LG Electronics W2753VC инструкция обслуживания

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. S ee the label attached on the product and give the information to your dealer when you ask for service. W2753V C User ’ s Guide[...]

A1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the pow[...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

Important Precautions A3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching.[...]

A4 Connecting the Display Disassembling the stand 1. Place the monitor face down on the cushion or soft cloth. 2. Loosen the screw which is attached to the stand base, then take off the stand base from stand body. Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not[...]

A5 A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~15˚ Ergonomic It is recommended that in order to maintain an ergonomic an[...]

A6 A6 Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form to . 1 2 Connecting the Display Wall-outlet type Headphone/Earphone Input Power Cord A B C D Connect DVI-D Cable Connect D-sub Cable (PC) Connect D-sub Cable (Mac) Connect HDMI Cable Mac adapter For Apple Macintosh use, a separate [...]

A7 Connecting the Display O PE N 1 2 3 4 E P O N N O PE Using the cable holder (This feature is not available in all models.) Cable holder[...]

A8 Control Panel Functions Control Function MENU Button Use this button to enter or exit from the On Screen Display. DSUB and DVI input,use this button to enter EZ ZOOMING , 4:3 IN WIDE , PHOTO EFFECT items. HDMI input,use this button to enter 4:3 IN WIDE , PHOTO EFFECT , VOLUME items. For more information,refer to page A17 -A18 . OSD LOCKED/UNLOCK[...]

A9 Control Panel Functions This Indicator lights up as red when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. Use this button to turn the display on or off. Power Button Power Indicator Use this button to select an icon in the On Screen Display. AUTO/SET Button [...]

A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Scr een Display Control system. A short example is given below to familiarize you with the use of the contr ols. The following section is an outline of the available ad[...]

A11 NOTE The order of icons may differ depending on the model (A11~A20). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Scr een Display control, adjustment, and setting menus. ● : Adjustable A : DSUB Input * : only for DSUB/DVI Input D : DVI Input ** : only for HDMI Input H : HDMI Input To adjust the reso[...]

A12 On Screen Display(OSD) Selection and Adjustment Sub-menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Y ou wer e introduced to the pr ocedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press [...]

A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. You ca[...]

A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of cha[...]

A15 Restore all factory default settings except "LANGUAGE." Press the , buttons to reset immediately. On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be [...]

On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the button on the front of the monitor. Main menu Description MENU : Exit , : Move, SET : Select CINEMA MODE To focus on the moving picture selected. This function adjusts the brightness of areas other than the user-selected area to provide an environment and [...]

A17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description EZ ZOOMING The OSD screen will appear when you touch the button on the left bottom of the monitor. EZ Zoom lowers the display’s resolution in single-step increments. Depressing the button once lowers the resolution by one step; while a second button-press returns t[...]

A18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description VOLUME To adjust the volume of headphone/Earphone. (Only for HDMI input) SET SET PHOTO EFFECT • NORMAL : The PhotoEffect function is disabled. • GAUSSIAN BLUR : This option is to add the effect to the screen that the dark and sharp image becomes brighter and more[...]

A19 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description The OSD screen will appear when you touch the button on the left bottom of the monitor. DSUB/DVI input HDMI input DSUB/DVI input HDMI input MOVIE Select this when you are watching a video or movie. INTERNET GAME Select this when you are [...]

A20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description DSUB/DVI input HDMI input DEMO SPORTS This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. Select this whe[...]

A21 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator flickering? ● Do you see an "OUT OF RANGE" message on the screen[...]

A22 A22 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the resu[...]

T roubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver f[...]

A 2 4 A 2 4 A 2 4 Specifications W2753V C NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Range Power Input Environmental Conditions Stand Base Power cord 27.0 inches (68.6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating V[...]

A 2 5 Specifications Indicator On Mode Sleep Mode Off Mode Red Flicker Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) * Recommend Mode DSUB/DVI Timing Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 480P 576P 720P 720P 1080i 1080i 1080P 1080P 3[...]

Digitally yours[...]