Marantz AV7701 инструкция обслуживания

Owner’ s Man ual A V Pr e T uner A V770 1 Basic version Adv anced version Infor mation DVD[...]

I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence [...]

II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do[...]

1 Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ·······················································[...]

2 Features Current feedback amplifier This unit uses a high-speed current feedback amplifier circuit for its preamplifier so that signals from a Blu-ray Disc player and other equipment that support high-definition audio formats can be amplified with high fidelity. The high-speed current feedback amplifier also reproduces a natural sound spac[...]

3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the[...]

Basic version 4 F Connections v page5 F Setup v page29 F Playback (Basic operation) v page36 F Selecting a listening mode (Sound Mode) v page77 Basic version Here, we explain the connections and basic operation methods for this unit. Basic version Adv anced version Infor mation Basic version DVD[...]

5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible device If your video device does not support HDMI con[...]

6 Important information Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). This function automatically converts various formats of video signals input to [...]

7 Important information G Flow of video signals for ZONE2 H HDMI connector HDMI signal HDMI signal Component video signal Component video signal Video signal Video signal Video connector HDMI-compatible TV HDMI-incompatible TV HDMI connector Component video connectors Component video connectors Component video connectors Component video connectors [...]

8 Connecting an HDMI-compatible device You can connect up to ten HDMI-compatible devices (7-inputs/3-outputs) to the unit. When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 – 6 IN connector in ZONE2 ( v page100 ). If the device connected to this unit is equipped w[...]

9 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this u[...]

10 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 – 6 IN connector in ZONE2 ( v page100 ). Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC[...]

11 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder (Primary) • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color or 4K, please use a “High Speed HDMI cable” or “High Speed HDMI cable with[...]

12 Connecting an HDMI-compatible device n Deep Color ( v page166 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page116 , 166 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color ( v page166 , 16[...]

13 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page8 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support HDMI connections. Connection methods for vari[...]

14 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital audio signals from TV can be transm[...]

15 a a s a s R L R L VIDEO AUDIO OUT VIDEO OUT COAXIAL OPTIC AL OUT COMPONENT VIDEO Y P B P R OUT AUDIO R L OUT Satellite tuner/Cable TV or or or Connecting a set-top box (Satellite tuner/cable TV) This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see[...]

16 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting to this unit. Use e[...]

17 Connecting an HDMI-incompatible device Connecting a Blu-ray Disc player This section describes how to connect when your Blu-ray disc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting t[...]

18 Connecting an HDMI-incompatible device Connecting a digital camcorder This section describes how to connect when your digital camcorder does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting to th[...]

19 Connecting an HDMI-incompatible device Connecting a media player This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting to this unit. U[...]

20 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 39 ) or “Playing a USB memory device” ( v page42 ). Cables used for connections To connect an iPod to this unit, use the USB cable supplied [...]

21 Connecting an HDMI-incompatible device Connecting a CD player You can enjoy CD sound. n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality i[...]

22 Connecting an HDMI-incompatible device Connecting a record player You can enjoy playing records. n Audio connection The following methods are available for connecting to this unit. a AUDIO IN (PHONO) connector This makes an analog audio connection. • This unit is compatible with record players with an MM cartridge. When you connect to a rec[...]

23 Connecting an HDMI-incompatible device Connecting an HDRadio receiver • By connecting a HDRadio antenna to this unit, you can receive HDRadio programs. • HDRadio broadcasting currently is available in the United States and select other countries. • After connecting the antenna and receiving a broadcast signal ( v page?[...]

24 Connecting a wireless receiver (RX101) • You can connect a wireless receiver (RX101, sold separately) to play back music on your Bluetooth device with this unit. • To do this, switch the input source to “M-XPort” ( v page36 “Selecting the input source”). • This unit supports the A2DP standard of the Bluetooth profile. [...]

25 Connecting a device with a multi-channel output connector • You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. • To play analog signals input from 7.1CH IN connectors, set “Input Mode” ( v page124 ) to “7.1CH IN”. • The video signal can be c[...]

26 Power amp • Connect a power amp (sold separately) to the PRE OUT terminal of this unit. • This unit has an UNBALANCED PRE OUT terminal and BALANCED PRE OUT terminal. Connect to the correct terminal for your power amp. • Connect the speakers to the power amp. • For details on speaker connections, see the User Guide for the pow[...]

