Marantz SR5009 инструкция обслуживания

. AV Surround Receiver SR5009 Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Settings Tips Appendix 1 Front panel Display Rear panel Remote Index[...]

Accessories 7 Inserting the batteries 8 Operating range of the remote control unit 8 Features 9 High quality sound 9 High performance 9 Easy operation 12 Part names and functions 13 Front panel 13 Display 16 Rear panel 18 Remote control unit 21 Connections Connecting speakers 25 Speaker installation 25 Speaker connection 28 Speaker configuration an[...]

Playing an iPod 60 Listening to music on an iPod 61 iPod Browse Mode settings 62 Performing repeat playback 64 Performing random playback 64 Playing a USB memory device 65 Playing files stored on USB memory devices 66 Listening to music on a Bluetooth device 68 Pairing with a Bluetooth device 69 Playing a Bluetooth device 70 Pairing with the Pairin[...]

AirPlay function 103 Playing songs from your iPhone, iPod touch or iPad 104 Playing iTunes music with this unit 104 Selecting multiple speakers (devices) 105 Perform iTunes playback operations with the remote control unit of this unit 105 Spotify Connect function 106 Playing Spotify music with this unit 106 Convenience functions 107 Performing repe[...]

Settings Menu map 145 Menu operations 148 Inputting characters 149 Using the keyboard screen 150 Audio 151 Dialog Level Adjust 151 Subwoofer Level Adjust 151 Surround Parameter 152 M-DAX 156 Audio Delay 157 Volume 157 Audyssey 158 Graphic EQ 160 Video 162 Picture Adjust 162 HDMI Setup 164 Output Settings 168 On Screen Display 172 TV Format 173 Inpu[...]

Network 196 Information 196 Connection 196 Wi-Fi Setup 197 Settings 199 IP Control 200 Friendly Name 201 Diagnostics 201 Maintenance Mode 202 General 203 Language 203 ECO 203 ZONE2 Setup 205 Zone Rename 206 Smart Select Names 206 Trigger Out 207 Front Display 207 Information 208 Usage Data 209 Firmware 210 Setup Lock 212 Limiting the operating zone[...]

Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product. . . . . . Quick Start Guide CD-ROM (Owner’s Manual) Safety In[...]

Inserting the batteries 1 Remove the rear lid in the direction of the arrow and remove it. . 2 Insert two batteries correctly into the battery compartment as indicated. . R03/AAA batteries 3 Put the rear cover back on. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two differe[...]

Features High quality sound 0 With discrete circuit technology, the power amplifier provides identical quality for all 7-channels (140 Watts x 7-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry). By using high current, high power discrete power devices, t[...]

0 Digital video processor upscales analog video signals (SD resolution) to HD (720p/1080p) and 4K ( v p. 234) . 4K 4K Up to 1080p 4K Up scaling This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution. This function enables the de[...]

0 The device is equipped with a AirPlay ® function in addition to network functions such as Internet radio etc. ( v p. 103) . You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television. This unit also supports Apple AirPlay wh[...]

0 Multi-Room audio ( v p. 117) . G MAIN ZONE HG ZONE2 H You can select and playback the respective inputs in the MAIN ZONE and in ZONE2. In addition, when the All Zone Stereo function is used, the music being played back in the MAIN ZONE can be enjoyed in all the zones at the same time, which is useful when you want to hear BGM throughout the whole[...]

Part names and functions Front panel . W 1 Q 9 Q 2 Q 3 Q 4 Q 5 Q 6 Q 7 Q 8 W 0 e w q y t ru i Q 0 Q 1 o Contents Connections Playback Settings Tips Appendix 13 Front panel Display Rear panel Remote Index[...]

. e w q y t ru i Q 0 Q 1 o A Power operation button ( X ) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). ( v p. 58) B Power indicator This is lit as follows according to the power status: 0 Off: Power on 0 Red: Normal standby 0 Orange: 0 When “HDMI Pass Through” ( v p. 166) is set to “On” 0 When [...]

. Q 9 Q 7 W 0 W 1 Q 2 Q 3 Q 4 Q 5 Q 6 Q 8 L ZONE2 ON/OFF button This turns the power of ZONE2 (separate room) on/off. ( v p. 143) M ZONE2 SOURCE button This selects the input source for ZONE2. ( v p. 143) N Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. ( v p. 77) O AUX1-HDMI connector This is used to [...]

Display The input source name, sound mode, setting values and other information are displayed here. o Standard display . q w A Volume indicator B Input source indicator The currently selected input source name is displayed. If the input source name has been changed using “Source Rename” ( v p. 176) in the menu, the input source name after the c[...]

o Sleep timer indicator . t E This lights when the sleep mode is selected. ( v p. 131) o ZONE2 power on display . y F This lights up when ZONE2 (separate room) power is turned on. ( v p. 143) Contents Connections Playback Settings Tips Appendix 17 Front panel Display Rear panel Remote Index[...]

Rear panel . Q 2 Q 5 Q 4 Q 3 Q 6 t o q q Q 1 i y u e w rt Q 0 Contents Connections Playback Settings Tips Appendix 18 Front panel Display Rear panel Remote Index[...]

. q q e w rt y t y A Rod antennas for Bluetooth/wireless LAN Stand this antenna upright when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. ( v p. 53) . 90° 320° 320° 90° The antenna clip can be removed from the rear panel. A Rotate the antenna clip 90 degrees to the left. B Pull the antenna cli[...]

. Q 2 Q 5 Q 4 Q 3 Q 6 Q 0 Q 1 o i u G Component video connectors (COMPONENT VIDEO) Used to connect devices equipped with component video connectors. ( v p. 44, 45) H HDMI connectors Used to connect devices equipped with HDMI connectors. ( v p. 40, 41, 44, 45) I AC inlet (AC IN) Used to connect the power cord. ( v p. 56) J DC OUT jack Used to connec[...]

Remote control unit . q w e t r u y A ZONE SELECT buttons (MAIN, ZONE2) These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit. ( v p. 143, 148) B Input source select buttons These selects the input source. ( v p. 58, 143) C Channel/page select buttons (CH/PAGE df ) These select radio stations registered to preset[...]

. Q0 o Q2 Q1 i H System buttons These perform playback related operations. ( v p. 62) 0 Skip buttons ( 8 , 9 ) 0 Play/pause button ( 1 / 3 ) Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast. ( v p. 74) I SMART SELECT buttons (1 – 4) These call up settings registered to each button, such as input sourc[...]

. Q3 Q5 Q4 Q8 Q6 Q7 M POWER button ( X ) This turns the power on/off. ( v p. 58, 143) N ECO Mode button ( G ) This switches to ECO Mode. ( v p. 203) O VOLUME buttons ( df ) These adjusts the volume level. ( v p. 59, 144) P OPTION button This displays the option menu on the TV screen. ( v p. 107) Q ENTER button This determines the selection. ( v p. [...]

o Contents Connecting speakers 25 Connecting a TV 39 Connecting a playback device 43 Connecting an iPod or USB memory device to the USB port 48 Connecting an FM/AM antenna 50 Connecting to a home network (LAN) 52 Connecting an external control device 54 Connecting the power cord 56 NOTE 0 Do not plug in the power cord until all connections have bee[...]

Connecting speakers Install speakers and connect them to this unit. ( v p. 25, 28) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. . FHL FL SW1 C SL SBL FHR FR SR SBR[...]

