JVC WB-1550 инструкция обслуживания

DEUTSCH FRANÇAIS ESP AÑOL IT ALIANO ENGLISH INSTR UCTIONS OUTDOOR HOUSING LST0267-001A WB-1540 WB-1550 Fo r Customer Use: Enter below the Serial No . which is located on the body . Retain this information for future ref erence. Model No . WB-1540/WB-1550 Serial No. This instruction book is made from 100% recycle paper.[...]

2 T hese are general IMPORT ANT SAFEGU ARDS and certain items may not apply to all appliances. IMPOR T ANT SAFEGU ARDS 1. Read all of these instructions. 2. S av e th ese instructions for later use. 3. All war nings on th e product and in the operating instr uctions should be adhered to. 4. Un plug this appliance syst em from the wall outlet before[...]

3 In fo rmation for Users on Disposal of Ol d Equipment [European Union] This symbol indicates th at the electrical an d electronic equ ipment should not be disp osed as genera l household waste a t its end -o f-life . Instead, the pr oduct should be handed ov er to the applicab le collection point f or the recycling of ele ctrical and electroni c [...]

4 Getting Star ted Thank you fo r purchasing this p roduct. (These instr uctions are for WB-1540U/ WB-1550U) Before beginning to operate this unit, please read the instruction manual careully in order to make sure that the best possible pe rf ormance is ob tained. Getting Started Table of Contents ................. ................. ...............[...]

5 System Example VN-C625 and VN-C655 Systems CAUTION: T 1: Not in use on this system. Ensure to bind both ends of cables that are not in use with insulating tape . T 2: P ower will not be supplied to this unit and the installed camera when the fuse on the main board bur ns out. When this occurs, please consult y our nearby JVC dealer as e xchange o[...]

6 Installation and Connection (WB-1540) 1. Dismantle the gasket and gaske t gland Loosen the 6 Screws B (M4) using a driver , follow ed by dismantling the gasket and gasket gland from the l ower housing. T The 6 Screws B (M4) cannot be totally remo ved from the gasket to pre vent it from f alling off. 2. Dismantle the lo wer housing Loosen the 3 Sc[...]

7 1. Dismantle the camera mounting brac ket Loosen the screws on the camera mounting brack et (M4, 4 pcs) using a driver to dismantle it. 2. Dismantle the con ver ter unit mounting bracket Loosen the screws on the conv er ter unit mounting bracket (M3, 2 pcs) using a driver to dismantle it. 3. Mount the con verter unit to the housing Clamp the conv[...]

8 Installation and Connection (WB-1 540) 1. Adhering the desiccan t Use a tape to adhere the supplied desiccant to the interior of the lower housing. 2. Mount the lo wer housing Mount the lower housing that is dismantled in Step 2. ( A pg. 10) to the main housing unit usin g the 3 Screws A (M4 x 6). Do so by aligning the position marks of the lower[...]

9 4. Open the cable conne ction cov er Use provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable connection cov er to open it. 5. Connect each cable Connect the necessar y cables . 6. Bind cable using a wat erpro of tape Upon connecting, ensure to perform waterproofing procedures by binding the joint of each cable with a wa ter pr[...]

10 Installation and Connection (WB-1550) 1. Dismantle the gasket and gaske t gland Loosen the 8 Screws B (M4) using a driver , follow ed by dismantling the gasket and gasket gland from the l ower housing. T The 8 Screws B (M4) cannot be totally remo ved from the gasket to pre vent it from f alling off. 2. Dismantle the lo wer housing Loosen the 3 S[...]

11 1. Connect the AC 24 V output cable to th e camera Connect the AC 24 V output cable to the ceiling mo unt of the camera to be installed. 2. Connect other cables Connect the coaxial video cable and communication cables (alarm signal, control ter minal, etc.) suppl ied with the housing to the ceiling mount. 3. Mount the ceiling mount of the c amer[...]

12 Installation and Connection (WB-1 550) 1. Dismantle the camera mounting brac ket Loosen the screws on the camera mounting brack et (M4, 4 pcs) using a driver to dismantle it. 2. Dismantle the con ver ter unit mounting bracket Loosen the screws on the conv er ter unit mounting bracket (M3, 2 pcs) using a driver to dismantle it. 3. Mount the con v[...]

13 1. Mount the de siccant Use a tape to adhere the supplied desiccant to the interior of the lower housing. 2. Mount the lo wer housing Mount the lower housing that is dismantled in Step 2. ( A pg. 10) to the main housing unit usi ng the 3 Screw A (M4 x 6). Do so by aligning the position marks of the lower housing and the main housin g unit. 3. Mo[...]

14 Installation and Connection (WB-1 550) 4. Open the cable conne ction cov er Use provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable connection cov er to open it. 5. Connect each cable Connect the necessar y cables . 6. Bind cable using a wat erpro of tape Upon connecting, ensure to perform waterproofing procedures by binding [...]

15 Others 䡵 General Po we r / V oltage : AC 24 V 50 Hz/60 Hz (Main Housing Unit) Po we r Consumption :2 5 W (During heater ope ration, e xcluding camera) Installation Location :O utdoor (general) Ambient T emperature : - 20 I to 50 I (when equipped with TK-C625U/E) : - 20 I to 40 I (when equipped with VN-C625U) H eater Operation T emperature (Int[...]

© 2005 Victor Company of Japan, Limited Printed in Japan LST0267-001A WB-1540/WB-1550 OUTDOOR HOUSING[...]