27 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and music servers • Playback of music from [...]

28 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection cables. Doing so can result i[...]

29 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions[...]

30 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct[...]

31 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey ® Setup) 5 Select “Start” and then press ENTER . A udy ss ey S et up Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV preamp. 6 Select “Next” and then press ENTER . The subwoofer volume setting screen is displayed.[...]

32 Calculation Set up speakers (Audyssey ® Setup) 11 Repeat step 10, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. Audyssey Setup Repeat Last Test Calculation Measurements finished. 12 Select “Calculation” and then press ENTER . Measuring results are analyzed, and[...]

33 Set up speakers (Audyssey ® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”. • Saving the results requires about 10 seconds. • During s[...]

34 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey ® Setup again. • If the result still differs from the actual co[...]

35 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . A udy ss ey S et up Channel Select Parameter Check Start Your AV receiver can automatically measure the acoustics of your room then optimize your speaker[...]

36 Playback (Basic operation) Setup ( v page29 ) n Turning the power on ( v page36 ) n Selecting the input source ( v page36 ) n Adjusting the master volume ( v page37 ) n Turning off the sound temporarily ( v page37 ) n Playing a Blu-ray Disc player/DVD player ( v page37 ) n Playing Super Audio CD ( v page37 ) n Playing a CD p[...]

37 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page112 ). n When the “Scale” setting ( v page112 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page112 ) is “–79.5dB – 18.0dB” G Adju[...]

38 Playing a CD player The following describes the procedure for playing CD player. 1 Prepare for playback. q Turn on the power of the subwoofer and player. w Load the disc in the player. 2 Press ON/STANDBY X to turn on power to the unit. 3 Press CD to switch the input source to “CD”. 4 Play the CD player. Basic version Adv anced version Infor [...]

39 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v page20 ). Listening to music on an iPod T[...]

40 Playing an iPod n Setting “Remote Mode” (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Remote Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. 2 Press OPTION . The option menu scre[...]

41 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Remote Mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Repeat Option Random Operation Mode 3 Use o p to select repeat playback mode. OPT[...]

42 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FA[...]

43 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 20 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p . 4 Use ui to select the [...]

44 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and rel[...]

45 Listening to HDRadio stations For antenna connections, see “Connecting an HDRadio receiver” ( v page23 ). Important information n Using the HDRadio™ receiver HD Radio stations offer higher sound quality than conventional FM/ AM broadcasts. It is also possible to receive data services and select broadcasts from among up to ei[...]

46 Listening to HDRadio stations Listening to HDRadio stations 1 Press TUNER to switch the input source to “HD Radio”. G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION HD Radio CH 1 FM 87.50MHz Now Playing Tune Preset Option G Display of this unit H 01 FM 87.50MHz 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select ?[...]

47 Listening to HDRadio stations n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM/AM broadcasts. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Tune Mode”, then press ENTER . G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION[...]

48 Listening to HDRadio stations n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER . The direct tuner screen is[...]

49 Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press TUNER to switch the input source to “HD Radio”. 2 Pres[...]

50 Listening to HDRadio stations n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Mem[...]

51 n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Name”, then press ENTER . The Pres[...]

52 Listening to HDRadio stations n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press TUNER to switch the input source to “HD R[...]

53 Listening to HDRadio stations Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION HD Radio CH 1 FM 87.50MHz Now Playing Tune Preset Opt[...]

54 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable broadcast station types H Supported file types I[...]

55 Listening to internet radio n Adjusting the sound quality (M-DAX) Make this setting at “M-DAX” ( v page111 ) in the menu. You can use the “M-DAX” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Off”. n Switching the s[...]

56 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet ra[...]

57 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network [...]

58 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after ch[...]

59 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LAN)”). w If settings are required, make the “Setti[...]

60 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching content with keywords (Text Search) ( v page71 ) [...]

61 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page62 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you [...]

62 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LA[...]

63 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the number of user comments or number of times they[...]

64 Using online services Listening to Pandora ® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page132 ). e Complete step 4 and obtain a Pandora account. • If you already have a Pandor[...]

