Kenwood KVT-920DVD инструкция обслуживания

© PRINTED IN JAPAN B64-1784-10 (E) (DT) KVT -920D VD INSTR UCTION MANU AL TELEVISION WITH D VD RECEIVER This player has been designed to play back the DVD software which has been encoded for specific region areas. It cannot play back the DVD software encoded for other region areas than the region areas for which it has been designed. DIGITAL VIDEO[...]

2 Contents Before Use ......................................................4 Monitor Control Function ....................................8 •Opening/ Closing the Monitor •Power Off •Switching the Monitor’s Picture •Selecting the TV/Video Screen Mode •Adjusting the Picture Quality/ Slide Position •Turning the Monitor Picture Off •Sw[...]

3 •Selecting the Time Display for Disc CD Control Screen ....................................................37 •Pausing and Restarting Disc Play •Track Search •Fast Forwarding and Reversing Disc Play •Stopping playback •Track Repeat Function •Track Scan Function •Track Random Play Function •To Scroll Manually •Selecting the Tim[...]

4 Before Use The marking of products using lasers (Except for some areas) The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. To prevent inju[...]

5 Cleaning the disc slot As dust can accumulate in the disc slot, clean it occasionally. Your discs can get scratched if you put them in a dusty disc slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, discs may be impossible to play[...]

6 Before Use Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 2 4 1 5 4 5 2 1 2 6 3 This player has been designed to play back the DVD software which has been encoded for specific region areas. It cannot play back the DVD software encoded for other re[...]

7 DVD: Digital Versatile Disc A type of disc which contains recording of audio/video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VIDEO CD (VCD) A type of CD which contains the recording of moving images. It compresses image information by about 1/120[...]

8 Opening/ Closing the Monitor Opening the Monitor Set the vehicle’s parking brake. Press the OPEN button. The monitor will open. Once the monitor is fully out, lift it by hand and set it to an easily visible angle. Closing the Monitor Set the lower the monitor so that it is completely flat. The monitor is then drawn in automatically after one se[...]

9 E B Turning the Auto Dimmer Function On/Off Touch [ Auto Dimmer ] to switch the function on and off. " ON " Backlight brightness is automatically adjusted according the surrounding brightness as detected by the auto dimmer sensor of the monitor unit. " OFF " Backlight brightness is adjusted using the picture quality adjustment[...]

10 Source Icon change When there are more than 7 sources Items, [ ] is displayed. The selectable source icons are switched in order to touch [ ]. Switching to the Setup Screen Touch [ SET UP ] to switch the setup menu screen. <see p.11> Cancelling the Menu Screen Touch [ ] to switch to the source control screen for the current source. When us[...]

11 A A Switching the Setup Page Touch [ ∞ ] to switch to the next page. Touch [ 5 ] to switch to the previous page. If there is only one setup page it is not displayed. Cancelling the Setup Screen Touch this icon to return to the menu screen. NOTE Selecting to the RDS Tuner Setup Screen Touch [ RDS ] to switch the RDS Tuner Setup Screen. <see [...]

A 12 A F H Selecting the Dual Zone Speaker <When the 5.1 ch DSP unit is connected> You can select whether to output AV-OUT sound from the rear or from the front. Each time you touch [ 2zone SP ], the mode switches as follows: " Normal " AV-OUT sound send to the rear front speaker. " Reverse " AV-OUT sound send to the front[...]

13 Selecting the Point Marker Type Each time you touch [ Marker ], the mode switches as follows: " Type 1 " " Type 2 " " OFF " No display the pointer marker. Adjusting the Navigation Sound Level If the guide etc., sound from the navigation system interrupts, the sound level can be adjust. Touch [ 3 ] to increase the le[...]

A 14 A RDS Setup Function Changing the Function Setting: Touch [ 2 ] or [ 3 ] repeatedly until the desired setting is displayed. Touch [ 3 ] to increase the interval, and the [ 2 ] to decrease it. OFF ↔ 00min ↔ 10min ↔ 20min ↔ 30min ↔ 40min ↔ 50min ↔ 60min ↔ 70min ↔ 80min ↔ 90min (min= minutes) When you select the news interrupt[...]