0 This unit is compatible with Dolby Pro Logic g z ( v p. 252) which offers an even wider and deeper surround sensation. When using Dolby Pro Logic g z, install front height speakers. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same. . z Surround back speaker At l[...]

o When 7.1-channel speakers are installed using surround back speakers . z 1 z 2 z 3 FL SW C SL SBL FR SR SBR Listening position z 1:22° - 30° z 2:90° - 110° z 3:135° - 150° When using a single surround back speaker, place it directly behind the listening position. o When 7.1-channel speakers are installed using front height speakers . z 1 z [...]

Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker ter[...]

o Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 1 Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tight[...]

o About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. Speaker terminals Color FRONT L White FRONT R Red CENTER Green SURROUND L Light blue SURROUND R Blue SURROUND BACK L Beige SURROUND BACK R Brown SUBWOOFER Black[...]

Speaker configuration and Amp Assign settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” ( v p. 188) settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-z[...]

o Standard configuration and connection n 5.1-channel This serves as a basic 5.1-channel surround system. Sound modes such as Dolby Pro Logic g are supported. . FL SW C SL FR SR . FL FR C SR SL SW Contents Connections Playback Settings Tips Appendix 32 Front panel Display Rear panel Remote Index[...]

n 7.1-channel (surround back) This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. Sound modes such as Dolby Pro Logic g x are supported. . FL SW SL FR SR SBR SBL . FL FR C SR SL SBR SBL SW When using a single surround back speaker, connect it to the SURROUND BACK L terminal. Contents Connectio[...]

n 7.1-channel (front height) This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. Sound modes such as Dolby Pro Logic g z are supported. . FL SW C SL FHR FR SR FHL . FL FR C SR SL FHR FHL SW Contents Connections Playback Settings Tips Appendix 34 Front panel Display Rear panel Remote Index[...]

o Applied configuration and connection n 5.1-channel (bi-amp connection of front speaker) This is a method of connecting separate amplifiers to the tweeter terminals and woofer terminals of bi-amp compatible speakers. This connection enables back EMF (power returned without being output) from the woofer to flow into the tweeter without affecting th[...]

n 5.1-channel + front speaker of second unit This system enables switching playback between front speakers A and B as desired. . SW C SL SR FL FL (B) (A) FR FR (A) (B) . CS R S L SW FR (B) FL (B) FL (A) FR (A) Contents Connections Playback Settings Tips Appendix 36 Front panel Display Rear panel Remote Index[...]

n 5.1-channel (MAIN ZONE) + 2-channel (ZONE2) This connection method constructs a 5.1-channel speaker system in the MAIN ZONE and a 2-channel system in ZONE2. MAIN ZONE . FL SW C SL FR SR ZONE2 . ZONE2 L ZONE2 R . FL FR C SR SL SW ZONE2 R ZONE2 L Contents Connections Playback Settings Tips Appendix 37 Front panel Display Rear panel Remote Index[...]

o Connecting an external power amplifier 0 You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. 0 Select the terminal to use and connect the device. . L L L L L L R R R R R R CENTER SURROUND BACK R L SUR[...]

Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. . No Yes[...]

Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” ( v p. 166) to “On” when using a TV that supports the ARC function. . (ARC) IN HDMI TV When using the HDMI control function, connect [...]

Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. . OUT OPTICAL OUT IN IN HDMI TV Contents Connections Playback Settings Tips Appendix 41 Front panel Dis[...]

Connection 3 : TV equipped without an HDMI connector Use a component video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. . IN VIDEO IN COMPONENT VIDEO YP B P R IN OUT OPTICAL OUT or TV Contents Connections Playback Settings Tips Appendix 42 Front panel Display Rea[...]

Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to t[...]

Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. . R L R L AUD IO AUDIO RL OUT OUT HDMI OUT VIDEO VIDEO COMPONENT VIDEO YP B P R OUT COAXIAL OUT or D V[...]

Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. . R L R L OUT HDMI OUT COAXIAL AUDIO AUDIO RL OUT OUT VIDEO VIDEO COMPONENT VIDEO YP B P R OUT or (HDM[...]

Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. . OUT HDMI R L R L AUD IO AUD IO R L OUT OUT VIDEO VIDEO Video camcorder Video camcorder (HDMI incompatible device) Contents Connections Playback [...]

Connecting a device with a multi-channel output connector You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. To play analog signals input from 7.1CH IN connectors, set “Input Mode” ( v p. 177) to “7.1CH IN”. . L L R R L L R R L L R R SUB- WOOFER CENTER SURROUND B[...]

Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” ( v p. 60) or “Playing a USB memory device” ( v p. 65). . iPod or USB memory device Marantz does not guarantee that all USB memory devices will o[...]

o Supported iPod/iPhone models . • iP od classic • iP od nano • iP od touc h • iPhone Contents Connections Playback Settings Tips Appendix 49 Front panel Display Rear panel Remote Index[...]

Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” ( v p. 74)) If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For [...]

o Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. . Nail, tack, etc. Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. . o AM loop antenna assembly 1 Put the stand section through the bottom of the loop antenna from the rear and bend it f[...]

Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below. 0 Playback of network audio such as Internet Radio and from your media server(s) 0 Playback of music content from online [...]

Wireless LAN When connecting to a wireless LAN network, stand the rod antenna for wireless LAN/Bluetooth connection upright on the rear panel. See “Wi-Fi Setup” ( v p. 197) on how to connect to a wireless LAN router. . Internet Modem T o W AN side Router with access point 0 When using this unit, we recommend you use a router equipped with the f[...]

Connecting an external control device REMOTE CONTROL jacks o Performing operations by RC on this unit without visual contact You can connect an external IR receiver to the REMOTE CONTROL connectors to perform operations on this unit with the supplied remote control unit without visual contact. This might be necessary if the unit is hidden in a cupb[...]

DC OUT jack When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The DC OUT jack outputs a maximum 12 V DC /150 mA electrical signal. . 12 V DC/150 mA trigger-compatible de vice NOTE 0 Use a monaural mini-plug cable for connecting the DC OUT jacks. Do not use [...]

Connecting the power cord After completing all the connections, insert the power plug into the power outlet. . P ow er cord (supplied) (A C 120 V , 60 Hz) T o household po wer outlet Contents Connections Playback Settings Tips Appendix 56 Front panel Display Rear panel Remote Index[...]

o Contents Basic operation Turning the power on 58 Selecting the input source 58 Adjusting the volume 59 Turning off the sound temporarily (Muting) 59 Selecting a sound mode 118 Playback a device Playing a DVD player/Blu-ray Disc player 59 Playing an iPod 60 Playing a USB memory device 65 Playing a Bluetooth device 70 Listening to FM/AM broadcasts [...]

Basic operation . BACK SETUP ENTER SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD VOLUME MUTE MUTE POWER VOLUME X df : Input source select buttons Tu[...]

Adjusting the volume 1 Use VOLUME df to adjust the volume. 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning VOLUME on the main unit. Turning off the sound temporarily (Muting) 1 Press MUTE : . 0 “MUTE” appears on the display. 0 : appears on the TV screen. 0 [...]

Playing an iPod . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER CH / PA GE BACK ENTER OPTION iPod/ USB 1 / 3 8 9 iPod/USB uio p ENTER OPTION CH/PAGE df BACK 0[...]

