Kodak A-61602 инструкция обслуживания

ScanMate i1120 Scanner User’s Guid e Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A. © Kodak, 2007. All rights reserved. TM: Kodak, ScanMate A-6160 2 Part No. 9E8497 COLORS 8.5 x 11” Folded GUIDE COVER-KODAK SCANNERS FO NTS Whitney K Family S IZ E ECO P/N DESIGNER MODIFIED 11.16.07 9E8497A DE MEYER ARTWORK NAME PRINTING INFOR[...]

A-61602 January 20 08 i Content s 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

ii A-61602 January 2008 4 Image Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 S t arting the Scan V alidation T ool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36[...]

A-61602 January 2008 1 1 Introduction The Kodak ScanMate i1 120 Scanner is a desktop color scanner that scans two sides of a document in a single pass at 20 pages per minute. The ScanMate i1 120 Scanner can accommodate 50 document s in the feeder for scanning. Smart touch functionalit y is included which allows you to send document s to variety of [...]

2 A-61602 January 2008 Safety information MSDS Material Safety Data Sheet s (MSDS) for chemical product s are available on the Kodak website at: www .kodak.com/go/msds. When accessing the MSDSs from the websit e, you will be required to provide the catalog number o f the consumable you want the Material Safety Data Sheet for . See the section entit[...]

A-61602 January 2008 3 Any changes or modifications not expressly approved by the party responsible for compliance could void the use r ’s authority to operate the equipment. Where shielded int erface cables have been provided with the product or specified a dditional components or a ccessories elsewhere defined to be used with the inst allation [...]

4 A-61602 January 2008 2 Getting S t arted What’ s in the box Before you begin open the box an d check the contents: • Kodak ScanMate i1 120 Scanner • Input tray • Output tray • Pre-separation p ad • USB 2.0 cable • Power supply • AC power cord bundles • Welcome F olio which includes: - Bundled inst allation and application CDs - [...]

A-61602 January 2008 5 Inst alling the scanner Install the scanne r in the following order: 1. Install the Kodak Driver Sof tware. 2. Assemble the scanner . 3. V erify that you have a USB port. 4. Connect the power cord to the scanner . 5. Connect the USB cable between your scanner and PC. 6. T urn on scanner power and finalize the Kodak Driver So [...]

6 A-61602 January 2008 Inst alling the Kodak Driver Sof tware Install the driver sof tware before connecting the scanner t o your PC. 1. Insert the Kodak ScanMate i1 120 Scanner Installation CD in the CD-ROM drive. The installation program start s automatically . NOTE: If the CD does not start automatically , open the My Computer icon on your deskt[...]

A-61602 January 2008 7 The Welcome window will be displayed. 5. Click Next . The Software License Agreement window will be displayed. 6. After reading t he agreement, click I Agree . NOTE: Y ou may be prompted to enter you r Name and Comp any . If so, enter the information on the displayed screen and click Next .[...]

8 A-61602 January 2008 The following screen may be displayed. 7. Click Continue Anyway , The inst allation will begin. 8. When the installation is co mplete, the following window will be displayed. 9. Click Finish .[...]

A-61602 January 2008 9 Assembling the scanner The input tray snap s into place. Att aching the input tray 1. Attach the two input t ray pieces by aligning the slot s and snapping them together . 2. Open the scanner cover . 3. Locate and align the four tabs on the input tray with the slot s on the scanner . 4. When tabs and slots are in place, roll [...]

10 A-61602 January 2008 Att aching the output tray 1. Locate the output tray slot s on the scanner . 2. Align the output tray pins with the slots and lower the output tray into place. NOTE: The output tray can be folded up when no t in use for easy storage.[...]

A-61602 January 2008 11 V erifying for a USB port After you inst all the Kodak Driver Software, check for the presence of a USB port. • Select USB T est. The USB verification tool will check your operating system and hardware cap ability to determine if you ne ed to install the USB card. • If a functioning USB 2.0 port is present, the following[...]

12 A-61602 January 2008 Connecting the power cord to the scanner When the drivers ha ve been inst al led, connect the power supply and power cord to the scanner . Make sure that the power outlet is located within 1.52 metres (5 feet) o f the scanner and is easily accessible. 1. Select the appropriate AC power cord for your region from the supply of[...]

