Marantz PD4220V инструкция обслуживания

Model PD4220V User Guide Plasma Monitor[...]

Introduction to the Plasma Monitor Marantz’ s Plasma Monitor is a seamless blend of cutting- edge visual technology and sophisticated design. At each inch, with a 16:9 aspect ratio, the Plasma Monitor certainly makes a big impression. However , the monitor ’ s sleek techno-art lines blend in well with your environment. Marantz Plasma Monitor ?[...]

Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user th[...]

T o avoid damage and prolong operating life: 1 . Use only with 120V 50/60Hz AC power supply . Continued operation at line voltages greater than 120 V olts AC will shorten the life of the unit, and might even cause a fire hazard. 2. Handle the unit carefully when installing it and do not drop. 3. Set the unit away from heat, excessive dust, and dire[...]

Pr é cautions V euillez lire avec attention ce manuel avant d ’ utiliser le moniteur à plasma et le conserver accessible pour s ’ y r é f é rer ult é rieurement. A TTENTION RISQUE D ’ ELECTROCUTION NE P AS OUVRIR MISE EN GARDE: A F I N D E REDUIRE LES RISQUES D’ELECTRO-CUTION, NE P AS DEPOSER LE COUVERCLE, IL N’Y A AUCUNE PIECE UTILI[...]

Pour é viter des dommages et prolonger la dur é e de service de l ’ appareil: 1. N ’ utiliser qu ’ une source d ’ alimentation de 120 V 50/ 60 Hz CA. Le fait d ’ utiliser l ’ appareil en continu à des tensions de ligne sup é rieures à 120 V olts CA r é duit sa dur é e de vie et risque de provoquer un incendie. 2 . Manipuler l ’[...]

How to Attach Options to the Plasma Monitor .... 1 V entilation Requirements for enclosure mounting .......... 1 How to use the safety metal fittings and the screws for safety metal fittings ................................................. 1 Part Names and Function .................................. 2 Front View ...................................[...]

1 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") Y ou can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around th[...]

2 q Power T urns the monitor ’ s power on and off. w Remote sensor window Receives the signals from the remote control. e POWER/ST ANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. * POWER/ST ANDBY letter is printed on model PD6140 and PD5040 only . r INPUT SELEC[...]

3 Rear View/ T erminal Board A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity . Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker ?[...]

4 → VIDEO1 → VIDEO2 → VIDEO3 RGB /PC DVD / HD VIDEO POSITION / CONTROL MENU /ENTER POINTER ZOOM OFF TIMER EXIT VOLUME MUTE WIDE DISPLAY MULTI SELECT AUTO ADJUST ID SELECT CLEAR POWER ON STANDBY Remote Control q POWER ON/ST ANDBY Switches the power on/standby . (This does not operate when POWER/ST ANDBY indicator of the main unit is off.) w RG[...]

5 Battery Installation and Replacement Insert the 2 “ AAA ” batteries, making sure to set them in with the proper polarity . 1. Press and open the cover . 2. Align the batteries according to the (+) and ( – ) indication inside the case. 3.Replace the cover . !5 MUL TI Not functional for the models covered in this manual. !6 SELECT Not functio[...]

6 POWER/STANDBY Appro x. 7m / 23ft Using the wired remote control mode Connect the remote cable* to the remote control ’ s remote jack and the “ REMOTE IN ” terminal on the monitor . When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be opera[...]

7 Installation VIDEO ( IN/OU T ) VIDEO 1 VIDEO 2 VIDEO 3 AUDIO 1 DVD 1 / HD 1 R ( MONO ) L Y Cb/P b Cr/Pr RGB 2 / DVD 2 / HD 2 RGB 1 R/ VD G/ B/ HD ( I N / OUT ) DV I ( Digital RGB ) AUDIO 2 R ( MONO ) L AUDIO 3 R ( MONO ) L Cr /P r Y Cb/Pb RGB 3 External Control IN OUT REMOTE VCR or Laser Disc Player Document Camera VIDEO 1- 3 DVD Player IBM VGA o[...]

