LG Electronics 47LV35A инструкция обслуживания

www .lg.c om O WNER’S MANU AL MONIT OR SIGNA GE 4 7L V35A 55L V35A Please r ead this manual caref ully bef ore operating your set and r etain it f or future ref erence. MONIT OR SIGNA GE MODEL S[...]

2 ENG ENGLISH T ABLE OF CONTENTS T ABLE OF CONTENTS 3 LICENSES 4 ASSEMBLING AND PREP ARING 4 Accessories 5 Parts 6 T o Install in a Portrait Layout 7 STORAGE METHOD FOR P ANEL PROTECTION 7 - Correct Method 7 - Incorrect Method 8 Installing on a W all 10 IR Receiver Connection 10 - IR RECEIVER 11 T iling Displays 11 - How to Mount the Set 13 - How t[...]

ENGLISH 3 LICENSES   Product damage from moving or changing the installation location is not covered by warranty .   The warranty will not cover any damages caused by using the product in an excessively dusty environment. NOTE LICENSES Supported licenses may differ by model. For more information of the licenses, visit www .lg.com. The t[...]

4 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING   Do not use any unauthorized or aftermarket items to ensure the safety and product life span.   Any damages or injuries by using unauthorized or aftermarket items are not covered by the warranty . CAUTION   The accessories supplied with your product may vary depend[...]

5 ENG ENGLISH ASSEMBLING AND PREP ARING Parts USB LAN DVI IN DVI OUT IN OUT IN RGB/ AV /COMPONENT IN IR IN Connection panel[...]

6 ENG ENGLISH ASSEMBLING AND PREP ARING T o Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).[...]

7 ENG ENGLISH ASSEMBLING AND PREP ARING Correct Method Incorrect Method ST ORAGE METHOD FOR P ANEL PROTECTION Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for . Do not let the panel not to touch the floor . When laying down the product, lay a cushion on a flat floor . Put the produc[...]

8 ENG ENGLISH ASSEMBLING AND PREP ARING   Disconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur .   If you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury .   Do not over tighten the screws as this may cause damage to the monitor [...]

9 ENG ENGLISH ASSEMBLING AND PREP ARING Securing the product to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or p roduct brackets and bolts on the back of the product. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the locatio[...]

10 ENG ENGLISH ASSEMBLING AND PREP ARING IR RECEIVER CONNECTION IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. IR IN IR IN 55L V35A 47L V35A[...]

11 ENG ENGLISH ASSEMBLING AND PREP ARING How to Mount the Set T iling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. <Rear view of the set with the wall mount plate> Screws for attaching the VESA wall mount 47L V35A[...]

12 ENG ENGLISH ASSEMBLING AND PREP ARING 55L V35A Screws for attaching the VESA wall mount 600 400 <Rear view of the set with the wall mount plate>[...]

13 ENG ENGLISH ASSEMBLING AND PREP ARING Set 4 joined to the rest of the sets (2 x 2 tiling) How to Join Sets   The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount (600 x 400).   The load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Eac[...]

14 ENG ENGLISH ASSEMBLING AND PREP ARING 55L V35A Set 4 joined to the rest of the sets (2 x 2 tiling) 1 J oin other sets using screws for xing the VESA wall mount in the same way as above. 2 A fter joining the sets, use the tiling guide to adjust the gap between the sets. 3 Now the 2 x 2 tiling is complete. Y ou can tile in various combinations,[...]

15 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly . T o replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery c[...]

16 ENG ENGLISH REMOTE CONTROL W .BAL Enters the White Balance menu. Navigation Buttons Scrolls through menus or options. S.MENU (SuperSign Menu Key) This button does not apply to this model. EXIT Clears all on-screen displays and returns to Monitor set viewing from any menu. TILE Selects the TILE Mode. INFO ⓘ Displays information about the progra[...]

