Kenmore 3950144 инструкция обслуживания

Owner's Manual and installation instructions Three-Speed AUTOMATIC WASHERS IMPORTANT: Read and follow all safety and operating instructions before first use of this product, Your washer may look different from the washer shown. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. PART NO. 3950144 Rev. A PRINTED IN U.S.A.[...]

BEFORE USING YOUR NEW WASHER SEARS AUTOMATIC WASHER WARRANTY iMPORTANT SAFETY iNSTRUCTiONS iNSTALLATION iNSTRUCTiONS OPERATING YOUR WASHER LAUNDRY TiPS CARING FOR YOUR WASHER TROUBLESHOOTING SEARS MAINTENANCE AGREEMENT 2 3 4 5 20 29 31 32 36 Please read this manual. It will help you install and operate your new Kenmore washer in the safest and most[...]

FULL I-YEAR WARRANTY ON MECHANICAL AND ELECTRICAL PARTS For one year from the date of purchase, when the washer is installed and operated in accordance with the instructions in the Owner's Manual, Sears will repair or replace any mechanical or electrical parts in this washer, if defective in material or workmanship. LiMiTED 5-YEAR WARRANTY ON [...]

YOUR SAFETY IS IMPORTANT TO US WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your washer, follow basic precautions, including the following: • Read all instructions before using the washer. • Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-clea[...]

INSTALLATION OVERVIEW For a complete list of tools and parts needed, see pages 6-8. A. SELECT LOCATION FOR YOUR WASHER (pgs. 10-12) Recessed Areal Closet Installation Instructions (p. 10) Standpipe Drain System (p. 12) 39" Laundry Tub Drain System (p. 11) Floor Drain System (p. 12)[...]

B. REMOVE SHIPPING STRAP (p. 13) Tools Needed: Scissors Flashlight (optional depending on installation) C. CONNECT DRAIN HOSE (pgs. i4-i5) __/TWl S T _,_Yl / AND _ _i PUSH Tools Needed: Parts Needed: Pliers that open to I9/_6 inches Flashlight (optional depending on installation) I yellow, single-wire hose clamp (top of drain hose) 1 silver, double[...]

D, CONNECT iNLET HOSES TO WASHER (pgs. 15-16) Tools Needed: Parts Needed: 1 Su Pliers that open to 19/[_ inches Flashlight (optional depending on installation) 2 water inlet hoses 4 flat water inlet hose washers E. CONNECT INLET HOSES TO WATER FAUCETS (p, 16) Tools Needed: Parts Needed: 9 Pliers that open to 1 /_6 inches (optional Flashlight (optio[...]

F. SECURE DRAIN HOSE (p. 17) Tools Needed: Parts Needed: Flashlight (optional depending on installation) Shipping strap with fastener G. LEVELWASHER (p, 18) Tools Needed: Parts Needed: U16-1nch open-end wrench Flashlight (optional depending on installation) Wood block 2 front leveling legs with nuts[...]

Selecting the proper location for your washer will improve its performance and minimize concerns like washer walk or noise. ELECTRICAL REQUIREMENTS 120-Volt, 60-Hz., AC-only, 15- or 20-ampere fused electrical supply is required. (Time-delay fuse or circuit breaker is recommended.) Connect to individual branch circuit. Electrical Shock Hazard Plug i[...]

A. SELECT LOCATION FOR YOUR WASHER - RECESSED AREAl CLOSET INSTALLATION INSTRUCTIONS This washer may be installed in a recessed area or closet. 48 sq. in. minimum ventilation area 24 sq. in. minimum ventilutiun al'ea Front View (Door With Vent) 3" f 3" *Additional clearance tot wall, door and tloor moldings may be required. To reduce[...]

LAUNDRY TUB DRAIN SYSTEM Check location where washer will be installed. This washer can be installed using one of three systems: • Laundry tub drain system (below) • Standpipe drain system (p. 12) • Floor drain system (p. 12) Do not store or operate washer at or below 32°F (some water may remain in washer). See page 31 for Winterizing Inform[...]