A-61602 January 2008 13 Connecting the USB cable IMPORT ANT : If you have not installed the Kodak Driver Software, do that now before proceedin g. The following instructions explain the connection of the USB cable between your scanner and PC. Y ou need to identify the USB port on your PC. If you installed the USB 2.0 card, use that port, otherwise [...]

14 A-61602 January 2008 T urning on the scanner and finalizing Kodak Driver Sof tware inst allation When the USB cable and power connections have b een made, and the Kodak Software Drivers have been properly inst alled, the installa tion will be complete when the scanner is tu rned on. 1. Use the power switch on the back of the scanner to turn the [...]

A-61602 January 2008 15 The Hardware Update Wizard screen will b e displayed. 4. Click Finish . When the inst allation process is complete and ready to scan, the LED indicator will stop flashing and stay green and the number 1 will be displayed in the function window . NOTES: • If the scanner does not p ass the self test, refer to Chapter 6, T ro[...]

16 A-61602 January 2008 During the final inst allation process, this screen may be disp layed: 5. If the above screen is displayed, select Ye s . The installation of the Kodak device driver for the scanner is complete. T o test the scanner , refer to the section entitled, “V erifying your scanner installation ” in Chapter 3. If the driver insta[...]

A-61602 January 2008 17 Scanner components Front view Input tray — holds up to 50 documents in place. Adjust s to fit the document size. Function window — displays 1 throu gh 9. These numbers correspond to 9 predefined scanning function s. See the section entitled, “Smart touch functionality” in Chapter 3 for more information. The function [...]

18 A-61602 January 2008 Inside view Calibration guides — for optimum image quality , keep the calibration guides clean. Pre-sep aration p ad — provides smooth docu ment feeding and separation of variou s sizes, thicknesses and textures of document s. Rollers — provides smooth document fe eding of various sizes, thicknesses and textures of doc[...]

A-61602 January 2008 19 3 Using the Scanner T urning the scanner on and off • Press the button on the back of the scanner to turn the scanner on (I) or off (O). After you turn on the scanner , wait for it to complete the self-test. When completed, the green indicator light will remain on a nd constant. Adjusting the input and output trays The inp[...]

20 A-61602 January 2008 S t art and stop scanning Before you st art scanning, make sure the scanner is on and ready for operation, which is indicated by the g reen indicator light being on and constant. Scanning is controlled by sof tware developed for your app lication. T o start and stop scanning, refer to the document ation provided with your ap[...]

A-61602 January 2008 21 V erifying yo ur scanner inst allation Kodak provides a test application called the Ko dak Scan V alidation T ool . This section describes how to use this tool to pe rform a basic scan function which includes feeding p aper and viewing captured images on your PC. The following steps help you to verify that your scanner inst [...]

22 A-61602 January 2008 The main Kodak Scanner window will be displayed. 5. Select the Default Setting Sh ortcut. 6. Click OK . This reset s the sof tware to the factory-in stalled default settings. The factory default settings are set to capture black and white images. The Scan V alidation T ool dialog box will be displayed. 7. Place some test doc[...]

A-61602 January 2008 23 The documents will be scanned and displayed in the Sca n V alidation T ool dialog box. NOTE: If the scanner is in powe r saver mode, a message will be displayed that the lamps need suf ficient time to warm up. Scanning will proceed when the lamp s are ready . After the images have been displa yed, your scanner inst allation [...]

24 A-61602 January 2008 Smart touch functionality Smart touch functionality allows you to quickly and easily perform common scanning tasks. Nine d ifferent fun ctions can be assigned and performed. Y ou can perform any of the functions by pressing the S tart button on the scanner or by selecting the function from the smart touch function listing. P[...]

A-61602 January 2008 25 Remove Icon — displays the Remove Icon dialog box. When you click Ye s , you will close smart touch and remove the smart touch icon from the system tray . If the checkbo x is selected when you exit, smart touch will rest art automatically and appear in the system tray the next time a user logs in. If the ch eckbox is unche[...]

