Kyocera 1000E инструкция обслуживания

R EcoLAN 1000E Quick Configur ation Guide Network Connectivity for the DP-2800 Printer Alwa ys read this Quick Configur ation Guide thourghly bef ore use. After reading, maintain it in good condition and keep it together with the Quic k Configuration Guide for y our Laser Printer .[...]

FCC Notice: This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.[...]

Introduction The EcoLAN 1000E is an internal network interface card designed specifically for the DP-2800 printer . The EcoLAN 1000E features include: ❒ 10 Mbps Ethernet Interface ❒ 10BaseT / 10Base2 Auto Detection ❒ Multiple Protocol Support ❒ HTTP Server for Management with a Browser ❒ SNMP Support ❒ RS-232 Serial RJ-45 Connector ❒ [...]

T rademarks Kyocera ® is a registered trademark of Kyocera Corporation. NetWare ® is a registered trademark of Novell, Incorporated. Windows ® is a registered trade- mark of Microsoft Corporation. Macintosh ® is a registered trademark of Apple Computer, Incorporated. All other products referenced are trademarks or registered trademarks of their[...]

Contents NetW are 4.x Directory Services Configuration ................ 1 NetW are 2.x & 3.x Configuration ....................................... 5 Windows 95 Peer to Peer Printing Configuration ............ 7 Windows NT Configuration ............................................... 9 Macintosh Configuration ....................................[...]

NetW are 4.x Directory Services Configuration Bindery vs. NDS Setup In addition to its native NDS (NetWare Directory Services), NetW are 4.x can also be used in Bindery emulation. Bindery emulation is provided on the 1000E for users more familiar with the NetW are Bindery than with NDS. If Bindery emulation is preferred, please refer to the NetW ar[...]

3. Define the Print Server , Printer , and Queue. ➪ Select Quick Setup to display the Print Services Quick Setup screen. Note: If you do not have sufficient rights to create objects in this context, Quick Setup will not appear on the menu. Y ou must have the Object Create right in order to add Print Services. ➪ NetW are inserts a default name o[...]

3. Password Protection. Many of the configuration options in the MAP utility are password protected. The default password is: sysadm The password is case sensitive. T o change the password, select Change Password in the System column. 4. NetW are Configuration. ➪ Select Setup NetWare in the Protocols column. ➪ Enter the Print Server Name , Pref[...]

NetW are 2.x & 3.x Configuration 1. Login as Supervisor and start PCONSOLE. 2. Define the Print Queue. ➪ If a Print Queue already exists which will be assigned to the 1000E, skip to step 3. ➪ Select Print Queue Information from the Available Options menu. ➪ Press INSERT , type a name for the new queue to be serviced by the 1000E and press[...]

6. Confirm Successful Configuration. ➪ T urn the printer off and on and wait for a powerup network status page to print. If the network is large, the powerup status page may take several minutes to print. (Note: This time may be reduced by setting a Preferred File Server for the 1000E with the Management Access Program. Refer to the NetW are sect[...]

Windows 95 Peer to Peer Printing Configuration What is Windows 95 Peer to Peer Printing The peer to peer printing software which is included with the EcoLAN 1000E allows Windows 95 PCs to communicate directly with network attached printers. A network server , such as NetWare or Windows NT , is not required for peer to peer printing. The peer to pee[...]

IPX Protocol Installation The IPX protocol is required for peer to peer printing. IPX is not installed by default when Windows 95 is first installed, but it can be easily added using the following procedure. 1. Click on the Windows 95 Start button and select Settings , Control Panel , Network . 2. Check to see if IPX/SPX-compatible Protocol is disp[...]

Windows NT Configuration There are several options for setting up printing in a Windows NT environment. ◆ If a NetWare server is present, NetW are print services may be used by following the NetW are configuration instructions in this guide. ◆ Peer to peer print services may be used by following the Windows 95 instruc- tions in this guide, but [...]

Windows NT 4.0 1. Click on the Windows Start button, select Settings , and Control Panel . 2. Double click on Network and select the Protocols tab. If TCP/IP Protocol is not in the list of Network Protocols, click on Add to install it. 3. Select the Services tab. If either Microsoft TCP/IP Printing or Simple TCP/IP Services is not in the list of Ne[...]

10 Setting Up LPR Printing If the printer driver has not already been installed, please install it from the CD which is shipped with the printer before continuing. In the following instructions, some field or dialog names may be vary depending upon the NT release pack in use. Windows NT 3.51 1. In the Program Manager group Main, open the Control Pa[...]

Macintosh Configuration For Macintosh compatibility , Mita printers must be equipped with the KPDL II PostScript option. Installing the Driver and Selecting the Printer 1. T o install the Macintosh Printer Driver and Utilities from the CD which is provided with the printer , open the Drivers folder , then the USA/English folder , and double click o[...]

UNIX Configuration UNIX printing utilizes a line printer daemon (lpd) to direct print jobs to the printer . The 1000E supports two modes of lpd printing, host-based lpd and printer-based lpd. With host-based lpd, the line printer daemon is run on one or more workstations (hosts) where print jobs are accepted and sent to the 1000E. With printer-base[...]

arp -s <desired_IP_address> <1000E_ethernet_address> The 1000E ethernet address is listed on the network status page as Network Address. For example, arp -s 197.42.211.5 00:40:AF:13:A2:70 4. At the UNIX command prompt, type: ping <desired_IP_address> For example, ping 197.42.211.5 The 1000E will not respond to this ping command, b[...]

Published in June ‘98[...]