JVC DT-V20L1 инструкция обслуживания

INSTR UCTIONS DT -V24L1D DT -V24L1 DT -V20L1D DT -V20L1 MUL TI FORMA T LCD MONIT OR Ta b le of Contents Safety Precautions .............................................. 2 IMPOR T ANT SAFEGU ARDS ........................... 2 Maintenance ..................................................... 3 Installation ...........................................[...]

2 Safety Precautions W ARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS V ASES, SHALL BE PLACED ON THE APP ARA TUS. IMPOR T ANT SAFEGU ARDS Electrical energy can perform many useful functions. This unit has been engineered and man ufactured to assure your p[...]

3 • Bef ore connecting other products such as VCR’ s and personal computers, you should turn off the power of this product for protection against electric shoc k. • Do not use attachments not recommended b y the manufacturer as the y may be hazardous . • When replacement parts are required, be sure the service technician has used replacemen[...]

4 Installation CA UTION • Do not rest your arm on the monitor or lean against the monitor . • Do not hold the LCD panel when installing the monitor . • Make sure to install the monitor securely to pre vent the monitor from f alling over , which causes damage to the monitor or injury . 7 Using the monitor on the stand Y ou can place the monito[...]

5 7 Installing the monitor in the rac k Use a JVC’ s RACK MOUNT AD APTER (RK-C20L1; not supplied). CA UTION • Detach the stand first. • Ask your dealer to install. To adjust the stand height Y ou can select the stand height—higher position or lower position. To change the stand height, change the position of the stand plate as illustrated b[...]

6 Daily Operations / Connections 7 Fr ont panel w AREA MARKER button/lamp Activates/deactiv ates the settings of “MARKER SELECT , ” “ASPECT SELECT , ” “R-MARKER SELECT” and “R-ASPECT SELECT” in “AREA MARKER” ( ☞ page 10). NO TE • This function wor ks when the picture is displa yed in 16:9 aspect ratio . • The functions do [...]

7 1 Display the men u. To display the main menu Press MENU button. To display the set-up menu Press button while pressing button. 2 Press buttons to select an item, then press button. 3 Press buttons to select an item, then press buttons to make adjustments. 4 Press MENU button to return to the previous menu. • Pressing the b utton again fini[...]

8 7 Rear panel Daily Operations / Connections (cont.) • The pro vided power cord holder pre vents accidental disconnection of the A C power cord from the A C inlet. • The po wer cord holder consists of two par ts, a case and a co ver . 1 Attach the power cor d holder case around the A C inlet on the rear of the monitor with two scre ws (pro vid[...]

9 7 A v ailable signals The follo wing signals are av ailable f or this monitor . Video signals No. Signal name Input terminal VIDEO (INPUT1, INPUT2) COMPO./RGB (Analog component/ analog RGB) HD/SD SDI (IN 1, IN 2) * 1 (DT -V24L1D and DT -V20L1D only) DV I-D (HDCP) (Digital component/digital RGB) 1 NTSC √ ——— 2P A L √ ——— 3 SECAM ?[...]

10 Menu Configuration —MAIN MENU PICTURE IMPROVEMENT Setting for the picture quality Item To do Setting value MO VING PICTURE * 1 Reduce the lag of moving pictures which is peculiar to LCD . OFF , ON APERTURE FREQ. * 2 Select the frequency of the luminance signal compensated in “APERTURE LEVEL. ” OFF , LOW , HIGH APERTURE LEVEL * 2 Compensate[...]

11 Setting of “sub menu POSI. ” The setting values and f eatures are as f ollows. LO WER1 : Displa ys the current setting and adjustment bar at the lower part of the screen. UPPER1 : Displays the current setting and adjustment bar at the upper part of the screen. LO WER2 : Displa ys the current setting at the lower part of the screen. UPPER2 : [...]

12 Menu Configuration —SET -UP MENU FUNCTION SETTING Setting for the tally lamp Item T o do Setting value T ALL Y SELECT Select the color of the tally lamp on the upper front panel. GREEN, RED T ALL Y BLINK Select the blinking time of the tally lamp till it gets lighting. OFF , 5sec., 8sec. NO TE The tally lamp is controlled using MAKE/TRIG. term[...]

13 Operation guide Shows the b uttons for each operation. NO TE • The menu automatically disappears in about 30 seconds after the last menu operation. • Some items may not appear on the men u depending on the input or the input signal. These items are not a vailab le. REMOTE SETTING Setting for the e xternal control Item T o do Setting value SE[...]

14 7 Using the MAKE/TRIGGER system MAKE/TRIG. terminal is configured as follows . Y ou can assign a function to each pin terminal in “REMO TE SETTING” ( ☞ “POR T F1” – “POR T F6” on page 13). Pin No. Pin name Pin No. Pin name 1 PORT F1 5 PORT F5 2 PORT F2 6 PORT F6 3 PORT F3 7 Exter nal control * 3 4 PORT F4 8 GND * 3 The external c[...]

15 7 Using the serial comm unication Y ou can control the monitor from a personal computer etc. via RS-485 or RS-232C ter minal. • Consult y our dealer if you want to kno w the detail of the external control specification. <Communication specifications> Input terminal Cable Te rminal specification Communication specifications RS-485 A strai[...]

16 T roubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the prob lem, unplug the monitor and consult an authorized dealer or ser vice center . Symptom Probable cause and corrective action Pa ge No power supply • Firmly inser t the power plug. 8 No picture with the [...]

17 Specifications 7 General Model name DT -V24L1D/DT -V24L1 DT -V20L1D/DT -V20L1 T ype Multi format LCD monitor Screen size T ype 24 wide format T ype 20 wide format Aspect ratio 16:10 LCD panel 24˝ wide, active matrix TFT 20˝ wide, active matrix TFT Effectiv e screen size Width : 518.4 mm (20 3 / 8 ˝ ) Height : 324 mm (12 3 / 4 ˝ ) Width : 433[...]

18 The illustrations of the monitor are of DT -V24L1D. The illustrations of the monitor are of DT -V20L1D. Specifications (cont.) 564 (22 1 / 4 ) 99 (4) 51.9 (2 1 / 8 ) 100 243 (9 5 / 8 ) 300 (11 7 / 8 ) DT -V20L1D/DT -V20L1 <F ront view> <Side view> <Rear view> 477 (18 7 / 8 ) 100 300 (11 7 / 8 ) VESA mounting holes (Size: M4, de[...]

DT-V2420L1D_UA_R.indd 19 DT-V2420L1D_UA_R.indd 19 06.11.17 10:40:27 AM 06.11.17 10:40:27 AM[...]

DT -V24L1D/DT -V24L1/DT -V20L1D/DT -V20L1 MUL TI FORMA T LCD MONIT OR © 2006 Victor Company of J apan, Limited 1106MKH-MW -VP DT-V2420L1D_UA_R.indd 20 DT-V2420L1D_UA_R.indd 20 06.11.17 10:40:27 AM 06.11.17 10:40:27 AM[...]