Jeep Patriot (2009) инструкция обслуживания

P A TRIO T 2009 ow ner’ s man ua l 2009 P A TRIO T Chrysler LL C 81-326-0912 First Edition Printed in U.S.A. I n f o r m a t i o n P r o v i d e d b y :[...]

VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution there- fore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol levels [...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 7 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ........................ 4 䡵 How T o Use This Manual .................. 5 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number ............... 7 䡵 V ehicle Modifications/Alterations ............ 8 1 I n f o r m a t i o n P r[...]

INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents. Y ou are urged to read these publications carefully . Following the inst[...]

Failure to use driver and passenger seat belts provided is a major cause of sever e or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or mor e each year and could reduce disabling injuries by two million annually . In a rollover crash, an unbelted person is [...]

6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all W arnings and Cautions.[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :[...]

THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith The Key ............. 1 5 ▫ Key-In-Ignition Reminder ................ 1 5 䡵 Steering Wheel Lock — If Equipped ......... 1 5 ▫ T o Manually Lock The Steering Wheel ..[...]

▫ Remote Key Unlock, Driver Door/All First P r e s s .............................. 2 1 ▫ Illuminated Approach — If Equipped ....... 2 2 ▫ T o Lock The Doors And Liftgate ........... 2 2 ▫ Sound Horn W ith Remote Key Lock ........ 2 2 ▫ Flash Lights W ith Remote Key Lock/Unlock . . 23 ▫ Using The Panic Alarm ................. 2 4 ▫ [...]

▫ Enhanced Driver Seat Belt Reminder System (BeltAlert 威 ) .......................... 4 6 ▫ Seat Belt Extender ..................... 4 7 ▫ Seat Belts And Pregnant W omen ........... 4 8 ▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag ............ 4 8 ▫ Event Data Recorder (EDR) .............. 5 8 ▫ Child Rest[...]

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransmission — If Equipped 1. Place the shift lever in P ARK. 2.[...]

NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become trapped tem- porarily in the ignition switch cylinder . If this occurs, rotate the key to the right slightly , then r emove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safet[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission 1. T urn the ignition switch to the ACC (Accessory) position. 2. Push the key and cylinder inwar d and rotate the key to the LOCK position. 3. Remove the key from the ignition[...]

Locking Doors With The Key Y ou can insert the key with either side up. T o lock the door , turn the key to the right. T o unlock the door , turn the key to the left. Refer to “Body Lubrication” under “Maintenance Procedur es” in Section 7. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition sounds a signal [...]

SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regar dless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded electronic chip (transponder) to pr event un[...]

• Exxon/Mobil Speedpass™, additional Sentry Keys 威 , or any other transponder-equipped components on the same key chain will not cause a key-r elated (transponder) fault unless the additional part is physi- cally held against the ignition key being used when starting the vehicle. Cell phones, pagers, or other Radio Fr equency (RF) electronics[...]

Customer Key Programming If you have two valid Sentry Keys 威 , you can pr ogram new Sentry Keys 威 to the system by performing the following procedur e: 1. Cut the additional Sentry Key 威 T ransponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch. T urn the ignition switch [...]

NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the sys- tem’s memory . This will prevent the lost key from starting your vehicle. The remaining keys must then be repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr ogrammed. General Informatio[...]

3. The V ehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the system is arming. During this period, if a door is opened, the ignition switch is turned ON, or the power door locks are unlocked in any manner , the V ehicle Security Alarm will automatically disarm. After approximately 16 [...]

NOTE: The line of transmission must not be blocked with metal objects. T o Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door , or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated e[...]

2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the LOCK position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the RKE transm[...]

• For vehicles not equipped with the EVIC, perform the following steps: 1. Press the LOCK button on a programmed RKE trans- mitter for at least 4 seconds, but no longer than 10 sec- onds. Then, press the P ANIC button while still holding the LOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle b[...]

3. T est the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the LOCK position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the RKE transmit- ter while you are in the vehicle will [...]

2. This device must accept any interfer ence that may be received including interference that may cause undesired operation. NOTE: Changes or modifications not expr essly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. If your RKE transmitter fails to operate fr om a normal distance, ch[...]

2. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o r eassemble the RKE transmitter case, snap the two halves together . NOTE: If the RKE transmitter is equipped with a screw , reinstall and tighten the scr[...]

W ARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death. CAUTION! An unlocked vehicle is an invitation to thieves.[...]

Automatic Door Locks — If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h), and 6. The doors wer e not pr [...]

5. Repeat these steps if you want to return this feature to its previous setting. NOTE: • If you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • Use the Automatic Unlock Doors On Exit featur e in accordance with local laws. Automatic Unlock Doors on Exit The doors wi[...]

NOTE: • If you do not hear the chime it means that the system did not enter the programming mode and you will need to repeat the procedure. • Use the Automatic Unlock Doors On Exit featur e in accordance with local laws. Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: [...]

Child-Protection Door Lock System (Rear Doors) — If Equipped Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. Child-Protection Door Lock Location Child-Protection Door Lock Function THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 31 2 I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS[...]

controls on each passenger door trim panel, which oper- ate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position. NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition swi[...]

Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window contr ols on the other doors, pr ess the window LOCKOUT switch. T o enable the window con- trols, press the window LOCKOUT switch a second time. LIFTGA TE NOTE: The key that is used to start the [...]

NOTE: • In the event of a power malfunction, or the RKE transmitter is inoperative, insert the key into the liftgate lock cylinder and turn to the right (manual lock models only). Using the liftgate handle, pull the liftgate open with one fluid motion. • Although the liftgate has no inside release mechanism, the liftgate trim panel includes an [...]

Gas props support the liftgate in the open position. However , because the gas pressure drops with tempera- ture, it may be necessary to assist the props when opening the liftgate in cold weather . OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts f[...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seats in your vehicle are equipped with Lap/ Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature allows the shoulder part [...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is very danger- ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bone[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the be[...]

Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best. As a guide, if you are shorter than average you will prefer a lower position, and if[...]

2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. Mini-Latch Stowage Routing The Rear Center Shoulder Belt THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 43 2 I n f o r m a t i o n P r o v i d e d b y :[...]

4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in the seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap. 6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “[...]

on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt r educes the risk of sliding under the belt in a collision. 8. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 9. T o release the belt, push the red b[...]

slide the latch plate down the webbing to allow the belt to retract fully . Insert the mini-latch plate into the slot provided in the trim panel. Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to automatically remove any slack from the seat belts in the event of a co[...]

BeltAlert 威 can be enabled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST ART position. Chrysler LLC does not recommend deactivating the Enhanced W arning System (BeltAlert 威 ). 1. T urn the ignition switch to[...]

W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Seat Belts And Pregnant Women W e recommend that pregnant women use the seat belts [...]

NOTE: The front airbags are certified to the Federal regulations that allow less forceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity . This vehicle may also be equipped with side curtain airbags to protect the driver and passeng[...]

NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag[...]

Along with the seat belts, fr ont airbags work with the instrument panel knee impact bolsters to provide im- proved protection for the driver and front passenger . Side curtain airbags also work with seat belts to improve occupant protection. The seat belts are designed to protect you in many types of collisions. The front airbags deploy in moderat[...]

5. If a child fr om 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint (refer to information on Child Restraint in this section). 6. Y ou should read the instructions provided with your child r estraint to make sure that you ar e using it [...]

Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (if equipped) • Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above side win- dows (if equipped) • Steering Wheel and Column • Instrument [...]

• The ORC also turns on the Airbag W arning Light in the instrument panel for six to eight seconds as a self-check when the ignition is first turned on. After the self-check, the Airbag W arning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag W arning Light either momentarily or continu- ous[...]

• The Side Impact SRS Side Curtain Airbag is designed to activate only in certain side collisions. When the ORC (with side impact option) detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the side curtain airbag. The infla[...]

However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the s[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passen[...]

Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to five seconds of specific vehicle data param- eters (see list below) in an event data r ecorder prior to the moment of airbag deployment, or near-deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deployment[...]

upon r equest. General data that does not identify par - ticular vehicles or crashes may be released for incorpo- ration in aggregate crash databases, such as those main- tained by the U.S. government and various states. Data of a potentially sensitive nature, such as would identify a particular driver , vehicle, or crash, will be treated confi- de[...]

• Cruise contr ol status • T raction/stability control status • T ire pressure monitoring system status Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small childr en ride in pr oper restraint systems. This is t[...]

Infants And Small Children There are dif ferent sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the correct seat for your child. Use the restraint that is correct for your child: • Safety experts recommend that c[...]

• The belt-positioning booster seat is for children weigh- ing mor e than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s cushion while the child’s back is against the seatback; they should use a belt positioning booster seat. The child and boo[...]

Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child r estraint in the vehicle where you will use it, before you buy it. • The restraint[...]