Listening to music on an iPod 1 Connect the iPod to the USB port. ( v p. 48) 2 Press iPod/USB to switch the input source to “iPod/ USB”. “Browse from iPod” is displayed on the display of this unit. 0 Nothing is displayed on the TV screen. 3 Operate iPod itself while seeing the iPod screen to play back music. 0 “iPod Browse Mode” has two[...]

iPod Browse Mode settings In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. 1 Press OPTION when the input source is “iPod/USB”. The option menu screen is displayed. 2 Select “iPod Browse Mode”, then pr[...]

o Operations accessible through the option menu This can be operated when the “iPod Browse Mode” is set to “On- Screen”. ( v p. 62) 0 “iPod Browse Mode settings” ( v p. 62) 0 “Performing repeat playback” ( v p. 64) 0 “Performing random playback” ( v p. 64) 0 “Adjusting the volume of each channel to match the input source (Chan[...]

Performing repeat playback 1 Press OPTION with “iPod Browse Mode” set to “On- Screen”. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeatedly. All: All files in the folder[...]

Playing a USB memory device . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER CH / PA GE BACK ENTER OPTION iPod/ USB 1 / 3 8 9 iPod/USB ui p ENTER OPTION CH/PAG[...]

Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. ( v p. 48) 2 Press iPod/USB to switch the input source to “iPod/ USB”. . Folder1 Folder2 Folder3 Music1 Music2 Music3 Music4 OPTION OPTION USB [1/9] Option 3 Use ui p to select the file to be played, then press ENTER. Playback starts. Operation buttons F[...]

o Operations accessible through the option menu 0 “Performing repeat playback” ( v p. 108) 0 “Performing random playback” ( v p. 108) 0 “Searching content with keywords (Text Search)” ( v p. 110) 0 “Playing back music and a favorite picture at the same time (Slideshow)” ( v p. 111) 0 “Setting the Slideshow Interval” ( v p. 112) [...]

Listening to music on a Bluetooth device . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER BACK ENTER OPTION Bluetooth 1 / 3 8 9 ui ENTER OPTION Blue[...]

Pairing with a Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Press Bluetooth to switch the input source to “Bluetooth”. . OPTION OPTION Bluetooth Music Device Now Playing Ar[...]

Playing a Bluetooth device Check the following before you play back music. 0 The Bluetooth function of the Bluetooth device must be turned on 0 Pairing must be completed 1 Press Bluetooth to switch the input source to “Bluetooth”. The unit will automatically connect to the most recently used Bluetooth device. 2 Start playing the Bluetooth devic[...]

NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices. 0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled to the volume setting on the Bluetooth devi[...]

Pairing with the Pairing Mode Pair a Bluetooth device with this unit. 1 Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. 2 Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode. 3 Select this unit when its name appears in the list of devices displayed on the screen[...]

Listening to FM/AM broadcasts . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth INTERNET RAD IO ONLINE MUSIC AUX2 CD SETUP SOUND MODE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER TUNER OPTION CH / PA GE BACK ENTER TUNE + - TUNE TUNER uio p ENTER CH/PAGE df BACK TUNE +,[...]

Listening to FM/AM broadcasts 1 Connect the antenna. (“Connecting an FM/AM antenna” ( v p. 50)) 2 Press TUNER to switch the input source to “Tuner”. G TV screen H . TUNE+/- TUNE+/- STEREO AUTO CH / CH / OPTION OPTION TUNER FM 92.10MHz Now Playing Tune Preset Option CH 1 G Display of this unit H . 3 Press OPTION. The option menu screen is di[...]

o Operations accessible through the option menu 0 “Tuning in by entering the frequency (Direct Tune)” ( v p. 75) 0 “Changing the tune mode (Tune Mode)” ( v p. 76) 0 “Tuning in to stations and presetting them automatically (Auto Preset Memory)” ( v p. 76) 0 “Presetting the current broadcast station (Preset Memory)” ( v p. 77) 0 “Sp[...]

Changing the tune mode (Tune Mode) You can change the mode for tuning into FM and AM broadcasts. If you cannot tune in automatically with “Auto” mode, change the mode to “Manual” and tune in manually. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Tune Mode”, then press ENTE[...]

Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” ( v p. 74)) 2 Press OPTION. The option menu screen is displayed. 3 Use ui to select “[...]

Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Preset Name”, then press ENTER. The Preset Name screen is displayed. 3[...]

Skipping preset broadcast stations (Preset Skip) Perform auto preset memory to save all the broadcasting stations that can be received in the memory. Selecting a broadcast station becomes easier by skipping unnecessary memories. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Preset Sk[...]

Cancelling Preset Skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. 3 Use o p to select “On”. The skip is cancelled. NOTE Preset skip cannot be cancelled for groups. Contents Connections Playback Settin[...]

Listening to Internet Radio . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER ONLINE MUSIC CH / PA GE INTERNET RAD IO BACK OPTION ENTER 1 / 3 uio p ENTER CH/PAGE df BACK OPTION ON[...]

Listening to Internet Radio 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) 2 Press ONLINE MUSIC. 0 You can also press INTERNET RADIO to select the input source “Internet Radio” directly. 3 Use uio p to select “Internet Radio”, then press ENTER.[...]

5 Use ui p to select the station, then press ENTER. Playback starts once buffering reaches “100%”. Operation buttons Function 1 / 3 Playback / Stop ENTER (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display 0 The display switches between track title and radio station name etc. each time the main unit’s S[...]

Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet Radio station search website specific[...]

Playing back files stored on a PC and NAS . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO AUX2 CD SETUP SOUND MODE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER ONLINE MUSIC BACK ENTER TUNE + - TUNE OPTION CH / PA GE uio p 8 9 ENTER OPTION CH/PAG[...]

Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. . o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 Start up Windows Media Player 12 on the PC. 2 Select “More streaming options...” in the “[...]

Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) B Prepare the computer. ( v Computer’s operating instructions) 2 Press ONLINE MUSIC. 3 Use uio [...]

0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. 0 If you use Ver.11 or later of Windows Media Player, the album art for WMA file[...]

Viewing photographs on the Flickr site . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO AUX2 CD SETUP SOUND MODE - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER ONLINE MUSIC CH / PA GE BACK ENTER OPTION TUNE + uio p ENTER OPTION CH/PAGE df BA[...]

Viewing photographs shared by particular users 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) 2 Press ONLINE MUSIC. 3 Use uio p to select “Flickr”, then press ENTER. . Favorites Internet Radio Media Server Online Music 4 Use ui to select “Add Fli[...]

8 Use ui to select the folder, then press ENTER. Favorites : Displays the favorite photographs of the specified user. Photostream : Displays a list of shared photographs. PhotoSets : Displays the folder (photograph album) list. Contacts : Displays the screen name used by the specified user in Contacts. Remove this Contact : Deletes a user from Flic[...]

Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER. 2 Use ui to select the folder, and then press ENTER. Interestingness : Displays photographs that are popular from the number of user comments or number of times they are added as favorites. Recent : Displays the most recently added photographs. Search by text [...]

Listening to Pandora ® . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER ONLINE MUSIC CH / PA GE BACK ENTER OPTION 1 / 3 9 uio p ENTER OPTION CH/PAGE df BACK ONLI[...]

Listening to Pandora ® 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) 2 Press ONLINE MUSIC. 3 Use uio p to select “Pandora”, then press ENTER. . Online Music Favorites Internet Radio Media Server 4 If you have a Pandora account, use ui to select ?[...]

5 Input “Email address” and “Password”. 0 For character input, see “Using the keyboard screen” ( v p. 150). 0 Press BACK to cancel the input. When “Cancel input?” is displayed, select “Yes”, then press ENTER. 6 After inputting the “Email address” and “Password”, select “OK”, then press ENTER. If the “Email address?[...]

