John Deere 755C-II инструкция обслуживания

C SERIES II MODEL NO. CONSTRUCTION EQUIPMENT CRAWLER LOADERS 655C-II 755C-II[...]

Introducing two good machines made great: the 655C and 755C Series II. These new- and-impro v ed loaders feature significant, contractor-driven enhancements including an optimized po wer management system, more r esponsiv e steering, an increased low speed range, and several design changes to enhance operator comfort and conv enience. All of this a[...]

KEY SPECIFICA TIONS 655C-ll 755C-ll NET HP 130 177 33,950 46,300 OPERA TING WEIGHT 2.35 cu. yd. 3.14 cu. yd. ST AND ARD BUCKET 27,675 lbs. 37,080 lbs BREAKOUT FORCE 23,086 lbs. 30,418 lbs. ST A TIC TIPPING LOAD CRAWLER LOADERS 655C-II 755C-II KEY SPECIFICA TIONS 655C-ll 755C-ll NET HP 130 177 33,950 46,300 OPERA TING WEIGHT 2.35 cu. yd. 3.14 cu. yd[...]

Multi-tasking made easier F or more than 25 y ears, full-featur ed hy drostatic drivetrains hav e pro vided J ohn Deere crawler owners with unsurpassed operating ease and flexibility . N ow with our new optimized power management system, y ou ’ll feel more power when y ou need it, and an ov erall better engine/tranmission performance match. That [...]

Just set maximum desired ground speed and the crawler does the rest. As the loads change, the drivetrain responds, automatically powering up or down to maintain peak engine rpm and efficiency. Innovative control system keeps these loaders tracking straight in either direction or on level ground or steep slopes. Delivers smooth, predictable turns un[...]

Room with a view Spacious walk-through air-conditioned cab is standard. Visibility is virtually unobstructed, with a large tinted windshield providing a panoramic view of the work ahead. Series II enhancements include improved steering response. Pedal steering now better matches pedal movement so steering is smooth and predictable, even on rough te[...]

New standard V-pattern control for forward/reverse travel and ground speed is positioned closer to the operator for convenience. Speed-range control switch and horn button are now more conveniently located to keep the operator focused on the work. Load-sensing hydraulic system delivers smooth, low-effort, combined function metering and control. Pus[...]

The C-Series-II Loaders ’ oscillating track frames have a unique cushioned front piv ot shaft that absorbs shock loads and greatly enhances the ride, for smooth mov es and good grading ability . S tandard equipped with wider pads and longer track frames than most other crawler loaders, the 655C-II and 755C-II’ s tipping load capacities are impr[...]

Generous track on the ground, oscillating track frames, cushioned pivot shaft, and 52-degree bucket rollback help keep the bucket heaped when transporting material on slopes or across rough terrain. Lubricated chain keeps lubricant between pins and bushings sealed in, abrasives out for long life. Rollers and idlers are sealed, too. Maintenance-free[...]

As maintenance free as a crawler can be W et-sleev e engines with gear-driven water pumps. Lifetime-lubricated bucket pins. W eekly loader lube points. These crawlers ar e literally loaded with features that minimize maintenance. Daily checks are accomplished on the same side. Ev en periodic ser vice points are conveniently grouped, with many prote[...]

Sight gauges let you check hydraulic and drive system fluid levels quickly. Bolt-on rod guides are easy to remove, should cylinder repair ever become necessary. Lockable doors swing open wide to simplify fluid and filter checks, changes, and additions. Daily checks are accomplished on one side. Cab can be tilted in less than ten minutes for easier [...]

SPECIFICATIONS SERIES II LOADERS 655C-II 755C-II Engine 655C-II 755C-II Type ..........................................................................Liebherr D 924 T-EA1 water-cooled and turbocharge d Liebherr D 926 T-EA2 water-cooled, turbocharged, and diesel; Tier II emissions compliant intercooled diesel; Tier II emissions compliant Rated powe[...]

13 Undercarriage 655C-II 755C-II John Deere Dura-Trax™ features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated; full- length track frame covers reduce material buildup and ease cleaning Sprocket ....................................................................[...]

14 Dimensions 655C-II 755C-II Rounded to the nearest whole number. A Height over cab (including grousers) ...................123 in. (3129 mm) 130 in. (3304 mm) B Height over exhaust pipe .....................................122 in. (3092 mm) 125 in. (3186 mm) C Length to front of track .......................................171 in. (4339 mm) 189 i[...]

15 Multipurpose Bucket with Bolt-on Teeth 655C-II 755C-II Capacity heaped (ISO 7546) ................................2.1 cu. yd. (1.6 m 3 ) 2.6 cu. yd. (2.0 m 3 ) Breakout force ....................................................24,525 lb. (11 120 kg) 35,283 lb. (16 000 kg) Static tipping load ...............................................21,226 [...]

DKA655CII Litho in U.S.A. (03-03) Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 6270B, using No. 2-D fuel at 35 API gravity. No derating is required up to 10,000 ft. (3050 m) altitude for both the 655C-II and 755C-II. Specifications and de[...]