65 Using online services n Creating a new station You can create up to 100 radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New Station Quick Mix D&M1 Radio 2 Input a track or artist name, then press O K . BACK New Station Input Select Cancel Track or Artist A N 0 $ B O 1 % C P 2 [...]

66 Using online services n Giving Feedback and Managing Stations You can personalize your stations by providing feedback. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this track I don’t like this track Why is this track playing? Create station Bookmark this artist Bookmark this track I’m tired of thi[...]

67 Using online services Listening to SiriusXM Internet Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “C[...]

68 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . BACK SiriusXM [1/20] Pop Rock Dance/Electronic Hip-Hop/R&B Country Chirisitan Jazz/Standards Sign Out Exit Are you sure you[...]

69 Using online services Listening to Spotify Introduce your marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com 1 Prepare for playback. q Check the network environment, then turn on this unit[...]

70 Using online services 9 Menu items on playback screen. [1/3] Star this track Browse albums by “Artist name” Browse tracks on “Album name” Track-Artist Back Star this track Adds a star to the selected track. Browse albums by “Artist name” Displays the list of albums by the artist of the track that is being played back. Browse tracks o[...]

71 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page71 ) n Performing repeat playback (Repeat) ( v page72 ) n Perfor[...]

72 Convenient functions Performing repeat playback (Repeat) USB Media Server Spotify 1 While content is playing, press OPTION . The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION USB Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back MP3 128kbps Repeat Option Random Picture View 3 [...]

73 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorite Memory) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 Wh[...]

74 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Spotify Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu screen is displayed. 4 Use ui to sele[...]

75 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod touch, or iPad directly to the unit If you update[...]

76 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check “Allow iTunes c[...]

77 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music. This unit supports playback of almost all of these multi-chan[...]

78 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” ( v page109 ) to enjoy your favorite sound mode. Operation button Input signal Listening mode 2-channel z 1 STEREO AUTO[...]

79 Selecting a listening mode Operation button Input signal Listening mode DTS-HD / DTS Express DTS-HD HI RES / DTS-HD HI RES A-DSX z 5 DTS-HD MSTR / DTS-HD MSTR A-DSX z 5 DTS Express / DTS Express A-DSX z 5 DTS-HD + NEO:6 DTS-HD + PL g x Music DTS-HD + PL g z PCM/DSD multi-channel MULTI CH IN / MULTI CH IN A-DSX z 5 MULTI CH IN 7.1 MULTI IN + Dolb[...]

80 Selecting a listening mode Operation button Input signal Listening mode All DIRECT PURE DIRECT AUTO z 2 z 1 2-channel also includes analog input. z 2 When AUTO mode is selected, the sound mode that is compatible with the input signal is used for playback. z 3 This mode plays back 2-channel source in 5.1 or 7.1-channel playback. It cannot be sele[...]

81 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel. By adding the surround back channel, a str[...]

82 Selecting a listening mode Audyssey DSX listening mode Listening mode type Description Audyssey DSX (A-DSX) z This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front high channels, the surround sound effects sound more three dimensional and realistic. z This can be select[...]

Advanced version 83 F Installation/connection/setup of speakers (Advanced) v page84 F Connections (Advanced connection) v page90 F Playback (Advanced operation) v page92 F Playback in ZONE2/ZONE3 (Separate room) v page100 F How to make detailed settings v page103 F Operating external devices with the remote control v page140 Advan[...]

84 Procedure for speaker settings Install Connect ( v page86 ) Set up speakers ( v page88 ) Install Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. This unit is compatible with Audyssey DSX ?[...]

85 Install When 7.1-channel speakers are installed using surround back, front height, and front wide speakers When using Audyssey DSX ® , install front wide speakers or front height speakers. When using Dolby Pro Logic g z, install front height speakers. FHR FHL FL FR SL SR FWL FWR C SBL SBR SW z 1 z 2 z 3 z 5 z 4 Listening position z 1 22˚ – 3[...]

86 Connect n Example of connections to marantz MM7055 and MM7025 power amp 7.1-channel (Surround back / Front height / Front wide speaker) connection FL FR C SBL SBR SL SR SW FWR FWL FHR FHL BALANCED UNBALANCED G MM7025 H G MM7025 H G MM7025 H G MM7055 H 6.1-channel (Surround back speaker) connection If you are using just one surround back speaker,[...]