Creating a new station You can create up to 100 radio stations. 1 Use ui to select “New Station”, then press ENTER. 2 Input a track or artist name, then press “OK”. 0 For character input, see “Using the keyboard screen” ( v p. 150). 3 Use ui to select “Search by Artist” or “Search by Track”, then press ENTER. You can search and [...]

Listening to an existing station 1 Use ui and select the radio station that you want to listen to, then press ENTER. You can skip up to 6 tracks that are being played back within 1 hour. Listening to created radio stations at random 1 Use ui to select “Shuffle”, then press ENTER. Created radio stations are selected at random, and tracks are str[...]

Giving feedback and managing stations You can personalize your stations by providing feedback. 1 Press p while a track is playing. The Pandora menu screen is displayed. I like this track : Press when you like the track that is being played. Playback a favorite track. Display the E (Thumbs up) icon. I don’t like this track : Press when you don’t[...]

Sign Out Disassociate this unit from your Pandora account. 1 Use ui to select “Sign Out”, then press ENTER. 2 When the popup menu appears, use o p to select “Yes”, then press ENTER. o Operations accessible through the option menu 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” ( v p. 113) 0 “A[...]

Listening to SiriusXM Internet Radio . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO AUX2 CD SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER BACK ENTER OPTION ONLINE MUSIC CH / PA GE CBL /SA T GAME DVD AUX1 MEDIA PLAY[...]

Listening to SiriusXM Internet Radio Over 155 channels commercial-free music, plus play-by-play sports, exclusive talk, comedy and entertainment. 1 Prepare for playback. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) B Access the following website from your PC and obtain a Si[...]

7 Use ui to select the genre, then press ENTER. 8 Use ui to select the file, then press ENTER. The selected file is displayed. Operation buttons Function 1 / 3 Playback / Stop ENTER Playback (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display Sign Out Disassociate this unit from your SiriusXM account. 1 Use u[...]

AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 X is displayed on the menu screen while AirPlay is being operated. 0 Source input will be switched to “Online Music” when AirPlay playback is started. 0 You can stop AirPlay playback by pressing o or choosing other input [...]

Playing songs from your iPhone, iPod touch or iPad If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. 1 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 Play the song[...]

Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 Click the AirPlay icon ' and select “Multiple”. 2 Check the speakers you want to use. NOTE In playback using the AirPlay function, the sound is output at the iPhone, iPod touch, i[...]

Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. To try Spotify Premium free for 30 days, or learn more abo[...]

Convenience functions . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO AUX2 CD BACK SETUP SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP ZONE 2 POWER OPTION ENTER ONLINE MUSIC MAIN MAIN uio p ENTER OPTION ONLINE MUSIC This section[...]

Performing repeat playback n Supported input sources : USB / Media Server / Bluetooth 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeate[...]

Registering to Favorites You can register a total of 100 favorites. n Supported input sources : Internet Radio / Media Server / Pandora / SiriusXM 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Save to Favorites”, then press ENTER. “Favorite added” is displayed, and the current content is [...]

Deleting content added to favorites 1 Press ONLINE MUSIC. 2 Use uio p to select “Favorites”, then press ENTER. 3 Use ui to select the content you want to delete from favorites, then press OPTION. The option menu screen is displayed. 4 Use ui to select “Remove from Favorites”, then press ENTER. “Favorite removed” is displayed, and the se[...]

Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB 1 Play back a still picture. 0 Playing back still pictures stored on USB memory devices. ( v p. 66) 2 Play back a music file. ( v p. 66) 3 Press OPTION. The option menu screen is displayed. 4 Use ui to select “Slideshow”, then press ENTER. The[...]

Setting the Slideshow Interval Set the playback interval when playing back a slideshow of still picture (JPEG) files stored on a USB memory device or media server, or on the Flickr website. n Supported input sources : USB / Media Server / Flickr 1 While the list is displayed, press OPTION. The option menu screen is displayed. 2 Use ui to select “[...]

Adjusting the volume of each channel to match the input source (Channel Level Adjust) The volume of each channel can be changed while listening to music. You can set this for each input source. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Channel Level Adjust”, then press ENTER. The channel level adjust screen is dis[...]

Adjusting the tone (Tone) Adjusts the tonal quality of the sound. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Tone”, then press ENTER. The tone control screen is displayed. 3 Use o p to set the tone control function to on/off. On: Allow tone adjustment (bass, treble). Off (Default) : Playback without tone adjustment[...]

Displaying your desired video during audio playback (Video Select) This unit can display video from a different source on TV during audio playback. You can set this for each input source. n Supported input sources : iPod/USB / CD z / Tuner / Online Music / Bluetooth z This cannot be set when any of the HDMI, component video or video connectors are [...]

Adjusting the picture quality for your viewing environment (Picture Mode) n Supported input sources : CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / iPod/USB / Online Music / CD z / TV Audio z z You can set the picture mode when an HDMI, component video or video connector is assigned. 1 Press OPTION during video playback. The option [...]

Playing the same music in all zones (All Zone Stereo) You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 (another room). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. 1 Press OPTION. The option me[...]

Selecting a sound mode . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RADIO ONLINE MUSIC AUX2 CD BACK SETUP TUNE + - TUNE SMART SELECT 1234 INFO OPTION CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER SOUND MODE PURE MOVIE GAME MUSIC ENTER PURE MOVIE MUSIC GAME ui This unit allows you to [...]

Selecting a sound mode 1 Press MOVIE, MUSIC or GAME to select a sound mode. MOVIE : Switches to the sound mode suitable for enjoying movies and TV programs. MUSIC : Switches to the sound mode suitable for enjoying music. GAME : Switches to the sound mode suitable for enjoying games. 0 The MOVIE, MUSIC, or GAME button memorizes the last sound mode s[...]

Direct playback Sound recorded in source is played as is. 1 Press PURE to select “Direct”. Direct playback begins. This can also be set by pressing PURE DIRECT on the main unit. Pure Direct playback This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display and analog video circui[...]

Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. Auto su[...]

o Description of sound mode types Dolby sound mode Sound mode type Description Dolby PL g x z 1 This mode can be selected when the Dolby PL g x decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s). By adding the surround back channel(s), a more enveloping surround environment is pro[...]

DTS sound mode Sound mode type Description DTS Neo:6 This mode can be selected when the DTS Neo:6 decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s). There are two playback modes: “Cinema” mode that is optimized for movie playback, “Music” mode that is optimized for music [...]

Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Stereo audio (2-channel) sources are played back via the front (L/R) speakers, the surround speakers and surround back speakers (if connected). Virtual This mode lets you experience an expansive surround sound effect when playin[...]

Stereo sound mode Sound mode type Description Stereo This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected. 0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surro[...]

o Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. 0 Adjust the sound field effect with the menu “Surround Parameter” ( v p. 152) to enjoy surround sound the way you like it. Input signal Sound mode MOVIE button MUSIC button GAME button 2-channel z 1 Stere[...]

Input signal Sound mode MOVIE button MUSIC button GAME button Multi-channel z 3 Stereo S S S Dolby Digital Dolby Digital S S S Dolby Digital EX S S S Dolby Digital + PL g x Cinema S Dolby Digital + PL g x Music S Dolby Digital + PL g z S S S Dolby TrueHD Dolby TrueHD S S S Dolby TrueHD + EX S S S Dolby TrueHD + PL g x Cinema S Dolby TrueHD + PL g x[...]

