Kyocera FS-1300D инструкция обслуживания

OPERATION GUIDE F S - 11 0 0 F S - 13 0 0 D 870CKGB20008 *870CKGB20008*[...]

This Operation Guide is for models FS-1 100 and FS-1300D. Included Guides The following guides are included with this machine. Refer to the proper guide based on your requirements. Operation Guide (This Guide) Describes how to load paper , print, replace toner , clean the printer , and troubleshooting. Inst allation Guide Explains how to install th[...]

i Contents 1 Machine Parts .............. ................ ................. ................ .............. 1-1 Components at the Front of th e Printer .... ................ .............. 1-2 Components at the Rear of the Printer ....... ................ .............. 1-3 Operation Panel ........................ ................ ................[...]

ii[...]

iii Le gal and Safety Inf or ma tion Please read this information before using your machine. Th is chapter provides info rmation on the following topics: Legal Informa tion iv License Agree ment s vi Safety Information x Symbols xiv Installation Precautions xv Precautions f or Use xvii About the Operation Guide xix Conventions in This Guide xx[...]

iv Le gal Infor ma tion Notice on Sof tware SOFTW ARE USED WITH THIS PRINTER MUST SUPPOR T THE PRINTER'S EMULA TION MODE. The prin ter is factory-set to emulate the PCL. The emulation mode can be changed. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The use[...]

v USB This product has been certified by the USB Implementers Forum, Inc.[...]

vi License Ag r eements IBM Program License Agreement The following declarations have been provided in English intentionally . THE DEVICE YOU HA VE PURCHASED CONT AINS ONE OR MORE SOFTW ARE PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNA TIONAL BUSINESS MA CH INES CORPORA TION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHIC[...]

vii For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of: 1. the equivalent of U.S. $25,000 in your local currency; or 2. IBM's then generally available license fee for the Program This limitation will not apply [...]

viii agreement which can be obtained from Monotype Imag ing. Monotype Imaging retains all rights, title and interest to the Software and T ypefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement. 3. T o protect proprietary right s of Monotype Imaging, you ag ree to mainta[...]

ix 14. YOU ACKNOWLEDGE THA T YOU HA VE READ THIS AGREEMENT , UNDERS T AND IT , AND AGREE TO BE BOUND BY ITS TERMS AND COND ITIONS. NEITHER P ARTY SHALL BE BOUND BY ANY ST A TEMENT OR REPRESENT A TI ON NOT CONT AINED IN THIS AGREEMENT . NO CHANGE IN THIS AGREEMENT IS EFFECT IVE UNLESS WRITTEN AN D SIGNED BY PROPERL Y AUTHORIZED REPRESENT A TIVES OF [...]

x S a fe t y I n fo r m at i o n Laser Notice Radio Frequency T ransmitter This machine contains a transmitter module. W e, the manufacturer (Kyocera Mita Corporation) hereby declare that this equipment (p age printer), model FS-1 100 and FS-1300D are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC[...]

xi Caution Labels The printer bears any of the following labels. Ozone Concentration These printers generate ozone gas (O3), which may concentrate in the place of installation and cause an unpleasant smell. T o minimize the concentration of ozone gas to less than 0.1ppm, we recommend you not to install the printer in a confined area where ventilati[...]

xii CE Marking Directive Hereby , Kyocera Mita Corporation, decla res that this page printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. According to Council Directive 2004 / 108 /EC, 2006/95/EC, and 1999/5/EC Manufacturer: Kyocera Mita Corporation T amaki Plant Manufacturer ’s address: 7[...]

xiii Energy Saving Function This printer comes equipped with a Sleep Mode where printer function remains in a waiting state but power consumption is still reduced to a minimum when there is no activity with the printer within a set amount of time. Sleep Mode This printer automatically enters Sleep Mode when approximately 15 minutes have passed sinc[...]

xiv Symbols The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user , other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their meanings are indicated below . The following symbols indicate that the related section includes safety [...]

xv Installa tion Pr ecautions Environment Caution Avoid placing the machine on or in locations which are unst able or not level. Such locations may cause the machine to fall down or fall over . This type of situation presents a danger of personal injury or damage to the machine. Avoid lo cations with humidity or dust and dirt. If dust or dirt becom[...]