ALTERNATE LOCATIONS- STANDPIPE AND FLOOR DRAIN SYSTEMS Siphon break: Must be purchased separately. See chart below. Standpipe drain system: Needs a two-inch minimum diameter standpipe with minimum carry-away capacity of 17 gallons per minute. Top of standpipe must be at least 39 inches above floor and no higher than 96 inches from bottom of washer.[...]

B. REMOVE SHIPPING STRAP Removing the shipping strap is necessary for smooth operation, If the shipping strap is not removed, the washer will make excessive noise. To prevent floor damage, set washer onto cardboard before moving across floor. Move washer close to its final location. STEP 1. Read, then remove the label over the electrical plug and s[...]

C. CONNECT DRAIN HOSE Proper connection of the drain hose will protect your floors from damage due to water leakage. STEP 1. To prevent the drain hose from coming off or leaking, it must be installed per the following instructions: IMPORTANT: To ensure proper installa- tion, this procedure must be followed exactly. a. Wet the inside of the straight[...]

For standpipe or laundry tubdrain systems: STEP 2. Open yellow, single-wire clamp with pliers and slide over hooked end ofdrain hose tosecure the rubber and corrugated sections together. Hooked End D. CONNECT INLET HOSES TOWASHER Proper connection of your inlet hoses will allow hot and cold water to enter your washer properly, it also helps prevent[...]

STEP 2.Attach the hose with the red coupling to the hot water (bottom) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand. Make an additional two-thirds turn with pliers to tighten coupling. DO NOT OVERTIGHTEN; this could damage the valves. Cold Water inlet Valve Hot Water Inle[...]

F. SECURE DRAIN HOSE Securing the drain hose properly will protect your floors from damage due to water leakage. STEP 1. Move washer to its final location. -4 u STEP 2. Locate the remaining piece of sMpping strap (not the end with the three cotter pins) from STEP 4 of "REMOVE SHIPPING STRAP." Use it to wrap the drain hose together with th[...]

G. LEVEL WASHER Leveling your washer properly pre- vents excessive noise and vibration. To install front legs: STEP 1. Prop front of washer up (about 4 inches). Use a wood block or another object that will support the weight of the washer. If washer was placed against a wall, move the washer out slightly before tipping it up. STEP 2. With one of th[...]

REVIEW INSTALLATION Take a few minutes to complete this checklist, it will help assure you that you have a proper installation and increase your satisfaction with your Kenmore washer, [] Check electrical requirements. Be sure you have correct electrical supply and recommended grounding method. [] Check that you have: • All the tools you started w[...]

To get the maximum cleaning and fabric care from your washer, please read and follow these instructions. NOTE: The drawings in this section show the basic features of all models covered by this manual. Refer to the supplied "Feature Sheet" for your washer's particular features. Explosion Hazard Never place items in the washer that ar[...]

SET WATER LEVEL CONTROL This control gives you the flexibility to save water when washing small loads. Your washer lets you select a water setting based on the size of your wash load. • For normal loads, start with the MEDIUM LOAD Setting. Adjust up or down depending on your load. Clothes should move freely and roll toward the agitator. Washers w[...]

AUTOMATIC TEMPERATURE CONTROL (ATC) ATC takes away the worry of undissolved detergent and ensures consistent cleaning results from season to season with warm and cold washes. ATC electronically senses and maintains a uniform water temperature by regulating incoming hot and cold water. • Even in cold wash, some AUTO warm water is let into the TEMP[...]

SETTING YOUR CYCLE SELECTOR (TIMER) CONTROL Use this control to choose the agitation time and to start the washer. • For heavy soil and sturdy fabrics, use the full time. • For light soil and delicate fabrics, use less time. PERMANENT PRESS The PERMANENT PRESS Cycle includes a load cooling process that reduces wrinkling compared to other cycles[...]