Input signal Sound mode MOVIE button MUSIC button GAME button DTS-HD/ DTS Express DTS-HD Hi Res S S S DTS-HD Mstr S S S DTS Express S S S DTS-HD + PL g x Cinema S DTS-HD + PL g x Music S S DTS-HD + PL g z S S S DTS-HD + Neo:6 S S PCM multi-channel Multi Ch In S S S Multi Ch In 7.1 S S S Multi In + Dolby EX S S S Multi In + PL g x Cinema S Multi In [...]

o Views on the display . q w A Shows a decoder to be used. 0 In the case of the Dolby Digital Plus decoder, “ Y ” is displayed. B Shows a decoder that creates sound output. 0 “+ PL g z” indicates that the PL g z decoder is being used, and that front height channel sound is being created. Contents Connections Playback Settings Tips Appendix [...]

HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 Enable the HDMI control function of this unit. Set “HDMI Control” ( v p. 166) to “On”. 2 Turn the power on for [...]

Sleep timer function . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD BACK SETUP ENTER SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE VOLUME MUTE ECO POWER ZONE SELECT SLEEP MAIN ZONE 2 ZONE2 SLEEP MAIN You can have the power automatica[...]

Using the sleep timer 1 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press SLEEP and display the time you want to set. 0 The sleep timer indicator lights up on the display and the sleep timer starts. 0 You can set the sleep timer in the range from 10 to 120 minutes in steps of [...]

Smart select function . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD BACK SETUP ENTER SOUND MODE TUNE + - TUNE PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP MAIN ZONE 2 POWER SMART SELECT 1234 SMART SELECT 1 – 4 Settings such as the input s[...]

Calling up the settings 1 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press SMART SELECT. The Smart Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below. G MAIN ZONE H Button Input source [...]

Changing the settings 1 Set the items below to the settings you want to register. The following settings from A to H can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2. A Input source ( v p. 58) B Volume ( v p. 59) C Sound mode ( v p. 118) D Audyssey (Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® , Audyssey Dynamic Volu[...]

Web control function You can control this unit from a web control screen on a web browser. . This unit PC Router Tablet 0 This unit and the PC or tablet need to be connected correctly to the network in order to use the web control function. (“Connecting to a home network (LAN)” ( v p. 52)) 0 Depending on the settings of your security-related so[...]

4 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. . http://192.168.100.19 File Edit View Tools Help Favorites 5 When the top menu is displayed, click on the menu item you want to operate. . MAIN ZONE CBL/SA T ZONE2 CBL/SA T Load SR5[...]

Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. . TUNER PRESET CH – TUNER PRESET CH + X M-D AX DIMMER ST A TUS Disabling all key button operations 1 Press X while you press and hold M-DAX and DIMMER with the unit in standby mode. 2 Use TUNER PRESET CH + or TUNER PRESET[...]

Canceling the Panel lock function 1 Press X while you press and hold M-DAX and DIMMER with the unit in standby mode. 2 Press TUNER PRESET CH + or TUNER PRESET CH - to select “FP LOCK z Off”. ( z The currently set mode.) 3 Press STATUS to enter the setting. The Panel lock function is canceled. Even when the Panel lock function is set, you can op[...]

Remote lock function When connecting an IR receiver, enable the Remote lock function. When the function is enabled, you can not perform operations with the remote control unit. By default, this function is disabled. . TUNER PRESET CH – TUNER PRESET CH + X M-D AX DIMMER ST A TUS Disabling the sensor function of the remote control unit 1 Press X wh[...]

Playback in ZONE2 (Separate room) You can operate this unit to enjoy audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Connecting ZONE2 You can use the fol[...]

o Connection 2 : Connection using an external amplifier The audio signals of this unit’s ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers. . A UX IN R L Power amplifier ZONE2 This unit MAIN ZONE Contents Connections Playback Settings Tips Appendix 142 Front panel Display Rear panel Remote Index[...]

Playback in ZONE2 . BACK SETUP ENTER SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE ECO ZONE SELECT SLEEP MAIN POWER ZONE 2 CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD VOLUME MUTE ZONE2 MUTE POWER VOLUME X df : Input source select bu[...]

o Adjusting the volume Use VOLUME df to adjust the volume. 0 At time of purchase, “Volume Limit” is set to “70 （ –10 dB ） ”. ( v p. 205) Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the sound volume. o Turning off the sound temporarily (Muting) Press MUTE : . The sound is reduced to the level set at “Mute Level[...]

Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Description Page . Audio Dialog Level Adjust This setting adjusts th[...]

Setting items Detailed items Description Page . Inputs Input Assign Changes input connector assignment. 174 Source Rename Changes the display name for input source. 176 Hide Sources Removes from the display input sources that are not used. 176 Source Level Adjusts the playback level of the audio input. 176 Input Select Sets the audio input mode and[...]

Setting items Detailed items Description Page . General Language Changes the language of the display on the TV screen. 203 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 203 ZONE2 Setup Sets ZONE2 audio playback settings. 205 Zone Rename Changes the display title of each zone to one you prefer. 206 Smart Select Names Changes [...]

. CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP ZONE 2 POWER BACK SETUP ENTER MAIN uio p ENTER SETUP BACK MAIN Menu operations 1 Press MAIN on the remote [...]

Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Preset Name ( v p. 78) 0 Text Search ( v p. 110) 0 Source Rename ( v p. 176) 0 Friendly Name ( v p. 201) 0 Zone Rename ( v p. 206) 0 Smart Select Names ( v p. 206) 0 Character input for the network functions Contents Connect[...]

Using the keyboard screen 1 Display the screen for inputting characters. G Example H “Source Rename” screen . Inputs/Source Rename Changes the display name for this source CBL/SAT A N 0 $ B O 1 % C P 2 & D Q 3 ‘ E R 4 ( F S 5 ) G T 6 * H U 7 + I V 8 , J W 9 ; K X ! < L Y “ = M Z # > CBL/SAT Clear Clear Insert Insert Delete Delete [...]

Audio Make audio-related settings. Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel. o Dialog Level Adjust Set whether to adjust the dialog level or not. On: Enables the adjustment of the dialog level. Off (Default) : Disables the adjustment of the dialog level. o Level Adjusts the vol[...]

Surround Parameter You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” ( v p. 244). 0 Some setting items cannot be set whi[...]

o Dynamic Compression Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off. 0 “Auto” can only be set when Dolby TrueHD signals are input. 0 The default sett[...]

o Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. 0.0 – 1.0 (Default : 0.3) 0 You can set this when the sound mode is DTS Neo:6 in the “Music” mode. 0 The smaller the value, the more dialogue is concentrated on the center channel. The larger the[...]

o Height Gain Control the front height channel volume. Low: Reduce the front height channel volume. Normal (Default) : Front height channel sound is output with standard sound volume. High: Increase the front height channel volume. You can set this in the “PL g z” sound mode or when using the PL g z decoder. o Subwoofer Turn subwoofer output on[...]

M-DAX Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “M-DAX” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It[...]

Audio Delay Compensates for incorrect timing between video and audio. 0 ms – 200 ms (Default : 0 ms) 0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or “Game”. ( v p. 168) 0 “Audio Delay” settings are stored for each input source. Volume Set the MAIN ZONE (room where the unit is located) volume setting. o[...]