xvi Power Supply/Grounding the Machine Wa r n i n g Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. Plug the power cord securely into the outlet. If metallic object s come in contact with the prongs on the plug,[...]

xvii Pr ecautions f or Use Cautions when using the machine Wa r n i n g Do not place metallic objects or cont ainers with water (flower vases, flower pots, cup s, etc.) on or near the machine. This situation presents a danger of fire or electrical shock should they fall inside. Do not remove any of the covers from the machine as there is a danger o[...]

xviii If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to clean ing of internal p arts. This is particularly ef fective if accomplished prior to seasons of high humidity . Consult with your service representative in regard to t[...]

Introduction-xix About the Operation Guide This Operation Gui de contains the following chapters: 1 Machine Part s This chapter explains the names of part s. 2 Loading Paper This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray . 3P r i n t i n g This chapter explains how to install t he prin[...]

Introduction-xx Conventions in This Guide This manual uses the following conventions. Convention Description Example It alic T ypeface Used to emphasize a key word, phrase or reference to additional information. Load the paper in the cassette. Refer to Configuration T ool on page 3-9. Bold Used to denote buttons on the software. T o start printing,[...]

Machine Parts 1-1 1 Mac hine P ar ts This chapter identifies machine parts, indicator s, and operation panel keys. Component s at the Front of the Printer 1-2 Component s at the Rear of the Printer 1-3 Operation Panel 1-4 Indicators 1-5 Keys 1-6[...]

1-2 Machine Part s Component s at the Front of the Printer 1 T op Cover 2 Paper S topper 3 T op T ray 4 Operation Panel 5 Right Cover 6 Paper Cassette 7 Front Cover 8 Manual Feed 9 MP T ray 10 Subtray FS-1 100 1 2 3 4 5 6 7 9 FS-1300D 10 1 2 3 4 5 6 7 8[...]

Machine Parts 1-3 Component s at the Rear of the Printer 11 Optional Interface Slot Cover 12 USB Interface Connector 13 Rear Cover 14 Power Cord Connector 15 Power Switch 11 14 12 15 13[...]

1-4 Machine Part s Operation Panel 1 Ready Indicator 2 Attention Indicator 3 T oner Indicator 4D a t a Indicator 5 Paper Indicator 6 Jam Indicator 7 [Cancel] Key 8[ G O ] Key 2 1 3 4 5 6 7 8[...]

Machine Parts 1-5 Indicators There are six indicators located on the top right of the printer . The indicators are used to identify the status of the printer at any time. T o identify the printer status, check the indicators on the printer and then refer to the table below . Indicator St atus Meaning Ready (Green) Lit Indicates online s tatus (prin[...]

1-6 Machine Part s Keys Refer to the following table for the name and description of the basic functions of each key . Key St atus Operation Function Cancel - Press for 1 second or more Cancels the data from the PC GO At Ready Press momentarily Switches On-line/Off-line Press for 3 to 9 seconds Prints the status page. Press for 10 seconds or more P[...]

Loading Paper 2-1 2 Loading P aper This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray . Paper Specifications 2-2 Prep aring the Paper 2-1 1 Loading Pape r into Cassette 2-1 1 Loading Paper into M P (Multi-Purpose)T ray 2-14[...]

2-2 Loading Pap er General Guidelines The machine is designed to print on standard copier p aper , but it can also accept a variety of other types of paper within the limits specified below . Selection of the right paper is import ant. Using the wrong paper can result in paper jams, curling, poor print quality , and paper waste, and in extreme case[...]

Loading Paper 2-3 Minimum and Maximum Paper Sizes The minimum and maximum paper sizes are as follows. For the p aper smaller than JIS B6, postcards, and envelopes, the MP tray must be used. 105mm (4-1/8 inches) 216mm (8-1/2 inches) 356mm (14 inches) Minimum Paper Size Maximum Paper Size Paper cassette 70mm (2-3/4 inches) 148mm (5-13/16 inches) Mini[...]

2-4 Loading Pap er Selecting the Right Paper This section describes the guidelines for selecting paper . Condition Avoid using p aper that is bent at the edges, curled, dirty , torn, embossed, or contaminated with lint, clay , or paper shreds. Use of paper in these conditions can lead to illegible printing and p aper jams, and can shorten the life [...]

