LG Electronics 98UB9800 инструкция обслуживания

Click! User Guide O WNER’S MANU AL LED T V * * L G LED TV s are L CD TV s with LED backlighting. Please read this manual car efully befor e operating your T V and re tain it for future ref erence. 98UB9800 98UB98 10 105UC9 *MFL67987277* P /NO : MFL679 87277 (1412-REV04) www .lg.com[...]

2 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS IMPORT ANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. W ARNING / CAUTION RISK OF ELECTRIC SHOCK DO NO T OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. R[...]

3 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufa[...]

4 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS • Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electricia[...]

5 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS • Do not use high voltage electrical equipment near the TV, (e.g. bug zapper). This may result in product malfunction. • Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it. • Dot Defect The panel is a high technology product with re[...]

6 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS For USA and Canada F CC NO TICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate[...]

7 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS Viewing 3D Imaging W ARNING Viewing Envir onment • Viewing Time - When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a pho tosensitive seizure or chr onic illness • Some users [...]

8 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS CA UTION Viewing Envir onment • Viewing Distance - Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV. Viewing Age • Infants / Children - Usage/ Viewing 3D content for children under th[...]

9 ENGLISH LICENSES / OPEN SOURCE SOFTW ARE NOTICE INF ORMA TION LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com . OPEN SOURCE SOFTW ARE NO TICE INF ORMA TION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://op[...]

10 ENGLISH T ABLE OF CONTENTS T ABLE OF CONTENTS 2 IMPORT ANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging 9 LICENSES 9 OPEN SOURCE SOFTW ARE NO TICE INFORMA TION 10 T ABLE OF CONTENTS 11 INST ALL A TION PROCEDURE 11 ASSEMBLING AND PREP ARING 11 Unpacking 13 Optional Extras 14 Parts and Buttons 15 - Using the Joystick Butt on 16 Lifting and Moving the [...]

11 ENGLISH INST ALLA TION PROCEDURE / A SSEMBLING AND PREP ARING INST ALL A TION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connec[...]

12 ENGLISH ASSEMBLING AND PREP ARING 12 ASSEMBLING AND PREP ARING Owner’s Manual Magic Remote, Batteries (AA) (See pages 35 and 36.) Cinema 3D Glasses The number of 3D glasses may differ depending upon the model or country. (Depending upon model) (For 98UB9800, 98UB9810) (For 98UB9800, 98UB9810) 1 2 Power Cord (Depending upon model) Stand Base (S[...]

13 ENGLISH ASSEMBLING AND PREP ARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. AG-F*** Cinema 3D Gl[...]

14 ENGLISH ASSEMBLING AND PREP ARING Parts and Butt ons 1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2. Joystick button is located below the screen of TV. • Do not place any objects or body parts in area between TV Screen and Speaker Stand assembly. It could cause personal Injury or damage[...]

15 ENGLISH ASSEMBLING AND PREP ARING Using the Joystick Butt on You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the TV is turned off, place your finger on the joystick button, press it once , and release it. Power Off When the TV is turned on, place your finger on the joys[...]

16 ENGLISH ASSEMBLING AND PREP ARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not place the product on the fl[...]

17 ENGLISH ASSEMBLING AND PREP ARING Setting Up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. • When attaching the stand to the TV set, place the [...]

18 ENGLISH ASSEMBLING AND PREP ARING Mounting on a T able 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. • Do not place the TV near or on sources of heat, as this may result i[...]

19 ENGLISH ASSEMBLING AND PREP ARING Mounting on a W all (F or 98UB9 810) An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall per[...]

20 ENGLISH ASSEMBLING AND PREP ARING Tidying Cable s (F or 98UB9 800, 98UB98 10) Gather and bind the cables with the Cable Holder and Cable management. Cable Management Cable Holder Cable Management (F or 105UC9) Gather and bind the cables with the Cable management. Cable Management • Do not move the TV by holding the cable holder and cable manag[...]

21 ENGLISH ASSEMBLING AND PREP ARING (F or 105UC9) 1 2 1 2 1 A V Port Cov er 2 1 Cover Holder 2 • If you do not attach the cover holder, the cover may fall off and cause injury. CA UTION Using Sliding Speaker (F or 98UB9 800, 98UB98 10) Sliding Speaker 1 W hen TV is turned ON, the hidden Speaker slides out from inside the TV. 2 Go to (Home)  ([...]

22 ENGLISH ASSEMBLING AND PREP ARING Using Built-In Camera You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. • Before using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the[...]

23 ENGLISH ASSEMBLING AND PREP ARING Preparing Built -In Camera 1 Pull up the built-in camera at the back of the TV. Angle Adjustment Le ver Slide • Remove the protective film before using the built-in camera. NO TE 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the built-in camera. [Side View] 3˚ 5˚ 5˚[...]

24 ENGLISH MAKING CONNE CTIONS MAKING CONNE CTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each dev[...]

25 ENGLISH MAKING CONNE CTIONS Connecting to an HD R eceiver , DVD Play er , or VCR Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode. • HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting. • The HDMI IN 3 port is especially suitable f[...]

26 ENGLISH MAKING CONNE CTIONS D VI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. • When using the HDMI/DVI cable, only single link is supported. NO [...]

27 ENGLISH MAKING CONNE CTIONS Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. • Connect the mobile phone to the HDMI (4K @ 60 Hz) / DVI IN 4 (MHL) port to view the phone screen on the TV. • This only works with an MHL-enabled pho[...]