Audyssey Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see “Explanation of terms” ( v p. 250). 0 “MultEQ ® XT”, “Dynamic EQ” and “Dynamic Volume” settings are stored for ea[...]

o Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. On (Default) : Use Dynamic EQ. Off: Do not use Dynamic EQ. When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone Control” adjustment. ( v p. 114) [...]

o Dynamic Volume Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Heavy: Most adjustment to softest and loudest sounds. Medium: Medium adjustment to loudest and softest sound. Light: Least [...]

o Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. All: Adjust all speaker tones together. Left/Right (Default) : Adjust the left and right speaker tones together. Each: Adjust the tone for each speaker. o Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker S[...]

Video Make video-related settings. Picture Adjust Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. ( v p. 169) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. ( v p. 175) 0 “Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enh[...]

0 The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISF- certified technician. 0 These settings can also be configured using “Picture Mode” in the option menu. [...]

o Noise Reduction Reduce overall video noise. Low / Medium / High / Off (Default : Off) o Enhancer Emphasize picture sharpness. 0 – +12 (Default : 0) HDMI Setup Make settings for HDMI video/audio output. NOTE When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for [...]

o HDMI Audio Out Select HDMI audio output device. AVR (Default) : Play back through speakers connected to the unit. TV: Play back through TV connected to the unit. 0 When the HDMI control function is activated, priority is given to the TV audio setting. (“HDMI control function” ( v p. 130)) 0 When the power of this unit is on and “HDMI Audio [...]

o HDMI Pass Through Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. On (Default) : Transmits the selected HDMI input through the AV receiver’s HDMI output when this unit is in standby power mode. Off: No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. o HDMI Control [...]

o Pass Through Source Sets the HDMI connector that inputs HDMI signals when in standby. Last: The most recently used input source will go into standby mode. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / CD z (Default : CBL/SAT) : Pass through the selected input source. z “Pass Through Source” can be set when any of the HDMI conn[...]

Output Settings Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” ( v p. 175) is assigned for each input source. 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”. 0 “Output Settings” cannot be set when 4K signals are [...]

o Video Conversion The input video signal is converted automatically in conjunction with the connected TV. (“Video conversion function” ( v p. 237)) On (Default) : The input video signal is converted. Off: The input video signal is not converted. o i/p Scaler Set the video input signal to be subjected to i/p scaler processing. i/p Scaler will c[...]

n When the input source is set to “iPod/USB” and “Online Music” On (Default) : Use i/p scaler function. Off: Do not use i/p scaler function. 0 “Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned. 0 Which items can be set depend on the input source assigned to each input connector. 0 This functi[...]

o Progressive Mode Set an appropriate progressive conversion mode for the source video signal. Auto (Default) : The video signal is automatically detected and the appropriate mode is set. Video: Select mode suitable for video playback. Video and Film: Select mode suitable for video and 30- frame film material playback. This item can be set when “[...]

On Screen Display Select the on-screen display user interface preferences. o Volume Sets where to display the volume level. Bottom (Default) : Display at the bottom. Top: Display at the top. Off: Turn display off. When the master volume display is hard to see when superimposed text (closed captioning) or movie subtitles are present, set to “Top?[...]

TV Format Set the video signal format to be output for the TV you are using. o Format NTSC (Default) : Select NTSC output. PAL: Select PAL output. “Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s ZONE2 SOURCE and[...]

Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audi[...]

o HDMI Set this to change the HDMI input connectors assigned to the input sources. 1 / 2 / 3 / 4 / 5 / 6 / 7 / Front: Assign an HDMI input connector to the selected input source. – : Do not assign an HDMI input connector to the selected input source. When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned to “TV Au[...]

Source Rename Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 [...]

Input Select Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. “Input Select” settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to ?[...]

Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. You do not have to perform Audyssey ® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”. To set up the speakers manually, use[...]

o About the main listening position The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey ® Setup, place the Sound calibration microphone in the main listening position. Audyssey MultEQ ® XT uses the measurements from this pos[...]

Procedure for speaker settings (Audyssey ® Setup) . Finish Check Calculation & Store Measurement Preparation 1 Attach the Sound calibration microphone to the supplied 3-legged stand or enclosed stand and install it at the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceili[...]

3 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. . When the Sound calibration microphone is connected, the following scr een is displayed. . Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the[...]

6 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. . Begin Test Back Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests. Audyssey Setup Ear Height 0 Measurement requires several minutes.[...]

8 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. . Complete Continue Place the microphone ear level at the 2nd listening position, which should be no more than 2 ft (60cm) away from the 1st position, then [...]

11 Perform the settings for Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . The following screen is displayed during the analysis. Configure the settings as preferred. . Audyssey Setup Audyssey Dynamic EQ maintains bass, clarity and surround sound at low volumes letting you enjoy late-night movies and television. Turn on the Dynamic EQ? Yes[...]

13 Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE Do not change the speaker connection or subwoofer volume after Audyssey ® Setup. If these are changed, run Audyssey ® Setup again in order[...]

Error messages An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details Measures No spea[...]

Retrieving Audyssey ® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey ® Setup measurement result (value calculated at the start by MultEQ ® XT) even when you have changed each setting manually. . Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically meas[...]

Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. 0 If you change the speaker settings after performing Audyssey ® Setup, you will no longer be able to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® or Audyssey Dynamic Volume ® . ( v p. 158 – 159) 0 “Manual Setup” can be used [...]

Speaker Config. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. o Front Set the front speaker size. Large (Default) : Use a large speaker that can adequately play back very low bass frequencies. Small: Use a small speaker that has inadequate playback capacity for very low bass frequencies. 0 [...]

o Surr. Back Set the presence, size and number of surround back speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the surround back speakers are not connected. 2 spkrs (Default) : U[...]

Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. o Unit Set the unit of distance. Feet (Default) Meters o Step Set the minimum variable width of the distance. 1 ft (Default) / 0.1 ft 0.1 m / 0.01 m o Set Defaults The “Distances” settings are returned to the [...]

Levels Set the volume of the test tone to be the same at the listening position when it is output from each speaker. o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker. –12.0 dB – +12.0 dB (Default : 0.0 dB) 0 The set “Levels” are reflected [...]

Crossovers Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency. o Speaker Selection Selects how to set the crossover frequency. All (Default) : Sets the same crossover frequency for all speakers. Individua[...]

Bass Set subwoofer and LFE signal range playback. o Subwoofer Mode Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer. LFE+Main: The low range signal of all channels is added to the LFE signal output from the[...]

Front Speaker Set the front speaker A/B to use for every sound mode. A (Default) : Front speaker A is used. B : Front speaker B is used. A+B : Both front speakers A and B are used. This can be set when “Assign Mode” is set to “Front B”. ( v p. 188) Contents Connections Playback Settings Tips Appendix 195 Front panel Display Rear panel Remot[...]

Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to[...]

Wi-Fi Setup Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. o Scan Networks Select the network you wish to connect to from the list of possible networks shown on the TV screen. 1. Select the network you wish to connect to from the list of wirele[...]

o WPS Router Use a WPS-compatible router to connect. There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router. n When connecting using the push button method 1. Select “Push Button” on the TV screen. 2. Switch to the WPS mode by pressing the WPS button of the router yo[...]

Settings Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit. 0 Set up the IP Address, Subnet Mask, Default Gateway an[...]

o Proxy Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. On(Address): Select when inputting by address. On(Name): Select when inputting by domain name. Off (Default) : Disables the[...]

Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list. When you select “Other”, you can change the Friendly Name according to your preferences. Home Theater / Living Room / Family Room / Guest Room / K[...]