15 C Changing the PTY Display Language to Dutch, French, German, Norwegian, Portuguese, Spanish and Swedish Each time you touch [ Language ] to change the language. Auto TP Seek Function On/Off When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information statio[...]

A 16 DVD/VCD Setup Function disc. If the initially set language does not exist in the disc, the priority language defined for each disc is used. Setting the Angle Mark Display With DVDs on which images photographed from multiple angles are recorded, the angle can be switched during playback. Each time you touch [ Angle Mark ], the mode switches as [...]

17 PBC(Playback Control) Function On/Off for VCD version 2.0 Each time you touch [ PBC ], the mode switches as follows: " ON " PBC function is turned on " OFF " PBC function is turned off Setting the Optical Output Mode Converts linear PCM (LPCM) voice signals recorded on the DVD disc to down sampling 48 kHz digital signals and [...]

A 18 DVD/VCD Setup Function Inputing the Language Code Touch [ a ] - [ b ] and input the language code. If you enter the wrong letter, touch [ Clear ].The last entered letter is cleared. Returning to the Original Language <Audio language only> Touch [ Original ] or to return to the original language. Returning to the DVD setup Screen Touch [ [...]

19 aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha hi hr hu hy ia ie ik in is it Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutan[...]

A 20 DVD/VCD Setup Function Setting the password Touch the number [ z ] - [ / ] and enter your password ( 4-digit ). Input numbers are displayed “*”. If you enter the wrong number, touch [CLEAR]. The entered number is cleared. Touch [ Enter ]. • Registered number can be used as a password. • Pressing the Reset button erases the password. Se[...]

21 Setting the Minutes to "00" Touch [ RESET ] to set the minutes to "00". Touch [ RESET ] whilst the minute is below "30" rounds it off, and whilst the minute is "30" or more rounds it up. NOTE Turning the Automatic Time Adjustment On/Off With automatic time adjustment, you can set the clock time automatical[...]

22 T ouch Panel Adjustment Function Select the area for TV broadcast viewing. Selecting the Preset Bands Touch [ TV 1 ] or [ TV 2 ]. The preset band switches between TV1 and TV2. Selecting the Reception Area Touch [ G1 ] - [ G6 ] to select the channel setting for your country as follows. The reception area can be set for two separate preset bands, [...]

23 If you press the RESET button or remove the battery: The first time you turn the unit on again, “The system in now waiting for your MASK KEY signal. Please input now.” will appear in the display, indicating the setting mode has been entered. Repeat steps 1 and 2 above, and transmit the signal. You can start operating the unit again when &quo[...]

24 A Operating the Buttons for Basic Function D chapters/tracks forwards. Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play Hold down on the 4 button. Release your finger to play the disc at the point. Ejecting Discs Press the EJECT b[...]

25 A Basic Operation for Source Control Scr een screen operation. Switching to the Graphic Screen The necessary minimum limit screen. The screen display pattern (graphic pattern) can be switched on this screen. Touch centre source icon to switch to the graphic screen. Refer to page 42 for the graphic screen operation. NOTE The common controls are e[...]

26 TV Control Function on the TV pictures Displaying the TV Picture Press the V.SEL button.(see page 8) Selecting the Preset Bands Each time you touch the upper centre part, the preset band switches between the TV1 and TV2. Selecting the Channels Auto Seek Mode (AUTO1) • Touch the right side part to seek for channels up the band. • Touch the le[...]

27 TV Control Function Station Preset Memory Store the channel of the station currently being look to. You can then recall that station with a single touch of a button. Select the band/ station that you want to store. Hold down preset station number [ P1 ] - [ P6 ] on which you want to store the station, for two seconds or more. You can store 6 sta[...]

28 TV Control Function H Switching to the Name Set Screen Touch [ ] for at least two seconds to switch to the name set screen.(see P.42) You cannot operate unless the parking brake is set. Switching the List Each time you touch [ ] or [ ] , the list switches between the TV1 and TV2 bands. Recalling a Preset Station Touch the preset station number [[...]