• Buckle the child into the seat according to the child restraint manufacturer’s directions. • When your child restraint is not in use, secure it in the vehicle with the seat belt or r emove it from the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious p[...]

the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints are not LA TCH-compatible, you can only install the child restraints using the vehicle’s seat belts. Please refer to Installing the Child Restraint System for typical installation instructions. Child res[...]

NOTE: When using the LA TCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is r ecommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child r estraint and out of reach. If t[...]

Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. NOTE: If your child restraint seat is not LA TCH com- patible, install the restraint using the vehicle seat belts. W ARNING! An incorrectly anchored tether strap could lead to increased h[...]

• If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger durin[...]

SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, fol- low these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move y[...]

Airbag W arning Light The light should come on and remain on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the LED is not lit during starting, have it checked. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer . Defroster Check operation by selectin[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 7 5 ▫ Inside Day/Night Mirror ................ 7 5 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 7 6 ▫ Outside Mirror — Driver’s Side ........... 7 7 ▫ Outside Mirror — Passenger’s Side ......... 7 7 ▫ Fo[...]

䡵 V oice Recognition System (VR) — If Equipped ........................... 1 0 9 ▫ V oice Recognition System (VR) Operation . . . 109 ▫ Commands .......................... 1 1 1 ▫ V oice T raining ....................... 1 1 4 䡵 Seats ............................... 1 1 4 ▫ Front Seat Adjustment ................. 1 1 4 ▫ Manual Seat[...]

▫ Map/Reading Lights .................. 1 2 9 䡵 W indshield W ipers And W ashers .......... 1 3 0 ▫ W indshield W iper Operation ............ 1 3 0 ▫ Intermittent W iper System .............. 1 3 1 ▫ W indshield W ashers ................... 1 3 1 ▫ Mist Feature ........................ 1 3 2 䡵 T ilt Steering Column ...................[...]

▫ Closing The Sunroof .................. 1 4 4 ▫ Pinch Protect Featur e .................. 1 4 4 ▫ Pinch Protect Override ................. 1 4 5 ▫ V enting Sunroof — Express ............. 1 4 5 ▫ Sunshade Operation ................... 1 4 5 ▫ W ind Buffeting ...................... 1 4 5 ▫ Sunroof Maintenance .................. 1 4 [...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (towar d the rear of vehicle). The mirror should be adjusted while set in t[...]

Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pressing the button at the base of the mirr or . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror [...]

Outside Mirror — Driver’s Side Adjust the flat (drivers side) outside mirror to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . Outside Mirror — Passenger’s Side Adjust the convex (passengers side) outside mirror to center on the adjacent lane of traffic with a slight overlap of the v[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror . Fol[...]

Power Mirrors — If Equipped The power mirr or controls are located on the drivers door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move. When you are finished adjusting the mirror , turn the control to the center positio[...]

W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror . V anity [...]

HANDS-FREE COMMUNICA TION (UConnect 姞 )— IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated Hands-Free Communication (UConnect 威 ) system. Refer to your “Navigation User’s Manual” for UConnect 威 system operating instructions for these ra- dios. Radio sales code can be located on the lower right corner of the Rad[...]

UConnect 威 features Bluetooth 威 technology - the global standard that enables different electronic devices to con- nect to each other without wires or a docking station, so UConnect 威 works no matter where you stow your cellu- lar phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the veh[...]

The radio display will be used for visual prompts fr om the UConnect 威 system such as ⬙ CELL ⬙ or caller ID on certain radios. Operation V oice commands can be used to operate the UConnect 威 system and to navigate through the UConnect 威 menu structur e. V oice commands are requir ed after most UConnect 威 system prompts. Y ou will be pro[...]

T o activate the UConnect 威 system from idle, simply pr ess the PHONE button and follow the audible prompts for directions. All UConnect 威 system sessions begin with a press of the PHONE button on the radio control head. Cancel Command At any pr ompt, after the beep, you can say ⬙ Cancel ⬙ and you will be returned to the main menu. However [...]

• Y ou will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority . Y ou can pair up to seven cellular phones to your UConnect 威 system. However , at any given time, only one cellular phone can be in use, connected to your UConnect 威 system. The priority allows the UConnect 威 s[...]

or downloaded phonebook. T o learn how to store a name in the phonebook, refer to ⬙ Add Names to Y our UConnect 威 Phonebook, ⬙ in the phonebook. • The UConnect 威 system will confirm the name and then dial the corresponding phone number , which may appear in the display of certain radios. Add Names to Y our UConnect 威 Phonebook NOTE: Add[...]

Phonebook Download – Automatic Phonebook T ransfer From Mobile Phone If equipped and specifically supported by your phone, UConnect 威 automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth 威 Phones with Phone Book Access Profile may support this feature. See UConnect 威 website f[...]

Phonebook Download — Single Entry If equipped and supported by your phone, UConnect 威 allows the user to download entries from their phone via Bluetooth 威 . T o use this feature, press the PHONE button and say “Phonebook Download.” The system prompts, “Ready to accept “V” card entry via Bluetooth 威 …” The system is now ready t[...]

• Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given [...]

• After you enter the name, the UConnect 威 system will ask you which designation you wish to delete: home, work, mobile, pager , or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. Delete/Erase “All”[...]

• The UConnect 威 system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the UConnect 威 system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-wa[...]

Making a Second Call While Current Call is in Progress T o make a second call while you are curr ently on a call, press the VOICE RECOGNITION button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first cal[...]

Call T ermination T o end a call in progress, momentarily press the PHONE button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically . This is cell phone-dependent. T o bring the call back f[...]

UConnect 姞 System Features Language Selection T o change the language that the UConnect 威 system is using: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the lan[...]

NOTE: • The emergency number dialed is based on the country where the vehicle is purchased (91 1 for the U.S. and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. T o do this, press the PHONE button and say ‘Setup?[...]

NOTE: • The towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). • If supported, this number may be programmable on some systems. T o do this, press the PHONE button and s[...]

or sequence of numbers, followed by ⬙ Send, ⬙ is also to be used for navigating through an automated customer service center menu structure, and to leave a number on a pager . Y ou can also send stored UConnect 威 phonebook entries as tones for fast and easy access to voice mail and pager entries. T o use this feature, dial the number you wish[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The UConnect 威 system will play the current confirmation pr ompt status and you will be given the choice to change it. Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster , and supp[...]

In order to un-mute the UConnect 威 system: • Press the VOICE RECOGNITION button. • Following the beep, say ⬙ Mute off. ⬙ Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect 威 system allows ongoing calls to be trans- ferred from your cellular phone to the UConnect 威 system without terminating the call. T [...]

Select Another Cellular Phone This feature allows you to select and start using another phone paired with the UConnect 威 system. • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Select Phone ⬙ and follow the prompts. • Y ou can also press the VOICE RECOGNITION button at any time whi[...]

V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UConnect 威 system V oice T raining feature may be used. T o enter this training mode, follow one of the two following pr oce- dures: From outside the UConnect 威 mode (e.g., fr om radio mode): • Press and hold the VOICE RECOGNI[...]

• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, Fr ench, and Spanish ac- cents, the system may not always work f[...]

• low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity , echo, and loudness to a large degree rely on the phone and network, and not the UConnect 威 system. • Echo at the far end can sometimes be reduced by lowering the [...]

104 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 105 3 I n f o r m a t i o n P r o v i d e d b y :[...]

106 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3 I n f o[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

When you pr ess the VR hard-key , you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will pr esent you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR hard-key , listen for the beep, and say your command. Pressing t[...]

Commands The V oice Recognition system understands two types of commands. Universal commands ar e available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR hard-key . 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the v[...]

Radio FM T o switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the frequency) • “Next Station” (to select the next station) • “Previous Station” (to select the previous station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (to [...]

Memo T o switch to the voice recor der mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to record a new memo) — During the recor ding you may press the VR hard-key to stop recor ding. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to continue re[...]

V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UConnect 威 system V oice T raining feature may be used. 1. Press the VR hard-key , say “System Setup” and once you are in that menu then say “V oice T raining.” This will train your own voice to the system and will improve[...]

Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched. W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehic[...]

Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboar d side of the driver’s seat. T o increase or decrease support, rotate the handle up or down. Driver’s Seatback Recline T o recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle. 2. Lift the handle to r[...]

Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear . Pull up or push down on the head restraints so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint. T o lower the head restraint, depress the button and push down on the head r[...]

After turning the ignition ON, you can choose from High, Low , or Off heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for High, one for Low , and none for Off. Press the switch once to select High-level heat- ing. Press the switch a second time to select Low-level heating[...]

Fold-Flat Front Passenger Seat T o fold the front passenger seat, lift the recliner handle to the full upward position and push the seatback forwar d until it rests on the seat cushion. Fold-Flat Front Passenger Seat Handle Front Passenger Seat Folded Flat UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 19 3 I n f o r m a t i o n P r o v i d e d b y[...]