87 Connect 5.1-channel connection FL FR C SL SR SW BALANCED UNBALANCED G MM7055 H 2.1-channel connection FL FR SW BALANCED UNBALANCED G MM7025 H n For connecting four subwoofers Four subwoofers can be connected to this unit. The same signal is output from each subwoofer terminal. Basic version Adv anced version Infor mation Adv anced version DVD[...]

88 1 Set up the remote control unit n Set up the zone mode Press ZONE SELECT to switch “MAIN”. Press ZONE SELECT NOTE When using a remote control with preset codes registered ( v page 143 ), press AVR to set the remote control to the AVR- operation mode before operation. 2 Connect the setup microphone. Audyssey Setup Channel Select Start You[...]

89 Set up speakers 7 Use o p to set whether or not a front height channel is measured, and then press ENTER . Measure Set to measure the front height speakers. Skip Set when you do not want to measure the front height speakers. 8 Use o p to set whether or not a front wide channel is measured, and then press ENTER . Measure Set to measure the front [...]

90 Connections (Advanced connection) Connecting the REMOTE CONTROL connectors Performing operations on this unit and external devices • You can connect an IR receiver to this unit to perform operations on this unit and external devices with the supplied remote control unit. • To do this, disable the remote control signal receiving functio[...]

91 Connecting an external control device RS-232C connector When you connect an external control device, you can control this unit with the external control device (such as power supply operation, volume adjustment, and input source switching). External serial controller Perform the operation below beforehand. q Turn on the power of this unit. w Tur[...]

92 Setup ( v page29 ) Playback (Basic operation) ( v page36 ) Selecting a listening mode (Sound Mode) ( v page77 ) Connections (Advanced connection) ( v page90 ) n HDMI control function ( v page92 ) n Sleep timer function ( v page94 ) n Web control function ( v page95 ) n Dual backup memory function ( v page97 ) n Panel lock[...]

93 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Control” ( v page117 ) set to “On”? • Is “Power Off Control” ( v page117 ) set to “All” or “Video”? • Is “Control Mon[...]

94 Sleep timer function • You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. • The sleep timer function can be set for each zone ( v page 102 “Sleep timer function”). (The MAIN ZONE setting method is explained here.) 1 Press ZONE S[...]

95 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 27 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be a[...]

96 Web control function 6 Operate. G Example 1 H MAIN ZONE control screen ZONE CONTROL NETWORK iPod/USB HD Radio RELOAD Add To Your Favorite Top Menu MAIN ZONE SLEEP marantz AV7701 CBL/SAT FAVORITE STATION STEREO CBL/SAT DVD GAME AUX-1 AUX-2 MEDIA PLAYER HD Radio CD PHONO NETWORK iPod/USB M-XPort Blu-ray TV AUDIO Internet Radio 1 2 3 4 MOVIE DIRECT[...]

97 Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. X ON/ST ANDBY BACK ui ENTER n Disabling all key button operations 1 Press X ON/STANDBY while you press and hold BACK and ENTER with the unit in standby mode. 2 Press ui to select “FP/VOL LOCK ON”. 3 Press ENTER to en[...]

98 Panel lock function n Canceling the Panel lock function 1 Press X ON/STANDBY while you press and hold BACK and ENTER with the unit in standby mode. 2 Press ui to select “FP LOCK z Off”. ( z The currently set mode.) 3 Press ENTER to enter the setting. The Panel lock function is canceled. Even when the Panel lock function is set, you can opera[...]

99 Various memory functions Personal memory plus function This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ ® XT, Dynamic EQ, audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for the individual sound modes. L[...]

10 0 Playback in ZONE2/ZONE3 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZON[...]

101 Video output Video Connection The video signals of this unit’s ZONE2 video output connector are played by the ZONE2 TV. VIDEO IN HDMI IN CONPONENT VIDEO IN MAIN ZONE ZONE2 This unit or or TV When “Component Video Out” ( v page 119 ) in the menu is set to “ZONE2”, the component video output connector outputs the ZONE2 video. NOTE Th[...]

10 2 Playback 1 Press ZONE SELECT to switch “ZONE2” or “ZONE3”. Input source select buttons 2 Press ON/STANDBY X to turn on the ZONE2 or ZONE3 power. • Also press input source select button when in standby mode, the power turns on. • When ON/STANDBY X is pressed, ZONE2 or ZONE3 turns off. • Power in ZONE2 or ZONE3 can be turn[...]

