP address or the defa[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Assigning IP address by using IP installer Connecting W ir eless Network IP Camera to PC 1. Connecting with direct cable (Non Crossover UTP cable). Used when connecting the W ireless Network IP Camera to a switch, hub or router . 2. Connecting with Crossover UTP Cable. Use the crossover cable to directly [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Using IP Installer To in st al l a n I P ad dr es s, yo u s ho uld use the IP Installer provided with Wireless Network IP Camera. You can download it s program through the web site (http: //intel linet-network.com) Note: The MAC Address can be found on the underside label of the Wir eless Network IP Camer[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Configurations” button. The message shows up if all the information is set up properly . Then click the “OK” button. 16 NOTE After changing Network Configuratio n, It will take a little time to reboot the W ireless Networ k IP Camera so that you may access the W ireless Network IP Camera’ s Homepa[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Assigning IP Address by using Hyper T erminal Y ou can assign an IP address by using Hyper T erminal. In this case, you should configure Hyper T erminal first Configuring Hyper T erminal Hyper T erminal is a basic program for W indows 9x/ NT/2000. A PC can communicate with external devices through the ser[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 18 ③ Configure bit/sec as 19200 and leave other settings at the default values. ④ The panel shows up like thus image when configured properly . (If it doesn’t, please try again from beginning)[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Assigning IP Address Follow these steps to assign an IP addr ess using Hyper T erminal 1. Execute “Hyper T erminal” on your PC 2. Connect RS232 Cable to the serial port of PC that you have selected in Chapter 4.3.1 - Configuring Hyper T er minal and the W ireless Network IP Camera serial port while Hy[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 20 Here, inet on ethernet (e), host inet (h) and gateway inet (g) values are network config uration values. Y ou should change these values in most case. If you don’t know what value you should assign, refer to the network administrator . Inet on ethernet (e) is IP address and subnet mask address of W i[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 7. T ype ‘c’ key to change the network config uration in [ Boot] prompt. If you type ‘c’ key , W ireless Network IP Camera shows you the in formation you can change its values and the current assigned values. Y ou can change as the following figure. 8. When you terminate hyper-term inal program af[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Accessing Wireless Network IP Camera Homep age After assigning W ireless Network IP Camera an IP address, you may access W ireless Network IP Camera and monitor real-time image on Internet. Y ou may configure W ireless Network IP Camera within its own pages through any standard W eb browser on local or re[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 1. ID and Password If you key in a user ID and password, you can acce ss the camera to monitor real-time video. W ith administrator ’ s ID and password, you can access re al-time video with administrator’ s authority . The default value of both user ID a nd password are “admin” and the administrat[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 4) Java Applet for Macintosh or Unix System user . 24 Active-X installation manually If Active-X program fails to be installed automatically , you may install it manually . The manual installation program is to be downloaded by clicking ‘here’ as follows: Note : If you have any problem when you instal[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Java Applet viewer is for a user who access Wireless Network IP Camera through a computer that does not Utilize MS W indows (OS) such as Macint osh computer , etc. Java Applet viewer is run with java virtual Machine that is installed on User ’ s com puter . 25 Macintosh and Unix System The W ireless Net[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Wir eless Network IP Camera’ s Homepage Having completed the login procedure, you now see the W ireless Network IP Cam era ho mepage 1. Connected Client It show the number of multi access users. ( 100 multi users can be accessed simultaneously .) 2. Administrator Menu This button is to access the admini[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 4. Save, S top save, snap s hot, show only image ① Save, stop save Users can save real time i mages from W ireless Network IP Camera on PC. Press ‘save’ button then select folder that you want to save images. (The image is saved as an A VI file.) Once it starts to save images, “Saving” message a[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ② Snap Shot T o save only one image, press “snap shot” button and then select a folder . Save the image as JPG file. (Default file name dedicate the date and t i m e ) ③ Show only image When you want to see only video panel, Press “show only image” 5. Frame rate Y ou may choose image transmiss[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ADJUSTING THE CAMERA LENS Adjusting the Focus In order for the Focus Assistant to access the full focusing range fo r your application environment, simply turn the lens in the clockwise or counter clockwise direction; unless you want to replace the lens, it should not be unscrewed more than 1.0mm. * Adjus[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Replacing the Lens Because Wir eless Network IP Camera is designed with a CS-Mount, the lens supplied with your pr oduct can be replaced with any standard C or CS lens, typically used within the surveillance industry . Follow the instructions