Jasco 20626 инструкция обслуживания

Universal Remote Instruction Manual 20626[...]

2 Table of Contents Introduction .................................................................................................................. 3 Button Functions ....................................................................................................... 4 Setup .......................................................................[...]

3 Introduction Congratulations on your purchase of this 20626 Universal Remote Control. It is one of the most unique looking, and easy to use remote controls av ailable today. With the 20626 juggling multiple remote controls is a thing of the past! Y our 20626 Universal Remote controls up to 4 devices, including the most popular brands of TV , VCR,[...]

4 Button Functions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 20. 19. 18. 17. 16. 15. 14. 13. 12. 11. Note: The Record button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the Record button once, then press it again for thr ee seconds. Some buttons on the remote might have functions that ar e referred to by dif[...]

5 1. ON-OFF: Turns device On or Off. 2. Red Indicator : Lights when any button is pr essed. 3. TV, DVD , CBL/SAT , DVR/AUX: Selects product to be operated. 4. MUTE: Turns off the TV sound while the picture remains. 5. VOLUME UP/DOWN: Changes the volume lev el of the product , normally the TV . 6. UP , DOWN , LEFT & RIGHT: Navigation buttons. 7.[...]

6 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your r emote automatically turns off if the buttons are depressed more than 30 seconds.[...]

7 Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desir ed mode button ( TV , DVD , etc.). The red indicator blinks, then stays lit . 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator tur[...]

8 Code Search If your product does not r espond after you have tried all the codes for your brand, or if your brand is not listed, try searching for y our code by following these steps. 1. Manually turn on the device ( T V , DVD , etc.) to be contr olled. 2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP bu[...]

9 Code Identification Featur e The Code Identification Feature allows you to identif y the three digit library code stored under your device key. For example, if y ou want to find out what 4 digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the SETUP button until the red indicator stays on. Release the [...]

10 Programming Combo Device Codes Some Combo devices (e.g. T V/VCR, T V/DVD , DVD/VCR , etc.) will require y ou to set up two different Mode buttons to contr ol both parts of the Combo device. For example, if you have a T V/DVD Combo, you might need to set up one code under the TV button to control the TV par t AND a separate code (under any other [...]

11 Controlling Devices Requiring Separate Power On and Off Buttons, cont . To turn the TV off, press and release the ON-OFF button to transmit the Power Off button command. This method can be applied similarly to any device and is available for all Modes. Note this feature is not supported by all codes. VCR/DVD/DVR Punch-Thr ough Feature This remot[...]

Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing. Setting ALL Volume/Mute Control to any one Mode This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode. 1. Pr ess and hold the SETU[...]

Tr oubleshooting Remote does not operate your product . • Press the mode button of the product you want to contr ol. • Program the remote with a new code. • Install new batteries. (You might have to repr ogram your remote after installing new batteries.) • Remote may not be compatible with your product . Remote does not operate some feature[...]

14 Jasco Products Company warrants this product to be fr ee from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the r epair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit . This[...]

15 Jasco Products Company 10 E. Memorial Road Oklahoma City, OK 73114 Made in China Universal Remote Instruction Manual 20626-04/09 20626[...]