10 3 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed settings Setting items Detailed items Descriptio[...]

10 4 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 135 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 135 ZONE3 Setup Makes settings for audio playback in a ZONE3 system. 135 Zone Rename Change the display title of each zone to one you prefer. 136 T[...]

10 5 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio [1/2] Surround Parameter Tone Dialogue Level Subwoofer Level M-DAX Audio Delay Volume Audyssey Adjust surround sound parameters q Currently selected setup icon w List of GUI menu setup icons e Currently selected setup ite[...]

10 6 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w *SETUP MENU Audio w q Press SETUP to display the menu screen. w TV screen: Display[...]

10 7 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page71 ) • Preset Name ( v page51 ) • Source Rename ( v page123 ) • Friendly Name ( v page131 ) • Zone Rename ( v page136 ) • Character input for the network [...]

10 8 Audio Make audio-related settings. Menu operation 1 Press ZONE SELECT to switch “MAIN”. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the m[...]

10 9 Setting items Setting details Low Frequency Effects Adjust the low-frequency effects level (LFE). n When “Input Mode” ( v page124 ) is set other than to “7.1CH IN” –10dB – 0dB n When “Input Mode” ( v page124 ) is set to “7.1CH IN” 0dB / +5dB / +10dB / +15dB For proper playback of the different sources, we recommend se[...]

11 0 Tone Default settings are underlined. Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “On” and “Off”. On : Allow tone adjustment (bass, treble). Off : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ” ( v page113 ) is set to “Off[...]

111 M-DAX Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near those of the origin[...]

11 2 Audio Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 116 ) is set to “On” and when a TV compatible with Auto Lip Sync is connected. • Store ?[...]

11 3 Audio Setting items Setting details Dynamic EQ Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. On : Use Dynamic EQ. Off : Do not use Dynamic EQ. • is displayed when set to “On”. • This can also be set by pressing DYNAMIC E[...]

11 4 Audio Setting items Setting details Stage Height Adjust sound stage height when using front height speakers. –10 – +10 (0) • “Audyssey DSX ® ” can be set when you are using front height speakers or front wide speakers. • “Audyssey DSX ® ” is only valid when using a center speaker. • “Audyssey DSX ® ” is valid [...]

11 5 Video Make video-related settings. NOTE When HDMI ZONE2 function is used, these settings are not available. Menu operation 1 Press ZONE SELECT to switch “MAIN”. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous[...]

11 6 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments. • This item can be set when the input source is CBL/SAT DVD Blu-ray[...]

11 7 Video Setting items Setting details Video Output Make settings for HDMI monitor output. Auto (Dual) : The presence of a TV connected to the HDMI MONITOR 1 or HDMI MONITOR 2 connector is detected automatically, and that TV connection is used. Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always used. Video is not output from the[...]

11 8 Video Output Settings Default settings are underlined. Makes screen-related settings. z “Blu-ray”, “GAME”, “AUX2”, “TV AUDIO” or “CD” can be set when “HDMI” or “COMP” ( v page122 , 123 ) has been assigned. “Output Settings” can not be set when 4K signals are input. Setting items Setting details Video Mode Mak[...]

11 9 Video Setting items Setting details Progressive Mode Set an appropriate progressive conversion mode for the source video signal. CBL/SAT DVD Blu-ray z GAME z AUX1 AUX2 z MEDIA PLAYER CD z TV AUDIO z Auto : The video signal is automatically detected and the appropriate mode is set. Video : Select mode suitable for video playback. Video and Film[...]

12 0 Video Audio Display Default settings are underlined. Sets how long each menu is displayed when the input source is “NETWORK”, “iPod/USB”, or “HD Radio”. Setting items Setting details Audio Always : Show display continuously. 30s : Show display for 30 seconds after operation. 10s : Show display for 10 seconds after operation. Off[...]

12 1 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press ZONE SELECT to switch “MAIN”. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the s[...]

12 2 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 : Assign an HDMI input connector to the selected input source. None : Do not assign an HDMI input connector to th[...]

12 3 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO COAX 1 / COAX 2 / OPT 1 / OPT 2 : Assign a digital input connector to the selected input source. None : Do not assign a digital input connector to the selected input so[...]