29 Station Preset Memory Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. Select the band/station that you want to have stored. Hold down preset station number [ 1 ] - [ 6 ] that you want to use for the station, for two seconds or more. You can store 6 stations in each[...]

30 FM/AM T uner Contr ol Function Switching to the FM/AM List Screen Touch [ LIST ] to switch to the FM/AM list screen. Switching the List Each time you touch [ ] or [ ] , the list switches between the FM1, FM2, FM3 and AM bands. Recalling a Preset Station Touch the preset station number [ 1 ] - [ 6 ] for the desired station. The number of the reca[...]

31 function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner. • You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum. Traffic Information Function You can listen to traffic information. If you are listening to discs, they[...]

B 32 FM/AM T uner Contr ol Function Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. You cannot use this function whilst the traffic information function is turned on. Searching the Selected Programme Type Touch [ SEARCH ] to make a seek of frequencies with your selected type of progra[...]

33[...]

34 C Selecting the item Touch [ % ],[ fi ],[ @ ],[ # ]. Setting the item Touch [ ENT ]. Returning to the menu Touch [ RTN ]. • The display, operation method and usable keys of the menu screen are variable depending on software. For details, read the instructions provided with the played software. • When the menu has a hierarchical structure, t[...]

35 Viewing Zoom 1/4 of the image can be zoomed and viewed. Touch [ ZOOM ] to display the zoom control screen. Zooming the image Each time the [ zoom ] is touched the image switches between zoom ( ON ) and normal ( OFF ). Scrolling the image When you touch [ @ ], [ # ], [ % ] or [ fi ], the image scrolls in the direction of the touched arrow. If yo[...]

36 DVD/VCD/CD Control Function to 1/2 times( x 2) to 1/3 times( x 3). • Reverse slow playback is not available with a VCD. Pausing and Restarting Disc Play Touch [ 38 ] to make the disc pause. Touch [ 38 ] again to start play again. The following operation may not be available with certain discs. Frame-by-frame playback Touch [ 38 ] during pause.[...]

37 Track Scan Function Successively play the beginning of each track on a disc until you find the one that you want to listen to. Turning Track Scan Function On/Off Touch [ SCN ] to switch the track scan function on and off. The SCN indicator is displayed when the track scan function is turned on. The first 10 seconds of each track are played, and [...]

38 DVD/VCD/CD Control Function G Selecting the Name or Title Display for Discs Each time you touch [ D ], the display during disc play switches as follows: ▼ Disc name ▼ Disc title/text ▼ Track title/text • You can give names to discs through the presetting disc name function. • If you try to display the name of a disc that does not have [...]

F A 39 External Disc Control Function Track Scan Function Successively play the beginning of each track on a disc until you find the one that you want to listen to. Turning Track Scan Function On/Off Touch [ SCN ] to switch the track scan function on and off. The SCN indicator is displayed when the track scan function is turned on. The first 10 sec[...]

40 External Disc control Function L To change the track being heard, touch [ ¢ ]. Another disc/track is selected and played. • Random play is cancelled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. •The 3+1MD changer cannot be operated when 4 disks are inserted. Se[...]

41 Switching to the Name Set Screen (Function of CD player/ CD changers) Touch [ ] for at least two seconds to switch to the name set screen.(see P.42) You cannot operate unless the parking brake is set. Switching to the Disc List Screen Touch [ LIST ] to switch the disc list screen. Changing the Disc List Each time you touch [ ] or [ ] , the disc [...]

A A A B B C D E F G H Graphic Screen B D C E F H G 42 Name Set Function When you drag in the direction of A Increase the volume. When you drag in the direction of B Decrease the volume. When you drag in the direction of D • In TV,FM/AM tuner mode Seek up. • In Disc mode Chapter/Scene/Track search up. When you drag in the direction of C • In T[...]

43 Sound Effect Menu Function Switching to the Audio Control Screen Touch [ Audio ] to switch to the Audio Control Screen (Page 44). Switching to the Crossover Network Setting Screen Touch [ X'OVER ] to switch to Crossover Network Setting Screen (Page 46). Switching to the Crossover Setting Screen <When the KDS-P900 is connected> Touch [[...]

