Kenmore 625.385200 инструкция обслуживания

P/N 7332880 (Rev . E 11/7/12) Use & Care Guide Manual de Uso y C uidado English / Español Model / Modelo No . 625.385200 Kenmore Elite ® Hybrid Water Softener A water softener and a whole home filter in one Ablandador Híbrido de Agua Un ablandador de agua con filtro integrado para toda la casa Sears Brands Management Corporation 3333 Beverly[...]

2 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Warrant y W ARRANTY ON KENMORE ELITE ® HYBRID W A TER SOFTENER ONE YEAR LIMITED W ARRANTY ON HYBRID W A TER SOFTENER When installed, operated and maintained according to all instructions supplied with the product , if this Kenmore appliance fails due to a defec[...]

3 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Table of C ontents Safet y Guides European Directive 2002/96/EC requires all electrical and electronic equipment to be disposed of according to Waste Electrical and Electronic Equipment (WEEE) requirements. This directive or similar laws are in place nationally [...]

4 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Specifications & Performance Claims SPECIFICA TIONS Model No. 625.385200 Model Code 520 Rated Softening Capacity (Grains @ Salt Dose) 11,000 @ 2.6 lbs. 24,700 @ 7 .8 lbs. 31,100 @ 13.4 lbs. Rated Efficiency (Grains/P ound of Salt @ Minimum Salt Dose) 4,230 @[...]

5 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Specifications & Performance Claims 17" 21" 48" 41-1/2" IN - OUT 34" 3-3/4" IN OUT FRONT VIEW SIDE VIEW IN - OUT 41-1/2” 48” 34” 21” 17” 3-3/4” OUT IN FR ONT VIEW SIDE VIEW Figure 1 Dimensions PERFORMANCE CLAIMS Cont[...]

6 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Packing List Drain Hose Adaptor Elbow Installation Adaptors Hose Clamps Grommet The parts required to assemble and install the water softener are included with the unit . Thoroughly check the water softener for possible shipping damage and parts loss. Also inspe[...]

7 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Plan Y our Installation TYPICAL INST ALLA TION 5 . Do not install in a place where the softener could freeze. Damage caused by freezing voids the war- ranty by Sears Brands Management Corporation. 6. Put the softener in a place where water damage is least likely[...]

8 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Plan Y our Installation psi, buy and install a pressure reducing valve in the pipe supplying water to the softener’ s inlet . NOTE: If water pressure during the day is 100 psi or more , pressure during the night may go abo ve 125 psi. Installation For your wat[...]

9 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Installation INST ALL SINGLE B YP ASS V AL VE (cont .) Before installing the bypass valve and/or installation adaptors, make sure that the turbine and support are firmly in place inside the softener valve ’s outlet port . ASSEMBLE INLET AND OUTLET PLUMBING Mea[...]

10 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Installation CONNECT THE V AL VE DRAIN HOSE Take a length of 3/8” inside diameter drain tubing (supplied) and attach one end to the drain fitting (see Fig. 11). Use a tube clamp from the parts bag to hold it in place. Put the other end of the tubing over a fl[...]

11 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Installation MET AL W A TER PIPE GROUNDING IMPOR T ANT : This water softener has a non-metallic valve system. Installing it on metal plumbing will break electrical continuity , which may interrupt grounding for the home. Y ou must restore electrical conti- nuit[...]

12 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Installation Figure 14 3-V AL VE B YP ASS B ypass Valve Inlet Valve Outlet Valve FOR SER VICE Close bypass valve. Open inlet & outlet valves. FOR B YP ASS Open bypass valve. Close inlet & outlet valves. LEAK TEST T o check for leaks, complete the follow[...]

13 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Pr ogramming the Softener BLUE LIGHT When the Kenmore Elite ® Hybrid Water Softener is connected to electrical power , the blue light on the con- trol panel will be on or flashing, as follows: = Blue light flashing rapidly , with “PRESENT TIME” shown in th[...]

14 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com 1 . Press the r UP or s DOWN buttons to set the hardness of your water supply , in grains per gallon. The default is 25. NOTE: If your water supply contains iron , compensate for it by adding to the water hardness number . For example , assume your water is 20 [...]

15 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Adding Salt to the Storage Tank ADDING SAL T TO THE STORAGE T ANK Y ou must keep salt in the tank, but it is not necessary to fill it full. Especially in humid areas, it is best to fill the storage tank no more than half full, and to add salt more often. Salt ?[...]