12 4 Inputs Hide Sources Default settings are underlined. Remove from the display input sources that are not used. Setting details CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / HD Radio / NETWORK / TV AUDIO / M-XPort / PHONO : Select input source that is not used. • Show : Use this source. • Hide : Do no[...]

12 5 Inputs Video Source Default settings are underlined. Video of another input source is played back combined with the playing audio. Setting details Default : Play the picture and sound of the input source. CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / TV AUDIO / CD : Select video input source to view. The video of the selected i[...]

12 6 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page112 ). • Can be used without changing the settings. Please set if necessary. Menu operat[...]

12 7 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page112[...]

12 8 Setting items Setting details Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Set Defaults : The “Distance[...]

12 9 Speakers Setting items Setting details Levels Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / F. Height L / Center / F. Height R / Front R / F. Wide R / Surround R / Surr.Back R z / Surr.Back L z / Surround L / F. Wide L / Subwoofer : Select speaker [...]

13 0 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setti[...]

13 1 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Off In Standby : Suspend network function during standby. Always On : Ne[...]

13 2 Network Settings Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings Maintenance Mode Selects how configure the network settings q Network/Settings DHCP IP Address Subnet Mask Default Gat[...]

13 3 Network Setting details n Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Network Information IP Control Friendly Name Settings Maintenance Mode Selects how co[...]

13 4 General Make various other settings. Menu operation 1 Press ZONE SELECT to switch “MAIN”. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the[...]

13 5 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s STATUS and[...]

13 6 Zone Rename Change the display title of each zone to one you prefer. Setting details MAIN ZONE / ZONE2 / ZONE3 • Up to 10 characters can be input. • For character input, see page107 . Trigger Out 1 / Trigger Out 2 Selects when to activate trigger out. For details about how to connect the DC OUT jacks, see “DC OUT jacks” ( v pa[...]

13 7 Information Show information about receiver settings, input signals, etc. NOTE This item is not compatible with the HDMI ZONE2 function. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presen[...]

13 8 General Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network after doing a firmware update, conn[...]

13 9 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page130 ). Upgrade Package : Display the items to be upgrade[...]

14 0 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers. n Buttons used for operating the devices q DEVICE X For switching power of each device on or off. w uio p , ENTER , BACK For menu operati[...]

14 1 Registering preset codes Check the registered preset code 1 Press and hold the input source select buttons for the appliance to control, and press SET until indicator blinks twice. The back light flashes. 2 Press INFO . The indicator blinks twice, after which the set code is shown for 3 seconds in the remote control display. n Remote control [...]

14 2 Registering preset codes n Devices that can be registered to input source select buttons on the remote control The types of devices that can be registered to each input source select button on this remote control are assigned as shown in the following table. Register the preset code under the desired device name in “List of preset codes” ([...]

14 3 Operating external devices Press the input source select button ( v page 36 ). • The operation mode of the remote control unit is switched as shown in the table. Input source select button Input source of this unit Operation mode Devices controllable with the remote control unit – This unit (AVR-operation) z 2 z 1 CBL/SAT Device registe[...]

14 4 Operating external devices The supplied remote control unit can control a device other than this unit. 1 Press the input source select button to which the preset code for the device you want to operate has been registered ( v page 143 ). 2 Operate the device. • For details, refer to the device’s operating instructions. n TV group (1 zzz[...]

14 5 Operating external devices n CD group (3 zzz ) (CD player / CD recorder) operation Operation buttons Function DEVICE X Power on/off DEVICE MENU Menu TV X TV power on/standby TV INPUT Switch TV input ENTER Enter 3 Pause 1 Playback 2 Stop 8 9 Auto search (cue) 6 7 Manual search (fast-reverse/fast-forward) 0 – 9 Track selection n CBL/SAT group [...]

14 6 Operating learn function • If the AV device is not a marantz device, or if the device does not operate even when the preset code is registered, use the learning function. Remote codes for different devices can be remembered for use by the marantz remote control included with this device. • This remote control unit is capable of learn[...]

14 7 Delete saved remote control codes Codes can be erased in three ways: by buttons, sources, and by all memory contents. n Delete remote control codes for each button 1 Press and hold SET until the LEARN indicator blinks. 2 Press input source select buttons to select the input source you want to delete. The input source is shown in the remote con[...]