17 ENG ENGLISH REMOTE CONTROL Displaying the Device Name Connected to an Input Port Display which devices are connected to which external input ports. 1 A ccess the Input list screen and press the red (input label) button on the remote control. 2 Y ou can assign an input label for every input except USB.   External inputs supported : HDMI, DV[...]

18 ENG ENGLISH MAKING CONNECTIONS Connecting to a PC The illustrations may differ from the actual accessories. Some of the cables are not provided. This monitor supports the Plug & Play* feature. * Plug & Play: a feature that enables a PC to recognize devices attached by the user without device conguration or user intervention when power[...]

19 ENG ENGLISH MAKING CONNECTIONS   Use a High Speed HDMI ® /™ Cable.   If you want to use HDMI-PC mode, you must set the input label to PC mode.   When HDMI PC is used, a compatiblity problem could occur .   Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not di[...]

20 ENG ENGLISH MAKING CONNECTIONS IN OUT USB IN LAN DVI IN DVI OUT RGB/ AV IR IN DVI OU T Network /COMPONENT IN HDM I External Device Connection Connect a HD receiver , DVD, or VCR player to the monitor and select an appropriate input mode. The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best p[...]

21 ENG ENGLISH MAKING CONNECTIONS Using the Input List 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK . Input source Description AV W atch video from a VCR or other external devices. Component W atch the content from a DVD or other external devices, or through a digit[...]

22 ENG ENGLISH MAKING CONNECTIONS - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Zoom : This selection will allow you to view the picture without any alteration while filling the entire screen. However , the top and bottom of the picture w[...]

23 ENG ENGLISH ENTERT AINMENT ENTERT AINMENT Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra- tion and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of networks may require the display net- wo[...]

24 ENG ENGLISH ENTERT AINMENT Tips for Network Setting   Use a standard LAN cable with this display . Cat5 or better with a RJ45 connector .   Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the network, quickly power off and/or disconnect the power cab[...]

25 ENG ENGLISH ENTERT AINMENT Tips for Using USB Storage Devices   Only a USB storage device is recognizable.   If the USB storage device is connected through a USB hub, the device is not recog- nizable.   A USB storage device using an automatic recognition programme may not be recog- nized.   A USB storage device which uses[...]

26 ENG ENGLISH ENTERT AINMENT   Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss.   If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adapt[...]

27 ENG ENGLISH ENTERT AINMENT Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK . 3 Press the Search button to go to the Movie List , Photo List or Content List that you want, and press OK . No. Description Returns to the previous level. [...]

28 ENG ENGLISH ENTERT AINMENT T ype Supported file format Movie Codec Media Container Profile Video MPEG1 / MPEG2 DA T , MPG, MPEG, DVD, TS, TP 1080P @ 30 fps MPEG4 (DivX 3.1 1, DivX 4, DivX 5, DivX 6, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10- beta1/2) A VI, DIVX, MP4, MKV , TS, TRP 1080P @ 30 fps H.264 A VI, MP4, MKV , TS, TRP , TP 1080P @ 60 fp[...]

29 ENG ENGLISH ENTERT AINMENT Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Movie List and press OK . 4 Press the navigation buttons to scroll to a folder you want and press OK .[...]

30 ENG ENGLISH ENTERT AINMENT Tips for using playing video files   Some user-created subtitles may not work properly .   Some special characters are not supported in subtitles.   HTML tags are not supported in subtitles.   Subtitles in languages other than the sup- ported languages are not available.   A damaged movie [...]

31 ENG ENGLISH ENTERT AINMENT Video options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Video Play or Set V ideo. and press OK .   The option values changed in Movie List do not affect Photo List .Therefore, they are not affected by option values changed in Photo List .   The option value[...]

32 ENG ENGLISH ENTERT AINMENT Viewing Photos View image files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Photo List and press OK . 4 Press the navigation buttons to scroll to a folder you want and press OK . [...]

