JVC GET0287-003A инструкция обслуживания

ENGLISH FRANÇAIS CD RECEIVER RECEPTEUR CD KD-S1501/KD-G152/KD-G151 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0287-003A [EX/EU] For canceling the display demonstration, see page 7. Pour annuler la démonstration[...]

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the uni[...]

3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-S1501/ KD-G152/KD-G151 ................... 5 Parts identification ................................. 5 Getting started .[...]

4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 21). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press[...]

5 ENGLISH Control panel — KD-S1501/KD-G152/KD-G151 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p EQ (equalizer) button q MO (monaural) button w SSM (Strong-station Sequential Memory) button e CD butto[...]

6 ENGLISH Getting started Basic operations ~ Ÿ You cannot select “CD” as the playback source if there is no disc in the loading slot. ! Volume level appears. Volume level indicator ⁄ Adjust the sound as you want. (See pages 15 and 16.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on[...]

7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 17. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour, minute, and clock system. 1 Select “CLOCK H” (hour), then adjust[...]

8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step Ÿ above... 1 2 Select the[...]

9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 12. Storing stations in memory You can preset six stations for each band. FM station automatic presetting [...]

10 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. ~ The last selected PTY code appears. Ÿ Select one of your favorite programme type. or Select one of the twenty-nine PTY codes. Ex.: When “ROCK M” is selected ! Start searching[...]

11 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 10) • Standby Reception of Traffic Announcement —TA (see the following) or your favorite [...]

12 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). When shipped from the factory, Netw[...]

13 ENGLISH Disc operations Playing a disc All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To [...]

14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. To check the current clock time while listening to a disc Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK[...]

15 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSI[...]

16 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the [...]

17 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOC K H Hour adjustment 0 – 23 (1 – 12), [7] [Initial: 0 (0:00)] CLOC K M Minute adjustment 00 – 59, [7] [Ini[...]

18 ENGLISH Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak.... AF: [Initial]; Switches to another station (the programme may differ from the one currently received), [12]. • The AF indicator lights up. AF REG : Switches to ano[...]

19 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN18-23_KD-S1501[EX_EU]f.indd 19 EN18-23_KD[...]

20 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player [...]

21 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased [...]

22 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • This receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset[...]

23 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): Front: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

KD-S1501/KD-G152/KD-G151 Installation/Connection Manual Manuel d’installation/raccordement GET0287-010A [EX/EU] 1004DTSMDTJEIN EN, FR ENGLISH This receiver is designed to operate on 1 2 V D C, NEGA TI VE gr ound el ec tric al system s . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR[...]

ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the receiver. • B e sur e to gr oun d this r ec eive r to th e ca r ’ s chas sis a gai n af ter i nst all atio n. Notes: • Replace the fuse with one of the specified rating.[...]

© 2004 Victor Company of Japan, Limited EN, FR 1004DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Rear_KD-S1501[EX_EU]f.indd 2 Rear_KD-S1501[E[...]