14 8 Setting the back light Press the Light button on the side of the remote control, and the buttons on the remote control light for 2 seconds. If the Light button is pressed while the buttons are lit, the buttons remain lit for another 2 seconds. • Backlight is set on in the factory settings. Disabling the backlight Press and hold both SET a[...]

Information 14 9 F Part names and functions v page150 F Other information v page157 F Troubleshooting v page169 F Specifications v page174 F Index v page175 Informations Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced version Infor mation Infor mation DVD[...]

15 0 Front panel For buttons not explained here, see the page indicated in parentheses ( ). u t y r q w e q STANDBY indicator ································································· ( 36 ) G STANDBY indicator status H • Power on : Off • Normal standby : Red • [...]

15 1 Front panel With the door open For buttons not explained here, see the page indicated in parentheses ( ). Q2 Q1 u y o Q4 Q3 i Q0 Q5 Q6 Q7 Q8 Q9 W0 W1 W2 W3 t q w e r q Headphones jack (PHONES) When the headphones are plugged into this jack, audio will no longer be output from the PRE OUT terminals. NOTE To prevent hearing loss, do not raise th[...]

15 2 Display Main Display The input source name, surround mode, setting values and other information are displayed here. n Standard display w e q q Light illumination When the power to this device is switched on, the surrounding area is lit blue. The settings can be changed so the light does not switch on ( v page 99 “Switches light illuminati[...]

15 3 Display Sub Display t y r u i o Q0 Q1 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Output signal channel indicators Lights when audio signals are being output from the PRE OUT terminals. e Master volume indicator r MUTE indicator This lights when the mute mode is sele[...]

15 4 Rear panel See the page indicated in parentheses ( ). o q t e r y i u Q5 Q0 Q6 Q3 Q4 Q1 Q7 Q2 w q FM/AM antenna terminal (ANTENNA) ·································· ( 23 ) w Analog audio connectors (ANALOG AUDIO IN/ANALOG AUDIO OUT) ······································?[...]

15 5 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e t y u o Q1 Q2 Q3 Q4 Q5 i Q0 Q7 Q8 W2 Q6 W0 Q9 W4 W3 W3 W1 r q w e q Display q LEARN indicator w Information display e indicator w AVR button ······································· ( 141 , 143 ) e SET butt[...]

15 6 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with ne[...]

15 7 Other information n Trademark information ( v page157 ) n Surround ( v page158 ) n Relationship between video signals and monitor output ( v page164 ) n Explanation of terms ( v page166 ) Trademark information This product uses the following technologies (Random order): Manufactured under license from Audyssey Laboratories™. U.S.[...]

15 8 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode[...]

15 9 Surround Sound Mode ( v page77 ) Surround Parameter ( v page109 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 10 This item cannot be selected during DSD (SA-CD signal playback. z 11 This item can be selected when a Dolby TrueHD signal is played. z 12 This item can be selected when a [...]

16 0 Surround Sound Mode ( v page77 ) Subwoofer ( v page111 ) Tone z 18 ( v page110 ) Audyssey ( v page112 ) M-DAX z 21 ( v page111 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 5 Only when “Subwoofer Mode” is set to “LFE+Main” ( v page128 ), sound is output from the s[...]

16 1 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Sound Mode ( v page77 ) NOT[...]

16 2 Surround Sound Mode ( v page77 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag[...]

16 3 Surround Sound Mode ( v page77 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag[...]

16 4 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO On A A A A A A Only the menu is displayed A A On A A S S <VIDEO> S <VIDEO> S (VIDEO) A (VIDEO) On ASA S <COMPONENT> S <C[...]

16 5 Video signal resolution conversion table When “Video Conversion” ( v page118 ) is set to “On”, “i/p Scaler” ( v page 118 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output ( v page6 “Converting input video[...]

16 6 Explanation of terms A A2DP A2DP is one profile of Bluetooth definded for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay[...]

16 7 Downmix This function converts the number of channels of surround audio to less number of channels and plays back. DTS This is an abbreviation of Digital Theater System, which is a digital audio system developed by DTS. When playing back audio by connecting this system with a device such as DTS amplifier, accurate sound field position and re[...]