below to replace the supplied lens with any C or CS type lens: [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide CONFIGURING ADMINISTRA TION T OOLS Y ou can control the configurations of W ireless Network IP Camera by Administrator ’ s T ool. Only authorized user can access administrator t ool. If non-authorized users try to access it, you may see the caution message “Y ou are not an ad ministrator”. Y ou may [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Administration Menu’ s Overview The table below provides a one-step overview of the Administrations T ools: Image Configuration T o configure compression rate, image size, brightness, contrast, etc . Network Configuration T o configure camera IP , web server port, image transfer port W ireless Configura[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Image Configuration Example of W ireless N etwork IP Camera definable image attributes using the Focus Assistant: 1. Compression rate The file size of JPEG-compressed image depends upon the actual content of the image. Im ages containing much detail will generate lar ger files. Image quality is controlled[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 2. Image size Y ou may choose the image size VGA( 640x480) or QVGA(320x24 0) and 160*120 Large sizes of image (VGA) yields lower frame ra te, while small size maintains higher frame rate 3. V ertical Flip T o turn the image view upside down 4. Horizontal Flip T o switch the image view right from left 5. B[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Network Configuration This screen defines the network type and addresses of the W ireless Network IP Camera. Here you can configure the Camera’ s IP address, the DNS server address, and the Server IP address. Each configuration takes just a few seconds for booting after pressing “Submit”. 1. Set IP [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 2. Send IP address to e-mail T o send camera syste m information ( Camera Name, Camera Lo cation, DHCP IP address ), check in a text box and enter you email a ddress. (Y ou should configure your SMTP server information first) 3. Server Port Number T o set the Port Number for the W eb Server . (The default[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 7. ETSP port number T o set the port number for ETSP (Event T rigger Setting Program). (Default is “1 1000” and users can select from 8000 to 65535. (For the detail of ETSP , please refer to the ETSP manual.) 8. 1st, 2nd DNS server addr ess T o map between IP address and domain name , you should enter[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide IP address is when you want to access your network over the internet. The solution to the dynamic IP address problem comes in the form of a dynamic DNS service. (Please refer to the “APPENDIX” for the details.) 12. ID, password Enter the ID and Password to find the registered IP Network Camera in DDNS[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Wireless Configuration This screen is used to configure wireless setting to match with your Access Pointer for the wireless network connection. Wireless Setup 1. Use the connection Mode to determine the ty pe of wireless communication for the W ireless Network IP Camera. There are t wo choices of infrastr[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Encryption (WEP): WEP Key Entry #1: WEP Key Entry #2: WEP Key Entry #3: WEP Key Entry #4: Default Key: 1 40 Security settings: W ireless network communications are easily intercepted. WEP (W ired Equivalent Privacy) is an encryption method specified by the IEEE 802.1 1b standard to make any intercepted co[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide W ireless Network IP Camera is to be connected under Infrastructure mode. Y our PC/ Notebook’ s encryption code also needs to be setu p the same with the W ireless Internet Ca mera’ s en cryption code under either Infrastructure mode or Ad-hoc mode. The default setting for the Encryption Key is “D i[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 42[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide User Configuration This screen is used to configure IDs and Passw ords for an administrator and up to 5 users. 1. User Account There is one administrator account and 5 user accounts. Account names can be changed. 2. Password If you want to open your W ireless Network IP Camera to everyone, you may not cha[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Event T rigger Configuration This screen is used to designate an Email address or FTP server to receive captured images by setting SMTP or FTP settings. Y ou may connect exte rnal devices such as infrared Sensor or Alarm Sensor to use with the provided terminal bloc k (please refer to Appendix F – The I[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ② Motion Detection from…… This is to detect motion from camera by S/W data com pari son. When you select “Motion detection”, the W ireless Network IP Camera detects a motion triggered by camera lens. T o detect motion the camera compares a previous image from present image. When the motion is de[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 2. Image capture option This is to configure i mage capture option when an event is triggered. ① Before Event Y ou may set the starting time to capture image before event is triggered. (Input limitation is from 0 to 21 seconds.) ② After Event Y ou may set the finishing time to captu re image after eve[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 3. T rigger Output This is to configure digital output states and control script. W ireless Network IP Camer a sends captured image via E-mail or FTP server when connected external sensors detect events. ① External devices signal output This is to suppl y voltage to output po rt when events are triggere[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide T ime Configuration This screen is to configure date and time. 1. Synchronized with NTP server The W ireless Network IP Camera automatically configures Date & T ime through the NTP (Network T ime Protocol) server . The NTP Serv er is based on Greenwich time. Select NTP server , IP address and T ime zo[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 49 NOTE W ireless Network IP Camera does NOT support R TC(Real T ime Clock), in case you choose “Set manually” option, W ireless Network IP Camera reinstate as default value “2001/01/01 00:00:00”. T o configure Date & T ime, it must be reconfigured.