M-Audio OXYGEN 8 инструкция обслуживания

User Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Oxygen 8 Featur es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Oxygen 8 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 What’ s in the Box . . . . . . . . .[...]

Introduction Congratulations on your pur chase of the Oxygen 8, par t of the USB K eystation series of MIDI controllers br ought to y ou by M-Audio .Y ou ma y use your Oxygen 8 in conjunction with a USB equipped PC or Macintosh computer and a ppr opriate music softwar e to enter a full range of MIDI note and controller information. Y ou will be abl[...]

Contained within the Oxygen 8 is a USB MIDI interface. Simply plug the Oxygen 8 into your computer’ s USB por t, install the included drivers and enable the MIDI interface within your m usic software. This combination of a versatile ke yboard controller and a USB MIDI interface allo ws you r ecord and contr ol MIDI information within y our music [...]

Guide to Getting Started Here’ s an outline of steps to begin using your Oxygen 8 on either Mac or PC: 1. Attach the Oxygen 8 to your computer (see “Hardwar e Installation”). 2. Install the Driver (see “Software Installation”). 3. Hook your sound module to the Oxygen 8 (see “Setting Up Y our MIDI Studio”). 4. Configure the Oxygen 8 in[...]

To v erify your Windows installation after you ha v e carefull y follow ed these instructions, you ma y check y our system’ s “Device Manager , ” located in the Control Panel under “System. ” If you look in the Device Manager , y ou will find 2 parts for the Oxygen 8 KEYST A TION driv er ; one under the “Universal Serial Bus” controll[...]

7. Y ou will see a “New Har dware found” dialog. (If you don’ t see this dialog at first, unplug y our Oxygen 8 and tr y again.) Click Next. 8. Y ou will see another warning that the product has not passed Windows logo testing. Click "Continue an ywa y". 9. The installer will finish. Click “Finish” to continue. 10. Y ou will see[...]

11. Again, the computer reminds y ou that the product has not passed Windows Logo testing. Click "Continue anywa y". 12. The driv er has been installed. Windows XP Installation is now complete. W indows 2000 1. Ser vice Pack 2 or higher is r equir ed for pr oper operation of the Oxygen 8 driver . This service pack is available fr om Micr [...]

The installer will scan your har d drive (this can tak e some time) and will then install the necessar y files and perform setup actions on your system. A series of progr ess bars will show y ou how the pr ocess is going. 6. At the next prompt, the installer will warn you that this product does not ha ve a Windows Digital Signature. Click “Y es?[...]

10. The installer will warn y ou again, a second time , that this product does not ha ve a Windows Digital Signature - again, click “Y es. ” 11. The next scr een informs you that the installer has completed. Click “Finish” to continue. 12. Windows 2000 will prompt y ou to r estar t the computer , in order to complete the installation. Click[...]

click “Next” to continue. The installer will scan your har d drive (this can tak e some time) and will then install the necessar y files and perform setup actions on your system. A series of progr ess bars will show y ou how the pr ocess is going. 5. A dialog box will appear , stating that the installation has succeeded. Click “Finish” to c[...]

system OS 9.2.2 or higher . Some updates ar e offer ed free to Apple owners. Please check the Apple website at http://www .info .apple.com for update information. OMS is a MIDI manager program that is made b y Opcode. W e hav e included it on the CD disk for y our conv enience , and also offer it as a fr ee download fr om our website’ s MIDISPOR [...]

First Time OMS Configuration Instructions If you ha v e installed the Oxygen 8 in Mac OS 9, it is now time to configur e OMS (this is not necessar y in Mac OS X). Go to the Chooser under the Apple Menu, and mak e sur e AppleT alk is turned off (this is recommended, although OMS will sense that it is on and prompt y ou to turn it off). If you ar e i[...]

1. The Oxygen 8 is connected to the computer via the USB port connectors, using the supplied USB standard cable. 2. The Oxygen 8 can pla y the synthesizer that is part of an internal sound card, as well as an y softwar e synthesizers that are installed in y our system.This will depend on how y ou set up your softwar e (see section “Using the Oxyg[...]