26 A-61602 January 2008 Scan T o settings Destination — allows you to select one of the following options: • File: creates an electron ic file from the scanned docume nts and saves it in the location specified in the Folder path. • Application : creates an electronic file from the scanned document s and launches the application program for th[...]

A-61602 January 2008 27 File T ype — select one of these options based on how you want to save or send the scanned image(s). A vailable formats are: • PDF : Adobe PDF files (Port able Document Files) lo ok exactly like original document s and preserve the font s, images, graphics and layout of the source files regardless of the app lication and[...]

28 A-61602 January 2008 Scan As settings Settings Shortcut — displays the name of a group o f scanner settings currently defined for use by the Kodak Scanner . This named group of scanner settings is called a shortcu t and is described in more det ail in Chapter 4. Display settings prior to scanning: if selected, the Kodak Scanner window will be [...]

A-61602 January 2008 29 Configuring function numbers 1. Click the smart touch icon on th e system tray to display the smart touch function listing and select Co nfigure . The Configuration dialog box will be displayed. 2. Select the T ask shortcut you want to configur e from the Ta s k Shortcut drop-down list. 3. If you want to rename the T ask Sho[...]

30 A-61602 January 2008 6. By default your document s w ill be stored within your “My Documents” folder . If you want to change it, enter the folder name or click Browse to select a different folder . 7. If desired, add a file name prefix by e ntering the text in the File name prefix field. 8. If you want to provide your own file name for the f[...]

A-61602 January 2008 31 Third p arty applications If installed, t he PaperPort, Omni Page, and BizCard applications provided with the scanne r can be selected as a destin ation for scanned documents. This a llows easy access to the applications via a button press on the sca nner . T o configure a task sh ortcut to one of the application p rograms, [...]

32 A-61602 January 2008 4. Select Save As and provide a new na me for the shortcut, i.e, Business Cards. 5. Select Save and OK to return to the Configuration dialog box. 6. Select Apply in the Configuration dialog box. Y our complete t ask shortcut settings may look as follows:[...]

A-61602 January 2008 33 Smart touch Edit window The smart touch Edit window allows you to view the scanned images before sending them to the final de stination. As document s are scanned, the images will be disp layed in th e Edit window. From this window you can perform commo n editing tasks such as, rotating and dele ting blank pages, etc. When f[...]

34 A-61602 January 2008 These icons are available on the Edit window . T o use a tool, click on the icon to select the tool, then apply it to th e desired image. Start — allows you to scan additional document s and append them to the current images. Stop — cancels the scann ing of documen ts. Done — click this icon when you ha ve finished vie[...]

A-61602 January 2008 35 Using function numbers When you have assigned the function numbers, they can be easily launched by using the S tart button on the scanner or from the smart touch function listing. Launching from the scanner: 1. Use the arrow button to scroll throug h the function numbers an d select the desired function. 2. Press the Start b[...]

36 A-61602 January 2008 4 Ima ge Processing Overview This chapter introduces concept s that may be new to many users. The Kodak ScanMate i1 120 Scanner provides the a bility to process scanned images to improve their qualit y . Using these features the scanner can sometimes make the scanned ima ge look better than the original document. Basic image[...]

A-61602 January 2008 37 Scan V alidation T ool dialog box The Scan V alidation T ool (SVT) is a diagnostic application provided by Kodak. The SVT user interf ace allows access to all the features of the scanner and is a good wa y to verify that the scanner is working properly . The Scan V alidation T ool allows you to verify scanner functionality u[...]

38 A-61602 January 2008 Save Images to Files — saves the images to th e specified directory . Display Every  enter the sampling rate of the imag es you want to display while scanning. For example, to see every image, en ter a value of 1. T o see every 10 th image, enter a value of 10. To t a l  displays the total number of images scann ed d[...]

A-61602 January 2008 39 How do I begin? The goal is to make scanning as simple a s possible. This is accomplished by selecting a Setting Shortcut from the main Kodak Scanner window and then selecting OK/Sca n . The scanner comes with some Setting Shortcut s already def ined. In most cases, you will find that these shortcut s are all you will need. [...]