Loading Paper 2-5 Basis weight Basis weight is the weight of paper expressed in grams per square meter (g/m²). Paper that is too heavy or too light may cause feed errors or paper jams as well as premature wear of the product. Uneven weight of paper , namely uneven paper thickness may cause multiple-sheet feeding or print quality problems such as b[...]

2-6 Loading Pap er The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is high and the paper absorbs moisture, the paper edges exp and, becoming wavy in appearance. When the relative humidity is low and the paper loses moisture, the edges shrink and tighten, and print contrast may suffer . W a[...]

Loading Paper 2-7 Special Paper The following types of special paper can be used: • Thin paper (60 to 64 g/m²) • Thick paper (90 to 220 g/m²) • Colored paper • Recycled paper • Overhead projector transparencies • Cardstock • Coated paper • Envelopes • Labels Use paper that is sold specifically for use with copiers or printers (h[...]

2-8 Loading Pap er Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the extra top sheet from the carrier sheet until after printing is finished. The table below list s the specifications for adhesive label paper . Postcards Up to 10 postcards can be loaded at a time. Fan the stack of postcards and al[...]

Loading Paper 2-9 Thick Paper Fan the stack of pape r and align the edges before loading them in the MP tray . Some types of paper have rough edges on the back (those are created when the paper is cut). In this case, put the paper on a flat place and rub the edges once or twice with, for example, a ruler to smooth them. Feeding rough edged paper ma[...]

2-10 Loading Pap er Paper T ype The printer is capable of printing under the optimum setting for the type of paper being used. A different p aper type setting can be made for each paper source including the MP tray . Not only can preset paper types be selected, but it is also possible for you to define and select customized paper types. Paper type [...]

Loading Paper 2-1 1 Prep aring the Paper After removing p aper from the packaging, fan through the sheet s to separate them prior to loading. If using paper that has been fold ed or is curled, straighten it prior to loading. Failure to do so may result in a paper jam. Loading Paper into Cassette 250 sheet s of 1 1 × 8 1/2" or A4 paper (80 g/m[...]

2-12 Loading Pap er 3 Adjust the position of the width guides located on the le ft and right sides of the cassette. Press the releas e butt on on the left guide and slide the guides to the paper size required. 4 Adjust the paper length guide to the paper size required. If you are going to use paper that is longer than A4, pull out the extension pap[...]

Loading Paper 2-13 6 Insert the paper cassette into the slot in the printer . Push it straight in as far as it will go. There is a paper gauge on the lef t side of the front of the paper cassette to indicate the remaining paper supply . When paper is exhausted, the pointer will go down to the level of (empty). 7 S pecify the p aper size and type fo[...]

2-14 Loading Pap er Loading Paper into MP (Multi-Purpose)T ray FS-1300D can load 50 sheets of 1 1 × 8 1/2" or A4 paper (80 g/m²) into the MP T ray . On the other hand, FS-1 100 can one sheet into the Manual Feed . 1 Pull the MP tray towards you until it stops.. 2 Adjust the position of the paper guides on the MP tray . S tandard paper sizes [...]

Loading Paper 2-15 4 Align the paper with the p aper guides and insert as far as it will go. FS-1300D FS-1 100 Note Do not load more paper than exceeds the tab of the MP tray (for FS-1300D only). Note If the paper is considerably curled in one direction, for example, if the paper is already printed on one side, try to roll the paper in the opposite[...]

2-16 Loading Pap er When loading envelope, place with the envelope flap closed and keep the printing side face-up. Insert envelope against the guide with the flap on the front or left side until they stop. 5 S pecify the p aper size and type for MP tray using Configuration T ool . For more information, refer to Configuration T ool on page 3-14 . Co[...]

Connecting an d Prin tin g 3-1 3 Connecting and Printing This chapter explains how to start up the printer , print from your PC, and use the application software included in the CD-ROM. Connections 3-2 Inst alling the Printer Driver 3-3 Printing 3-7 St atus Monitor 3-10 Configuration T ool 3-14 Uninst alling Software 3-18[...]