16 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com What Y our Hybrid Water Softener Will Do The Kenmore Elite ® Hybrid Water Softener has been designed to include two different types of media, a high quality media that reduces tastes and odors and a high efficiency media to remove hardness minerals. This Hybri[...]

17 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com C ontr oller Features Figure 25 LEVEL SALT press for tonight hold for immediate Salt Set Level Figure 24 Salt Level Decal Salt Level Bars Brinewell 3. Press the SET SAL T LEVEL button as many times as necessary to make the salt level bars in the display (see Fi[...]

18 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com C ontr oller Features Figure 28 Figure 27 2. Press SELECT again to display one of the “Clean” screens shown below . CLEAN: This feature is beneficial on water supplies containing iron and/or high amounts of sediments (sand, silt , dirt , etc.). When set to [...]

19 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Figure 31 Figure 32 6. Press SELECT again to display the “Gallons or Liters” screen. GALL ON OR LITER READINGS: Water usage and flow rate displays are shown in gallons at the default setting. If you prefer liters, change this setting from “Gals” to “L[...]

20 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com C ontr oller Features Figure 36 Figure 37 Figure 38 Figure 39 T op Distributor Ultra Cleansing Screen Resin Tank A VERAGE DAIL Y GALL ONS OR LITERS Press the W A TER USE button a second time to display the average number of gallons (or liters) of soft water tha[...]

21 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Care of Y our Water Softener SAL T BRIDGE Sometimes, a hard crust or salt “bridge” forms in the brine tank. It is usually caused by high humidity or the wrong kind of salt . When the salt “bridges,” an empty space forms between the water and the salt . [...]

22 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Ser vice Information TROUBLESHOO TING If your water softener does not work properly , make the following easy checks. Often, you will find what is wrong yourself and you won ’t have to call and wait for service. If you do not find anything wrong while making [...]

23 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Figure 41 Figure 42 Ser vice Information 1. T o enter diagnostics, press the SELECT button and hold for three seconds. The display will change to show turbine count , valve cycle position, and position switch status (open or closed). MANU ALL Y INITIA TED ELECT[...]

24 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com MANU AL ADV ANCE REGENERA TION CHECK This check verifies proper operation of the valve motor , brine tank fill, brine draw , regeneration flow rates, and other controller functions. Always make the initial checks first , and perform the manually initiated elec-[...]

24 V AC Tr a nsformer Tu r bine Sensor OUT GND +5 Position Switch NO NC grn brn Va l ve Motor Back of Controller (PW A) AC INPUT POS. / TURBINE MOTOR Figure 46 WIRING SCHEMA TIC 25 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Ser vice Information[...]

26 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com W at e r S o f te n e r E x pl o d e d V ie w Kenmore Model No. 625.385200 1 Valve Assembly See Pages 28 & 29 for parts 2 3 4 5 6 7 25 Rating Decal Location 8 10 9 11 12 13 15 16 24 18 17 19 20 26 27 28 31 22 21 23 30 29 14[...]

27 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Softener Par ts List Key No. Part No. Description 1 7329803 T op Co ver 2 7330600 Salt Lid (includes Kenmore badge & instruction decal) 3 727 5907 Transformer , 24V , 10V A 4 7329942 Repl. Electronic Contr oller (PW A) 5 7330626 Faceplate (includes faceplat[...]

28 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Valve Assembly Exploded Vie w 50 51 53 52 54 55 56 58 57 59 60 69 61 62 67 68 63 64 65 7 4 7 5 70 71 72 77 78 73 Seal Wear Strip Cross-Section View 7 6 66 79 80 82 81 83 84 85 86 87 88 89 90 91 92 93 94 9 5 96[...]

29 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Valve Par ts List Key No. Part No. Description 50 7224087 Screw , #8-32 x 1” (2 req.) 51 7286039 Motor (incl. 2 ea. of Key No . 50) 52 7231393 Motor Plate 53 0900857 Scre w , #6-20 x 3/8” (2 req.) 54 7171250 Bearing 55 7283489 Cam & Gear – 7331169 Dra[...]

30 Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www .kenmorewater .com Notes[...]

FOR IOW A USE ONL Y All sales in Iowa require the following signature before consummation of sale. These signatures must be retained by seller/renter for 2 years minimum. Buyer/Renter __________________________________________________________ Date _________________ Seller ________________________________________________________________ Date _______[...]

For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement p arts, accessories and owner ’s manuals that you need to do-it-yourself. For Sears professional inst allation of home appliances and items like garage door ope[...]