40 A-61602 January 2008 Selecting Image settings From the main Kodak Scanner window: 1. Select a predefined Setting Sh ortcut from the Setting Shortcut s list. Choose a Setting Shortcu t that desc ribes as closely as possible the image output you desire. 2. Determine if you want to capture an electronic imag e of the front of your document, back of[...]

A-61602 January 2008 41 5. If you are satisfied with your selecte d image processing options, reload your document if necessary and click OK/Scan . • If th e images are accepta ble, the image processing settings are fine and you do not need to click t he Settings button to alter any values in the General, Size, Adjustments o r Enhancements t abs.[...]

42 A-61602 January 2008 Selecting Device settings 1. Select the Setting Shortcut that you just cre ated. 2. Select Settings to access the Image Settings windo w . 3. Select Device . The Device Settings window will be displayed. 4. Before making any adjustment s, click through the tabs on the Device Settings window to get familiar with features that[...]

A-61602 January 2008 43 The main Kodak Scanner window The main Kodak Scanner window is the ho me window of the scanner ’s user interface. Y ou can scan by simp ly selecting a Setting Shortcut and then selecting OK/Scan . Setting Shortcut s — provides a listing of the Setting Shortcut s currently set up. The supplied shortcuts are: • Default ?[...]

44 A-61602 January 2008 • If you have made changes to a Setting Short cut and have not saved your changes, the Setting Shortcu t will be appended with the text < changed >, and the name will be displayed in it alics (e.g., *Default<changed> ). Input document is — allows you to select which sides of the document has information that [...]

A-61602 January 2008 45 Move Up — moves the selected Setting Shortcut up one position in the Setting Shortcut list. When you move a Setting Shortcut, it will stay in that position until you move it again. Move Down — moves the selected Setting Shortcut down one position in the Setting Shortcut list. When you move a Setting Shortcut , it will st[...]

46 A-61602 January 2008 The Image Settings window From this window you can define image p rocessing options by using the available t abs. The values used in Image Settings are saved in the selected Setting Shortcut. The Image Set tings window includes the following tabs: General, Size, Adjustment s and Enhancements. Side — allows you to select wh[...]

A-61602 January 2008 47 T oolbar buttons Preview area The main purpose of the preview area is to display a sample image that is based on your current shortcut setting s. An image will be displayed in this area after a p review scan has been performed. The displaye d image will automatically show the ef fe cts of your settin gs, in most cases, witho[...]

48 A-61602 January 2008 General tab The General t ab cont ains the commonly used image o ptions. In most cases, you will not have to change o ptions on other t abs. Scan as — allows you to select the electronic image format. • Color (24-bit) : produces a color version of your documen t. • Grayscale (8-bit ): produces a graysca le version of y[...]

A-61602 January 2008 49 Compression — allows you to reduce y our electronic image size . • T ype : the scanner will produce a colo r version of your document. - (none) : no compression, which may produce a large image size. - Group-4 : uses a CCITT st andard to compress a black and white image, often used in con junction with TIFF files. - JPEG[...]

50 A-61602 January 2008 Size t ab The Size tab allows you to define values relating to the image output (i.e., cropping values, p aper size, etc.). Document — allows you to select how the scanner will dete ct your document as it is being fed through the scanner . • Automatically Detect and S traighten : the scanner will automatically find each [...]

A-61602 January 2008 51 Outline — allows you to select the location and size of your electronic image. The preview area will show the o utline. • Origin (x, y) : - if you select Document: Manually Select, (x) is the distance from the left edge of the scanner ’s p aper path and (y) is the distance from the first portion of the document detecte[...]

52 A-61602 January 2008 Post-scan rot ation options — allows yo u to select any rot ation to be applied to the electronic imag e after it has been scanned. • (none) • 90, 180, 270 degree s — the amount of rotation th at will be performed. The following example shows how these settings ef fect a document that was fed landscape: Landscape Fee[...]

A-61602 January 2008 53 Adjustment s t ab : black and white The options available on the Adjustment s tab depend on the Scan as selection on the General t ab. The following opt ions are based on a Scan as selection of Black and White . Conversion quality — these settings ef fect how the scanner analyzes a grayscale version of the document which i[...]

