Kramer Electronics WP-211DS инструкция обслуживания

Kramer Ele ctronics, Ltd. USER MANUAL Model: WP-211DS Wall Plate[...]

Contents i Contents 1 Introduction 1 2 Getting Started 1 3 Overview 1 3.1 About the Power Conn ect Feature 1 3.2 Shielded Twisted Pair (STP) / Un shielded Twisted Pair (UTP) 2 3.3 About the WP-211DS 2 3.4 Recommendations for Ach ieving the Best Performance 3 4 Your WP-211DS 3 5 Using the WP-211DS 5 5.1 Installing the WP-211DS 5 5.2 Wiring the CAT5 [...]

2900- 999999 2 A 1 ADDENDUM (this data is included at the end of the Overview section ) This addendu m adds the following infor mation to the user manual: Caution – No operator-serviceab le parts inside unit. Warning – Us e only th e Kramer Electronics input power wall adapter that is p rovided with this unit 1 . Warning – D isconnect p ower [...]

Introduction 1 1 Introduction Welcome to Kra mer Electronics (since 19 81): a world of unique, creative and affordable solutions to t he infinite range of p roble ms that confront the video, audio and presentation pr ofessional on a d aily basis. In recen t years, we have redesigned and upgrad ed most of our line, making the best e ven better! Our [...]

KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 2 The other unit is fed o ver the sa me CAT5 cable. T he Power Connect feature applies as long as the CAT5 cable is heavy gauge cable (tha t is, it can carr y power). T he distance does not exceed 50 meters on standar d cable. For a distance of 10 0 meters, sep arate power supplies must be connected to th[...]

Your WP-211DS 3 3.4 Recommendation s for Ach ieving the Best Perform ance Achieving the best pe rformance means:  Connecting onl y good quality connectio n cables, thus avoiding interference, deterio ration in signal quality d ue to poor matching, and elevated noise levels (often as sociated with low quali ty cables)  Avoiding interfere[...]

KRAMER: SIMPLE CREATIVE TECHNOLOGY Your WP-211DS 4 Table 1: WP-211DS Front Panel Features # Feature Function 1 XGA INPUT 2 HD15F C onnector Connects to the comp uter graphics s ource 2 2 DEFAULT SELECT S witch Slide to left for inpu t 2, slide to right fo r input 1 3 IN 2 Green LED Lights when the XGA INPUT 2 sou rce is active 4 SIGNAL EXIST I N 1 [...]

Using the WP-211DS 5 5 Using the WP -211DS For details of ho w to:  Install your WP-21 1DS , see section  5. 1  Wire the CAT5 LINE IN / LINE OUT RJ-45 co nnectors, see section  5.2  Connect your WP-2 11DS , see section  5.3  Select the default ma ster source signal, see sect ion  5. 4  Connect the REMOT E c[...]

KRAMER: SIMPLE CREATIVE TECHNOLOGY Using the WP-211DS 6 5.2 Wiring the C A T5 LINE I N / LINE OUT RJ-45 Connect ors Table 3 and Figure 4 define the UTP CAT5 PINOUT , using pin to pin wiring to connect the WP-2 11DS output to the TP-1 20 input: Table 3: CAT5 PINOUT T P - 1 20 C A T 5 I N PU T WP -211 DS CA T 5 OU TP U T PIN Wire Color PIN Wire Color[...]

Using the WP-211DS 7 5.3 Connecting the W P-211DS To connect your WP-21 1DS , d o t h e f oll ow ing : 1. C on n ec t a com p ute r g ra phi cs (mas te r) s ou rce to th e XGA INPUT 1 HD 15F conn ector an d t o th e A UD IO IN 1 3.5mm mini jack, for example, using a Kramer C-GMA/GM A cable 1 . 2. Set the DEFAULT SELEC T sw itch t o I N 1 (th e fact[...]

KRAMER: SIMPLE CREATIVE TECHNOLOGY Using the WP-211DS 8 5.4 Operating using the D efault M aster Source Signal Selection The DEFAULT SELECT s wi tch is factor y preset to IN 1 and the WP-211 DS will detect the presence o f the master source signal at the XG A INPUT 1 connector. If you co nnect active sources to both the XG A INPUT 1 and the XGA INP[...]

Using the WP-211DS 9 5.5 Connecting the REM OT E Connector You can force the ro uting of one of the 2 inputs to the XGA output by remote control. To do so, connect the ap propriate REMOT E input terminal block co nne c t or pi n s t o a dry c ont a ct sw itc h 1 . For ex am ple , a s F igu r e 6 i ll u s t ra t es , t o ro u t e R E MO T E IN 1 t o[...]

KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 10 6 Technical Spec ifications Table 4 includes the tec hnical specificatio ns: Table 4: Technical Specifications 1 of the WP-211DS INPUTS: 2 XGA on HD15F c onnectors 2 unbalanced stere o audio on 3.5 mm mini au dio connectors OUTPUTS: 1 XGA (RG BH V ) on a 10 PI N ter mina l b lo ck co nn[...]

11 LIMITED WARRANTY Kramer Electronics (hereafter Kramer ) warran ts this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years f rom the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty.[...]

Kramer Electron ics, Ltd. Web site: www.kramerelectronics.co m E-mail: info@kramerel.com P/N: 2900-  78 REV 3 For the latest in formation on ou r products and a list o f Kramer distributors, visi t our Web site: www.kra merelectr onics.com, where updates to this user manua l may be foun d. We welcome you r questions, co mments and feedb[...]