8 Connecting Y our PC or Macintosh Computer Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer ’ s screen image for an impressive presentation. The plasma monitor supports the signals described on page 7 of Model Information. T o connect a PC, Macintosh or compatible graphics adapter , simply:[...]

9 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 Pin Assignments and Signal Levels for 15 pin RGB (Analog) Pin Configuration and Signal of the RGB 3 Connector (DVI Connector) The unit is equipped with a type of connector commonly used for digital. (This cannot be used for an analog input.) (TMDS can be used for one link only .) Signal (Analog) Red Green or sy[...]

10 Note: 1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT . When LOOP OUT is ON, do not connect an OUTPUT signal fr om another unit, that will place an extraor dinary load on the other unit and may damage it. 2. LOOP OUT can not be turned ON while signals ar e input to RGB1 terminal. 3. LOOP OUT can be turned ON while signals[...]

11 Basic Operations POWER T o turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the Power button (on the unit). The monitor ’ s POWER/ST ANDBY indicator turns red and the standby mode is set. 3. Press the POWER ON button (on the remote control) to turn on the unit. The monitor ’ s POWER/ST ANDBY indicator[...]

12 OFF TIMER T o set the off timer: The off timer can be set to turn the power of f after 30, 60, 90 or 120 minutes. 1. Press the OFF TIMER button to start the timer at 30 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns of f. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 T o check the remaining [...]

13 Wide Screen Operation (manual) W ith this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → FULL → ST ADIUM → ZOOM → 2.35:1 → 14:9 When a 720P[...]

14 FULL size screen The image is expanded in the horizontal and vertical direction. ZOOM size screen When wide signals are input. TRUE The image is true resolution. FULL Information  Supported resolution See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor .  “PICTUR[...]

15 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen ’ s mode, the OSM may be displayed differently . In the explanation, the OSM section is shown close up. MAIN MENU 1 / 2 MENU/ENTER EXIT PICTURE AUDIO IMAGE ADJUST OPTION1 ADV ANCED OSM NEXT PA GE : OFF SEL. EXIT OK The foll[...]

16 Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE CONTRAST  ←→  YES 18 BRIGHTNESS  ←→  YES 18 SHARPNESS  ←→  YES 18 COLOR  ←→  YES 18 TINT  ←→  YES 18 PICTURE MODE BRIGHT/NORMAL/THEA T .1/THEA T .2/DEFAUL T YES 18 NR OFF/NR-1/NR-2/NR-3 YES 19 COLOR TEMP LOW/MID LOW/MID/H[...]

17 *1 Only when AUTO PICTURE is OFF *2 RGB/PC only *3 The default value is PC for model PD4220V . *4 The default value is LOW for model PD4220V . Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE OPTION2 PWR. MGT . OFF ←→ ON YES 26 CINEMA MODE OFF ←→ ON YES 27 LONG LIFE PLE AUTO/LOCK 1/LOCK 2/LOCK 3 YES 27 ORBITER AUTO 1 Y[...]

18 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “ PICTURE ” screen appears. 2. Use the ▲ and ▼ buttons to select “ CONTRAST ” . PICTURE 1 / 2 E[...]

19 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor . Example: Setting “ NR-3 ” 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “ PICTURE ” screen appears. 2. Use the ▲ and ▼ buttons to sele[...]

20 Changing the Gamma Curve This feature adjusts the brightness of the midtone areas while keeping shadows and highlights unchanged. Example: Setting “ 3 ” Set “ ADV ANCED OSM ” to “ ON ” in the MAIN MENU (1/2), then perform the following operations. 1. On the MAIN MENU, select “ PICTURE ” , then press the MENU/ENTER button. The “[...]

21 Adjusting the colors Use this procedure to adjust hue and color density for red, green, blue, yellow , magenta and cyan. Y ou can accentuate the green color of trees, the blue of the sky , etc. Example: Adjusting the color tune for blue Set “ ADV ANCED OSM ” to “ ON ” in the MAIN MENU (1/2), then perform the following operations. 1. On t[...]

22 Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting “ AUDIO INPUT1 ” to “ VIDEO 2 ” 1. On the MAIN MENU, select “ AUDIO ” , then press the MENU/ENTER button. The “ AUDIO ” screen appears. 2. Use the ▲ and ▼ buttons to select “ AUDIO INPUT1 ” . 3. T[...]

