LevelOne FSW-0809 инструкция обслуживания

LevelOne FSW-0809 4+4 PoE Fast Ethernet Switch User Manual v1.0 - 0706[...]

Safety FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, us es, and can ra[...]

Table of Content INTRODUCTION .............................................. 1 FEATURES ....................................................... 2 PACKAGE CONTEN T ..................................... 3 HARDWARE DESCRIPTION ........................... 4 F RONT P ANEL ................................................. 4 R EAR P ANEL .................[...]

[...]

Introduction The FSW-0809 Switch integrates 100M bps Fast Ethernet and 10Mbps Ethernet net work capabilities in a highly flexible package. And this switch’s Port-1 to Port-4 are Powe r over Ethernet (PoE) ports, and it will automatically detects the presence of IEEE 802.3af-compliant powered device (PD) an d provide s power through the Port-1 to [...]

Features  8 ×10/100Mbps Auto-negot iation Fast Ethernet RJ45 ports with 4-port PoE function (port-1 ~ port-4)  Compliant with 802.3af specification  Supports PoE power up to 15.4W for PoE port  Supports PoE power up to 30W for all PoE ports  Supports PoE Powered Device (P D) classification identify  Each port supports auto MDI/MD[...]

Package Content Open the shipping carto ns of the Switch and carefully unpacks its contents. The carton should contain the following items: – FSW-0809 – AC power adapter (Output: DC48V, 0.8A ) – Four rubber feet – User Manual If any item is found missing or damaged, please contact your local reseller for replaceme nt. 3[...]

Hardware Description This chapter describe s the front panel, rear panel, and LED indicators of the Switch. Front Panel LED Indicator: Comprehensi ve LED indicators di splay the status of the switch an d the network (se e the LED Indicators chapter below). Rear Panel PoE Ports (Port 1~4): These ports are PoE Enabled ports, the PoE port will automat[...]

Ethernet Ports (Port 5~8): These ports support netwo rk speed s of either 10Mbps or 100Mbps, and can ope rate in half- and full- duplex transfer mode s. These ports also supports automatic M DI/MDIX crossover detection function gives true “plug and play” capability, just need to plug-in the network cable to the hub directly and don’t care if [...]

LED Indicators The front panel LEDs provides instant st atus feedback, and, helps monitor and tro ubl eshoot when needed. System Power On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the power cord has improper connection. PoE status (Port 1 ~ Port 4) Green : When the PoE powered device (PD) was c[...]

PoE MAX On : When the system was connected to PoE PD and the power resource remain <=7.5W, the LED lights on, the system will not provide power to the additiona l PoE PD inserted. Off : When the system have enough po wer of >7.5W. Ethernet port status (Por ts 1~8) 10/100M Link/ACT: Link/ ACT : These LED indicators are light ed up when there i[...]

PoE Rule PoE Max: this function will help to protect the PoE Switch and to stabilize the power transmitting to the powered device (PD). If the system power remain <= 7.5 watt, the PoE MAX LED will light on and the system will not provide power to the additional PoE PD to protect the PoE Switch itself and to stabilize the power transmitting to th[...]

Priority: this function will he lp to protect the system when the syst em power was ove r loaded, the system will disable PoE function of the lower priority PoE port to maintain the power budget to the PoE port which is in high priority. The total power resource of the system is 30 watt sharing to the 4 PoE ports (maximum power for per port is 15.4[...]

Installation The setup of the Switch can be perfo rm ed using the following steps: 1. The surface must support at least 1.5 Kg for the Switch. 2. The power outlet should be within 1.82 meters (6 feet) of the Switch. 3. Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. 4. Make sure that there is proper h[...]

Technical Specifications General Standards IEEE 802.3 10BAS E-T Ethernet IEEE 802.3u 100B ASE-TX Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3af Pow er over Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex ) 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half duplex ) 200Mbps (full-duplex) Topology Star Netwo[...]

Performance RAM Buffer: 96K bytes per device Filtering Address Table: 1K entries per d evice Packet Filtering / Forwarding Rate: 10Mbps Ethernet: 14,880/pps 100Mbps Fast Ethernet: 148,800 /pps MAC Address Learning: Automatic update Transmits Method: Store-and-forward 12[...]