Maintenance Mode Use when receiving maintenance from a Marantz service engineer or custom installer. Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE Only use this function if so instructed by a Marantz serviceperson or installer. Contents Connections Play[...]

General Make various other settings. Language Set the language for display the menu on the TV screen. English / Français / Español (Default : English) “Language” can also be set up by the following operation. However, the menu screen is not displayed. Watch the display while configuring the settings. 1. Press and hold the main unit’s ZONE2 [...]

o Power On Default Set the mode to ECO when the power is on. Last (Default) : The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”. Auto: When power is turned on, the mode will always be switched to the ECO Mode in “Auto”. Of[...]

ZONE2 Setup Configure the settings for audio playback on ZONE2. Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale” ( v p. 157). o Lch Level Adjust the left channel output level. -12 dB – +12 dB (Default : 0 dB) o Rch Level Adjust the right channel output level. -[...]

o Mute Level Set the amount of attenuation when muting is on. Full (Default) : The sound is muted entirely. –40 dB : The sound is attenuated by 40 dB down. –20 dB : The sound is attenuated by 20 dB down. This can be set when “Volume Level” is set to “Variable”. ( v p. 205) Zone Rename Change the display title of each zone to one you pre[...]

Trigger Out Select the conditions for activating trigger out. For details about how to connect the TRIGGER OUT jacks, see “DC OUT jack” ( v p. 55). n When setting for zone (MAIN ZONE/ZONE2) Trigger out is activated through linkage to the power of the zone set to “On”. n When setting for input source Trigger out is activated through linkage [...]

Information Show information about this unit settings, input signals, etc. o Audio Show the audio information for MAIN ZONE. Sound Mode: The currently set sound mode. Input Signal: The input signal type. Format: The number of input signal channels (presence of front, surround, LFE). Sample Rate: The input signal’s sampling frequency. Offset: The [...]

o Notifications Displays and sets notifications. Also, sets whether or not to display the notification when the power is turned on. Notification Alerts On (Default) : Notification messages are displayed. Off: Notification messages are not displayed. Press INFO on the remote control unit to display current source name, volume, sound mode name, and o[...]

Firmware Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for updates and upgrades. o Update Updates the firmware of this unit. Check for Update: Checks to see if the firmware is the latest version. You can also check approximately how long it will take to comp[...]

o Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. Upgrade Start: Execute the upgrade process. When the upgrade starts, the menu screen is shut down. During the upgrad[...]

Setup Lock Protect settings from inadvertent changes. o Lock On: Turn protection on. Off (Default) : Turn protection off. When cancelling the setting, set “Lock” to “Off”. NOTE When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”. Contents Connections Playback Settings Tips Appendix 212 Front panel [...]

Limiting the operating zone with the remote control . CBL /SA T GAME DVD AUX1 MEDIA PLAYER Blu-ray TV A UD I O iPod/ USB Bluetooth TUNER INTERNET RAD IO ONLINE MUSIC AUX2 CD BACK ENTER SOUND MODE TUNE + - TUNE SMART SELECT 1234 PURE MOVIE GAME MUSIC INFO OPTION CH / PA GE VOLUME MUTE ECO ZONE SELECT SLEEP MAIN POWER ZONE 2 SETUP ZONE2 SETUP ZONE2 o[...]

o Contents Tips I want the volume not to become too loud by mistake 215 I want to keep the volume at the same level when I turn the power on 215 I want to have the subwoofer always output audio 215 I want to make human voices in the movies clearer 215 I want to keep bass and clarity during playback at a lower volume level 215 I want to automaticall[...]

Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. ( v p. 157, 205) I want to keep the volume at the same level when I turn the power on 0 By default, the [...]

I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one. 0 Perform Audyssey ® Setup. This automatically makes the optimized speaker settings for the new listening environment. ( v p. 178) I want to combine a desired video with the current music 0 Set “Video Se[...]

Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If the symptoms do not match any of those desc[...]

o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 56 Power automatically turns off. 0 The sleep timer is set. Turn on the power again. 131 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operat[...]

o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 8 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. 8 0 Remove any ob[...]

o No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. 0 Check the connections for all devices. 28 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected.Check tha[...]

o Desired sound does not come out Symptom Cause / Solution Page The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 157 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. － No sou[...]

Symptom Cause / Solution Page Dolby PL g mode or DTS Neo:6 mode cannot be selected. 0 It cannot be selected when “Speaker Config.” - “Center” or “Surround” is set for “None”. 189 0 Dolby PL g or DTS Neo:6 cannot be selected when using headphones. － Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® cannot[...]

o Sound is interrupted or noise occurs Symptom Cause / Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. － 0 The network communication speed is slow or the radio station is busy. － When [...]

o No video is shown on the TV Symptom Cause / Solution Page No picture appears. 0 Check the connections for all devices. 40 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Match the input settings to the input connector of the TV con[...]

o The menu screen is not displayed on the TV Symptom Cause / Solution Page The menu screen or status information screen is not displayed on the TV. 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on [...]

o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 48 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable. － The AirPlay icon ' is not displa[...]

o USB memory devices cannot be played back Symptom Cause / Solution Page “No connection” is displayed. 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 48 0 Mass storage class compatible USB memory devices are supported. － 0 This unit does not support a connection through a USB hub. Connect t[...]

o File names on the iPod/USB memory device are not displayed properly Symptom Cause / Solution Page The file names are not displayed properly (“...”, etc.). 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. － o Bluetooth cannot be played back Symptom C[...]

o The Internet radio cannot be played back Symptom Cause / Solution Page A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 52 0 Perform the network diagnostic mode. － Internet Radio cannot be played. 0 The selected radio station is broadcasting[...]

o Music files on PC or NAS cannot be played back Symptom Cause / Solution Page Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. 241 0 Files that are copyright protected cannot be played on this unit. － 0 The set’s USB port cannot be used for connection to a computer. － [...]

o The HDMI control function does not work Symptom Cause / Solution Page The HDMI control function does not work. 0 Check that “HDMI Control” in the menu is set to “On”. 166 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the HDMI control fun[...]

o Cannot connect to a wireless LAN network Symptom Cause / Solution Page Cannot connect to the network. 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit. 198 0 Shorten the distance from the wireless LAN access point and remove any [...]

Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. . X ZONE2 SOUR CE M-D AX 1 Turn off the power using X . 2 Press X while simultaneously pressing M-DAX and ZONE2 SOURCE. 3 Remove your fingers from the two b[...]

About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, wh[...]

0 Auto Lip Sync This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. 0 HDMI Pass Through Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.[...]

o Supported audio formats 2-channel Linear PCM 2-channel, 32 kHz – 192 kHz, 16/20/24 bit Multi-channel Linear PCM 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby TrueHD / Dolby Digital Plus / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express o Supported video signals 0 480i 0 480p 0 576i 0 576p 0[...]

Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV. The main zone video conversion function is compatible with the following formats: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60. Video device Output This unit Input (IN) Output (MONIT OR OUT) HDMI signal[...]

This unit can convert the input video signals to the resolution that is set for “Resolution” ( v p. 170) in the menu before outputting them to the TV. Output signal Input signal HDMI 480i/576i 480p/576p 720p 1080i 1080p 1080p 24Hz 4K 30/25/24Hz 4K 60/50Hz HDMI 480i/576i P P P P P P P 480p/576p P P P P P P 720p P P P P P 1080i P P P P P 1080p 24[...]

Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then[...]

o Maximum number of playable files and folder The limits on the number of folders and files that can be displayed by this unit are as follows. Media Item USB memory device Memory capacity FAT16 : 2 GB, FAT32 : 2 TB Number of folder directory levels z 1 8 levels Number of folders 500 Number of files z 2 5000 z 1 The limited number includes the root [...]

Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC[...]

Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA (Windows Media Audio) 32/44.1/48 kHz 48 – 192 kbps .wma MP3 (MPEG-1 Audio Layer-3) 32/44.1/ 48 kHz 32 – 320 kbps .mp3 MPEG-4 AAC 32/44.1/48 kHz 16 – 320 kbps .aac/ .m4a/ .mp4 Personal memory plus function The most recently used se[...]

Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” ( v p. 189). Sound mode ( v p. 118) Channel output Front L/R Center Surround L/R Surround back L/R Front height L/R Subwoofe[...]

Sound modes and surround parameters Sound mode ( v p. 118) Surround Parameter ( v p. 152) Dialog Level Adjust ( v p. 151) Subwoofer Level Adjust ( v p. 151) Cinema EQ ( v p. 152) Loudness Management z 1 ( v p. 152) Dynamic Compression z 2 ( v p. 153) Low Frequency Effects z 3 ( v p. 153) Height Gain z 4 ( v p. 155) Direct/Pure Direct (2-channel) z [...]

Sound mode ( v p. 118) Surround Parameter ( v p. 152) Tone z 7 ( v p. 114) Audyssey ( v p. 158) M-DAX z 10 ( v p. 156) Pro Logic g / g x Music mode only Neo: 6 Music modes only Panorama ( v p. 154) Dimension ( v p. 154) Center Width ( v p. 154) Center Image ( v p. 154) MultEQ ® XT z 8 ( v p. 158) Dynamic EQ z 9 ( v p. 159) Dynamic Volume z 9 ( v p[...]

z 1 This item can be selected when a Dolby TrueHD signal is played. z 2 This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played. z 3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 4 This setting is available when the set sound mode name contains “+PL g z”. z 5 During playback in[...]

Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. Sound mode ( v p. 118) NOTE 2-channel signal Multi-channel signal Analog /PCM Dolby Digital (+/HD)/ DTS (-HD) PCM Multi DTS-HD DTS Express DTS ES DSCRT 6.1 DTS ES MTRIX 6.1 DTS Dolby TrueHD Dolby Digital Plus Do[...]

Sound mode ( v p. 118) NOTE 2-channel signal Multi-channel signal Analog /PCM Dolby Digital (+/HD)/DTS (-HD) PCM Multi DTS-HD DTS Express DTS ES DSCRT 6.1 DTS ES MTRIX 6.1 DTS Dolby TrueHD Dolby Digital Plus Dolby Digital EX Dolby Digital Multi Ch In Multi Ch In F Multi Ch In + Dolby EX z 1 S Multi Ch In + PL g x z 1 z 2 S Multi Ch In + PL g z z 3 [...]

z 1 This item can be selected when surround back speakers are used. z 2 The “Cinema” mode or “Music” mode can be selected. When using a single surround back speaker, the “Music” mode is used. z 3 This item can be selected when front height speakers are used. z 4 The “Cinema” mode or “Music” mode can be selected. z 5 The “Cinem[...]

Explanation of terms o Audyssey Audyssey Dynamic EQ ® Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ ® works in tandem with Audyssey MultEQ ® XT to provide well-balanced sound for every listener at any volume level. Audyssey Dynam[...]

Dolby Digital Plus Dolby Digital Plus is an improved Dolby Digital signal format that is compatible with up to 7.1-channels of discrete digital sound and also improves sound quality thanks to extra data bit rate performance. It is upwardly compatible with conventional Dolby Digital, so it offers greater flexibility in response to the source signal [...]

Dolby Pro Logic g z Dolby Pro Logic g z introduces a new dimension to Home Entertainment through the addition of a pair of front height channels. This supports various sources such as 2-channel sources and 7.1/5.1 multi-channel sources. By adding height speakers to the upper left and right locations in the front of the listening environment, you ca[...]

DTS-ES™ Discrete 6.1 DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder. DTS-ES™ Matrix 6.1 DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surro[...]

o Audio ALAC (Apple Lossless Audio Codec) This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data. FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Code[...]

MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. WMA (Windo[...]

o Video ISF ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance. Progressive (sequential scanning) This is a scanning system of the vide[...]

TKIP (Temporal Key Integrity Protocol) This is a network key used for WPA. The encryption algorithm is RC4, the same as for WEP, but the security level is increased by changing the network key used for encryption for each packet. vTuner This is a free online content server for Internet Radio. For inquiries about this service, visit the vTuner site [...]

Network Names (SSID: Security Set Identifier) When forming wireless LAN networks, groups are formed to prevent interference, data theft, etc. These groups are based on “SSID (network names)”. For enhanced security, a WEP key is set so that communication is unavailable unless both the “SSID” and the WEP key match. This is suitable for tempor[...]

o Others App Store App Store is a site that sells application software for such devices as the iPhone or iPod Touch, and is operated by Apple Inc. HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization. ZONE2 This unit can operate i[...]

Trademark information . “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and r[...]

. Manufactured under a license from U.S. Patent No’s: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product i[...]

Specifications o Audio section 0 Power amplifier Rated output: Front: 100 W + 100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 100 W+100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08[...]

o Video section 0 Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB 0 Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms P B / C B signal — 0.7 Vp-p, 75 Ω/ohms P R / C R signal — 0.7 Vp-p, 75 Ω/ohms Frequency response[...]

o Wireless LAN section Network type (wireless LAN standard): Conforming to Wi-Fi ® z 1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz No. of channels: 1 – 11 ch z 1 The Wi-Fi ® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. Contents Conne[...]

o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx. 32.8 ft/10 m in line of sight z 2 Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution[...]

o Dimensions (Unit : in. (mm)) . 6 1/2 (165) 2 33/64 (64) 2 23/32 (69) 17 21/64 (440) 33/64 (13) 5 53/64 (148) 6 11/32 (161) 9 1/16 (230) 11 47/64 (298) 13 5/8 (346) 5/8 (16) 1 17/64 (32) 13 25/64 (340) 1 31/32 (50) 1 31/32(50) 2 11/64 (55) o Weight : 22 lbs 11oz (10.3 kg) Contents Connections Playback Settings Tips Appendix 266 Front panel Display[...]

Index v Numerics 3D ................................................................ 234 4K ................................................................ 234 5.1-channel .................................. 27, 32, 35, 36 7.1-channel ........................................ 27, 33, 34 v A Accessories ...............................................[...]

v D Direct sound mode ....................................... 125 Display ........................................................... 16 DLNA ........................................................... 256 Dolby sound mode ............................... 122, 250 DTS sound mode ................................. 123, 252 v E ECO Mode ...............[...]

v R Random playback .................................. 64, 108 Rear panel ...................................................... 18 Remote control unit ........................................ 21 Remove from Favorites ................................ 110 Repeat playback .................................... 64, 108 Resetting factory settings .......[...]

License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. o Boost http://www.boost.org/ Boost Software License – Version 1.0 – August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying [...]

Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License. “Derivative Work” means a work based upon the Work or upon the Work and oth[...]

You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this [...]

No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent. This License constitutes the entire agreement between the parties with respect to the Work licensed herein. There are no understandings, agreement[...]

0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 0 Neither the name[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE[...]

o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the[...]

. D&M Holdings Inc. 3520 10338 00AM 277[...]