3-2 Connecting and Printin g Connections This section explains how to start up the printer . Connecting the USB Cable Follow the steps as below for connecting the USB cable . 1 Connect the USB cable (not included) to the USB Interface Connector . 2 Connect the other end of the USB cable to the computer's USB interface connector . Connecting th[...]

Connecting an d Prin tin g 3-3 Inst alling the Printer Driver According to the instructions of the Installation Guide, connect the PC to the printer and turn on them to install the p rinter driver . For more information on printer driver , refer to the KX Driver User Guide . Inst alling the Printer Driver on Windows PC This section explains how to [...]

3-4 Connecting and Printin g Express Mode When selecting Express Mode , printer driver and fonts are installed. After inst allting with this mode, the other utilities can be added using Custom Mode . 1 On Installation Method screen, click Express Mode . The inst aller searches the connected printers on Discover Printing System screen. If no printer[...]

Connecting an d Prin tin g 3-5 Custom Mode When selecting Custom Mode , printer port and utilities are changed as necessary . 1 On Installation Method screen, click Custom Mode . 2 On Driver t ab and Utility tab of the Custom Installation screen, select the printer driver and utilities you want to install, and click Next . 3 On Printer Port screen,[...]

3-6 Connecting and Printin g Inst alling the Printe r Driver on Mac OS This section explains how to install the printer driver in Mac OS. 1 Ensure the printer is connected to the computer's USB or Network port before installing software from the CD-ROM. 2 Insert the CD-ROM (Product Library) into the CD-ROM drive. 3 Double-click the CD-ROM icon[...]

Connecting an d Prin tin g 3-7 Printing This section explains the printing procedure from an application software. Y ou ca n specify the printing settings from each tab on KX Driver . KX Driver is stored in the CD-ROM (Product Library) . For more information, refer to the KX Driver User Guide . About KX Driver KX Driver consists of the following ta[...]

3-8 Connecting and Printin g Manual Duplex (For FS-1 100 only) Use Manual Duplex if you require printing on both sides of the paper . The even pages are printed first and then reloade d to print the odd pages. An instruction sheet is available to assist with loading the sheet s in the correct orientation and order . 1 Ensure Cassette 1 is selected [...]

Connecting an d Prin tin g 3-9 5 Load the even pages printed into the p aper cassette with the instruction sheet facing up and the arrows pointing toward the printer . 6 Select OK on the Manual Duplex instruction message box. All the odd pages will be printed. Note If the paper is considerably curled in one direction, roll the paperin the opposite [...]

3-10 Connecting and Printin g St atus Monitor The S tatus Monitor monitors the printer st atus and provides an ongoing reporting function. It also allows you to specify and modify settings for printers not included in the KX driver . The S tatus Monitor is inst alled automatically during KX driver inst allation. Accessing the St atus Monito r Use e[...]

Connecting an d Prin tin g 3-1 1 If an information notification event occurs, the 3D view and an alert sound are used to notify you. For information on the sound notification settings, refer to S tatus Monitor Settings on p age 3-12 . St atus Monitor icon The St atus Monitor icon is displayed in the t askbar notification area when the S tatus Monit[...]

3-12 Connecting and Printin g St atus Monitor Settings The S t atus Monitor has two tabs to configure its settings. Use the Preference opti on to set up the S tatus Monitor . Sound Notification T ab The Event Notification tab cont ains the following items. Enable Event Notification Select to enable or disable monitoring the event s in Available eve[...]

Connecting an d Prin tin g 3-13 Appearance T ab The Appearance tab is contains the following items. Enlarge window Doubles the size of the S tatus Monitor window . Always on top Positions the St atus Monitor in front of other active windows. T ransparency Displays the St atus Monitor as a transp arent window .[...]

3-14 Connecting and Printin g Configuration T ool The Configuration T ool allows you to check and/or change the settings for printers not included in the KX driver . The Configuration T ool can be used for printers connected to the PC via a USB cable . Accessing the Configuration T oo l Follow these steps to display the Configuration T ool on the d[...]

Connecting an d Prin tin g 3-15 Statu s T a b The S t atus tab displays current information about the device, such as the model name, system firmware, engine firmware, serial number , total memory , and number of printed pages. Input T ab The Input ta b displays information about the paper feeder attached to the machine, such as the current paper l[...]

