JVC HV-28P40BJ инструкция обслуживания

HV-32/28P40BJ / LCT1687-001A-U / All Cover Cover01 COLOUR TELEVISION INSTRUCTIONS HV-32P40BJ HV-28P40BJ HV-32&28P40BJ_Eng.book Page 1 Thursday, July 2 9, 2004 9:25 AM[...]

HV-32/28P40BJ / LCT1687-001A-U / English  Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power poin ts in your home or the cable is too short to reach a power point, then obtain an appropriate safety ap proved extension lead or adaptor or cons ult your dealer. If nonetheless the mains plug i[...]

1 HV-32/28P40BJ / LCT1687-001A-U / English How to move the TV When moving the T V, make sure that it is held by two people as shown in the illustration. Be caref ul not to trap your hands when putting the TV down. 1 2 3 HV-32&28P40BJ_Eng.book Page 1 Thursday, July 2 9, 2004 9:25 AM[...]

2 HV-32/28P40BJ / LCT1687-001A-U / English Thank you for buying this JVC colour television. To make sure you understand how to use your new TV , please read this manual thoroughly before you begin. Failure to take the following prec autions may result in damage t o the TV or remote control. DO NOT block the TV’s vent ilation openings or holes. (I[...]

3 HV-32/28P40BJ / LCT1687-001A-U / English To enjo y even bett er picture quality The picture quality of this TV is controlled by a combination of three functions (PICTURE MODE, DIGITAL VNR, and Super DigiPure). By adjusting these three functions, you can change the picture quality to suit your preferences. The initial settings of the thre e functi[...]

4 HV-32/28P40BJ / LCT1687-001A-U / English CONTENTS Setting up your TV ............. .............. ........5 Connecting the aerial and video cassette recorder ( VCR) .............. .......... ............. .. 5 Connecting the power cord to the AC outlet. ............. .......... ............. ........... ....... 6 Putting the batteri es into the r[...]

5 HV-32/28P40BJ / LCT1687-001A-U / English Setting up your TV Caution • Turn off all the equipment includi ng the TV before connecting anything. Connecting the aerial and vide o cassette recorder (VCR) • The connecting cabl es are not provided. • For further details, refer to the manuals provided with th e devices to be connected.  If you [...]

6 Setting up your TV HV-32/28P40BJ / LCT1687-001A-U / English Connecting the power cord to the AC outlet Caution • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks. Putting the batteries into [...]

Setting up your TV 7 HV-32/28P40BJ / LCT1687-001A-U / English 2 Press the a button The LANGUAGE menu appears. 3 Press the 6 buttons to choose ENGLISH. Then press the a button The on-screen display wi ll then be in English. The COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function. There are two COUNTRY menus. Pressing the yellow button c[...]

8 Setting up your TV HV-32/28P40BJ / LCT1687-001A-U / English 6 Press the a button to display the T-V LINK menu If you do no t have a T-V L INK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears. If you have a T-V LINK compa tible VCR connected to the EXT-2 terminal: Follow the operating procedure ?[...]

Setting up your TV 9 HV-32/28P40BJ / LCT1687-001A-U / English • If you have any questi ons about the items in the Broadcast Selection menu or how to operate the menu, pl ease contact your cable TV station. • If you do not want to use the ACI function, press the 6 butto ns to choose ACI SKIP and then press a . • When the cable TV broadcast rec[...]

10 Setting up your TV HV-32/28P40BJ / LCT1687-001A-U / English T-V LINK functions When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK func tions: A “T-V LINK compatible VCR” means a JVC video cassette rec order[...]

11 HV-32/28P40BJ / LCT1687-001A-U / English TV buttons and functions See the pages in brackets for details. 1 A (main power) button (pages 6, 11) 2 Power lamp (pages 6, 11) 3 Remote contro l sensor 4 r (Volume) button (page 11) 5 P p buttons/ q buttons (page 11) 6 Headphone jack (mini jack) (page 42) 7 EXT-5 terminal (pages 39, 42) Turn the main po[...]

12 HV-32/28P40BJ / LCT1687-001A-U / English Remote control buttons and functions 1 Muting button 2 Number butt ons 3 Information button 4 c button 5 i button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = d (Favourite) button ~ # (Standby) button ! VCR/TV/DVD switch @ G button # Colour button[...]

Remote control buttons and functions 13 HV-32/28P40BJ / LCT1687-001A-U / English Choose a TV channel and watch images from external devices  Use the number buttons: Enter the programme number (PR) of the channe l using the number buttons. Example: •P R 6 → press 6 • PR 12 → press 1 and 2  Use the p p buttons: Press the p p butt ons to[...]