Folding Rear Seat T o provide additional storage area, each rear seatback can be folded forwar d. Pull the strap forwar d to move the seat forward and flat. Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approximately 35 deg[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure that everyone in your vehicle is in[...]

2. Move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop rod, clipped to the right side (left side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. CAUTION! T o prevent possible da[...]

LIGHTS Multifunction Lever The multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and the fog lights. The multifunction lever is located on the left side of the steering column. Headlights, Parking Lights and Instr[...]

T o change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down. Lights-On Reminder If the headlights or parking lights are left on after the ignition is turned OFF , a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light swi[...]

NOTE: The fog lights will only operate with the head- lights on Low beam. Selecting High beam headlights will turn off the fog lights. Daytime Running Lights (DRL) — If Equipped The High beam lights will come on as Daytime Running Lights (DRL) at DRL intensity (lower), whenever the ignition is ON, the engine is running, the headlight switch is of[...]

T urn Signals Move the multifunction lever up or down and the arr ows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Y ou can signal a lane change by moving the lever partially up or down without moving beyond the detent. If either light remains on and does not flash, or there is a ve[...]

Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at High beam and remain on until the lever is released. NOTE: If the multifunction lever is held in the flash-to- pass position for more than 30 seconds, the High beams will shut off. If[...]

The auxiliary Off-Road lights can be turned on when off-r oad conditions require additional lighting. T o turn the auxiliary Off-Road light on, turn on the High beam headlights and press the top of the switch. T o turn off the auxiliary Off-Road lights press the bottom of the switch. NOTE: The High beam headlights must be on for the auxiliary Off-R[...]

Map/Reading Lights These lights are mounted between the sun visors above the rear view mirr or . Each light is turned on by pr essing the button. Press the button a second time to turn the light off. The lights also come on when a door is opened or the dimmer control is turned fully upward, past the second detent. NOTE: The lights will remain on un[...]

WINDSHIELD WIPERS AND W ASHERS The wipers and washers are operated by a switch on the control lever . The lever is located on the right side of the steering column. Windshield Wiper Operation T urn the end of the handle to select the desired wiper speed. W iper Control 130 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i[...]

Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the knob upward (clockwise) to decrease the delay time and downward (counterclockwise) to increase the delay time. The delay ca[...]

Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate. CAUTION! In cold weather , always turn of f the wiper switch and allow the wipers to return to the park position before turning off [...]

TIL T STEERING COLUMN T o tilt the steering column, push down on the lever below the turn signal control lever . W ith one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a st[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over accelerator operation at speeds gr eater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the steering wheel. T o Activate Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. T o tur[...]

NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET lever . T o Deactivate A soft tap on the brake pedal, pulling the speed control lever toward you “CANCEL”, normal braking, or clutch pressur e while slowing the vehicle, will deactivate speed control without erasing the set speed memory . Pressin[...]

Manual T ransaxle Depressing the clutch pedal will disengage the speed control. A slight increase in engine RPM before the speed control disengages is normal. V ehicles equipped with manual transaxles may need to be shifted into a lower gear to climb hills without speed loss. W ARNING! Electronic Speed Control can be dangerous where the system can?[...]

The HomeLink 威 buttons that are located in the headliner or sun visor designate the three different HomeLink 威 channels. NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if p[...]

Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the hand-held transmitter of the device being programm[...]

• After training a HomeLink 威 channel, if the garage door does not operate with HomeLink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Pr ogramming A Rolling Code System.” 4. Press and hold the just-trained HomeLink 威 button and observe the indi[...]

6. Firmly press and release the “Learn” or “T raining” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two secon[...]

has successfully accepted the frequency signal. The indicator light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Programming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, simply press and release the progra[...]

T roubleshooting Tips If you are having tr ouble pr ogramming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the “Learn” button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for training, and r emember to plug it b[...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading light. W ARNING! • Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury [...]

Opening the Sunroof Manual Mode T o open the sunroof, press and hold the switch rearwar d to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again. Express Mode Press the switch rearward and release, and the sunroof will open automatical[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the close position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof — Express Press and hold the “V” button, a[...]

Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation The sunroof will also operate up to 45 seconds after the ignition has been turned OFF . The sunroof operation will be canceled if either of the front doors are opened during the 45 second time period. ELECTRICAL POWER OUTLETS There [...]

W ARNING! T o avoid serious injury or death: • Do not use a three-prong adapter . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can[...]

POWER INVERTER — IF EQUIPPED A 1 15-V olt (150-W att) AC power inverter is located on the rear of the center console for added convenience. The power inverter can be used to power cell phones, elec- tronics and other low power devices. NOTE: Due to built-in overload protection, the power outlet will shut down if the 1 15-V olt AC (150-W att maxim[...]

W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from[...]

CUPHOLDERS Y our vehicle is equipped with four cupholders. There are two cupholders located in the front. There are also two cupholders located in the back for the rear passengers. Front Cupholders Rear Cupholders 150 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

STORAGE Glove Compartment And Storage Bin Located on the passenger side of the instr ument panel are an upper storage bin and a lower glove compartment. T o open the lower glove compartment, pull outward on the release handle. 1 — Upper Storage Bin 2 — Lower Glove Compartment Glove Compartment UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 151 3 [...]

Door Storage — If Equipped The interior door panels are equipped with upper and lower storage areas. Front Door Storage Rear Door Storage 152 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

CONSOLE FEA TURES The floor console contains both an upper and lower storage compartment. T o open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the upper lid. T o open the lower storage compartment, lift upward on the lower handle to unlatch the lower storage compart- ment and lift the lid open. U[...]

W ARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cell phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury . CARGO AREA FEA TURES Cargo Light/Removable Self-R[...]

T o operate the flashlight, press the switch once for high, twice for low , and a third time to return to off. Cargo Cover — If Equipped The car go ar ea trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. W ARNING! In an accident a cargo cover loose in the vehicle could cause inju[...]

Removable Load Floor The cargo ar ea load floor is removable and can be washed with mild soap and water . Cargo Tie-Down Loops There are four D-rings installed in the cargo area for securing cargo. W ARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow t[...]

W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden s[...]

activate the wiper . The rear wiper operates in an inter- mittent mode only . Rotating the center of the switch all the way forward will turn on the wash function. The wash pump will continue to operate as long as the button is pressed. Upon release, the wipers will cycle two times before returning to the set position. If the rear wiper is operatin[...]

operation, press the button a second time. T o prevent excessive battery drain, use the defroster only when the engine is operating. CAUTION! Use care when washing the inside of the rear window to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Also, keep all objects a safe [...]

CAUTION! • T o prevent damage to the roof of your vehicle, DO NOT carry any loads on the roof rack without cross rails installed. The load should be secured and placed on top of the cross rails, not directly on the roof. If it is necessary to place the load on the roof, place a blanket or some other protection between the load and the roof surfac[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ................ 1 6 5 䡵 Instrument Cluster – Premium ............ 1 6 6 䡵 Instrument Cluster Descriptions ............ 1 6 7 䡵 Electronic V ehicle Information Center (EVIC) — If Equipped ........................... 1 7 9 ▫ Engine Oil Change Indicator System ..[...]

䡵 Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) .................. 1 9 0 ▫ Operating Instructions - Radio Mode ....... 1 9 0 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 198 ▫ Notes On Playing MP3/WMA Files ........ 2 0 0 ▫ List Button (Disc Mode For MP3/WMA[...]

▫ Operation Instructions — CD Mode For CD And MP3 Audio Play .................. 2 2 3 ▫ Notes On Playing MP3 Files ............. 2 2 5 ▫ List Button (CD Mode For MP3 Play) ...... 2 2 8 ▫ Info Button (CD Mode For MP3 Play) ...... 2 2 8 䡵 Universal Consumer Interface (UCI) — If Equipped ........................... 2 2 9 ▫ Connecting T[...]

䡵 Remote Sound System Controls — If Equipped ........................... 2 4 0 ▫ Radio Operation ..................... 2 4 0 ▫ CD Player .......................... 2 4 1 䡵 CD/DVD Maintenance .................. 2 4 1 䡵 Radio Operation And Cellular Phones ....... 2 4 2 䡵 Climate Controls ...................... 2 4 2 ▫ Manual Heating, [...]

INSTRUMENT P ANEL FEA TURES 1 - Air Outlet 5 - Storage Bin 9 - Heated Seat Switch – If Equipped 2 - Demisters 6 - Glove Compartment 10 - Hazard W arning Flasher 3 - Instrument Cluster 7 - Climate Controls 1 1 - ESP OFF Switch – If Equipped 4 - Radio 8 - Power Outlet 12 - Heated Seat Switch – If Equipped UNDERST ANDING YOUR INSTRUMENT P ANEL 1[...]

INSTRUMENT CLUSTER – PREMIUM 166 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge/Fuel Door Reminder When the ignition switch is in the ON position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located. 2. Charging System Light This light shows the status of the electrical charg- in[...]

4. Oil Pressure W arning Light This light indicates low engine oil pressure. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut of f the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is [...]