3-16 Connecting and Printin g Printer T ab The Printer tab allows you to set print processing p arameters that are not available in the KX driver . As well as the form feed timeout, you can change the memory size used for processing raster dat a such as bitmap and JPEG files. Connection T ab Y ou can use the Connection tab to set the emulation. Y o[...]

Connecting an d Prin tin g 3-17 Others T ab The Others tab enables you to configure the print er settings shown below . Item Description Auto sleep Configures the amount of time when the printer automatically enters Sleep Mode. Click Advanced to turn Auto sleep On or Off . EcoFuser Enables or disables the EcoFuser . Select On to reduce the power co[...]

3-18 Connecting and Printin g Uninst alling Sof tware The CD-ROM lets you remove the printer sof tware . 1 Click Remove Software . The Kyocera Uninst all er appears. 2 Select the software p ackage to remove. 3 Click Uninstall . The uninstaller start s. 4 When Uninstall complete screen appears, click Finish . 5 Select whether you restart your comput[...]

Maintenanc e 4-1 4 Maintenance This chapter explains how to replace the toner container and clean the printer . General Information 4-2 T oner Cont ainer Re placement 4-2 Cleaning t he Printer 4-6 Prolonged Non-Use and Moving the Printer 4-9[...]

4-2 Maintenance General Information This chapter describes basic maintenance tasks you can perform for the printer . Y ou can replace the toner container according to the printer's status: Also, the internal part s need periodic cleaning. T oner Cont ainer Replacement The T oner indicator identifies the toner status at two stages of toner usag[...]

Maintenanc e 4-3 Replacing the T oner Con t ainer This section explains how to replace the toner container . 1 Open the top cover . 2 Tu r n lock lever to the unlock position. Push lock lever to the position marked arrow and pull out the toner container . CAUTION Do not attempt to incinerate the Toner Container. Dangerous spa rks may cause burns. I[...]

4-4 Maintenance 3 T ake the new toner container ou t of the toner kit. Shake the new toner container at least 5 times as shown in the figure in order to distribute the toner evenly inside the container . 4 Remove the label from the toner cont ainer . 5 Install the new toner container in the printer . Push firmly on the top of the container at the p[...]

Maintenanc e 4-5 6 Tu r n lock lever to the lock position. 7 Close the top cover .[...]

4-6 Maintenance Cleaning the Printer T o avoid print quality problems, the interior of the printer must be cleaned with every toner container replacement. 1 Open the top cover and front cover . 2 Lift the process unit together with the toner cont ainer out of the printer . 3 Remove the drum unit from the printer by holding the green levers with bot[...]

Maintenanc e 4-7 4 Place the drum unit flat on a clean, level surface. 5 Use a clean, lint free cloth to clean dust and dirt away from the metal registration roller . 6 Slide the charger cleaner (green) back and forth 2 or 3 times to clean the charger wire , then return it to its original position (CLEANER HOME POSITION ). 7 When cleaning is comple[...]

4-8 Maintenance 8 Return the process unit to its position, aligning the guides at both ends with the slots in the printer . Then, close the front cover and top cover .[...]

Maintenanc e 4-9 Prolonged Non-Use and Moving the Printer Prolonged Non-use If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet. We recommend you consult with your dealer about the additional actions you should take to avoid possible damage that may occur when the printer is used next time. Mov[...]

4-10 Maintenance[...]

T roublesho oting 5-1 5 T r oubleshooting This chapter explains how to handle printer problems, understand indicator combinations, and clean paper jams . General Guidelines 5-2 Print Quality Problems 5-3 Underst anding Indicators 5-5 Cleaning Paper Jams 5-9[...]

5-2 T roubleshooting General Guidelines The table below provides basic solutions for problems you may encounter with the printer . We suggest you consult this table to troubleshoot the problems before calling for service repairs. Tips Printer problems may be solved easily by following the tips below . When you have encountered a problem that cannot[...]

T roublesho oting 5-3 Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer . If the suggested corrective action will not solve the problem, call for service. Printed[...]