14 Remote control b uttons and functions HV-32/28P40BJ / LCT1687-001A-U / English • The VCR sends its playback image along the aerial ca ble as an RF (radio frequency) signal. • Also see your VCR instruction manual. Adjust the volume Press the r q buttons to adjust the volume. The volume level indica tor appears and the volume changes as you pr[...]

Remote control buttons and functions 15 HV-32/28P40BJ / LCT1687-001A-U / English ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen S ignalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal[...]

16 Remote control b uttons and functions HV-32/28P40BJ / LCT1687-001A-U / English  Adjustin g the visibl e area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicator[...]

Remote control buttons and functions 17 HV-32/28P40BJ / LCT1687-001A-U / English Using the “Multi-p icture” function 1 Press the X button The “Multi-pict ure” menu appea rs. 2 Press the 5 buttons to choose the number of screens and then press the a button 2-pictures multi: 12-pictures multi: • When set to 2-pictures multi, the main- pictu[...]

18 Remote control b uttons and functions HV-32/28P40BJ / LCT1687-001A-U / English • When set to 2-pictures multi and the headphones are connected, the sound for the main-picture is output from the TV speakers and the sound from the sub-picture is output from the headphones. - Adjust the volume of the sub -picture sound from the headphones with ?[...]

Remote control buttons and functions 19 HV-32/28P40BJ / LCT1687-001A-U / English Favourite channel function You can register your favourite TV ch annels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4.  Favourite channel reg istration 1 In[...]

20 Remote control b uttons and functions HV-32/28P40BJ / LCT1687-001A-U / English Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player. Pressi ng a button that looks the same as the device’s original remote control button has the same effe ct as the original remote control. 1 Set the VCR/TV/DVD Switch t[...]

21 HV-32/28P40BJ / LCT1687-001A-U / English Teletext function Basic operation 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TV/DVD swit ch to the TV position 3 Press g (Text) button to display the tele text Pressing g (Text) button changes the mode as follows: 4 Choose a tele text page by pres sing the p p buttons, numbe r buttons o[...]

22 Teletext functi on HV-32/28P40BJ / LCT1687-001A-U / English 2 Press a colour butto n to choose a position. Then press the number buttons to enter the page number 3 Press and hold down the A (Store) button The four page numbers blink white to show that they are stored in memory.  To call up a stored page: 1 Press the B button to enter the List[...]

Teletext function 23 HV-32/28P40BJ / LCT1687-001A-U / English Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page numb er, or press a c olour button The TV searches for a[...]

24 HV-32/28P40BJ / LCT1687-001A-U / English Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understan d the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the H button to display the menu bar 2 Press the 5 buttons to [...]

25 HV-32/28P40BJ / LCT1687-001A-U / English PICTURE menu • While the PICTURE menu is d isplayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. • When watching the picture from EXT-1 to EXT-5, picture effe ct settings can be memorised for each external input by setting the pict ure[...]

26 PICTURE menu HV-32/28P40BJ / LCT1687-001A-U / English WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are char acteristic of films. FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.  DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or i[...]

PICTURE menu 27 HV-32/28P40BJ / LCT1687-001A-U / English MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for high- quality pictures which contain very little noise. MAX: The level of DigiPure effe[...]

28 PICTURE menu HV-32/28P40BJ / LCT1687-001A-U / English 3 Press the 6 buttons to choose the appropriate colour system. Then pres s the a button PAL: PAL system NTSC 3.58: NTSC 3.58 MHz syste m NTSC 4.43: NTSC 4.43 MHz syste m AUTO: This function detect s a colour system from the input signal. You can only use this when you are viewing a picture fr[...]

29 HV-32/28P40BJ / LCT1687-001A-U / English SOUND menu • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers. They do not work for the sound from the headphones. • When the headphones are connected and only one screen is displayed, only “HEADPHONE VOLUME” can be used. STEREO / I • II When you are v[...]

30 HV-32/28P40BJ / LCT1687-001A-U / English FEATURES menu SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER. Then press the a or 3 button A Sub-menu of the SLEEP TIMER function appears. 2 Press the 5 buttons to set the period of time. Then pre ss the a button You can set the period of time for[...]

FEATURES menu 31 HV-32/28P40BJ / LCT1687-001A-U / English CHILD LOCK When there is a TV channel you do not want your children to watch, you can use the CHILD LOCK function to lock out the TV channel. Even when a child cho oses a programme number (PR) for a locked TV channel the screen will change to blue and display n (CHILD LOCK) so the TV channel[...]

32 FEATURES menu HV-32/28P40BJ / LCT1687-001A-U / English If you have forgotten the ID number: Perform step 1 of “To set the CHILD LOCK function”. After confirming the ID number, press the b button to exit the menu. • Even if you reset the lock temporarily, it does not mean that the CHILD LOCK function set for the TV channel is cancelled. The[...]

