JVC 0801-Ki-NV-JET инструкция обслуживания

COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. T o make sure you understand how to use your new TV , please read this manual thoroughly before you begin. A V -21L91 A V -25L91 A V -29L91 Contents Safety precautions 2 Preparation 2 1 Insert the batteries into the remote control ... 2 2 Connecting the aerial and VCR .[...]

2 Safety pr ecautions W ARNING • T o prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV . • A void damaging the power cord and mains plug. When you unplug the TV , pull it out by the mains plug. Do not pull on the power cord. • Never block or c[...]

3 Prepar ation 2 Connecting the aerial and VCR • Read the manuals pr ovided with the de vices. Depending on the device , the connection method may be differ ent from the diagrams . Also the de vice settings may need to change depending on the connection method. • T urn off all the devices including the TV . • Connecting cables are not supplie[...]

4 Prepar ation 3 Connecting other devices If you ar e not connecting any other de vices, skip step 3 and perform step 4. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speaker s go off. • The OUTPUT terminal outputs the video and sound signals which you are vie wing on the TV . Y ou ca[...]

5 Prepar ation 5 Initial setting When the TV is first turned on, it enter s the initial setting mode , and the JVC logo is display ed. F ollo w the instructions on the on-screen displa y to perform the initial settings. 1 Press the Main power button on the TV . The PO WER lamp lights . After the JVC logo has been displa yed, the TV automatically sw[...]

6 Basic operation RM-C353 REMOTE CONTROL UNIT DISPLAY MENU POWER CHANNEL VOLUME SYSTEM COLOUR OFF TIMER TV/VIDEO PICTURE MODE CHANNEL SCAN ECO SENSOR SOUND MUTING RETURN I/I I 123 456 78 0 9 -/-- 1 Press the POWER button to turn your TV on. • If your TV does not turn on, press the Main pow er button on the TV then press the PO WER button again. ?[...]

7 Remote contr ol buttons and functions ECO SENSOR button Y ou can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of y our room. This function reduces e y e str ain and the pow er consumption of this TV . Press this button to select the desired mode. DIGIT AL ECO SENSOR DISPLA Y : The ECO[...]

8 Remote control buttons and functions button Y ou can select a sound setting for stereo broadcast pr ogrammes and bilingual progr ammes. Press this button to select a sound setting. : Stereo sound : Bilingual I (sub I) sound : Bilingual II (sub II) sound : Monaural sound MONO : Cancels the multi-sound function, and the sound becomes monaural. • [...]

9 Remote control buttons and functions CHANNEL SCAN button Y ou can quickly view all TV channels progr ammes that you can vie w on your TV , and search for the pr ogr amme you w ant to view . 1 Press this button to start scanning TV channels. The TV channel pr ogrammes are each display ed for sev eral seconds . • The programmes of TV channels for[...]

10 Using the TV’ s menus This TV has a number of functions you can oper ate using the menus. T o use all your TV’ s functions fully , you need to under stand how to use the menus . 4 Press the MENU M buttons to change function settings. Example: MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE [...]

11 Using the TV’ s menus INPUT Y ou can view images fr om VCRs or other devices connected to y our TV . 1 Press MENU T to display the “ MENU 1 ” menu, then select “ INPUT ” . MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00 SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y 2 Press MENU M to select “ VIDEO 1 ” , “ VIDEO 2 ” or “ [...]

12 Using the TV’ s menus AUTO SHUTOFF Y ou can set your TV to turn off if no signals are r eceived for about 15 minutes or longer after the end of a broadcast. 1 Press MENU T to display the “ MENU 2 ” menu, then select “ AUTO SHUTOFF ” . MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY -[...]

13 Using the TV’ s menus Picture Adjustments Y ou can adjust the picture as you lik e . 1 Press MENU T to display the “ MENU 4 ” menu. MENU 4 TINT COLOUR BRIGHT CONT. SHARP SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y 2 Press MENU T to select an item and press MENU M to adjust it. TINT* - : R eddish + : Greenish COLOUR - : Lighter + : Deeper BRI[...]

14 Using the TV’ s menus AI VOLUME Y ou can prevent the sudden incr ease or decrease of v olume that occurs when changing channels or switching VIDEO modes. 1 Press MENU T to display the “ MENU 5 ” menu, then select “ AI VOLUME ” . MENU 5 BASS TREBLE BALANCE AI VOLUME ON SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y 2 Press MENU M to select ?[...]

15 Using the TV’ s menus MANUAL CH PRESET Y ou can manually preset desir ed TV channels to desired channels . 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL CH PRESET ” . MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y 2 Press MENU M . The sub-menu is display ed. MANUA[...]

16 Using the TV’ s menus SKIP Y ou can set undesir ed channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SC AN button. • Channels to which TV channels hav e not been preset ar e automatically set to be skipped. 1 Press MENU T to display the “ MENU 3 ” menu, then select “ MANUAL C[...]

17 TV buttons and parts Front <A V -29L9 1> <A V -2 1L9 1 and A V -25L9 1> Rear 1 Headphone jack 2 VIDEO-3 terminal 3 MENU button 4 CHANNEL m buttons 1 VIDEO-1 INPUT terminal 2 COMPONENT (VIDEO-2) INPUT terminal 3 OUTPUT terminal 4 Aerial socket 4 3 2 1 VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT V MONO L / V Y / V L MONO L / C B [...]

18 Using the buttons on the TV Basic operation • Check to make sur e the CHILD LOCK function is set to “ OFF ” . When the CHILD LOCK function is set to “ ON ” , the TV cannot be operated using the front contr ol buttons. F or details, see “ CHILD LOCK ” on page 12. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press CHANNEL[...]

19 T roubleshooting If there is no pictur e or the TV does not operate normally , make sure the problem isn ’ t due to the reasons indicated belo w . If the problem per sists ev en after taking the measures indicated, please contact a service technician. Cannot turn the TV on • Press the Main po wer button on the TV . • Connect the power cor [...]

Specifications TV RF systems B, G, I, D, K, K1, M Colour systems P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and frequencies VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT : VIDEO input,[...]