28 ENGLISH MAKING CONNE CTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. • If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.[...]

29 ENGLISH MAKING CONNE CTIONS Composite C onnection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. • If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. • Check to ens[...]

30 ENGLISH MAKING CONNE CTIONS Connecting to a PC • Use an HDMI connection for the best image quality. • Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. • In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC o[...]

31 ENGLISH MAKING CONNE CTIONS Method B: DVI t o HDMI Connection AUDIO OUT DVI OUT (*Not pro vided) (*Not pro vided) PC[...]

32 ENGLISH MAKING CONNE CTIONS Connecting to an Audio Sy stem You can use an optional external audio system instead of the built-in speaker. Digital Optical A udio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.[...]

33 ENGLISH MAKING CONNE CTIONS Connecting Headphones Listening to sound with headphones. • Do not use headsets (earphones) at high volume or for a long time. It may cause damage to your hearing. • AUDIO menu options are disabled when headphones are connected. • When changing AV MODE with a headphone connected, the change is applied to video b[...]

34 ENGLISH MAKING CONNE CTIONS Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV. • Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. • Connecting guide for USB 3.0 : Some [...]

35 ENGLISH MAGIC REMO TE FUNCTIONS MA GIC REMO TE FUNCTIONS When the message Magic remote battery is low. Change the battery . is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Failure to match the correct [...]

36 ENGLISH MAGIC REMO TE FUNCTIONS (F or 105UC9) P VOL CH (POWER) Turns the TV on or off. Wheel (OK) Press the center of the Wheel button to select a menu. You can change channels by using the Wheel button. (EXIT to LIVE) Switches among broadcast (antenna) and various inputs. Color buttons These access special functions in some menus. ( : Red, : Gr[...]

37 ENGLISH MAGIC REMO TE FUNCTIONS Regis tering Magic Remot e The Magic Remote operates by pairing with your TV. How to r egister the Magic Remot e (Wheel) To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.[...]

38 ENGLISH USING THE USER GUIDE USING THE USER GUIDE User Guide allows you to easily access detailed TV information. 1 Press (Home) button to access the Home menu. 2 Select User Guide and press the Wheel (OK) button. [...]

39 ENGLISH SPECIFIC A TIONS SPE CIFICA TIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 120 V ~ 50 / 60 Hz Television System ATSC, NTSC-M, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 External Antenna Impedance 75 Ω Environment con[...]

40 ENGLISH SPECIFIC A TIONS / EXTERNAL CONTROL DEVICE SETUP Wireless module (LGSWF41) Specifications Standard IEEE 802.11a/b/g/n/ac Frequency range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Output power(Max.) 802.11a: 11.5 dBm 802.11b: 14.5 dBm 802.11g: 16.5 dBm 802.11n - 2.4 GHz: 16.5 dBm 802.11n - 5 GHz: 14.5 dBm 802.11ac - 5 GHz : 14.[...]

41 ENGLISH MAINTENANCE / TROUBLESHOO TING MAINTENANCE Cleaning Y our TV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. • Before cleaning, turn the power off and disconnect the power cord and all other cables. • When the TV is left unattended or unused for a long time, disconnect the power cord fro[...]

THE CONSUMER ELECTRONICS INDUSTR Y CARES • Manuf acturers, r etailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjo yable. • As you enjoy your television, please note that all televisions – new and old- must be suppor ted on proper stands or installed according to the manufacturer?[...]

THE CONSUMER ELECTRONICS INDUSTR Y CARES • Manuf acturers, r etailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjo yable. • As you enjoy your television, please note that all televisions – new and old- must be suppor ted on proper stands or installed according to the manufacturer?[...]

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center F or inquires or comments, visit ww w .lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product[...]

OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. ww w .lg.com[...]

2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 V olume + R/C Button 60 PIP(AD) R/C Button 03 V olume - R/C Button 61 Blue R/C Button 06 > (Arrow Key / Right Key) [...]

3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV . Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally . Note: The type of control port on the TV can be [...]

4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack T ype • Y ou need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV , which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV . USB IN (TV) (PC ) (PC ) RS-232C IN (CON[...]

5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DA T A (Hexadecimal) COMMAND1 CO[...]

6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP T ransmission / Receiving Protocol T ransmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV . (j, k, m or x) [Command 2] : Second command to control the TV . [Set ID] : Y ou can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjust[...]

7 ENG ENGLISH 7 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) ► T o control Power *On or Off of the set. T ransmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ► T o Show TV is Power On or *Off T ransmission [k][[...]

8 ENG ENGLISH 8 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ► T o adjust the screen tint. Y ou can also adjust tint in the PICTURE menu. T ransmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k [...]

9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ► T o reduce the power consumption of the TV . Y ou can also adjust Energy Saving in PICTURE menu. T ran[...]

10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) T wo bytes are available for each major and minor channel data, but usually the low byte is [...]

1 1 ENG ENGLISH 1 1 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► T o select input source for main picture. T ransmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 02 : Satellite DTV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 1 1 : CA TV 01 : CADTV 10 : A TV 20 : A V or A V1 21 : A V2 40 [...]

12 ENG ENGLISH 12 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► T o adjust picture position and minimize image shaking automatically . It works only in RGB (PC) mode. T ransmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : T o set Ack [u][ ][Set ID][ ][OK/NG][Data][x][...]