5-4 T roubleshooting Faint or blurred p rinting Check the toner container and if necessary replace. Refer to T oner Container Replacement on page 4-2 . Clean the charger wire . Refer to Cleaning the Printer on page 4-6 . Gray background Check the toner container and if necessary replace. Refer to T oner Container Replacement on page 4-2 . Check the[...]

T roublesho oting 5-5 Underst anding Indicator s The indicator displays generally fall into one of three categories: normal operation, maintenance and errors (repairs). Click the icon to play the animation of the indicator combinations. Right-click an indicator , then select Playback and Play to play the animation repeatedly . Normal Indication The[...]

5-6 T roubleshooting The printer is receiving data. Printing resumes when the [GO] is pressed. The printer is printing the last page af ter waiting. Printing is possible. Offline status. Y ou cannot print, but the printe r can receive data. The printer returns to online st atus when the [GO] is pressed. The printer is in sleep mode.The printer retu[...]

T roublesho oting 5-7 Maintenance Indication The table below shows the indicator combinations when user intervention is required. It is assumed that the printer is online and is processing data. Indicator Meaning Remedy There is no pape r in the cassette , MP tray , or Manual Feed . Load paper into the pape r sour ce . The cassette is not inserted [...]

5-8 T roubleshooting Error Indication If the indicators light or f lash repeat edly in mann ers not descr ibed above for normal or mainten ance indication, a service error has probably occurred . Turn the prin ter off by the power switch, wait 5 seconds and then turn the prin te r on again. This may clear t he error. Even if the error is not cleare[...]

T roublesho oting 5-9 Cleaning Paper Jams If paper jams in the p aper transport system, or no p aper sheets are fed at all, the printer automatically goes offline, and the Jam indicator will light. S tatus Monitor or COMMAND CENTER can indicate the location of the paper jam (the component where the p aper jam has occurred). Remove the paper jam. Af[...]

5-10 T roubleshooting General considerations for clearing jams Bear in mind the following considerations when attempting paper jam removal: • If paper jams occur frequently , try using a different type of p aper , replace the paper with p aper from another ream, or flip the paper stack over . The printer may have problems if paper jams recur afte[...]

T roublesho oting 5-1 1 Paper Cassette/Paper Feeder 1 Pull out the cassette or optional paper feeder . 2 Remove any partially fed p aper . 3 Push the casse tte back in securely . The printer warms up and resumes printing. IMPORTANT Do not try to remove paper that has already been partially fed. Proceed to Inside the Printer on page 5-13 . Note Chec[...]

5-12 T roubleshooting Duplexer Paper is jammed in the duplex section . Remove the jammed paper using the procedure given below . 1 Pull the paper cassette all the way out of the printer . 2 Open the duplexer's cover in front of the printer and remove any jammed paper . Open the duplexer's cover at the rear of the printer and remove any ja[...]

T roublesho oting 5-13 Inside the Printer 1 Pull the paper cassette all the way out of the printe r . Remove any partially fed p aper .. 2 Open the top cover and front cover , and lift the process unit together with the toner contain er out of the printer . 3 Remove the drum unit from the printer by holding the green levers with both hands. 4 If th[...]

5-14 T roubleshooting 5 Return the drum unit to its position, aligning the guides at both ends with the slots in the printer . 6 Insert the process unit together with the toner container , back into the machine. Close the top cover and the front cover . The printer warms up and resumes printing.[...]

T roublesho oting 5-15 Rear Cover 1 Open the rear cover and remove the jammed p aper by pulling it out. If the paper is jammed inside the fuser unit , open the fuser cover and remove the paper by pulling it out. 2 Close the rear cover , and open and close the top cover to clear the error . The printer warms up and resumes printing. CAUTION The fuse[...]

5-16 T roubleshooting[...]

Option 6-1 6O p t i o n This chapter explains the options for this printer . General Information 6-2 Exp ansion Memory M odules 6-3 Paper Feeder (PF-10 0 ) 6-6 Network Interfac e Card (IB-23) 6-7 Comp actFlash (CF) Ca rd 6-8[...]

6-2 Option General Information The printers have the following options available to satisfy your printing requirements. For instructions on installing individual options, refer to the documentation included with the option. Some options are explained in the following sections. Note Install the memory module before installing the optional paper feed[...]

