LG W2294T-PF инструкция обслуживания

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. S ee the label attached on the product and give the information to your dealer when you ask for service. W2294T User ’ s Guide[...]

1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the powe[...]

2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh[...]

3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1 . Place the monitor face down on the cushion or soft cloth. 3 . Attach the monitor to the stand base by turning the screw to the right. 4 . Once assembled take the monito[...]

4 Connecting the Display IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 5 . Turn the screw to the left to separate the stand body from the stan[...]

5 Connecting the Display Wall-outlet type Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. DVI (This feature is not available in all countries.) 4. Touch the power button in front to turn on the monitor. The 'S[...]

Connecting the Display T o attach or separate the back door 1 . To attach the back door, match the two holes and push the back door as shown in the image. back door NOTE - Cover the back cap after connecting the cables before use. (To connect the cable, see page 5 for reference.) 2 . To separate the back door, hold the bottom part and pull it out. [...]

7 Control Panel Functions Front Panel Controls Use this button to enter EZ ZOOMING , 4:3 IN WIDE , PHOTO EFFECT items. For more information, refer to page 11. MENU Button Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inad[...]

8 Control Panel Functions Use this button to turn the display on or off. The power indicator stays blue if the display is running properly (On mode). If the display is in power saving mode, the power indicator is flickering blue. Power Button/ Power Indicator Use this button to enter a selection in the On Screen Display. AUTO/SET Button AUTO IMAGE [...]

9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Contr ol system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjus[...]

10 NOTE The order of icons may differ depending on the model (10~16). OSD (On Screen Display) menu languages on the monitor may differ from the manual. On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu A D Reference EZ ZOOMING 4:3 IN WID[...]

11 Pressing the button on the right side of the monitor will display the OSD screen. Main menu Description EZ ZOOMING To select the display resolution. When you select 'EZ ZOOMING' in OSD, display resolution goes one step down so characters and images look bigger. When you select EZ ZOOMING once again, it goes back to the original resolut[...]

12 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Sub-menus Menu Name Icons Main Menu Button Ti[...]

13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU : Exit : Decrease : Increase SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50 On the monitor, high gamma values display whitish i[...]

14 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the imag[...]

15 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. SETUP + MENU : Exit : Adjust : Adjust SET : Select another sub-menu Main menu Sub menu Description WHITE BALANCE NO R T C ON POWER INDICA TOR ON FACT ORY RESET NO To choose the language in which the control names are displayed. To adjust position of the OSD[...]

16 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description MOVIE INTERN ET NORMAL DEMO USER When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied screen will appear on the right side. Press the SET button [...]

17 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue or green? ● Is the power indicator amber or flickerin[...]

18 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results a[...]

19 T roubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the drive[...]

20 Specifications Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Range Power Input AC-DC Adapter Environmental Conditions Stand Base Power cord 21.995 inches (55.8673 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8673 cm 0.282 x 0.282 mm pixel pitch Horizontal Fr[...]

21 Specifications Preset Modes (Resolution) *Recommend Mode Indicator On Mode Sleep Mode Off Mode Blue Blue Flickering Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x [...]

Digitally yours[...]