33 ENG ENGLISH ENTERT AINMENT Photo options 1 Press SETTINGS to show the Option menus. 2 Press the navigation buttons to scroll to Set Photo View , Set V ideo. and press OK .   The option values changed in Movie List do not affect Photo List .Therefore, they are not affected by option values changed in Photo List .   The option values c[...]

34 ENG ENGLISH ENTERT AINMENT Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager . 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Contents List and press OK . 4 Press the navigation buttons to scro[...]

35 ENG ENGLISH ENTERT AINMENT DivX® VOD Guide DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www .divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to MY ME- DIA and press OK . [...]

36 ENG ENGLISH CUSTOMIZING SETTINGS CUST OMIZING SETTINGS Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . 4 When you are finished, press EXIT . When you retur[...]

37 ENG ENGLISH CUSTOMIZING SETTINGS PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK . 4 When you are finished, press EXIT . When you r[...]

38 ENG ENGLISH CUSTOMIZING SETTINGS Basic image options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the vide[...]

39 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image. (Function works in the following mode - HDMI-DTV) Color Gamut Selects the range of colours that can be expressed. Edge Enhancer Shows clearer and distinctive yet natural edges of the video. Col[...]

40 ENG ENGLISH CUSTOMIZING SETTINGS TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK . 4 When you are finished, press EXIT . When you return [...]

41 ENG ENGLISH CUSTOMIZING SETTINGS OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK . 4 When you are finished, press EXIT . When you ret[...]

42 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Network Setting Configure the network settings. Network Status Display the network status. NETWORK Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK . 3 Press the navigation buttons to scroll to the setting or option you want a[...]

43 ENG ENGLISH CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display . Tile Mode - Natural mode When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7 ID 8 ID 9 3X3 When using 9 [...]

44 ENG ENGLISH CUSTOMIZING SETTINGS Picture ID Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only displays w[...]

45 ENG ENGLISH CUSTOMIZING SETTINGS Daisy Chain Monitors Use this function to share the DVI video signal with other monitors without having to use a separate signal splitter box. • T o use different products connected to each other Connect one end of the signal input cable (DVI Cable) to the DVI OUT connector of product 1 and connect the other en[...]

46 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected?  See if the power cord is properly connected to the outlet. Power is on, but the screen appears extremely dark.  Adjust brightness and contrast again.  Backlight may need repair . Does the Invalid Format message appe[...]

47 ENG ENGLISH TROUBLESHOOTING The screen image looks abnormal. Problem Resolution Is the screen position wrong?  D-Sub analog signal - Press the AUTO button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory , select [PICTURE] - [Screen] - [Position] in OSD [...]

48 ENG ENGLISH TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has poor color resolution (16 colors).  Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color T able menu in Windows. Screen color is unstable or mono-colored.  Check the connection status of the signal cab[...]

49 ENG ENGLISH SPECIFICA TIONS SPECIFICA TIONS LCD Panel Screen T ype 1 19 cm Wide TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size 1 19 cm Pixel Pitch 0.5415 mm (H) X 0.5415 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz HDMI/DVI 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or vide[...]

50 ENG ENGLISH SPECIFICA TIONS LCD Panel Screen T ype 139 cm Wide TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size 139 cm Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz HDMI/DVI 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recomme[...]

51 ENG ENGLISH SPECIFICA TIONS RGB (PC) supported mode Resolution Horizontal Frequency(kHz) V ertical Frequency(Hz) 640 x 480 31.469 59.94 720 x 400 31.468 70.8 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1280 X 960 60 60 1 152 X 864 57.717 59.934 1280 x 1024 63.981 60.02 1920 x 1080 67.5 60 HDMI/DVI (PC) supported mode Re[...]

