Kenwood KDC-7090R инструкция обслуживания

KDC-V7090R KDC-7090R B64-1902-00 (EN) COMPACT DIGITAL AUDIO CD-RECEIVER INSTR UCTION MANU AL[...]

— 2 — English Contents Safety precautions ..........................3 Handling Compact discs .................6 General features Power ...............................................................8 Switching Modes .............................................8 Volume .............................................................9 Attenuator ..[...]

— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotive- grade cables or other cables with an area of 0.75mm 2[...]

— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the RESET button. The unit returns to factory settings when the RESET button is pressed. After you press the reset button, the Mask Key will be needed to restart the unit. If the unit still fails to ope[...]

— 5 — Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then w[...]

— 6 — English Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs • Do not touch the recorded side of the CD (i.e., the side[...]

— 7 — Do Not Load CD Accessories in Slot Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilisers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction. You may damage the surface of th[...]

Switching Modes: Each time you press the SRC button, the mode switches as follows: Switching Modes You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. Power ON/OFF: When you turn your vehicle’s ignition on, the unit’s power will also turn on, wi[...]

This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. Turning the volume up, or turning it all the way down deactivates the attenuator fun[...]

Shut down the audio system temporarily whenever an incoming call is received. The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SR[...]

• When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly. • Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damag[...]

Changing the Clock Display: Press the CLK button to switch the clock display on and off. The clock indicator lights whilst the clock is displayed. NOTE Clock display Reattaching the Faceplate: Hold the faceplate so that the control panel faces the front toward you and set the left side of the faceplate in the faceplate bracket. Do not set the right[...]

Adjust various parameters of sound quality. Hold down the AUD button for one second or more to enter the control mode. Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. Source tone memory Each source (CD, FM, AM, [...]

Adjust the treble level. Display and setting: "TRE"/"Treble" : - 8 – + 8 Treble Level Adjust the centre frequency of the treble. Display and setting: "TRE FRQ"/"TRE F" : 10.0 / 12.5 / 15.0 / 17.5 kHz Treble Centre Frequency Adjust the middle quality factor. Display and setting: "Middle Q" : 1.0 / [...]

T uner f eatur es Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "VOL Offset"/"V Offset" : - 8 – ± 0 Volume Offset Adjust the fader level. Display and setting: "Fader" : Rear 15 – Front 15 Fader Level Adju[...]

Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. Select the band/station that you want to have stored. Hold down the button (#1-6) that you want to use for the station, for two seconds or more. The button number blinks once in the display to indicate that the data has [...]

RDS f eatur es You can change the display used when listening to the radio. Switching the Display: Each time you press the DISP button, the display changes as follows: Displaying Frequencies during programme service name display: Hold down the DISP button for one second or more. The frequency for the RDS station will be displayed for five seconds i[...]

You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Turning TI function On/Off: Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on. When none is being received, the TI indicator will blink on and off.[...]

Please see the menu settings (page 35) about switching between manual scrolling and automatic scrolling. This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: Press the DISP button to display the Radio Text. Holding down [...]

24. Jazz Music (Jazz) 25. Country Music (Country) 26. National Music (Nation M) 27. Oldies Music (Oldies) 28. Folk Music (Folk M) 29. Documentary (Document) ( Speech .....1~9,16~23, 29, Music .....10~15, 24~28) • You can select the type of programme directly by pressing a preset button. The buttons are factory-set to the following type of program[...]

CD/Exter nal disc contr ol f eatur es Changing the display language to another language. Press the PTY button. "PTY" is displayed, and the Programme Type Selection (PTY) Mode entered. Enter the Changing Language Mode Press the DISP button to enter the changing language mode. Changing the Display Language Press the FM or AM button. Each ti[...]

Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows: Switching Display for Discs This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit). Playing Discs: Pre[...]

Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts[...]

Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : "Repeat ON" / "T-Repeat ON" is displayed and the track ▼ Track Repeat ON ▼ Disc Repeat ON (Function of disc changers) ▼ Repeat OFF Track / Disc Repeat Using the remo[...]

Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan: Press the SCAN button. "Scan ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to[...]

If the disc changers that were manufactured and sold after 1997 (except for KDC-C560) are connected, you can directly input letters using the number/letter entry buttons on the remote control. Example: Use the following table to enter the name "DANCE". Continue steps 3 and 4 until all the characters are chosen for the name. You can enter [...]

• Magazine random play is cancelled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. NOTE Play the tracks on all the discs in the disc changer in random order. Press the M.RDM button to switch the magazine random play function on and off. "M.Random ON" is displ[...]

This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: Press the DISP button to display the disc title or the track title. Holding down the DISP button for one second or more results in one scrolling display of the titles.[...]