23 Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: T urning the DISPLA Y OSM of f 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” menu appears. 2. Use the ▲ and ▼ buttons to select “ OSM ” , then[...]

24 Setting the BNC connectors Select whether to set the input of the 5 BNC connectors to RGB and component. Example: Set the BNC INPUT mode to “ COMP . ” 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” screen appears. 2. Use the ▲ and ▼ buttons to select “ BNC INPUT ” . 3. T o set the [...]

25 Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the “ 1080B ” mode to “ 1035I ” 1. On the MAIN MENU, select “ OPTION1 ” , then press the MENU/ENTER button. The “ OPTION1 ” screen appears. [...]

26 Resetting to the default values Use these operations to restore all the settings (PICTURE, AUDIO, IMAGE ADJUST , OPTION1~3, etc) to the factory default values. Refer to page 16 for items to be r eset. 1. On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button. The “OPTION1” screen appears. 2. Use the ▲ and ▼ buttons to s[...]

27 Power management mode On Off T urning the picture back on Picture already on. Operate the keyboard or mouse. The picture reappears. POWER/ ST ANDBY indicator Green Red Power management operating status Not activated. Activated. Description Horizontal and vertical synchronizing signals are present from the computer . Horizontal and/or vertical sy[...]

28 ORBITER Use this to set the picture shift. Example: Setting “ ORBITER ” to “ AUTO1 ” Perform Steps 1-2 of LONG LIFE, then... 3. Use the ▲ and ▼ buttons to select “ ORBITER ” . 4. Use the 䊴 and 䊳 buttons to select “ AUT O1 ” . The mode switches as follows each time the 䊴 or 䊳 button is pressed: → OFF ↔ AUTO1 ↔ AU[...]

29 Setting the time for INVERSE/WHITE Set a time duration. Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half. Perform Steps 1-3 of INVERSE, then... 4. Use the 䊴 and 䊳 buttons to select “ ON ” , then press the MENU/ENTER button. THE “ INVERSE/WHITE ” screen appears. 5. Adjust the time using [...]

30 Information 䡵 Setting the time WORKING TIME ..... Set the time duration for “ SCREEN WIPER ” . When the WORKING TIME is set to “ ON ” the mode will stay on. W AITING TIME ...... Set the standby time until the “ SCREEN WIPER ” mode starts. SPEED ................ Set the moving speed for the “ SCREEN WIPER ” . The speed decreases[...]

31 Setting the picture size for RGB input signals Use this procedure to switch the setting to “ ON ” or “ OFF ” . Example: Setting the “ PICTURE SIZE ” mode to “ OFF ” Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION2 ” , then press the M[...]

32 Option3 Settings Menu Using the timer This function sets the monitor to turn ON/OFF automatically at a set time. Set “ADV ANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button. The “OPTION3” screen appears. 2. Use the ▲ and ▼ [...]

33 FUNCTION ............. Set the LONG LIFE function. 䡵 T o reset the program Align the cursor with the DA TE field that you wish to reset, then press the CLEAR button. 䡵 T o reset the data Align the cursor with the field (ON/OFF/INPUT/ FUNCTION) that you wish to reset, then press the CLEAR button. 䡵 Special characters in the PROGRAM TIMER sc[...]

34 Information 䡵 PWR. ON MODE settings LAST ................ Last mode (the mode that was last selected at the time the power was switched off). VIDEO1, 2, 3 .... VIDEO input mode. RGB1, 2, 3 ....... RGB input mode. HD/DVD1, 2 ..... HD/DVD input mode. 䡵 Restoring the factory default settings Select “ ALL RESET ” under the OPTION1 menu. Note[...]

35 Loop Out setting When this feature is set to ON, the received signal will be looped out. Example: Setting “ ON ” Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION3 ” , then press the MENU/ENTER button. The “ OPTION3 ” screen appears. 2. Use the[...]