52 ENG ENGLISH IR CODES Code (Hexa) Function Note 08 Power R/C BUTTON 0B INPUT R/C BUTTON C4 MONITOR ON R/C BUTTON C5 MONITOR OFF R/C BUTTON 95 ENERGY SA VING ( ) R/C BUTT ON DC 3D R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTT ON 32 1/a/A R/C BUTTON 2F CLEAR R/C BUTTON 02 V olume R/C BUTTON 03 V olume R/C BUTTON 79 ARC R/C BUTT ON 99 AUTO R/C BUTT[...]

53 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT CONTROLLING THE MUL TIPLE PRODUCT   Use this method to connect several products to a single PC. Y ou can control several products at one time by connecting them to a single PC.   In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated. Connecting[...]

54 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT Command Reference List COMMAND D ATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k[...]

55 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT   During USB operations such as Dvix or EMF , all commands except Power (k a) and Key (m c) are not executed and treated as NG.   Some commands are not supported depending on the model.   The f f command which shows the status of a certain command does not display the OSD as the res[...]

56 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT T ransmission / Receiving Protocol T ransmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Used for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 ([...]

57 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 01. Power (Command: k a) Controls the power on/off of the set. T ransmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor is fully powered on, the acknowledgement signal is returned properly . * There may be a delay betwe[...]

58 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 07. Brightness (Command: k h) Adjusts the screen brightness. T ransmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. T ransmission [k][k][ ][Set ID][ ][Data][Cr] Data 0[...]

59 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 13. V position (Command: f r) Adjusts the vertical position of the screen. This function is only available when the T ile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available in RGB-PC input mode) T ransmission [f][r][ ][Set ID][ ][Data][Cr] Data 0[...]

60 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 19. V olume (Command: k f) Adjusts the playback volume. T ransmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: V olume 0 to 100 Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. 20. Clock 1 (year/month/day) (Command: f a) Adjusts the Clock 1 (year/mon[...]

61 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 24. Off timer (repeat mode/time) (Command: f e) Configures the off time (repeat mode/time) settings. T ransmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. F1 to F7 (reading data) F1: Read the 1st off timer data F2: Read the 2nd off timer data F3: Read the 3rd off timer data F4: R[...]

62 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 26. On timer input (Command: f u) Adds a new schedule entry by selecting input for the current on timer setting. T ransmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (adding schedule) 60: RGB 90: HDMI (HDMI1) Data1 1. f1h to f7h (reading data) F1: Select the 1st s[...]

63 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 31. Reset (Command: f k) Resets settings for Picture, Screen and Audio or restores factory settings. (Screen reset can only be performed in RGB input mode.) T ransmission [f][k][ ][Set ID][ ][Data][Cr] Data 00: Picture reset 01: Screen reset 02: Initial settings (factory reset) Acknowledgement [k][ ][...]

64 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 42. Power On Delay (Command: f h) T o set the schedule delay when the power is turned on. (Unit: Second) T ransmission [f][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. 0 to max. 100 (sec.) Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 37. White balance red gain (Command: j m) Adjusts the white [...]

65 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 43. Tile Mode (Command: d d) T o set a T ile Mode and T ile Column/ Row values. T ransmission [d][d][ ][Set ID][ ][Data][Cr] Data 00 to FF: 1st byte - T ile Row 2nd byte - T ile Column *00, 01, 10, 1 1 means Tile Mode Of f ** It may not be supported depending on the model. Acknowledgement [d][ ][Set [...]

66 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 49. Tile V Size (Command: d h) T o adjust the T ile V ertical size. *Set T ile V Position to 0x00 before setting T ile V Size. * This function is available only when the Natural option of the T ile Mode is set to Off while the T ile Mode set to On. T ransmission [d][h][ ][Set ID][ ][Data][Cr] Data 00[...]

Make sur e to read the Saf et y Precautions bef ore using the pr oduct. K eep the Owner's Manual ( CD) in an acces sible place f or future r ef erence. The model and serial numbers of the SET ar e located on the back and one side of the SET . R ecord it belo w should you ever need service. MODEL SERIAL T emporary noise is normal when powering [...]