[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide System Configuration This screen is used to configure camera name, location, and image sensor oscillator for frequency , PTZ control and System information for Wireless Network IP Camera . 1. Camera name This is to configure camera name for the front -page view . Camera name should be com posed within 15 [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 51 User can acces s the camera image via HTTP directly . 5. Image file name (max 10 characters) Set the image file name. 6. PTZ contr ol This is to configure PTZ control mechanism of W ireless Network IP Camera. Y ou may select PTZ control enable or disable. 7. PTZ contr oller Section This is to choose th[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide PTZ CONTROL This screen is to control PTZ function. This PTZ control box may be activated only if PTZ external devices are connected to W ireless Network IP Came ra and configure PTZ control enable in Sy stem Configuration screen . 52 NOTE All function is working while you pressing button. For example, wh[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 53 APPENDIX A. T echnical Specifications Image Resolution: 640x480, 320x240, 160x120 Standard JPEG Compression – 10 levels of com pressions Network 10baseT Ethernet or 100ba seTX Fa st Ethernet T wisted pair category 5 cables, Standard RJ45 connector Supporting protocol: TCP/IP , UDP , PING , ARP , FTP [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 54 Under 6W power consumption System Requir ements Operating systems: Windo ws 9x, W indows NT/2000, Linux, Unix, Mac, etc. Internet Explorer 4.0 or higher . JA V A applet f or no PC user (Mac or Unix) I/O Connector D-sub 9pin RS232 connector 1 Input to trigger the camera on external events. 1 Output of 1[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 55 B. Frequently Asked Question (F AQ) Asks for the features 1. What is a Network IP camera? A Network IP Camera is a stand-alone device whic h allows a user to view live, full m otion video from anywhere on a computer network, even ove r the Internet, using a standard web-browser. 2. Are all Network IP c[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 56 7. What additional software is required? Networking IP Cameras with an embedded Operating System (OS) should not need any additi onal software. 8. How does the built-in motion detection work? It very simply compares what it sees now to what it saw in the last frame and based on a sensitivity you select[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide C. T rouble Shooting This appendix provides useful information to help you to resolve any difficulty y ou m ight have with your W ireless Network IP Camera. Fault symptoms, possible causes and re m edial actions are provided within a quick reference table. PINGing your IP Address By sending a packet to th[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 58 The IP address is located within a different subnet Run the PING utility (as described in PINGing Y our IP Address, on page 39), If the utility returns “no response” or similar , the diagnosis is probably correct – you should then proceed as follows In W indows 95/98 or W indows NT , check the IP[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide A series broad vertical white line appears across the image. The CMOS sensor becomes overloaded when the light is too bright. This can happen e.g. with sun light reflexes. Direct exposure to extreme sunlight or halogen light may cause serious damage to the CMOS sensor . Reposition your W ireless Network I[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide D. Utilizing IP Addresses on Local Network Intr oduction Access to the Internet is achiev ed via Internet IP addresses. Cu rrently , IP addresses ar e limited. There are 5 classes of networks, and each network contains IP addresses. A network can only hold a limited number of IP addresses. The number of I[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide C Class Network 1. Features of Addresses IP address: The three-digit number in room ‘X4’ is for the Host ID. The number ranged from 0 to 255. Among the numbers, 0 is used for Network ID, 1 is used for Router IP (Gateway address) and 255 are used for Broadcast address. The numbe r from 2 to 244 are IP [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ③ T o use as three sub-networks (1/4 + 1/4 + 1/2) Sub-Network ID: xxx.xxx.xxx.0 Gateway Address: xxx.xxx.xxx.1 Subnet Mask: 255.255.255. 192 Broadcast Address: xxx.xxx.xxx.63 IP Addresses: xxx.xxx.xxx .2 – xxx.xxx.xxx.62 Sub-Network ID: xxx.xxx.xxx.64 Gateway Address: xxx.xxx.xxx.65 Subnet Mask: 255.2[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 63 IP Addresses: xxx.xxx.xxx.130 – xxx.xxx.xxx.190 Sub-Network ID: xxx.xxx.xxx.192 Gateway Address: xxx.xxx.xxx.193 Subnet Mask: 255.255.255. 