44 Audio Control Function A Adjusting the Fader Levels • Each time you touch [ ](F), the sound in the front channel emphasised. • Each time you touch [ ](R), the sound in the rear channel emphasised. Turning the Loudness On/Off This function amplifies low and high tones when the volume is turned down. The LOUD indicator is displayed on the sour[...]

45 Setting the Speaker Type Using this function to set the diameter of the speaker optimizes the sound quality to the speaker diameter. Each time you touch [ SP ] to select the speaker type as follows: " STANDARD " Speaker with a general diameter " NARROW " Speaker with small diameter " WIDE " Woofer with a large diame[...]

46 Audio Control Function A Adjusting the High-pass filter for Rear output Adjust the frequency of the High-pass filter Each time you touch [ ] or [ ] to adjust the frequency as follows: THR (through) / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz Adjusting the High-pass filter for Front output Adjust the frequency of the High-pass fi[...]

47 5.1 Channels Surround Pr ocessor Control Function F I E H G D B A C Digital Effect Setting Screen Selecting the Dynamic Range Select the dynamic range for Dolby Digital sound. Each time you touch [ D-Range ], the dynamic range switches as follows: " Standard " For more powerful sound at regular volumes. " OFF " For regular so[...]

Selecting the Position Mode Touch [ ALL ],[ Front R ], [ Front L ], [ Front ] or [ Rear ], the listening position will be switched as follows: " ALL " Centre of the passenger cabin " Front R " Centred on the front right seat " Front L " Centred on the front left seat " Front " Centred on the front seat "[...]

49 •You cannot operate when the “Center SP“ is set to "OFF" ( see P 47 ) <When playing with multi-channels>. •You cannot operate when the “Multi channel“ is set to “2/2“ or “2/0“ ( see P 47 ). Returning to the Sound Effect Menu Screen Touch [ RTN ] to return to the sound effect menu screen. Setting the Channel Ba[...]

50 5.1 Channels Surround Pr ocessor Control Function H F A B D C E G Adjust the slope Each time you touch [ ] or [ ] to adjust the slope (12dB, 18dB and 24dB). Setting the phase for Sub Woofer output Each time you touch [ Sub Phase ] to switch the phase as follows: " NORMAL " 0° " REVERSE " 180° Storing Your Settings of the Cr[...]

51 E Adjusting the Sub Woofer Touch the [ ] or [ ] to adjust the delay time for non-fading output. You cannot operate when the “Sub Woofer“ is set to "OFF" ( see P 47 ). Ending to the Delay Time Setting Screen Touch [ RTN ] to return to the crossover network screen. NOTE The ideal listening position for 5.1-channel surround playback i[...]

52 5.1 Channels Surround Pr ocessor Control Function A Recalling the Kenwood Preset Sound Each time you touch [ 2 ] or [ 3 ] , the preset sound setting switches between the “FLAT“, “POPS“(TOP40), “ROCK“, “DANCE“, “VOCAL“ and “CLASSIC“. Storing Your Sound Settings Touch a [ 1 ] - [ 3 ] that you want to use for the equaliser c[...]

53 Quick Effect Function Returning to the Source Control Screen Touch [ RTN ] to return to the Source Control Screen. Adjusting the Balance Levels • Each time you touch [ ], the sound in the left channel is emphasised. • Each time you touch [ ], the sound in the right channel is emphasised. Adjusting the Fader Levels • Each time you touch [ ][...]

54 Remote Control Function 3 Switching the audio source mode <TV/AUD position> Each time you press the [ SRC ] button to switch the audio source mode. 3 Volume <TV/DVD/AUD position> Each time you press the VOL button to 5 side to increase the volume. Each time you press the VOL button to ∞ side to decrease the volume. 3 Turning Attenu[...]