Using the Oxygen 8 in your Application Software Once the Oxygen 8 driver has been installed, y ou will need to configure y our MIDI application softwar e to utilize the Oxygen 8. The manner in which this is done varies between a pplications, so we can just cov er the basics her e . Generally with both the Mac and PC, most MIDI applications hav e a [...]

1. Po wer up the Oxygen 8, using either a 9vDC adapter or using 6 AA batteries. Set the pow er switch to the the 9V/Batter y setting. If a 9V pow er adapter is present, the Oxygen 8 will use power fr om the adapter . If a 9V adapter is not present, and the Oxygen 8 has the requir ed battery power , the unit will pow er up using the batteries. 2. Ma[...]

manuals of y our devices for inf ormation on how to change the Pitch Bend range. T o bend the pitch up, mov e the wheel a wa y from y ou. T o bend the pitch down, move the wheel towar ds you. 2. Using the Modulation Wheel: It is very common to use the modulation wheel to change the intensity of effects, such as Vibrato (pitch change), T remolo (cha[...]

F or example, if you want to change the value of the velocity offset, first press the MIDI/SELECT button and then the velocity k e y . Second, change the data entr y slider to the value you want. Finally , press the MIDI/SELECT button again to finish the change. To assign an y MIDI control value to the data slider: 1. Pree the MIDI/Select button 2.[...]

“Flat” & “Sharp” keys: By pr essing the MIDI/SELECT button and the flat or the sharp k ey , you will shift the activ e k e yboar d pitch one note (half-step) higher , or low er . For example, if you want to change the pitch 2 notes do wn, press MIDI/SELECT button and the “flat” key twice. Pr ess the MIDI/SELECT button to finish the [...]

Rear Panel 1. Sustain jack: This jack allows you to connect an optional foots witch to the ke yboard. When the footswitch is depr essed, notes play ed on the k eyboard will continuously sound as long as the f ootswitch is held, while MIDI controller inf ormation is sent from the Oxygen 8. 2. MIDI Out jack, “K e yboar d”:This standard MIDI jack [...]

20 Specifications Model: Oxygen 8 Keyboard T ype 25 dynamic key Simultaneous Output 10 note (reverse priority) Control Switches MIDI Channel Reset Octave -2, -1, center , +1, +2 Program Change CC-00/CC-32 (GS Bank Selection) CC-No. (Generic CC Assignment) CC-Data Data Entry V elocity Assignment Data Entry Reverb Send Level Assignment Data Entry Cho[...]

T echnical Support & Contact Information F or additional technical assistance, contact M-Audio T echnical Suppor t by telephone (626-445-8495, 9-5 PST M-F), by fax (626-445-7564) or by e-mail (techsupt@m-audio .com). If you ha v e questions, comments or suggestions about this product, or any M-Audio product, we invite y ou to contact us dir ect[...]

Appendix A-Midi Charts MIDI Controllers: Number Definition Parameter 0 Bank Select 0-127 1 Modulation Wheel 0-127 2 Breath Control 0-127 3U ndefined 0-127 4F oot Controller 0-127 5P ortamento Time 0-127 6D ata Entry 0-127 7C hannel Volume 0-127 8 Balance 0-127 9U ndefined 0-127 10 Pan 0-127 11 Expression Controller 0-127 12 Effect Control 1 0-127 1[...]

MIDI Implementation: Model: Oxygen 8 V ersion: 1.0 Function T ransmitted Recognized Remarks Basic Channel Default 1 x Changed 1-16 x Mode Default Mode 3 x Messages x x Altered ************* x Note Number 12-108 x With Octave Change T rue V oice ************* x V elocity Note ON o x Note OFF x x After T ouch Key’s x x Ch’s x x Pitch Bender o x C[...]

Oxygen 8 W arranty Information M-Audio warrants that this pr oduct is free of def ects in materials and w orkmanship under normal conditions f or 90 da ys, so long as the pr oduct is: o wned by the original pur chaser ; the original purchaser has pr oof of pur chase from an authorized M-Audio dealer; and the purchaser has r egistered his/her o wner[...]