10. Anti-Lock Brake (ABS) Light — If Equipped This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not func[...]

13. Engine T emperature W arning Light This light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches H , this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass H , the indicator will continuously flash and a con[...]

The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until [...]

The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 15. T ransmission T emperature W arning Light During sustained high speed driving on hot days, the automatic transaxle oil may bec[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cool- ing System Pressure Cap paragra[...]

has tires of a different size than the size indicated on the vehicle placard or tir e inflation pressur e label, you should determine the proper tire inflation pressur e for those tires.) As an added safety feature, your vehicle has been equipped with a T ire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one o[...]

tires or wheels on your vehicle, to ensure that the replacement or alternate tir es and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion[...]

replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined. CHAngE OIL Message Y our vehicle is equipped with an engine oil change indicator system. The “CHAngE OIL” message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sou[...]

the key is in the ON/RUN position before engine start. If the light does not come on when turning the key from OFF to ON/RUN, have the condition checked pr omptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the light after engine start. The vehicle should be serviced if the light stays on throug[...]

Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible. 31. 4WD! W arning Light This light mo[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the instrument cluster . The EVIC consists of the following: • System status • V ehicle information warning message displays • Personal settings (customer-pr ogrammable feat[...]

When the appropriate conditions exist, the EVIC displays the following messages: • T urn Signal On (with a continuous warning chime after one mile traveled) • Left Front T urn Signal Light Out (with a single chime) • Left Rear T urn Signal Light Out (with a single chime) • Right Front T urn Signal Light Out (with a single chime) • Right R[...]

Unless r eset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the T rip Odometer button on the instr ument cluster . T o reset the oil change indicator system (after performing the scheduled maintenance) refer to the fol- lowing procedur e[...]

• Distance T o Empty (DTE) • Elapsed T ime • T ire Pressure Monitor (TPM) • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed. T o reset all r esettable functions, press and release t[...]

Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , accor ding to the current fuel tank level. This is not resettable. NOTE: Significant changes in driving style or vehicle loading w[...]

Use the EVIC button to display one of the following choices: Language When in this display you may select different languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, Deutsch, Italiano, or Francais depend- ing on availability . As you continue, the displayed[...]

Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This featur e may be selected with or without the flash lights on lock/unlock feature. Press and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Flash Lights with R[...]

Delay Power Off to Accessories Until Exit When this feature is selected the power window switches, radio, hands–fr ee system, power sunroof, and power outlets will remain active for up to 60 minutes after the ignition switch has been turned OFF . Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display [...]

NOTE: Magnetic and battery powered devices, (such as cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument panel. This is where the compass module is located and such devices may interfer e and cause false compass readings. T o Set the V ariance W ith the ignition in the ON position, quickly[...]

Compass Calibration If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manu- ally recalibrate the compass. T o manually calibrate the compass: 1. Start the engine and leave the transmission in the P ARK position. 2. Press and r elease the EVIC button (less than one second) several times until the E[...]

ELECTRONIC DIGIT AL CLOCK The clock and radio each use the display panel built into the radio. A digital readout shows the frequency and/or time in hours and minutes (depending on your radio model), whenever the ignition switch is in the ON or ACC position. When the ignition switch is in the OFF position, or when the radio frequency is being displa[...]

SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME cont[...]

SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pr[...]

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control kn[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble [...]

Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Program T ype 16-Digit Character D[...]

SETUP Button Pressing the SETUP button allows you to select between the following items: NOTE: T urn the TUNE/SCROLL control knob to scroll through the entries. Push the AUDIO/SELECT button to select an entry and make changes. • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selec[...]

• VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES™ Lock - Locks out rear VES™ remote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2 wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Set Home Clock - Pressing the SELECT button allows y[...]

Subtitle Language — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). Y ou can select a language not listed by scrolling down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number a[...]

and pr ess and release that button. If a button is not selected within five seconds after pressing the SET but- ton, the station will continue to play but will not be stored into pushbutton memory . Y ou may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show i[...]

CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate th[...]

Press and hold the EJECT button for five seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF . SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the p[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recor ded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally . UDF and Apple HFS formats [...]

When using the MP3/WMA encoder to compress audio data to an MP3/WMA file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kH[...]

• Number of files and folders - Loading times will increase with more files and folders T o increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. T o cr eate a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST[...]

Pressing the AUX button will change the mode to auxil- iary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode[...]

Operating Instructions - Hands-Free Phone (UConnect 威 ) (If Equipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Operating Instructions - V ideo Entertainment System (VES)™ (If Equipped) Refer to separate “V i[...]

The REN and RER Multimedia systems contain a radio, CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy menu selection. The RER radio also contains a Global Positioning System (GPS)-based Navigation system. Refer to your Multimedia system (REN) or Naviga[...]

4. T o move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is dis- played. T o move the hour backward, touch the screen where the word “Hour” with the arrow pointing down- ward is displayed. 5. T o move the minute forward, touch the screen where the word “Min” with the arrow pointing upward is di[...]

T ouch the screen where the wor ds “Show T ime if Radio is Off” are displayed to change the current setting. Changing the T ime Zone 1. T urn on the multimedia system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the scr een where the words “Set T ime Zone” ar e displayed. The[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns contin[...]

4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob, or wait five seconds. R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates i[...]

AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you ar e receiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and [...]

Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 [...]

EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on [...]

SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . No[...]

• Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and a three- character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and c[...]

ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot [...]

NOTE: The AUX device must be turned on and the device’s volume set to proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seco[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns contin[...]

Phone Button (UConnect 威 Hands-Free Phone) — If Equipped Press this button to operate the Hands-Free Phone (UConnect 威 ) feature (if equipped). Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UConnect” message[...]

INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast from an FM station (FM mode only). R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in eithe[...]

MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not curr ently broadcast Music T ype information. T oggle the MUSIC TYPE button to sele[...]

Program T ype 16-Digit Character Display Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next fr equency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is act[...]

Y ou may add a second station to each pushbutton by repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stor ed into pushbutton memory . The stations stored in [...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs[...]

TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pre[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recor ded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally . UDF and Apple HFS formats [...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be af fected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with more files and folders T o increase the speed of dis[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the AUX button will change the mode to auxil- iary device i[...]

UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features. Please visit Apple’s website for software updates. NOTE: • If the radio has a USB port, connecting an iPod 威 to this port does not play the media. For playing an iPod 威 , use the separate 16–pin c[...]

• The iPod 威 can be controlled using the radio buttons to Play , Browse, and List the iPod 威 contents. • The iPod 威 battery charges when plugged into the UCI connector . Controlling The iPod 姞 Using Radio Buttons T o get into the UCI (iPod 威 ) mode and access a connected iPod 威 , press the ‘AUX’ button on the radio faceplate. On[...]

• Use the << SEEK and SEEK >> buttons to jump to the previous or next track. If the << SEEK button is pressed during the first two seconds of the track, it will jump to the previous track in the list, if you pr ess this button at any other time in the track it will jump to the beginning of the track. If you pr ess the SEEK >&[...]

• T urning it clockwise (forward) and counterclock- wise (backward) scr olls through the lists, displaying the track detail on the radio display . Once you have the track to be played highlighted on the radio display , press the TUNE control knob to select and start playing the track. T urning the TUNE control knob fast will scroll through the li[...]

the same steps to go to the desired track in that list. Not all iPod 威 sub-menu levels are available on this system. • MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your iPod 威 . CAUTION! • Leaving the iPod 威 (or any supported device) any- where in the vehicle in extreme heat or cold can alter[...]

System Activation Sirius Satellite Radio service is pre-activated and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account at [...]

Next, turn the knob surr ounding the joystick in the center of the radio to scroll to Subscription, and then press and release the joystick. All of the ESNs that apply to your vehicle will display . Selecting Satellite Mode Press the SA T button until ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while in the Satellite radio mo[...]

SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button (When Equ[...]

MUSIC TYPE Button — Except REU Radio Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type. By pr essing the SEEK butto[...]

SET Button – T o Set the Pushbutton Memory When you are receiving a channel that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this channel and pr ess and release that button. If a button is not selected within five seconds after[...]

REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker type switch with a pushbutton in the center . Pressing the top of the switch will increase the volume and pressing the bottom of the s[...]

The button located in the center of the left-hand control will tune to the next preset station that you have pro- grammed in the radio preset pushbuttons. CD Player Press the top of the switch once to go to the next track on the CD. Press the bottom of the switch once to go to the beginning of the curr ent track or to the beginning of the previous [...]

NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have theft protection encoding. T ry a known good disc before considering disc player service. RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellul[...]

The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls are as follows: Mode Control (Air Direction) The mode control allows you to choose fr om several patterns of air distribution as identified by the symbols. Panel Air is directed through the outlets i[...]

NOTE: There is a dif ference in temperatur e between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor Air is directed through the floor outlets and side window demister outlets with a small amount through the defrost outlet. Mix Air i[...]