SETTING YOUR RINSE OPTIONS CONTROL A second rinse will remove more detergent residue. It is especially beneficial if extra detergent has been used to remove heavy soils. AUTOMATIC SECOND RINSE Your washer allows you to add an auto- matic second rinse to the ULTRA CLEAN Cycle or PERMANENT PRESS Cycle. Simply set the RINSE OPTIONS Control on 2ND RINS[...]

SELF-CLEANING LINT FILTER Lint is filtered from the load automatically - there's no messy cleanup. Your washer features a self-cleaning filter that traps lint from the water while the washer is washing and deep rinsing the laundry. The trapped lint is flushed down the drain automatically. You don't have to clean the filter. F QUIET PAK TM[...]

UNDERSTANDING NORMAL WASHER SOUNDS Your new washer may make sounds that your old one didn't. Because the sounds are unfamiliar, you may be concerned about them. The following describes some of the normal sounds you may hear and what causes them. During Washing When you select a small load size set- ting for a small wash load, your washer has a[...]

USING THE LIQUID FABRIC SOFTENER DISPENSER After loading the washer, measure and add the recommended amount offabric softener into the dispenser. Follow manufacturer's directions. NOTE: Pouring too much fabric softener into the dispenser will cause the fabric softener to dispense instantly into the load due to siphoning action. This instant &q[...]

UNDERSTANDING WHAT HAPPENS IN EACH CYCLE ULTRA CLEAN Fill to selected level T Wash selected time T no spin T Spin T -I ......... Fill to selected level Rinse T Drain - no spin T Spin T Off or 2ND RINSE PERMANENT PRESS PREWASH Fill to _ Fill to selected level selected level T T D @ W sh selected time selected time T T I-! - Partial Drain - ........ [...]

PREPARING CLOTHES FORWASHING Follow these recommendations to help you prolong the life of your garments. • Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim and ornaments. • Empty pockets and turn them inside out. • Turn[...]

LOADING Proper loading of your washer con- tributes to proper cleaning and fabric care and reduces machine noise, • Drop items into washer loosely. Fill to the top of the basket (top row of holes). Do not wrap items around the agitator. Items should move easily through wash water for best cleaning and wrinkle-free results. Items should sink and r[...]

CLEANING YOUR WASHER Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Exterior Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep it looking like new. Do not put sharp or metal objects i[...]

Most laundering problems are easily and washer problems. If you need solved if you understand the cause, further assistance, see page 37. Check these lists forcommon laundry Problem Possible Cause Solution Washer Leaks Household ptumbing is leaking. Repair plumbing. Inlet hoses not tight. Tighten hoses (see "INSTALLATION," Sections D &[...]

Problem Possible Cause Solution Won't Drain/ Low vottage or using Check electrical source or call Won't Spin/ an extension cord. electrician. Do not use extension Wet Loads cords. (cont.) Cold rinses. Cotd rinses leave loads wetter than warm rinses. This is normal. Continues Drain hose is less than Raise the drain hose to Fill/ 39 inches [...]

Problem Possible Cause 8olution Machine Power cord not plugged in. Plug in power cord. Stops No power at plug. Check electrical source or call electrician. Fuse blown or circuit Replace fuse or reset circuit breaker. breaker open. If problem continues, call electrician. Using an extension cord. Do not use extension cords. Timer is not lined up. Tur[...]

Problem Possible Cause 8olution Tearing Overloading. Improper Loads should move freely during use of washer, wash. Wash smaller loads. improper use of chlorine Do not pour chlorine bleach directly bleach. Undiluted bleach on load. Wipe up bleach spills. will damage fabrics. Sharp items not removed Clean out pockets before washing. from pockets; fas[...]

KENMORE WASHERS We Service What We Sell "We Service What We Sell" isour assurance you can depend on Sears for service. Your washer has added value when you consider that Sears has service units nationwide, staffed with professional technicians specifically trained on Sears appliances and having parts, tools and equipment to ensure that we[...]

For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day, 7 days a week 1-[...]