192 Broadcast Address: xxx.xxx.xxx.255 IP Addresses: xxx.xxx.xxx .194 – xxx.xxx.xxx.254[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide E. Up dating Firmware Identify the version of Firmware Y ou can identify the version of Wireless Network IP Camera’ s Firmware on System Configuration Page. (Y ou may check the version of your W ireless Networ k IP Camera firmware first and then try to update) Follow the below steps to check the present[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide ① Confirm that the W ireless Network IP Camera is connected to your PC. (As long as you can access your W ireless Network IP Camera Homepage, you can process upgrading) ② Execute the newly updated firmware. ③ Enter Camera’ s IP address, Upgrade port number , Admin ID and Password configured on the[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide F . The I/O Connector The I/O Connector provides the physical interface to a digital output, and a single digital photo- coupled input that is used for connecting a vari ety of external alarm de vices to the W ireless Network IP Camera; including, IR-sensors, switches and alarm relay . In combination with[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide G . RS 232 CABLE The Serial Connector In absence of a local network connection, the RS 232 serial connector provides a physical interface for connecting a PTZ devices or computer to W i reless Network IP Camera. This means that W ireless Network IP Ca mera can opera te as a standa rd unit -independent of [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 68 H. Dynamic Domain Name Server (DDNS) Y our internet Service Provider (ISP) provides you at least one IP address which you use to connect to the Internet. The address you get may be static , meaning it never changes, or dynamic, meaning it’ s likely to change periodically . Just how ofte n it changes,[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide How to use ODS DDNS service 1. Get access to ODS homepage ( www .ods.org ). 2. In case you didn’t register your ID, you should select ‘REGISTE R’ menu and then register your ID/ Password. Otherwise, you just login with registered ID/Password. 3. After you register ID/Password normally , you can see [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide If you want to use normal DDNS service among ma n y services, you should fill in the blanks i n a check box and then click “Add Host” button. ① Host: write name you want. ② Domain: Select domain you want. ③ T ype: Select ‘A ’ (‘A ’ is normal) ④ T ar get: W rite initial IP of equipment [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide How to use DynDNS DDNS server 1. Get access to Dyndns homepage ( www .dyndns.org ). 2. In case you didn’t register your ID, click “Sign Up Now” and then register your ID. Otherwise, you just login with registered ID. 71[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 72 3. Click “Add Host”, and then go to the next page.[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 4. Enter Domain name you want and just leave other items, and then Click “Add Host” button to register . If you want to know detail of each field, please refer to F AQ of each homepage. 5. Y ou may see this page that shows setting in formation. after the register is succeeded, 73 NOTE After completing[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide DDNS registration for the Wireless Network IP Camera 1. After you set ODS or DynDNS successfully , you should move administration -> network configuration. 2. In DDNS Registration item, select D DNS server (ODS or Dyndns) you want. Enter ID/Password that you registered and fill domain name that you set[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide I. High Sp eed Solutions This information is to help you access high-speed In ternet services such as xDSL or a cable modem connection. However , most high-speed Internet Services pro vide you with some external IP addresses, there are several practical issues that should be considered. A V AILABLE IP ADD[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide Another solution is to use one of several small r outers/firewalls currently available on the market. These provide the necessary NA T functionality and allow complete independence for y our PC, which can be switched off or rebooted without af fecting the image transm ission from your W ireless Network IP[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide J. Reinst ating the Factory Default Settings This information explains instructions in detail on how to set the default settings in t he W ireless Network IP Camera. In certain circumstances it ma y become necessary to restart or reinstate the Factory Default settings for your W ireless Network IP Camer a[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 78 Factory default setting Administrator ID: admin Administrator Password: admin Guest ID: guest Guest Password: guest IP Address: 192.168.1.221 Subnet Mask Address: 255.255.255.0 Gateway Address: 192.168.1.1 Server IP Address: 192.168.1.200 Compression Rate: Level 1 Image Size: QVGA NOTE Reinstating the [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 79 K. Glossary of T erms ActiveX – A control (or set of rules) used by a brow ser . ActiveX controls are often downloaded and installed automatically as required. ARP – Address Resolution Protocol. A method for finding a host's Ethernet address from its Internet address. The sender broadcasts an [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 80 HTML - A markup language used to structure te xt and multimedia documents and to set up hypertext links between documents, used extensively on the W orld W ide W eb. HTTP - A protocol used to request and transmit files, especially W ebPages and W ebPages components, over the Internet or other computer [...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 81 track of the individual packets of information a nd IP contains the rules for how the packets are actually sent and received. URL – Uniform Resource Locator. An “address” on the network. WA N – Wide –Area–Network. A communications networ k that uses such devices as telephone lines, satellit[...]

WIRELESS NETWORK IP CAMERA User ’ s Guide 82 www .intellinet-network.com Copyright 2004[...]