54 A-61602 January 2008 Threshold — aids in controlling the level at which a pixel is considered black or white. Decreasing this setting will make the image ap pear lighter , and can be used to subdue backgrou nd noise. Increasing this setting will make the image appear darker , and can be used to help pick up light informat ion. The options rang[...]

A-61602 January 2008 55 Adjustment s t ab: color or grayscale The options available on the Adjustment s tab depend on the Scan as selection on the General t ab. The following opt ions are based on a Scan As selection of Color or Grayscale . Brightness — changes the amount of white in t he color or grayscale image. The values range from -50 to 50 [...]

56 A-61602 January 2008 Enhancement s t ab The options on the Enhancement s t ab depend on the Scan as selection on the General tab. Image Edge Fill — fills the edg es of the final electronic image by covering the area with the specified color . • Color : allows you to select the color to fill the edges with. - (none) -W h i t e -B l a c k • [...]

A-61602 January 2008 57 Blank Image Detection — allows you to configure the sca nner to not include blank ima ges. • On : turns Blank Image Detection on and makes the rest of the Blank Image Detection options availa ble. • Delete if file size is less than: allows you to select the minimum image size that the scanner will con s ider to be non-[...]

58 A-61602 January 2008 Advanced Image Setup The Advanced t ab The Advanced Image Setup icon is loca ted at the top of the Image Settings window next to the Side drop-down box. When you select the Advanced Image Setup icon, the Advanced tab will be displayed. Input document is — select Tw o S i d e d , One sided - Front, or One sided - Back depen[...]

A-61602 January 2008 59 NOTE: The Different settings per side option is only available for duplex scanner models. Images per side — indicates how many images the scanner will create for a side, based on you imagin g selections. • One : indicates you want the sca nner to create one image. • Multiple : indicates you want the scanner to create m[...]

60 A-61602 January 2008 Images to Configure — indicates which electr onic images you need to configure. NOTE: This is only available if you select anything other than One from the Images per side option. For pro cedures on how to configure advanced options, see the sections that follow , entitled: • Creating multiple images for each side of a d[...]

A-61602 January 2008 61 Creating multiple images for each side of a document, Example 1 In this example, let’ s assume you want to configure a scan session that have documents wit h information on both sides and you want the scanner to produce both a color and a black and white image for each side of each document. 1. Select a Setting Shortcut fr[...]

62 A-61602 January 2008 7. By default the scanner will produce the color/ grayscale image first and deliver it to the scanning a pplication, then it will produce and deliver the black and white image. If you wan t the black and white image to be produced and deliver ed first: • make sure Black and White(1-bit) is selected • select Move up to pl[...]

A-61602 January 2008 63 Creating different settings for each side of a document, Example 2 In this example, let’ s assume you want to configure a two-sided document stream of business document s that have color on the front of the document but the rear side is fine in black and white. 1. If you are not already on the Advanced t ab: • Select a S[...]

64 A-61602 January 2008 7. Select Color (24-bit) for the Scan as optio n on the General ta b. NOTE: Make any other adjustment s to the front side settings on the rest of the t abs on the Image Settings window . 8. Select Sides: Back. 9. Select Black and White (1-bit) for the Scan as option on the General tab. NOTE: Make any other adjustment s to th[...]

A-61602 January 2008 65 Creating a new Setting Shortcut 1. From the main Kodak Scanner window , select a Setting Shortcut from the list. It is recommended that you select a shortcut that most closely describes the desired image output. 2. Determine if you want to capture an electronic imag e of the front of your document, back of your document or b[...]

66 A-61602 January 2008 4. Select the appropriate options on the General t ab. NOTE: If necessary , review each setting on the other t abs and make any changes. 5. Place one represent ative document in the input tray of the sca nner . 6. Select Preview to review the resulting imag e. NOTE: If the images are not acceptable, you ca n either select a [...]

A-61602 January 2008 67 Changing Image settings 1. Select a Setting Shortcu t from the main Kodak Scanner window that closely describes your desired output. 2. Select an Input docu ment is option from the main Ko dak Scanner window . 3. Select Settings to display the Image Settings windo w . 4. Before making any adjustment s, browse through the tab[...]

