JVC GET0260-015A инструкция обслуживания

CD RECEIVER KD-G312 INSTRUCTIONS GET0260-015A [B] For canceling the display demonstration, see page 7. Cover_KD-G312[B]f.indd 2 Cover_KD-G312[B]f.indd 2 6/7/05 5:42:20 PM 6/7/05 5:42:20 PM[...]

2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the unit; leave[...]

3 How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 How to detach/attach the control panel ................................................... 4 Control panel — KD-G312 ......... 5 Parts identificat[...]

4 How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this unit” (see page 20). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press and hold un[...]

5 Control panel — KD-G312 Parts identification 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p Remote sensor • You can control this unit with an optionally purchased remote controller. • DO NOT expose the remote s[...]

6 Getting started Basic operations ~ Ÿ You cannot select “CD” as the playback source if there is no disc in the loading slot. ! Volume level appears. Volume level indicator ⁄ Adjust the sound as you want. (See page 15.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting:[...]

7 Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 16. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour, minute, and clock system. 1 Select “CLOCK H” (hour), then adjust the hou[...]

8 When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure so that the MO indicator goes off. Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM ([...]

9 3 “SSM” flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select[...]

10 What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this unit can do the following: • Programme Type (PTY) Search (see left column) • Temporarily switches to Traffic Announcement—TA Standby Reception (see page 11) • Tempora[...]

11 4 Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level (see page 17). To activate TA Standby Reception The TP indicator either lights up or flashes. • If the [...]

12 Disc operations Playing a disc All tracks will be played repeatedly until you change the source or eject the disc. About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: * Either the MP3 or WMA in[...]

13 To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digit numbers at the beginning of their folder names—01, 02, 03, and so on. • To select a particular t[...]

14 Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. FLDR RP T * : All tracks of the current folder. • and RPT light up. [...]

15 2 Indication pattern changes as you adjust the level. Ex.: When “TRE” is selected Indication Range BAS * 4 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE * 4 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD * 5 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the le[...]

16 Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOC K H Hour adjustment 0 – 23 (1 – 12), [7] [Initial: 0 (0:00)] CLOC K M Minute adjustment 00 – 59, [7] [Initial: 00[...]

17 Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF : [Initial]; Switches to another station (the programme may differ from the one currently received), [11]. • The AF indicator lights up. AF REG : Switches to another sta[...]

18 Main elements and features 1 (standby/on attenuator) button • Turns on and off the power and also attenuates the sound. 2 SRC (source) button • Selects the source. 3 R (reverse) / F (forward) buttons • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes the tracks of the disc. [...]

19 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player in the f[...]

20 More about this unit Basic operations Turning on the power • By pressing CD or FM/AM on the unit, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations[...]

21 • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs. Playing an MP3/WMA disc • This unit can play ba[...]

22 Symptoms Remedies General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect t[...]

23 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. L[...]

© 2005 Victor Company of Japan, Limited EN 0605DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G312[B]f.indd 2 Rear_KD-G312[B]f.indd 2 6/7/05 5:42:14 PM 6/7/05 5:42:14 PM[...]