Lenovo D1960 инструкция обслуживания

D1960 W ide LCD Monitor User ’ s Guide[...]

T ABLE OF CONTENTS ABOUT THIS GUIDE------------------------------------------------------------------------1 NA TIONAL CONVENTIONS---------------------------------------------------------------1 FCC NOTICE --------------------------------------------------------------------------------- 2 PRECAUTIONS ------------------------------------------------[...]

1 About This Guide This guide describes the monitor ’s features, setup, and operation. lnformation in this document is subject to change without notice. The sections are as follows: • Safety Instructions: lists safety information. • Setup: describes the initial setup process. • Using the Monitor: gives an overview of how to use the monitor [...]

2 FCC Notice FCC Class B Radio Frequency Interference Statement W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ins[...]

3 Precautions Read and follow these precautions when connecting and using your computer monitor: PRECAUTIONS • Do not use the monitor near water , e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a pe[...]

4 Setup the stand and base Please setup or remove the base following below steps. Adjusting Viewing Angle • For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor ’s angle. • Y ou [...]

5 Attaching the Cables Cable Connections On Back of Monitor and Computer 1. Power Cord 2. Audio Cable 3. DVI Cable 4. Analog Cable T urn off your computer before performing the procedure below . 1. Connect the power cable to the AC port on the back of the monitor . 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect [...]

6 W all Mounting Preparing to Install An Optional W all Mounting Arm This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer ’s instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the bac[...]

7 1 Auto / Exit 2 Decrease V olume / - 4 Increase V olume / + 5 Menu / Enter Setting the Optimal Resolution The recommended resolution for this monitor is 136 6 by 768. T o setup the monitor to this resolution, follow the steps below . 1. Click ST ART . 2. Click SETTINGS. 3. Click CONTROL P ANEL. 4. Double click DISPLA Y . 5. Click SETTINGS. 6. Set[...]

8 OSD Settings • Press the MENU-button to activate the OSD window . • Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu functions. Once the desired function is highlighted, press M[...]

9 DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology . Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost” . DCC: Dynamic color control ICM: Intelligent color man[...]

10 1) How to use Color Boost? Five color-enhancement settings: T o accommodate various display needs, Color Boost also offers 5 dif ferent color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the ve settings you desire[...]

1 1 Nature Skin: When “Natural Skin” is turned on, the red and yellow colors are enriched automatically , thus presents human skin with more natural and truer colors. “Natural Skin” setting is ideal for viewing human portrait and detailed skin texture. Green Field: When “Green Field” is turned on, the green color is enriched so that foo[...]

12 Sky Blue: When”Sky Blue” is turned on, the color blue is being ne-tuned so that the sky or ocean landscape will look more vivid and in-depth. “Sky Blue” setting is ideal for viewing sky and ocean images. Auto Detect: When “Auto Detect” is turned on, every pigment will be detected and self-adjusted to render a lively picture. Demo:[...]

13 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can also be adjusted. “Picture Boost” is located in the fth icon labeled “Picture Boost” in the OSD menu. T urn on “Bright Frame” to select a zone on the screen to be enhanced. Please n[...]

1 4 Image Adjustment Luminance Adjust Range Description Brightness 0-100 Backlight Adjustment Contrast 0-100 Constrast from Digital-register Eco Standard Standard Mode T ext T ext Mode Internet Internet Mode Game Game Mode Movie Movie Mode Esports Sports Mode Gamma Gamma1 Adjust Gamma1 Gamma2 Adjust Gamma2 Gamma3 Adjust Gamma3 Image Setup Clock 0-1[...]

1 5 LED Indicators Status LED Color Full Power Mode Green or Blue Active-of f Mode Orange or red Notes: 1)If the product has only one signal input, the item of “Input Select” is disable to adjust.[...]

1 6 Problems and Solutions Problem and Questions Possible Solutions Power LED is Not ON • Make sure the power button is ON and the Power Cord is properly connect to a grounded power outlet and to the monitor No Plug & Play • In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer &[...]

1 7 Specications LCD Panel Model Number D1960 wA Driving system TFT Color LCD Viewable Image Size 470mm diagonal Pixel Pitch 0.3mm (H) x 0.3mm (V) Vídeo R, G, B Analog Interface & Digital Interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 85.5 MHz Resolution Horizontal scan range 30 kHz - 80 kHz Horizontal scan Size (Maxi[...]

1 8 EP A ENERGY ST AR ® ENERGY ST AR® is a U.S registered mark. As an ENERGY ST AR® Partner , our company has determined that this product meets the ENERGY ST AR® guidelines for energy efciency . Preset Display Modes ST AND RESOLUTION HORIZONT AL FREQUENCY (kHZ) VERTICAL FREQUENCY (HZ) VGA 640 x 480 @60Hz 31.469 59.94 VGA 640 x 480 @67Hz 35 [...]

19 Pin Assignments D-Sub pins Pin Number 15-Pin Side of the Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 Ground 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 1 1 Ground 12 DDC-Serial data 13 H-sync 14 V -sync 15 DDC-Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS[...]