68 A-61602 January 2008 The Device Settings window From this window you can set all scan ner-specific options, as well as diagnostics, by using the available t a bs. The values used in Device Settings are saved in the selected Setting Shortcut. the Device Se tting window includes the General a nd Multifeed tabs. Home — returns you to the main Kod[...]

A-61602 January 2008 69 Device - General t ab The General t ab allows you to set scann er-specific transp ort control options. Paper Source • Document Feeder : when you are scannin g documents from the input tray . Power Saver — allows you to set the amount of time the sca nner has to be inactive before going into p ower saver mode. Y ou can tu[...]

70 A-61602 January 2008 Device - Multifeed t ab Multifeed detection aids in docu ment pro cessing by detecting documents that may go t hrough the feeder overlapped. Multifeed s can happen due to sta pled documents , adhesives on document s, or electrostatically charged documents. Length Detection — allows you to select the maximum length of the d[...]

A-61602 January 2008 71 Changing Device settings 1. Select a Setting Shortcu t from the main Kodak Scanner window that closely describes your desired output. 2. Select Settings to display the Image Settings windo w . 3. Select Device to display the Device Settings window . 4. Before making any adjustment s, browse through the tabs on the Device Set[...]

72 A-61602 January 2008 The Diagnostics window From this window you can access the diagn ostic functions of the scanner . The Diagnostics window inclu des the following ta bs: General, Debug and Logs. The Diagnostics windo w can be accessed via the Diagnostics button which is located on the General tab of the Device Settings window . Done — retur[...]

A-61602 January 2008 73 Diagnostics - Debug t ab The Debug t ab allows you to store the communications betwe en the scanner and a scanning application to a f ile that can be reviewed later . In addition, the resulting images (both before and a fter image processing has been done) can be sa ved. Logging — saves the communications between the scann[...]

74 A-61602 January 2008 Images - Sent T o Application • Save : click this checkbox to save fi nal images from the sca nner (after image processing is applied). • File prefix : use a relevant file prefix to more easily find and sort the saved images. Img is the default. Delete — deletes any images that have been saved from previous jobs. Diagn[...]

A-61602 January 2008 75 5 Maintenance Cleaning procedures Y our scanner needs to be clean ed periodically . If your documents do not feed easily , if several document s feed at the same time or if streaks appear on your images, it is time to clean your scanner . The section entitled, “Supplies and consumables” at the end o f this chapter provid[...]

76 A-61602 January 2008 Cleaning the rollers 1. Open the scanner cover . 2. With a roller cleaning pa d, wipe the feed roller from side to side. Rotate the feed rollers to clean the entire surface. 3. Wipe the NFR rolle rs from side to side. Rot ate the NFR rollers to clean the entire surface. NOTE: For easier cleaning of the NFR rollers, you may w[...]

A-61602 January 2008 77 Cleaning the pre- sep aration p ad 1. Open the scanner cover . 2. Squeeze the plastic clamps that hold the pre-sep aration p ad in place and lift the p re-separa tion pad out of position. 3. Wipe the pre-sepa ration pad from top t o bottom with a roller cleaning pad. 4. Reinsert the pre-sep aration pad into posit ion, aligni[...]

78 A-61602 January 2008 Cleaning the calibration area 1. Open the scanner cover . 2. Remove dust and debris from this area b y using a S taticide wipe or a small brush. Be careful not to scratch the glass (may cau se image quality problems) or bend the white t abs on the front calibration guide ( bending the tabs may cause p aper feeding problems) [...]

A-61602 January 2008 79 Replacement procedures Replacing the pre- sep aration p ad Degradation of feeder performan ce, multiple feeds, stopp ages, etc. indicate a need to change the pre-separation p ad. Certain paper types such as carbonless paper o r newsprint, or failure to clean regularly , and/or use of non-recommended cleaning solvents can sho[...]

80 A-61602 January 2008 Replacing the feed roller assembly 1. Open the scanner cover . 2. Remove the input tray by pulling it forward and lif ting it out of position. Set it aside. 3. Rotate the orang e tab upward to release the feed roller assembly . 4. Lift the feed roller assembly up an d out of the scanner .[...]