NOTE: For maximum airflow to the r ear seat passen- gers, the center instr ument panel outlets can be aimed, so that the left center outlet is directed toward the right rear passenger and the right center outlet is directed toward the left rear passenger . Fan Control Use this control to regulate the amount of air forced through the system in any m[...]

Circulation Control Use this button to choose between outside air intake or recir culation of the air inside the vehicle. A lamp will illuminate when you are in recir culate mode. Only use the recirculate mode to tempo- rarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or humid wea[...]

MAX A/C For maximum cooling select the air direction to either the Panel or Bi-Level position using the mode control. Press the A/C button and the recirculation button so that both lamps are illuminated and set the temperature control to its coolest setting. NOTE: • Recirculation Mode will not operate in floor , mix or defrost modes. • See “C[...]

Operating Tips 248 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without A/C for long periods as fogging may occur . Interior fogging on the windshield can be quickly re- moved by u[...]

Side W indow Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets direct air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors. 250 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 5 6 ▫ Manual T ransmission — If Equipped ....... 2 5 6 ▫ Automatic T ransmission — If Equipped ..... 2 5 6 ▫ Normal Starting ..................... 2 5 6 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............... 2 5 7 ▫ If Engine Fails T o [...]

䡵 AutoStick 威 — If Equipped ............... 2 6 4 ▫ Operation .......................... 2 6 4 ▫ General Information ................... 2 6 5 䡵 Four-Wheel Drive Operation — If Equipped . . . 266 䡵 Driving On Slippery Surfaces ............. 2 6 6 ▫ Acceleration ........................ 2 6 6 ▫ T raction .........................[...]

䡵 Parking Brake ........................ 2 8 7 䡵 Brake System ......................... 2 8 9 ▫ Anti-Lock Brake System (ABS) — If Equipped .......................... 2 9 0 䡵 Electronic Brake Contr ol System ........... 2 9 2 ▫ Anti-Lock Brake System (ABS) ........... 2 9 2 ▫ Brake Assist System (BAS) .............. 2 9 3 ▫ T raction[...]

䡵 T ire Chains .......................... 3 1 8 䡵 Snow T ires .......................... 3 1 8 䡵 T ire Rotation Recommendations ............ 3 1 8 䡵 T ire Pressur e Monitoring System (TPMS) ..... 3 1 9 ▫ Base System ........................ 3 2 2 ▫ Premium System — If Equipped .......... 3 2 4 ▫ General Information .................[...]

▫ T railer And T ongue W eight .............. 3 4 1 ▫ T owing Requirements ................. 3 4 2 ▫ T owing T ips ........................ 3 4 7 䡵 Recreational T owing (Behind Motorhome, Etc.) ................. 3 4 8 ▫ T owing This V ehicle Behind Another V ehicle (Flat T owing W ith All Four Wheels On The Ground) .......................[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Do not leave the key in [...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to [...]

CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. MANUAL TRANSAXLE — IF EQUIPPED 5–Speed Manual T ransaxle W ARNING! Y ou or others could be injured if you leave the[...]

Fully depress the clutch pedal before you shift gears. As you release the clutch pedal, lightly depress the accelera- tor pedal. Use each gear in numerical order , do not skip a gear . Be sure the transaxle is in 1st gear , (not 3rd), when starting from a standing position. Damage to the clutch can result from starting in 3rd gear . For most city d[...]

Recommended Shift Speeds T o use your manual transaxle for optimal fuel economy , it should be upshifted as listed in the following table. Manual T ransaxle Recommended Shift Speeds Units in mph (km/h) Engine Size Accel- eration Rate 1t o2 2t o3 3t o4 4t o5 All En- gines Accel 14 (23) 23 (37) 29 (47) 45 (72) Cruise 12 (19) 18 (29) 25 (40) 32 (52) D[...]

CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear[...]

NOTE: If a malfunction occurs, the transaxle will not shift out of P ARK. Battery power is r equired to r elease the brake/transmission interlock system. There is a remov- able plug in the right side of the shift lever housing that allows you to insert your finger to override the system. The key must be in the ignition and in the ON position to use[...]

P ARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply the parking brake first, and then place the shift lever in the P ARK position. W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engin[...]

REVERSE Shift into this range only after the vehicle has come to a complete stop. NEUTRAL The engine may be started in this range. DRIVE This should be used for most driving and provides the best ratio for optimum drivability , fuel economy , and performance. AUTOSTICK 姞 — IF EQUIPPED Autostick 威 is a driver -interactive transmission that of [...]

Autostick 威 is deactivated: • By holding the shift lever to (+) momentarily • When the shift lever is shifted out of DRIVE • When in 6th position, touching the shift lever to the right • When heavy Anti-Lock Brake System (ABS) applica- tion is detected General Information • If a ratio other than 1st is selected and the vehicle is brough[...]

FOUR-WHEEL DRIVE OPERA TION — IF EQUIPPED This feature provides full time, on-demand, four–wheel drive (4WD). Where one or more wheels have wheel spin or if addi- tional traction is needed in sand, deep snow , or loose traction surfaces, activate the 4WD LOCK switch by pulling up once and releasing. This locks the center coupling allowing more [...]

W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.). T raction When driving on wet or s[...]

Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly . Failure to follow this warn[...]

CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission/transaxle, axle, etc.) for signs of con- tamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not continue[...]

ON-ROAD DRIVING TIPS Utility vehicles have higher gr ound clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. Specific design characteristics give them a higher center of gravity than ordinary cars. An advantage of the higher gr ound clearance is a better view of the road, allowing you to an[...]

CAUTION! Never park your vehicle over dry grass or other combustible materials. The heat from your vehicle exhaust system could cause a fire. W ARNING! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When T o Use Low (L Off-Road) with the 4WD Lock Lever Engaged When driving off-[...]

and avoid abrupt vehicle maneuvers. Y ou want to keep a slow constant steady pace. The key is to maintain the vehicle’s momentum. Snow In heavy snow or for additional control and traction at slower speeds, activate the 4WD LOCK and shift the transaxle to low (L Off-Road) if necessary . Do not shift to a lower gear than necessary to maintain headw[...]

Sand Soft sand is very difficult to travel through with full tire pressur e. When crossing soft sandy spots in a trail maintain your vehicle’s momentum and do not stop. The key to driving in soft sand is using the appropriate tir e pressur e, accelerating slowly , avoiding abrupt maneu- vers and maintaining the vehicle’s momentum. If you ar e g[...]

forward until it makes contact with the object. Apply the throttle lightly while holding a light brake pressure and ease the vehicle up and over the object. W ARNING! Crossing obstacles can cause abrupt steering system loading which could cause you to loose control of your vehicle. Using A Spotter There are many times where it is hard to see the ob[...]

vehicle’s mobility . Approach these obstacles at a 45- degree angle and let each tire go through the obstacle independently . Y ou need to use caution when crossing large obstacles with steep sides. Do not attempt to cross any large obstacle with steep sides at an angle great enough to put the vehicle at risk of a roll over . If you get caught in[...]

and place a few rocks under the tires so the weight is off of the high point when you let the vehicle down. Y ou can also try rocking the vehicle or winching the vehicle off the object. CAUTION! W inching or rocking the vehicle off hard objects increases the risk of underbody damage. Hill Climbing Hill climbing requir es good judgment and a good un[...]

slightly to bring all four tires back on the ground. As you approach the crest of the hill ease off the throttle and slowly proceed over the top. If the wheels start to slip as you appr oach the crest of a hill, ease off the accelerator and maintain headway by turning the steering wheel no more than a 1/4 turn quickly back and forth. This will prov[...]

Driving Across An Incline If at all possible avoid driving across an incline. If it is necessary , know your vehicle’s abilities. Driving across an incline places more weight on the down-hill wheels, which increases the possibilities of a down-hill slide or rollover . Make sure the surface has good traction with firm and stable soils. If possible[...]

designated and approved. Y ou should tread lightly and avoid damage to the environment. Y ou should know your vehicles abilities and be able to recover it if some- thing goes wrong. Y ou should never stop or shut a vehicle of f when crossing deep water unless you ingested water into the engine air intake. If the engine stalls, do not attempt to res[...]

soft bottoms the vehicle will sink in, effectively increas- ing the water level on the vehicle. Be sur e to consider this when determining the depth and the ability to safely cross. Crossing Puddles, Pools, Flooded Areas Or Other Standing W ater Puddles, pools, flooded or other standing water areas normally contain murky or muddy waters. These wate[...]

the slowest current can push the heaviest vehicle down- stream out of control if the water is deep enough to push on the large surface area of the vehicle’s body . Before you proceed determine the speed of the curr ent, the water’s depth, approach angle, bottom condition and if there are any obstacles, then cross at an angle heading slightly up[...]