36 Video W all setting Use this feature to configure a 2 × 2 or 3 × 3 video wall. Set “ ADV ANCED OSM ” to “ ON ” in the main menu (1/ 2), then perform the following operations. 1. On the MAIN MENU, select “ OPTION3 ” , then press the MENU/ENTER button. The “ OPTION3 ” screen appears. 2. Use the ▲ and ▼ buttons to select “ V[...]

37 AUTO ID This feature automatically sets the ID numbers of multiple displays connected to each other . Example: Setting “ ON ” Set the ID number for the No. 1 display on ID NUMBER menu. Perform Steps 1-2 of VIDEO W ALL, then... 3. Use the ▲ and ▼ buttons to select “ AUTO ID ” . 4. Use the 䊴 and 䊳 buttons to select “ ON ” , the[...]

38 P . ON DELA Y (Power on delay) Use this function to activate power-on delay . T urn on the AUTO ID before the following operations. Example: Setting “ ON ” Perform Steps 1-2 of VIDEO W ALL, then... 3. Use the ▲ and ▼ buttons to select “ P . ON DELA Y ” . 4. Use the 䊴 and 䊳 buttons to select “ ON ” . The mode switches as follo[...]

39 REPEA T TIMER Use this to set two timers. Each timer can use the DIVIDER, SOURCE and WORK TIME functions. T urn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations. Example: TIMER1...VIDEO1 will be displayed for 3 minutes. TIMER2...RGB1 will be displayed for 6 minutes in a 2 × 2 video wall. Perform Steps 1-2 of VID[...]

40 Color System Settings Menu Setting the video signal format Use these operations to set the color systems of composite video signals or Y/C input signals. Example: Setting the color system to “ 3.58 NTSC ” 1. On the MAIN MENU, select “ COLOR SYSTEM ” , then press the MENU/ENTER button. The “ COLOR SYSTEM ” screen appears. 2. T o selec[...]

41 External Control Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . Connector on the plasma monitor side: EXTERNAL CONTROL connector . Use a crossed (reverse) cable. T ype of connector: D-Sub 9-pin male 1 5 9 6 2 34 7 8 Pin Name No C[...]

42 Remedy • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in humidity . This will not affect performance. • Leave some space between the display and the connected components. • Replace both batteries with new ones. • Set IR REMOTE OFF on OPTION3 menu. • Set an ID number with t[...]

43 *1 Overheat protector If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn of f the power to the monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location and wait for the monitor to cool fo[...]

[...]

Model PD4220V Information Plasma Monitor[...]

2[...]

3 W arning Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment ANSI/NFP A 75. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga[...]

4 A ver tissement Ne pas utiliser dans une salle d’ordinateurs telle que définie dans la Norme pour la protection des ordinateurs électroniques/appareils de traitement des données ANSI/ NFP A75. DOC avis de conformation Cet appareil numérigue de la Classe A respecte toutes les exigences du Réglement sur le Matériel Brouilleur du Canada. Rec[...]

5 Specifications Screen Size 36.3"(H)  20.4"(V) inches 921(H)  518(V) mm diagonal 42" Aspect Ratio 16 : 9 Resolution 853(H)  480(V) pixels Pixel Pitch 0.04"(H)  0.04"(V) inches 1.08(H)  1.08(V) mm Color Reproduction 256 levels, 16,770,000 colors Signals Synchronization Range Horizontal : 15.5 to 1 10 kHz (aut[...]

6[...]

7  42Wide VGA Suppor ted resolution • When the screen mode is NORMAL, each signal is converted to a 640 dots  480 lines signal (42W ide VGA). (Except for * 2, * 4 ) • When the screen mode is FULL, each signal is converted to a 853 dots  480 lines signal (42W ide VGA). (Except for * 3 ) Computer input signals supported by this system T [...]

8 *1 Only when using a graphic accelerator board that is capable of displaying 852  480. *2 Display only 400 lines (42Wide VGA) with the screen center of the vertical orientation located at the center . *3 The picture is displayed in the original resolution. The picture will be compressed for other signals. *4 Aspect ratio is 5:4. This signal is[...]

Printed in Japan 02/2004 ECMar 38AW851022 7S900057 is a registered trademark. www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Maran[...]