You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. Enter the menu mode Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displa[...]

Adjust the time manually. This adjustment is available only when the automatic time adjustment is set to off. (page 31) Display and setting: Select the display "Clock Adjust" during the selecting function in the menu system. Hold down either the 4 or ¢ button for one second or more to enter the Manual time adjustment mode. 2 1 NOTE Manua[...]

This function allows you to turn off the lower part of the display if there is too much information in the display. Display and setting: "Graphic ON" : The display will turn on by using the whole part of the display. (Default setting) "Graphic OFF" : The display will turn on by using only the upper part of the display and the IN[...]

You can dim the display. The dimmer function is not available for units if the dimmer cable is not connected. Display and setting: "Dimmer ON" : The dimmer setting is on. (Default setting) "Dimmer OFF" : The dimmer setting is off. NOTE Dimmer This adjustment permits easy viewing of the display. Display and setting: "Contras[...]

With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Display and setting: "Local.S ON" : The local seek function is on. "Local.S OFF" : The local seek function is off. (Default setting) Local Seek Function <In Tuner mode> You can arrange to have news bulletins interrupt yo[...]

You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted. Display and setting: "Regional ON" : The Region Restrict Function is on. (Default setting) "Regional OFF" : The Region Restri[...]

Set the time for the OFF Timer function activated when you selected Standby mode. If the predefined time elapses, this unit's power is automatically turned off. Display and setting: "OFF – – – –" : Power OFF Timer function is cancelled. "OFF 20min" : Unit's power goes OFF after 20 minutes. (Default setting) &qu[...]

• VOL buttons Press the 5 button to turn the volume up. Press the ∞ button to turn the volume down. • SRC button Each time you press the SRC button, the mode switches as follows: Basic operations Do not set the remote control on hot places such as above the dashboard. Loading and Replacing the Batteries: Use one lithium battery (CR2025). Remo[...]

• 4 / ¢ buttons Press the 4 button to make decreasing seeks (using the preset tuning mode). Press the ¢ button to make increasing seeks (using the preset tuning mode). • AM/FM buttons Press the AM button to select the MW and LW bands. Press the FM button to select and switch between FM1, FM2, and FM3 bands. • DIRECT/OK button Enters and can[...]

• 4 / ¢ buttons Press the 4 button to search through the tracks backwards. Press the ¢ button to search through the tracks forwards. Used to move the cursor whilst entering disc name. • DISC buttons (for disc changers) Press the DISC – button to search through the discs backwards. Press the DISC + button to search through the discs forwards[...]

— 39 — — 39 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION .........1 1 .........1 3 .........1 4 Installation Procedure Accessories 1. To prevent short circuits, remove the key from the ignition and disconnect [...]

English — 40 — Connecting Cables to Terminals P.CONT ANT.CONT. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT TEL MUTE EXT.CONT. REAR Front left output (White) Front right output (Red) Rear right output (Red) Rear left output (White) Connector Function Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A–4 A–5 A–6[...]

— 41 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). NOTE Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Metal mounting strap (commercially available) Self-tapping screw (commercially available) Firewall or metal s[...]

English — 42 — Removing the hard rubber frame ■ Removing the Unit Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 4 Removal tool Screw (M4X8) (commercially available) Removing the Unit ■ Push upward the removal tool toward the top, and pull out the unit halfway[...]

— 43 — Refer to the section "Removing the faceplate (page 12)" and then reattaching the faceplate. Never insert the taptite screws (ø2 × 4 mm) in any other screw holes than the one specified. If you insert it in another hole, it will contract and may cause damage to the mechanical parts inside the unit. 2 CAUTION 3 Locking the facep[...]

English — 44 — What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM Nothing happens when the buttons are pressed. The computer chip in the unit is not func[...]

— 45 — Troubleshooting Guide A CD ejects as soon as it is loaded. The CD is upside-down. Load the CD with the labelled side up. The CD is quite dirty. Clean the CD, referring to the section on "Cleaning CDs" (see page 6). The sound skips on a CD. The CD is scratched or dirty. Clean the CD, referring to the section on "Cleaning CD[...]

English — 46 — CD/MD/External disc control mode SOLUTION POSSIBLE CAUSE PROBLEM The computer chip in the unit is not functioning normally. Press the reset button on the unit (see page 4). The disc control mode cannot be selected. No cable has been connected to the disc changer input terminal on the unit. Connect the cable to the disc changer in[...]

— 47 — Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Nothing has been recorded on the MD. Blank Disc No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] I[...]

English — 48 — FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................. 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) .............................. 1.6 µV/75 Ω Frequency response ( ± 3 dB) .................................30 Hz – 15 kHz Signa[...]