33 HV-32/28P40BJ / LCT1687-001A-U / English SET UP menu AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial setti ngs” (page 6). To receive SKY 1 you need a satellite tuner. You must have the sate ll ite tuner set to SKY 1 before starting the AUTO PROGRAM function. 1[...]

34 SET UP menu HV-32/28P40BJ / LCT1687-001A-U / English • When a TV channel has already been registered in PR 99, using the INSERT function deletes that T V channel.  Basic operation 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears. 2 Follow the descrip tion for the function you want to use 3 Press the a button to compl[...]

SET UP menu 35 HV-32/28P40BJ / LCT1687-001A-U / English  ID 1 Press the 6 buttons to choose a TV channel 2 Press the red button to start the ID function 3 Press the 6 buttons to choose the first character of a channel name (ID) you want to give the TV channel 4 Press the blue button to display the ID LIST (channel name list) 5 Press the 6 button[...]

36 SET UP menu HV-32/28P40BJ / LCT1687-001A-U / English  INSERT 1 Press the 6 buttons to choose a programme number (PR) for which you will regis ter a new TV channe l 2 Press the gre en button and star t the INSERT function To cancel the INSERT function: Press the b button. 3 Press the number buttons to enter the remaining CH number • You cann[...]

SET UP menu 37 HV-32/28P40BJ / LCT1687-001A-U / English LANGUAGE The LANGUAGE setting which was performed in the “Initial settings” ( page 6) can be changed. 1 Choose LANGUAGE, then press the a or 3 button A sub-menu of the LANGUAGE function appears. 2 Press the 5 and 6 buttons to choose a langua ge. Then press the a button PICTURE TILT There a[...]

38 SET UP menu HV-32/28P40BJ / LCT1687-001A-U / English 6 Turn on the VCR, and then press the a button to transmit the data to VCR The T-V LINK menu disappears once the data transmission ends. If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following: • Has the decoder been connected to[...]

SET UP menu 39 HV-32/28P40BJ / LCT1687-001A-U / English EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETT ING menu appears. 2 Follow the instructions for the function you want to use and operate the function S-IN: You can enjoy the high-quality picture of the 2 S-VIDEO signal (Y/C signal). ID LIST: You can have a name for [...]

40 SET UP menu HV-32/28P40BJ / LCT1687-001A-U / English  ID LIST You can store a name fo r each of the devices connected to each EXT ter minal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name. 1 Press the 5 or 6 buttons to choose an EXT te rminal 2 Press the blue button to display the n[...]

SET UP menu 41 HV-32/28P40BJ / LCT1687-001A-U / English • During dubbing, you cannot turn of f the TV. Turning off the TV also turns off the output from the EXT-2 terminal. • When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the[...]

42 HV-32/28P40BJ / LCT1687-001A-U / English Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel co nnections. Before connectin g anything: • Read the manuals that cam e with the equipment. Depending on the equipment, the connection method may be differen t from the di[...]

Additional preparation 43 HV-32/28P40BJ / LCT1687-001A-U / English  Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-V HS VCR Connect the equipment to an EXT terminal. You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-I[...]

44 HV-32/28P40BJ / LCT1687-001A-U / English CH/CC numbers • When you want to use the INSERT function on page 36, find the CH/CC number corresponding to the channel number of the TV channel from this table. If you want to know a particular TV channel’s channel menu, look in TV listings magazine s or contact the broadcaster. • When the COUNTRY [...]

45 HV-32/28P40BJ / LCT1687-001A-U / English Troubleshooting If a problem arises while you are using the TV, pl ease read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is di sconnected from the mains outlet, or the TV aerial has problems, you [...]

46 Troubleshooti ng HV-32/28P40BJ / LCT1687-001A-U / English • Videotaping teletext is not recommended because it may not record correctly. • When a white and bri ght still image (such as a white dress) is displayed on the screen, the white part may look as if it is coloured. This is unavoidable due to the nature of the picture tube itself, and[...]

Troubleshooting 47 HV-32/28P40BJ / LCT1687-001A-U / English • It takes a short period of time from the time an operation such as changing channels is performe d until an image is displayed. This is not a fault. This is th e time needed fo r the image t o stabilize before it can be displayed. • The TV may make a crackling sound due to a sudden c[...]

48 HV-32/28P40BJ / LCT1687-001A-U / English Specifications We may change the design and specific ations without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public plac es (cafes, hotels, etc.) without the consent of the owners of copyright of the or igi[...]

© 2004 Victor Company of Japan, Limited HV-32/28P40BJ / LCT1687-001A-U / All Cover Cover04 LCT1687-00 1A-U 0804-T-CR-JMU K HV-32&28P40BJ_Eng.book Page 2 Thursday, July 2 9, 2004 9:25 AM[...]