Makita 6311DW инструкция обслуживания

Equipped with Electric Brake MODEL 6311D MODEL 6311DW With Fast Charger Capacities No load speed IRPMl Dimensions 1L x W x HI Steel 1 Wood I Wood screw I Machine screw I Hiqh I tow INSTRUCTION MANUAL Net weight 13" 1112") 24" 6.4mmx55mm 6mm11,4,,) op ,,150 o-370 244mmx79mmx233mm 1.95kg 115116"l 1114" x 2-3/16") 19-518&[...]

IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. ~~~~ 1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. 2. CONSIDER WORK AREA ENVIRON[...]

KEYLESS CHUCK SYSTEM This cordless driver drill is now equipped with a”&&‘ Keyless Chuck system. This Keyless Chuck features a click locking mechanism to reduce loosening of the bit from vibration, in addition to making the bit faster and easier to install. Below are the instructions for using the “New“ keyless chuck. This sheet sup[...]

This tool contains 12V High Capacity Battery 1201 and Charger DC1201. CAUTION - To reduce risk of injury, charge only appropriate MAKITA Ni-Cd batteries. Other types of batteries may burst causing personal injury and damage. This insert page supersedes Page 6 and Page 12 from the enclosed instruction manual. Charging Your new battery cartridge is n[...]

ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Bits I Size I Part No. Phillips 3J%-fzE& Sl[...]

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in. 16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cord[...]

IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord FOR CHARGER & 25 50 100 150 18 18 18 16 BATTERY CARTRIDGE I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, ([...]

ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents. 4. Always cover the battery terminals with the batte[...]

Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal or the battery cartridge. .To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. .To insert the battery cartridge, align the tongue on the battery cartridge with th[...]

installing or removing driver bit or drill bit CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before instaliing or removing the bit. Hold the ring and turn the sleeve counter- clockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockw[...]

Speed change To change the speed, slide the speed change lever to the "H" side for high speed or "L" side for low speed. To slide the speed change lever easily, pull the trigger slightly while pushing the speed change lever. Be sure that the speed change lever is set to the correct position before operation. Use the right speed [...]

NOTE : 0 Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged. 3.5 (9164") 3.8 (5132") 4.5 111164"l When driving wood screws, predrill pilot Nominal diameter of I Recommended size 2.2 - 2.5 (3132'' - 3/32") 2.5 - 2.8 (3132'' - 7/64',) 2.9 - 3.2 (716[...]

Hook A hook is provided as a standard equip- ment. This hook is convenient for tem- porarily hanging the tool. To install the hook, first insert one end of the hook into one slot in the tool body and then insert the other end into the other slot. Secure the hook with the screw. The hook can be installed on either left or right side of the tool. 10[...]

MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 11[...]

ACCESSORIES CAUTION: These accessories or attachments are'recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. -3 1: Slotted Bit I Size I Part NO. #3 784[...]

CORDLESS DRIVER DRILL Model 6311D Note: The switch and other part conftgurations may differ from country to country. 13[...]

$:! DESCRIPTION ';,',M ,& DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ~ 1 7 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 - Name Plate Tapping Screw PT4x18 Housing Set IWifh Item 591 Pan Head Screw M4x22 Wth Washer1 Sponge 14-72 Switch Lever Switch Lever Keyless[...]

/ p Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. N i-Cd To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b). Take the battery to your nearest Makita Authorized Service Center or [...]