Option 6-3 Exp ansion Memory Modu les T o expand the printer memory for more complex print jobs and faster print speed, you can plug in optional memory module (dual in line memory module) in the memory slot provided on the printer main controller board. Y ou can select additional memory module from 64, 128, 256 or 512MB. The maximum memory size is [...]

6-4 Option Inst alling the Memory Module 1 T urn of f the printer and disconnect the power cord and printer cable . 2 Remove the right cover with a piece of metal similar to coin. 3 Remove the fixing tape in case of the first inst allation. Then, remo ve the memory slot cover as shown in the figure. 4 Push out the clamps on both ends of the memory [...]

Option 6-5 7 The memory module is secured to the memory socket with the clamps. 8 Reinstall the memory slot cover and the right cover . Removing a Memory Module To r e m o v e a memory module , remove the right cover and the memory slot cover from the printer . Then, carefully push out the two socket clamps . Ease the memory module out of the socke[...]

6-6 Option Paper Feeder (PF-100 ) The PF-100 allows you to add one (for FS-1 100) or two (for FS-1300D) more paper cassette to the bottom of the printer for continuous feeding of a large volume of paper . Each paper cassette can hold up to approximately 250 sheets of ISO A4, ISO A5, JIS B5, Letter , or Legal size (80g/m 2 ) paper . This feeder is a[...]

Option 6-7 Network Interface Card (IB-23) The network interface card supports TCP/IP , IPX/SPX, NetBEUI and AppleT alk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetW are, etc. The network interface card must be installed in the option interface slot that is located at the back of the prin[...]

6-8 Option Comp actFlash (CF) Card The printer is equipped with a slot for a CF card with the maximum size of 256MB. A CF card is useful for storing fonts, macros, and overlays. 1 T urn of f the printer and disconnect the power cord and printer cable . 2 Open the rear cover . 3 Remove the optional interface slot cover . When the Network Interface C[...]

Option 6-9 4 Insert the CF Card . 5 Secure it with the screws removed in step 3. 6 Connect the power cord and printer cable and turn on the printer .[...]

6-10 Option[...]

Appendix 7-1 7 A ppendix This section lists the specif ications of this printer . Specifications 7-2 Environment al St andard Requirements 7-4[...]

7-2 Appendix Specifications Note These specifications are subject to change without notice. Item Description FS-1 100 FS-1300D T ype Desktop Printing Method Electrophotography , laser scan Paper Weight Cassette 60 to 120 g/m² 60 to 120 g/m² (Duplex: 60 to 105 g/m²) MP T ray 60 to 220 g/m² Paper T ype Cassette Plain, Preprinted, Bond, Recycled, [...]

Appendix 7-3 Continuous printing 1 to 999 sheets Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 d pi Monthly Duty A verage 1,500 pages Maximum 15,000 pages Operating Environment T emperature 10 to 32.5°C/50 to 90.5°F Humidity 15 to 80 % Altitude 2,500 m/8,202 ft maximum Brightness 1,500 lux maximum Controller PowerPC 405F5/360 MHz Suppor[...]

7-4 Appendix Environment al S t andard Requirement s This machine conforms to the following environmental st andard requirements. • T ime for switching to Sleep mode (default): 15 minutes • Duplex Printing: S t andard Equipment • Durable paper for feeding: Paper made of 100% recycled p aper NOTE: Contact your Dealer or Service Represen tative[...]

Index-1 Inde x A Adhesive label ......... .............. .............. ............ ........... ..... 2-7 Attention indicator operation pa nel ........................ .............. ................. .. 1-4 C CF card ............... .............. .............. .............. .............. ..... 6-8 option ........... .............. ...........[...]

Index-2 components ... ................. ................. ................. ........1-2 loading paper .................. ................. .............. .........2-14 minimum and maximum paper sizes ................... .....2-3 paper sizes ................ ................. ................. ..............2-4 paper type ................. ........[...]

Index-3 USB interface connector components ...... ................. .............. ................. ........ 1-3 T ips ............ .............. .............. .............. .............. .............. 5-2 Understanding indicat or s ................... .............. .. ... ... ........ 5-5 T op cover components ...... ................. .....[...]

Index-4[...]

E1[...]

[...]

TURKEY Çalıştırma Kılavuzu KM-2560 KM-3060[...]