V ehicle Recovery If you drive off-r oad, you may encounter a situation where you will need to recover your vehicle. V ehicle recovery should always be given consideration before attempting a questionable obstacle. Y ou should never go off-r oad driving without the ability to recover your vehicle from a situation. Having another vehicle with you us[...]

Rock Cycling Y our V ehicle Rock cycling your vehicle is one of the easiest, fastest and most commonly used methods. This simply involves shifting your vehicle from DRIVE to REVERSE, while applying throttle after each shift. During this process, for additional traction, try turning your steering wheel quickly back and forth no more than a 1/4 turn.[...]

for a safe recovery . If necessary join two tow straps together using a 1 1/2 in (4 cm) hard wood dowel. This will keep the straps from becoming knotted and is safer than using a clevis pin if the strap breaks. Next have the tow vehicle backup, leaving 2 to 3 ft (61 to 91 cm) worth of slack in the strap. Then the tow vehicle, using light throttle, [...]

• Check thr eaded fasteners for looseness, particularly on the chassis, drivetrain components, steering, and sus- pension. Retighten them, if requir ed, and torque to the values specified in the Service Manual. • Check for accumulations of plants or brush. These things could be a fire hazard, or they might hide damage to fuel lines, brake hoses[...]

POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will pr ovide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these condi- tions, y[...]

apparent, and/or the system is not functioning as antici- pated. Coor dinate inspection efforts thr ough an autho- rized dealer . No chemical flushes should be used in any power steering system; only the approved lubricant may be used. W ARNING! Fluid level should be checked on a level surface and with the engine of f to prevent injury from moving [...]

NOTE: The parking brake lever will not release unless the lever is pulled up slightly past its applied position. When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise, the load on the automatic transaxle locking mechanism may make it difficult to move the shift lever out of P ARK. As an [...]

BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. How- ever , the effort requir ed to brake the vehicle will be much greater than that required with the power system [...]

Anti-Lock Brake System (ABS) — If Equipped The ABS provides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up. W ARNING! • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an a[...]

the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not come on when the ignition switch is turned to the ON position, have the bulb repair ed as soon as[...]

W ARNING! The Anti-Lock Brake System (ABS) contains sophis- ticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This in- terference can cause possible loss of Anti-Lock brak- ing capability . Installation of such equipment should be performed by qualified p[...]

Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes. This can help reduce braking distances. The BAS complements the Ant[...]

T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability . A featur e of the TCS system functions similar to a limited slip differ ential and cont[...]

W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and skillful driver can prevent accid[...]

normal. When either the brake or the accelerator is released, HDC will control the vehicle back to the origi- nal set speed. HDC is only intended for low speed off-road driving. At vehicle speeds above 31 mph (50 km/h) HDC will no longer function. If the HDC indicator light begins to flash this indicates that the brakes are getting too hot and the [...]

ESP Indicator Light The “ESP Indicator Light” located in the instr ument cluster , starts to flash as soon as the tir es lose traction and the ESP system becomes active. If the “ESP Indicator Light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and drivi[...]

Full On (4WD Models) or On (2WD Models) This is the normal operating mode for ESP . Whenever the vehicle is started the ESP system will be in this “On” mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Off” or “ESP Off” for specific reasons as noted below . Partial Of f (4WD Models) or On [...]

In this mode, ESP is turned off until the vehicle reaches a speed of 35 mph (56 km/h). At 35 mph (56 km/h) the system r eturns to “Partial Off” mode, as described above. When the vehicle speed dr ops below 30 mph (48 km/h) the ESP system shuts off. ESP is deactivated at low vehicle speeds so that it will not interfere with off-road driving howe[...]

and the vehicle has been driven several miles/kilometers at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. NOTE: • The “ESP Indicator Light” and the “ESP/BAS W arning Light” come on momentarily each time the ignition switch is turned ON. • Each time the i[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidewa[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = T emporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size desi[...]

NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GA WRs) for the front and rear axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, r efer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of your vehicle, locate the statement “The comb[...]

6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this r educes the available cargo and luggage load capacity of your vehicle. NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicl[...]

308 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abn[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pr essures specified on the placar d are always “cold tire inflation pressur e.” Cold tire inflation pressure is defined as [...]

Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tir e pressure and r educed vehicle loading may be required for high[...]

W ARNING! • T emporary use spare tires are for emergency use only . With these tires, do not drive more than 50 mph (80 km/h). • T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • Be sure to follow the warnings which apply to your spar[...]

W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 50 mph (80 km/h). Keep it inflated to the cold tire inflation pressure listed on either your tire plac- ard or limited-use spare tire and wheel assembly . Replace (or repair[...]

T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire shoul[...]

W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Prote[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

TIRE CHAINS Due to limited clearance, tire chains are not r ecom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some ar eas of the country requir e the use of snow tires during W inter . Standard tires are of the all-season type and satisfy this requirement as indicated by the M+S designation on the tire side[...]

Follow the r ecommended tir e r otation fr equency for your type of driving found in the “Maintenance Schedules” section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed. TIRE PRESSURE MONITORING SYSTEM (TPMS) • The T ire Press[...]

tires. The tire pressure will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pressure. • The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pr essure warn- ing limit for any reason, including low temperatur e effects, or natural pressure loss [...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause[...]

• Seasonal temperature changes will affect tire pressur e, and the TPMS will monitor the actual tire pressure in the tire. Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure lev- els. Sensors, mounted to each wheel [...]

Check TPMS W arnings The T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The T ire Pressur e Monitoring T elltale Light will [...]

4. For each subsequent ignition key cycle, a chime will sound and the T ire Pressure Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid. 5. Once you repair or r eplace the original road tire and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the T ire Pres[...]

• V arious T ire Pressure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • Y ellow T ire Pressure Monitoring T elltale Light T ire Pressure Monitoring Low Pressure W arnings The T ire Pressure Monitoring T elltale Light will illumi- nate in the instrument cluster and an audible chime will be activ[...]

graphic display of the pressure value(s) will stop flash- ing, and the T ir e Pressure Monitoring Light will extin- guish once the updated tire pressur e(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check TPMS Message The T ire Pressur e Monitoring T elltale Ligh[...]

will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel[...]

limit in any of the four active road tires. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not [...]

Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline r eferred to as “reformulated gasoline”. “Reformulated gasolines” contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality . The manufacturer supports the use of “r eformulated gasolines”. Properly blend[...]

If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corrosion T o fix a Non-FFV vehicle inadvertentl[...]

MMT is prohibited in Federal and California reformu- lated gasolines. Materials Added T o Fuel All gasoline sold in the United States is required to contain ef fective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in additional cost. Therefore you should not have to add [...]

Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicl[...]

After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away from and protects the vehicle’s surface. CAUTION! • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light (MIL) to turn on. • T o avoid fuel spillage and overfilling, do not “top off”[...]

NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the MIL will come on. Be sure the gas cap is tightened every time the vehicle is refueled. W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a [...]

VEHICLE LOADING As required by National Highway T raffic Safety Admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or B-Pillar . V ehicle Certification Label Y our vehicle has a V ehicle Certification Label attached to the driver’s door B-Pillar . The label contains the following information: [...]

Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale befor e any occupants or cargo ar e [...]

TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requir ements and recommendations in this man[...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The tongue weight is the downward force exerted on the hitch ball by the trailer . In most cases it should not be l[...]

safety . The addition of a friction/hydraulic sway control also dampens sway caused by traffic and cr osswinds and contributes positively to tow vehicle and trailer stability . T railer sway contr ol and a weight distributing (load equalizing) hitch ar e r ecommended for heavier T ongue W eights (TW) and may be requir ed depending on V ehicle and T[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg) 2.4L Auto/Man 22 sq ft (2.04[...]

T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely from side-to- side which will cause loss of control of[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the T ire and Loading Information placard in the T ire Safety Information section of this manual for th[...]

• Safety chains must always be used between your vehicle and trailer . Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the chains under the trailer tongue and allow enough slack for turning corners. • V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow ve[...]

− When replacing tires, refer to “T ires–General Informa- tion” in this section for proper tire replacement proce- dures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GA WR limits. T owing Requirements — T railer Brakes − Do not inter connect the hydraulic brake system or vacuum system [...]

W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. Y ou might not have brakes when you need them and could have an accident. T owing any trailer will increase your stopping dis- tance. When towing you should allow for additional space between your vehicle an[...]

The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. 4-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn 7-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left Stop/T [...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. T owing T ips — Automatic T ransmission The automatic transmission fluid and filter should be changed if you REGULARL Y tow a trailer for more than 45 minutes of continuous operation. Refer to the “Main- tenance Sche[...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle (Flat T owing With All Four Wheels On The Ground) Recreational T owing Condition Manual T ransaxle V ehicles Automatic T ransaxle V ehicles Four Wheel Flat T ow (All Wheels on Ground) Y es Never T wo Wheel Dolly T ow (Front or Rear Wheels on Ground) Never Ne[...]