55 3 Pausing and Restarting Disc Play • Press the Joystick to make the disc pause. • Press the Joystick to start play again. 3 Manual Search Forward search Move the Joystick to front side. Reverse search Move the Joystick to back side. (DVD/VCD) Each time you move the Joystick, the search speed goes from 1 times(x1) to 2 times(x2) to 3 times(x3[...]

56 Installation Accessories External view ......... Number of items ........1 B ........1 C External view ......... Number of items External view ......... Number of items C A R D IV E R S ITY A N T E N N A W IT H B O O S T E R C X - A 3 3 0 ON O FF BO OST C A R D I V E R S I TY A N T E N N A W IT H B O O S T E R C X - A 3 3 0 ON O FF BO OST ......[...]

57 Installation for Monitor Unit • Move the fittings on both sides to suit the installation chassis and select the embedding position from among the 3 positions.( :Fixing screw) • When the fittings are set closest to the front (i.e., the embedding position is farthest back), use the hard rubber frame (Accessory I ). NOTE Accessory I Accessory H[...]

58 Installation Removing Monitor Unit Removing the Hard Rubber Frame ■ Catch Lock Accessory J Catch facing up Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. When the lower level is removed, remove the upper two locations. The frame can be removed f[...]

59 Installing the Antenna Units • Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation location as the tape can only be stuck on once. • If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger. A cold window glas[...]

FM /AM ANTENNA AV INPUT AV INPUT L L 1 2 VIDEO VIDEO AV OUTPUT TO MONITOR UNIT L R L R VIDEO M 4 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 ( 5A ) + A C C BATT BATT ACC ACC ILLUMI ILLUMI BAT ACC 60 Installation Connection If you connect the ignition cable (red) and the battery cable (yellow) to the car chassis (ground), you may cause a short circuit, that in [...]

TO NA V .I/F TO ANTENNA TO 5L I/F TO MZ-BUS TO MONITOR R R FRONT REAR PREOUT NON-FAD POWER LLL RRR CAR DIVERSITY ANTENNA WITH BOOSTER CX-A330 ON OFF BOOST CAR DIVERSITY ANTENNA WITH BOOSTER CX-A330 ON OFF BOOST A ( 1A ) ( 1A ) (3A) (10A) P.CONT OUT ANT CONT EXT.CONT TEL MUTE C C TT C DIGIT AL IN TV/DVD TO MZ-BUS 30R 61 (Accessory A ) Ground cable ([...]

62 Installation Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3 , make the connectio[...]

TO NA V .I/F TO ANTENNA TO 5L I/F TO MZ-BUS TO MONITOR ] "N" O - N 63 Connection for AV Equipments Only connect black cable to TO 5L interface. Connection of light-brown connecting cable (for NAV interface use) can result in failure. 2 WARNING FM /AM ANTENNA AV INPUT AV INPUT L R L R 1 2 VIDEO VIDEO FRONT REAR PREOUT NON-FAD AV OUTPUT POW[...]

64 Installation When two CD/MD changers are interconnected The disk changers are distinguished by source select disk-changer 1 and disk-changer 2. If the relevant connected device has a PROTOCOL SWITCH or O-N SWITCH, be sure to set the switch to “N”. NOTE ■ ] "N" ] "N" TO MZ-BUS TO 5L I/F TO MZ-BUS TO 5L I/F O - N TO MZ-BU[...]

65 T r oubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Nothing happens when the buttons are pressed. The computer chip in the unit is not functioning normal[...]

66 T r oubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM The sound/picture skips on a DVD/VCD/CD. The disc is scratched or dirty. Clean the disc, referring to the section on "Cleaning discs" (see p. 5). A track will not play. Random play has been selected. Turn off random play. A VCD cannot be played using menus. The subtitle is not dis[...]

67 External disc control mode SOLUTION POSSIBLE CAUSE PROBLEM The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the win[...]

Specifications Specifications subject to change without notice. Monitor Section Picture size............................................6.5 inches wide 142.6(W) ´ 80.7(H) mm Display system ....................Transparent TN LCD panel Drive system ..........................TFT active matrix system Number of pixels 336.960 pixels (480 H ´ 234 V ´ [...]