16 8 P Pairing Pairing is an operation required for settings to connect two Bluetooth devices. Pairing enables Bluetooth devices to access each other. Progressive (sequential scanning) This is a scanning system of video signal that displays 1 frame of video as one image. Compared to the interlace system, this system provides images with less flick[...]

16 9 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf[...]

17 0 Symptom Cause/Solution Page When the HDMI ZONE2 function is used, no video or audio is output to TV in ZONE2. • Make sure that the power is on for ZONE2. • Check the input source for ZONE2. • Check the output settings (resolution/audio format) for the input device 102 102 – When playing back the input device just to use the HD[...]

17 1 Symptom Cause/Solution Page No sound is produced from subwoofer. • Check the subwoofer connections. • Turn on the subwoofer’s power. • Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. • If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is se[...]

17 2 Symptom Cause/Solution Page Internet radio cannot be played. • Ethernet cable is not properly connected or network is disconnected. Check the connection status. • Program is being broadcast in non-compatible format. Only Internet radio programs in MP3 and WMA can be played on this unit. • The firewall of the PC or router has be[...]

17 3 Symptom Cause/Solution Page When using AirPlay with the iPhone/ iPod touch/iPad, the sound suffers from intermittent breaks or AirPlay does not function. • Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using AirPlay. • When playing via a wireless connection, outside conditions may affect [...]

1 74 Specifications n Audio section • Analog Input sensitivity/Input impedance: 200 mV/47 kΩ Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode) S/N: 105 dB (IHF–A weighted, DIRECT mode) Distortion: 0.005 % (20 Hz – 20 kHz) (DIRECT mode) Rated output: Unbalanced pre-output: 1.2 V Balanced pre-output: 2.4 V • Digital [...]

17 5 v Numerics 2.1-channel ························································· 87 3D ······································································· 12 5.1-channel ·····················?[...]

176 v M Maintenance Mode ·········································· 133 MAIN ZONE ····················································· 167 Manual Setup ···················································[...]

17 7 AV R M marantz 0000 TV group (1 zzz ) A Acer 1141 Acer 1141 Admiral 1009, 1089, 1002 Aiko 1059 Aiwa 1117, 1118 Aiwa 1117 Aiwa 1118 Akai 1001 Amtron 1023 Anam 1113 Anam National 1023, 1069, 1092 AOC 1003, 1049, 1024, 1127 Audiovox 1023 B Bell & Howell 1009, 1025 Benq 1142 Benq 1104, 1142 Broksonic 1097, 1098, 1113, 1003 Broksonic 1098 Broks[...]

17 8 T T oshiba 2004, 2026, 2028, 2008 T oshiba 2028 T oshiba 2026 Y Y amaha 2046 Y amaha 2060 Z Zenith 2010 Zenith 2010 CD group (3 zzz ) A AIW A 3001, 3002, 3003 AKAI 3004, 3005, 3006 AUDIO 3007 AUDIO LABS 3008 C CALIFORNIA 3008 CARVER 3010, 3011, 3009 CASIO 3012, 3020 CURTIS 3020, 3012 D DENON 3013 E EMERSON 3014 F FISHER 3011, 3015, 3016, 3017,[...]

LICENSE License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. n Boost http://www.boost.org/ Boost Software License - Version 1.0 - August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompany[...]

LICENSE 9. Termination. a. This License and the rights granted hereunder will terminate automatically upon any breac h by Y ou of any term of this License. Individuals or entities who hav e received Deriv ative Works from Y ou under this License, how ev er , will not hav e their licenses terminated provided suc h individuals or entities remain in f[...]

LICENSE 3. The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY[...]

Dimensions Unit : in. (mm) 14 7/32 (361.0) 15 21/64 (389.3) 10 33/64 (267.0) 2 9/64 (54.5) 1 9/16 (39.5) 37/64 (14.5) 6 23/32 (170.5) 7 9/32 (185.0) 17 21/64 (440.0) 13 25/64 (340.0) 2 13/64 (56.0) 1 31/32 (50.0) 1 31/32 (50.0) 21/32 (16.5) 15/32 (11.8) Weight : 21 lbs 9 oz (9.8 kg) Basic version Adv anced version Infor mation Infor mation DVD[...]

D&M Holdings Inc. 3520 10192 00AM V00[...]