WHA T TO DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 3 5 0 䡵 If Y our Engine Overheats ................ 3 5 0 䡵 Automatic T ransaxle Overheating .......... 3 5 2 䡵 Jacking And T ire Changing ............... 3 5 2 ▫ Jack Location ....................... 3 5 3 ▫ Spare T ire Stowage ................... 3 5 3 ▫ [...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazard W arning flashers. When the Hazard W arning flasher switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency . Press the switch a second time t[...]

NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it of f. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode control to floor , and the fan control [...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to “Maintenance”, Section 7 of this manual. Follow the warnings under the “Cooling System Pressure Cap” p[...]

Jack Location The jack and jack-handle are stowed under the load floor in the cargo area. Spare Tire Stowage The spare tire is stowed under the rear load floor in the cargo area. Spare T ire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm level surface. A void ice or slippery are[...]

5. T urn on the Hazard W arning flasher . 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked. Jacking Instructions W ARNING! Carefully follow these tire ch[...]

W ARNING! (Continued) • If working on or near a roadway , be extremely careful of motor traffic. • T o assure that spare tires, flat or inflated are securely stowed, spares must be stowed with the valve stem facing the ground. • T urn on the Hazard W arning flasher . 1. Remove the scissors jack and lug wrench from the spare wheel as an assemb[...]

CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. 3. There are two front jacking locations and two rear jacking locations on each side of the body . The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts. For vehicles equipped with plastic trim, t[...]

6. Remove the wheel nuts and pull the wheel (and bolt-on center cap if equipped) off the hub. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel. Lightly tighten the nuts. T o avoid the risk of forcing the vehicle off the jack, do not tighten the nuts fully until the vehicle has been lowered. 7. Lower the v[...]

JUMP-ST ARTING PROCEDURES W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be hurt by the fan. • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transaxle cannot be started this way and may be damage[...]

2. T urn off the heater , radio and all unnecessary electrical loads. 3. Using the two finger scr ews on the cover , r emove the air intake duct covering the battery . 4. Connect one end of a jumper cable to the positive terminal of the booster battery . Connect the other end of the jumper cable to the positive terminal of the dis- charged battery [...]

8. When removing the jumper cables, reverse the se- quence exactly . Be careful of the moving belts and fan. FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with T raction Con- trol or ESP , turn the system OFF before attempting to “rock” the vehicle. If your vehicle becomes stuck in mud, sand or snow , it can often be moved by a rock[...]

TOWING A DISABLED VEHICLE With Ignition Key Automatic T ransaxle • Front Wheel Drive (FWD) vehicles can be towed with the front wheels elevated or on a flatbed truck (all four wheels off the ground). • All Wheel Drive (A WD) vehicles must be towed on a flatbed truck (all four wheels of f the ground). CAUTION! DO NOT flat tow any vehicle equippe[...]

CAUTION! • If the vehicle being towed requires steering, the ignition switch must be in the ACC position, not in the LOCK position. • Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat bed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing.[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.0L/2.4L .......... 3 6 5 䡵 Onboard Diagnostic System — OBD II ....... 3 6 6 ▫ Loose Fuel Filler Cap Message ........... 3 6 6 䡵 Emissions Inspection And Maintenance Programs ............................ 3 6 7 䡵 Replacement Parts ..................... 3 6 8 䡵 Dealer Service [...]

▫ Brake System ....................... 3 8 4 ▫ Automatic T ransaxle (CVT) .............. 3 8 6 ▫ Manual T ransaxle .................... 3 8 6 ▫ Rear Drive Assembly (RDA) – A WD/4WD Models Only ........................ 3 8 7 ▫ Power T ransfer Unit (PTU) – A WD/4WD Models Only ........................ 3 8 8 ▫ Appearance Care And Prote[...]

ENGINE COMP ARTMENT — 2.0L/2.4L 1 — W asher Fluid Reservoir 6 — Battery 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressure Cap 4 — Brake Fluid Reservoir 9 — Engine Oil Dipstick 5 — Integrated Power Module 10 — Engine Coolant Reservoir MAINT AINING YOUR VEHICLE 365 7 I n f o r m a[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are oper- ating properly , your vehicle will provide excellent per - formance and fuel economy , as we[...]

persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row , the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspect[...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals befor e attempting any procedur e yourself. NOTE: Intentional tampering w[...]

The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading. Checking the oil while the vehicle is on level ground and only when the engine [...]

American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is r ecommended for all operating temperatures. This engine oil improves [...]

environment. Contact your authorized dealer , service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change. Engine Oil Filter Selection All of this manufactur er’s engines have a full-flow typ[...]

Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery w[...]

CAUTION! (Continued) • If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery . Do not use a “fast charger” to provide starting voltage. Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and service[...]

Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydrofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by authorized dealers or other service facilities using r ecovery and recycl[...]

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. A void using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the glass before turning them on to avoid damag[...]

exhaust system each time the vehicle is raised for an oil change or lubrication. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Exhaust Gas” in the Safety T [...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]

W ARNING! (Continued) • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Coolant Checks Check engine coolant (antifreeze) pr ote[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-HOA T engine coolant (antifreeze) is introduced into the cooling system in an emer - gency , it should be replaced with the spe[...]

When adding engine coolant (antifreeze), a minimum solution of 50% recommended MOP AR 威 Antifreeze/ Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology), or equivalent, in water should be used. Use higher concentrations (not to exceed 70%) if temperatures below ⫺ 34°F ( ⫺ 37°C) are antici- pated. Use only high pu[...]

W ARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules[...]

Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moisture from rain, snow , or high humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot engine coolant ([...]

Brake System In order to assure brake system performance, all brake system components should be inspected periodically . Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal ca[...]

Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. W ARNING! • Use of a brake fluid that may have a lower initial boiling point or is unidentified as to specification, may result in sudden brake failure during hard prolonged braking. Y ou could hav[...]

Automatic T ransaxle (CVT) Selection Of Lubricant It is important that the pr oper lubricant is used in the transaxle to assur e optimum transaxle performance. Use only the manufacturer’s recommended transmission fluid which has been formulated with special metal to metal friction coefficient additives to provide the proper steel belt traction on[...]

Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not mor e that 3/16 in (4.7 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level. Frequency Of Fluid Change Under normal operating conditions, the fluid installed at the fac[...]

Power T ransfer Unit (PTU) – A WD/4WD Models Only Lubricant Selection Use only the manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. Fluid Level Check V isually inspected the unit at each oil change for leakage. If leakage is detected, Check the fluid level by remo[...]

What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes of corrosion are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near sea coast localities. • Atmospheric fallout/ind[...]

Special Care • If you drive on salted or dusty r oads or if you drive near the ocean, hose of f the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, r ocker panels and trunk be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately .[...]

YES Essentials 威 Fabric Cleaning Procedure – If Equipped YES Essentials 威 seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel. • For tough stains, apply MOP AR 威 T otal Clean or a mild soap solution to a clean, [...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas, they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and, ther efo[...]

Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully . Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface. Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehic[...]

FUSES Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini-fuses. A label that identifies each component may be printed on the inside of the cover . Refer to “Engine Compartment” in this section of the Owner’s Manual f[...]

Cavity Cartridge Fuse Mini- Fuse Description 13 20 Amp Y ellow Pwr Run/Acc Outlet RR/Dome Lamp 14 10 Amp Red IOD CCN 15 40 Amp Green RAD Fan Relay Bat- tery Feed 16 15 Amp Lt Blue IGN Run/Acc Dome Lamp/Sunroof/Rear W iper Motor/ACC Inverter 17 10 Amp Red IOD Feed Mod-Wcm 18 40 Amp Green ASD Relay Contact PWR Feed 19 20 Amp Y ellow PWR Amp 1 & A[...]

Cavity Cartridge Fuse Mini- Fuse Description 28 10 Amp Red IGN RUN ORC/OCM Feed 29 Hot Car (No Fuse Re- quired) 30 20 Amp Y ellow Heated Seats 31 10 Amp Red Headlamp W asher Relay Control (If Equipped) 32 30 Amp Pink ENG ASD Control Feed 1 33 10 Amp Red ABS MOD/J1962 Conn/PCM 34 30 Amp Pink ABS V alve Feed 35 40 Amp Green ABS Pump Feed Cavity Cartr[...]

CAUTION! (Continued) • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system over- load. If a properly rated fuse continues to blow , it indicates a problem in the circuit that must be corrected. VEHICLE S[...]

BULB REPLACEMENT Headlamps 1. Raise the hood and locate the connector behind the headlight. 2. Reach into engine compartment and pull r ed lock out at connector . 398 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

3. Remove the green connector from the back of the bulb by pulling straight back. 4. T wist the bulb to the left. MAINT AINING YOUR VEHICLE 399 7 I n f o r m a t i o n P r o v i d e d b y :[...]

5. Pull bulb outward from assembly . NOTE: These are halogen bulbs. T ake car e not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life. Fog Lights See your authorized dealer for replacement. T ail Lights, Rear T urn Signals And Backup Lights 1. Remove the two push-pins from th[...]

License Lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the light from the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. MAINT AINING YOUR VEHICLE 401 7 I n f o r m a t i o n P r o v i d e d b y :[...]

3. Pull the bulb from the socket. Center High-Mounted Stoplight Light is an LED assembly . See your authorized dealer for replacement. Auxiliary Off-Road Light 1. Remove the three screws attaching the lens to the housing. 402 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

2. Unlatch the wire clasp securing the bulb into the housing and rotate it into the position shown. 3. Disconnect the bulb from the light harness to replace the bulb. MAINT AINING YOUR VEHICLE 403 7 I n f o r m a t i o n P r o v i d e d b y :[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOP AR 威 Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula) 7.2 Quarts 6.8 Liters * Includes heater and coolant recovery bottle fi[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard MS-6395. Refer to your engine oil [...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransaxle (CVT) MOP AR 威 CVTF + 4 Automatic T ransmission Fluid Manual T ransaxle MOP AR 威 A TF+4 Automatic T ransmission Fluid Rear Drive Assembly (RDA) MOP AR 威 Gear & Axle Lubricant SAE 80W -90 API GL 5 or equivalent non- synthetic product. Power T ransfer Unit (PTU) MOP AR[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 0 8 䡵 Maintenance Schedule .................. 4 0 8 ▫ Required Maintenance Intervals .......... 4 1 0 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued pr oper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil mor e often if you drive your vehicle off-r oad for an extended period of time. ?[...]

Once a Month • Check the tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. A[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (except 2.4L PZEV). ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order # Dealer [...]

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the a[...]

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning filt[...]

72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning fi[...]

132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

† This maintenance is r ecommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job,[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 2 7 ▫ Prepar e For The Appointment ............ 4 2 7 ▫ Prepar e A List ....................... 4 2 7 ▫ Be Reasonable W ith Requests ............ 4 2 7 䡵 If Y ou Need Assistance .................. 4 2 7 ▫ Chr[...]

䡵 Publication Order Forms ................. 4 3 1 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 3 2 ▫ T readwear .......................... 4 3 3 ▫ T raction Grades ...................... 4 3 3 ▫ T emperature Grades ................... 4 3 4 426 IF YOU NEED CONSUMER ASSIST ANCE I n f o r m a t i o[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be r e- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impair ed customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear contain, or emit, chemi- cals known to the State of [...]

T o contact NHTSA, you may either call the Auto Safety Hotline toll fr ee at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Adminis- trator , NHTSA, 400 Seventh Street, SW ., W ashington, D.C. 20590. Y ou can also obtain other information about motor vehicle safety from http://www .safercar .gov[...]

• Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer-controlled ve- hicle systems and features. They show exactly how to find and corr ect pr oblems the first time, using st[...]

T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relative performance of tir es depends upon the actual [...]

T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire [...]

INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]

ABS (Anti-Lock Brake System) .............. 2 9 0 Adding Engine Coolant (Antifreeze) .......... 3 8 0 Adding Fuel ........................... 3 3 2 Adding W asher Fluid ..................... 3 7 6 Additives, Fuel ......................... 3 3 1 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 372 Air Conditioner Maintenance ............... 3 [...]

Autostick ............................. 2 6 4 Battery ............................... 3 7 3 Keyless T ransmitter Replacement (RKE) ....... 2 5 Body Mechanism Lubrication ............... 3 7 5 B-Pillar Location ........................ 3 0 5 Brake Assist System ...................... 2 9 3 Brake Fluid ............................ 4 0 6 Brake, Parkin[...]

Chains, T ire ............................ 3 1 8 Changing A Flat T ire ..................... 3 5 2 Chart, T ire Sizing ........................ 3 0 2 Check Engine Light (Malfunction Indicator Light) ............... 3 6 7 Child Restraint .......................... 6 0 Child Restraint T ether Anchors ............... 6 4 Child Restraint with Automatic[...]

Cupholders ............................ 1 5 3 Customer Assistance ..................... 4 2 7 Data Recorder , Event ...................... 5 8 Dealer Service .......................... 3 6 9 Defroster , Rear W indow ................... 1 5 8 Defroster , W indshield ................... 70,244 Delay (Intermittent) W ipers ................. 1 3 1 Diag[...]

Emergency , In Case of Jacking ............................. 3 5 2 Jump Starting ......................... 3 5 8 T owing ............................. 3 6 1 Emission Control System Maintenance ...... 367,408 Engine ............................... 3 6 5 Break-In Recommendations ................ 6 8 Checking Oil Level ..................... 3 6 9 Cool[...]

Fluid Level Checks Automatic T ransaxle .................... 3 8 6 Power Steering ........................ 2 8 6 Fluids ................................ 4 0 5 Fluids, Lubricants and Genuine Parts .......... 4 0 5 Fog Lights ....................... 124,177,400 Folding Rear Seat ........................ 1 2 0 Folding Rear Seat (Sedan) ...............[...]

Gearshift .............................. 2 6 2 General Information ................. 19,109,328 General Maintenance ..................... 3 6 9 Glass Cleaning .......................... 3 9 2 Gross Axle W eight Rating .................. 3 3 7 Gross V ehicle W eight Rating ............. 335,337 Hands-Free Phone (UConnect 威 ) .............. 8 1 Haz[...]

Integrated Power Module (Fuses) ............ 3 9 4 Interior Appearance Care .................. 3 9 1 Intermittent W ipers (Delay W ipers) ........... 1 3 1 Introduction ............................. 4 Jack Location ........................... 3 5 3 Jack Operation ....................... 352,354 Jacking Instructions ...................... 3 5 4 Jump[...]

Electronic Stability Program (ESP) Indicator ......................... 297,299 Engine T emperature W arning .............. 1 7 0 F o g .......................... 124,177,400 Headlight Switch ...................... 1 2 3 Headlights ........................... 1 2 3 High Beam Indicator .................... 1 6 8 Instrument Cluster ...................[...]

Maintenance Schedule .................... 4 0 8 Malfunction Indicator Light (Check Engine) ....................... 176,367 Manual, Service ......................... 4 3 1 Manual T ransaxle .................. 256,258,386 Downshifting ......................... 2 6 0 Fluid Level Check ................... 387,388 Frequency of Fluid Change ............ [...]

Materials Added to ..................... 3 7 1 Recommendation ................... 370,404 Synthetic ............................ 3 7 1 V iscosity ............................ 3 7 1 Onboard Diagnostic System .............. 366,367 Opener , Garage Door (HomeLink 威 ) ........... 1 3 6 Operator Manual (Owner’s Manual) ............ 5 Outside Air Int[...]

Radial Ply T ires ......................... 3 1 2 Radio Operation ........................ 2 4 2 Radio, Satellite .......................... 2 3 4 Rear Axle (Differ ential) .................... 3 8 7 Rear Drive Assembly ..................... 3 8 7 Rear Liftgate (Sedan) ...................... 3 4 Rear Seat, Folding ....................... 1 2 0 Rear[...]

Satellite Radio Antenna ................... 2 3 6 Schedule, Maintenance .................... 4 0 8 Seat Belt Maintenance .................... 3 9 3 Seat Belt Reminder ....................... 4 6 Seat Belts .............................. 3 6 Adjustable Shoulder Belt .................. 4 2 Adjustable Upper Shoulder Anchorage ........ 4 2 And Pregnant[...]

Slippery Surfaces, Driving On ............... 2 6 6 Snow Chains (T ire Chains) ................. 3 1 8 Snow T ires ............................ 3 1 8 Spare T ire ....................... 312,313,353 Specifications O i l ................................ 3 7 0 Speed Control (Cruise Control) ........... 134,173 Speedometer ........................... 1[...]

T ire Safety Information .................... 3 0 0 T i r e s ............................ 70,309,432 Aging (Life of T ires) .................... 3 1 5 Air Pressur e .......................... 3 0 9 Chains .............................. 3 1 8 Changing ............................ 3 5 2 Compact Spare ........................ 3 1 2 Flat Changing ....[...]

T railer and T ongue W eight ............... 3 4 1 W iring .............................. 3 4 5 T railer T owing Guide ..................... 3 4 0 T railer W eight .......................... 3 4 0 T ransaxle ............................. 2 6 0 Automatic .................... 12,256,260,386 Autostick ............................ 2 6 4 Manual ........[...]

V oice Recognition System (VR) .............. 1 0 9 W arning Lights (Instrument Cluster Description) ............. 1 6 7 W arning, Roll Over ........................ 4 W arnings and Cautions ..................... 7 W arranty Information ..................... 4 3 0 W asher , Adding Fluid ..................... 3 7 6 W ashers, W indshield ............[...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power [...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power [...]

P A TRIO T 2009 P A TRIO T Chrysler LL C 81-326-0912 First Edition Printed in U.S.A. 2009 ow ner’ s man ua l I n f o r m a t i o n P r o v i d e d b y :[...]