Jura E70 инструкция обслуживания

IMPRESSA E70/75 Instructions for use 2/02 Art. Nr. 62564[...]

Jura Impressa E70/75 English ................................................................................................................ 6 – 19 Legend:  DISPLAY: serves as information.  DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld[...]

Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9[...]

7 8 9 11 12 13 14 15 16 17 18 6 5 4 3 2 1 10 8 8b 8a Operating elements Jura Impressa E70/75 1 Water quantity switch 2 Powder coffee selection switch 3 Coffee key for 2 cups 4 Rinsing-, cleaning-, descaling key 5 Coffee key for 1 cup 6 ON/OFF switch 7 Display dialogue system 8 Key P 8a Key  8b Key  9 Water tank with carrying handle 10 Height-[...]

5 Contents Jura Impressa E70/75 1. Description .................................................. page 6 2. Safety instructions ........................................ page 6 2.1 Warnings .............................................. page 6 2.2 Safety precautions .................................. page 6 3. Preparation of the machine ............[...]

6 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine for the first time and keep them in safe place for easy reference in future. Should you require further information or should particular prob- lems occur that are not dealt with in sufficient detail [...]

7 3. Preparation of the machine 3.1 Checking the mains voltage The machine is set to the correct voltage before leaving our factory. Ensure that your mains voltage corresponds to the details quoted on the rating plate attached to the bottom of the machine. 3.2 Checking the fuse The machine is designed for a current of 10 Amps. Check that the fuse u[...]

8 The symbols on the display mean: HARDNESS LEVEL — Water hardness function switched off HARDNESS German water hardness 1 – 7° LEVEL 1 French water hardness 1.79 – 12.53° HARDNESS German water hardness 8 – 15° LEVEL 2 French water hardness 14.32 – 26.85° HARDNESS German water hardness 16 – 23° LEVEL 3 French water hardness 28.64 ?[...]

9 6. Adjusting the water quantity The water quantity can be infinitely adjusted with rotary knob (1). The small key means little water for espresso, the large cup means a lot of water for coffee.  SELECT PRODUCT  Turn the water quantity rotary knob into the position at which the required amount of water appears on the display: 1 30 ML – 90 [...]

10 Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container. Make sure that the coffee powder which you use is not ground too finely. This can lead to bl[...]

11  When you have reached the required quantity of hot water, turn the steam/hot water rotary knob (15) back to the position .  SELECT PRODUCT At the start of a water draw-off, there can be splashes. The pivoting nozzle gets hot. Please avoid direct contact with the skin. 10. Switching machine off When the machine is switched off, the rinsing[...]

12 12.4 Fill beans  FILL BEANS  Fill beans as described in Chapter 3.4. The display FILL BEANS only goes off after coffee has been drawn off. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch the machine off for this purpose. 12.5 Clean unit  CLEAN UNIT After 200 draw-offs or 160 ri[...]

13 12.8 Insert filter  Pull up the cartridge holder. Pressing gently, put the filter cartridge into the water tank (Fig. 7).  Close the cartridge holder until it engages audibly.  Fill the water tank with cold fresh tap water and put it back into the machine.  Switch the machine on with the ON/OFF switch.  Press the key P until you h[...]

14 12.10 General cleaning instructions  Never use abrasive articles or corrosive chemicals to clean your machine.  Wipe down the casing on the inside and out using a soft, damp cloth.  Clean the pivoting nozzle after each use.  After heating milk, draw off a little hot water in order to clean the inside of the pivoting nozzle.  You c[...]

15  ADD TABLET (Fig. 9) / PRESS RINSE  UNIT CLEANING / PLEASE WAIT  An acoustic signal can be heard.  EMPTY TRAY Wait for about 10 seconds before you put the drip tray back in again.  PRESS RINSE  UNIT CLEANING / PLEASE WAIT  An acoustic signal can be heard.  EMPTY TRAY  SELECT PRODUCT After each cleaning operation the fi[...]

16  FILL WATER / OPEN TAP / PRESS RINSE  Turn the selector switch for coffee or hot water / steam (13) to position and press the rinsing key .  UNIT DECALCING / PLEASE WAIT  An acoustic signal is heard.  EMPTY TRAY  CLOSE TAP  UNIT DECALCING / PLEASE WAIT  The water is guided into the drip tray in the interior of the machine[...]

17 17. Messages Cause Action SYSTEM EMPTY System empty Fill system (see point 4.1) FILL WATER The tank is empty Fill with water Floater defective Rinse out or descale water tank FILL BEANS The bean container is empty Fill up with beans Although beans have been poured in, Draw off a cup of coffee. the display remains on ”FILL BEANS” only goes of[...]

18 18. Problems Problem Cause Action Grinder is very noisy – foreign body in grinder – Drawing off coffee with pre-ground powder – is still possible – Have machine examined by Jura service centre Not enough froth when – milk not suitable – use full-cream milk frothing milk – frothing aid blocked – clean frothing aid – frothing aid[...]

19 20. Technical data Voltage: 230V AC Power consumption: 1350 W Fuse: 10 A Safety check: Energy consumption standby: approx. 3 Wh Energy consumption ready to make coffee: approx.17 Wh Pump pressure: max. 15 bar Water tank: 1.9 litres Capacity, bean container: 200 gr. Capacity, grounds container: max. 16 port. Cable length: approx. 1,1 m Weight: 8,[...]