A-61602 January 2008 81 5. Install the new fe ed roller assembly by aligning the shaf t end of the assembly in position. 6. With the orange tab in the upward position, snap the f eed roller assembly in place. 7. Rotate the orang e tab down. If the tab is n ot in the down position, you will not be able to reinstall the input tray .[...]

82 A-61602 January 2008 8. Reinstall the input tra y by locating and aligning the four t abs on the input tray with the slot s on the scanner . 9. When tabs and slots are in place, roll the input tray toward the back of the scanner until it snap s into place. Supplies and consumables Contact your scanner supplier t o order supplies. NOTE: Items and[...]

A-61602 January 2008 83 6 T roubleshooting Occasionally you may encounter a situation with your scanner where it may not function properly . Refer to the information in this chapter to help you resolve the situation bef ore callin g T echnical Support. Indicator light s and error codes The indicator light s provide information on the current st ate[...]

84 A-61602 January 2008 Problem solving Use the chart below as a guide to check possible solutions to problems you m a y e n cou n ter when u si n g the K o dak Scan M ate i 1 1 2 0 Sca n ne r . Problem Possible Solut ion Scanner will not scan /feed documents Make sure that: • the power cord is plugged secur ely into the back of scanner and the w[...]

A-61602 January 2008 85 Image appears to be cut of f If you are scanning a docume nt wit h a reflective area (such as a hologram on a credit car d), and this reflective area is fed “face up” an d off-center such th at it p asses over the left-edge sensor , the sensor will be triggered as if it were the end of the page and will result in a cut-o[...]

86 A-61602 January 2008 Scanner not working If your scanner is not working, you may have to reinst all the drivers. T o verify this: 1. Click on My Computer and select Properties. 2. Click on the Hardware t ab and select Device Manager . 3. From the Device Manager screen, select Imaging devices . If the Kodak ScanMate i1 120 Scanner appears, with a[...]

A-61602 January 2008 87 4. Double-click on the Kodak ScanMat e i1 120 Scanner . The Scanner Properties dialog box will be displayed. Select the Driver t ab. 5. Click Up date Driver . The Upgrade Device Driver Wizard will be displayed. 6. Click Next .[...]

88 A-61602 January 2008 7. Click Next . 8. Insert the Installation CD in the CD-ROM drive and locate the kdssti.in file. 9. Click Open and proceed with th e prompts to inst all the driver .[...]

A-61602 January 2008 89 T esting for a USB connection When the Kodak device drivers for the Kodak ScanMate i1 120 Scanner is installed, a copy of the USB test softwa re will also be installed. It will be located in this folder (by default) along with the Kodak Scan V alidation T ool software: C:program filesKod akDocument Imagingusbt st.exe If [...]

90 A-61602 January 2008 USB connection issues The USB verification tool will check your operating system and hardware cap ability to determine if you have a functioning USB 2. 0 or if you need to install a USB card . Y our operating system is correctly configured to support USB 2.0. If a functioning USB 2.0 port is present, this dialog box will be [...]

A-61602 January 2008 91 Y ou do not need to inst all any additional USB card(s) The host PC operating system will on ly support USB 1.1 and will not support USB 2.0, but did find a USB port. The Kodak ScanMate i1 120 Scanner is rated and designed to ope rate with USB 2.0, but will function in a USB 1.1 port , however , the scanner will only perform[...]

92 A-61602 January 2008 Appendix A S pecifications Scanner T ype/Spe ed Duplex color scanner with an auto matic document feeder , 20 pages per minute (landscape) Scanning T echnology CC D type, 600 dpi optical resolution Grayscale output bit depth is: 8 Color capture bit d epth is: 24 Color output bit depth is: 24 Output Resolutions 75, 100, 150, 2[...]

ScanMate i1120 Scanner User’s Guid e Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A. © Kodak, 2007. All rights reserved. TM: Kodak, ScanMate A-61601 Part No. 9E8497 COLORS 8.5 x 11” Folded GUIDE COVER-KODAK SCANNERS FO NTS Whitney K Family S IZ E ECO P/N DESIGNER MODIFIED 11.16.07 9E8497A DE MEYER ARTWORK NAME PRINTING INFORM[...]