Miele CS1212 инструкция обслуживания

Operating and Installation Instructions Ceramic combiset with Induction CS 1212 CS 1221 To prevent accidents and machine damage, read the Operating Manual before installation or use. M.-Nr. 07 353 950 e n-C A[...]

IMPORTANT SAFETY INSTRUCTIONS .................................4 Description of the unit ..............................................9 CS 1212 ..........................................................9 CS 1221 .........................................................1 0 Display ..........................................................1 1 Burner[...]

SAFETY INSTRUCTIONS FOR INSTALLATION .........................3 0 Installation ......................................................3 3 Installation dimensions .............................................3 4 CS 1212 ......................................................3 4 CS 1221 ......................................................3 5 C u to u[...]

WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance.[...]

Technical Safety ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Before installing the combiset, check for externally visible damage. Do not operate a damaged appliance. ~ To guarantee the electrical safety of this a[...]

~ Do not cook on a broken combiset. Any breakages or cracks in the ceramic surface of the appliance are defects and must be treated as such. If the combiset should break, cleaning solutions and spills may penetrate the broken combiset and create a risk of electric shock. Do not use the appliance until it has been repaired. Safety ~ Individuals with[...]

~ Do not store items on the appliance when not in use. Items could melt or catch fire from residual heat or if the appliance is turned on inadvertently. Always switch the cooking zone(s) off after use. ~ Flammable materials should not be stored on or near the appliance. ~ The combiset is fitted with a cooling fan. Drawers under the combiset are not[...]

~ Pot and pan handles should be turned inward and not extend over the countertop to reduce the risk of burns, ignition of flammable materials, and spills. ~ Do not use pots or pans with pronounced edges or ridges on the ceramic combiset. These could scratch the combiset permanently. See "Cookware" for more information. Grains of salt and [...]

CS 1212 a Burner with double booster (BI/II) b Burner with single booster (BI) c Display d Cooking zone indicators e Indicators Control knobs for the burners: f rear g front Indicators l On/Off indicator m Booster indicator n "Residual Heat" indicator Description of the unit 9[...]

CS 1221 a Burner with double booster b Display c Indicators d Control knob Indicators l On/Off indicator m Booster indicator n "Residual Heat" indicator Description of the unit 10[...]

Display ß = No pan on burner or pan is unsuitable A = Auto-heat F = Fault (see "Frequently asked questions") C / 0 = Safety cut-out feature (see "Safety features") I = Booster I activated II = Booster II activated H = Overheating protection (see "Safety features") L = Child safety lock (see "Safety features"[...]

Clean the combiset ^ Before using for the first time, clean the appliance with a damp cloth and dry with a soft cloth. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Heat the appliance When the combiset is first connected to the power supply and after a power failure, all indicators in the display w[...]

How it works An induction coil is located under the burner. When the burner is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The burner itself is heated indirectly by the heat given off by the pan. Induction burners only work when a magnetic based pan is placed on it (see "Cookwa[...]

Noises When using an induction burner, the following noises can occur in the pan, depending on what it is made of and how it is constructed. – Higher power settings may cause a buzz. This will decrease or cease altogether when the power setting is reduced. – If the pan base is made of layers of different materials (e.g. a sandwiched base), a cr[...]

Cookware Suitable pans include: – stainless steel pans with a magnetic base – enameled steel pans – cast iron pans Unsuitable pans: – stainless steel pans without a magnetic base – aluminum and copper pans – glass, ceramic or earthenware pots and pans To test whether a pot or pan is suitable for use on an induction combiset, hold a magn[...]

Turning the combiset On/Off , Do not leave the appliance unattended while in use. To turn the combiset on turn the control knob clockwise a to the desired power level. To turn the combiset off turn the control knob counterclockwise b to "0". The knob must only be turned clockwise to turn the burner on and counterclockwise to turn the burn[...]

Settings Use for Power level* Melting butter, chocolate, etc. Dissolving gelatin Prepare yogurt 1-2 Warming small quantities of food or liquid Keeping delicate dishes warm Cooking rice, Thawing frozen vegetables 1-3 Warming liquid or half-set foods Thickening sauces, e.g., hollandaise sauce Cooking rice pudding 2-4 Defrosting frozen foods Steaming [...]

Auto-heat When Auto-heat has been activated, the burner switches on automatically at the highest setting and then switches to the continued power level which was selected. The "heat-up" time depends on which continued power level has been chosen (see table). Continued power level* Heat-up time (approx.) min : sec 1 0:1 5 2 0:1 5 3 0:2 5 4[...]

Booster function The burner is equipped with a booster function to temporarily increase the power level. This boost is intended to quickly bring large quantities of water to the boil, e.g. cooking pasta. When the Booster is activated the burner will operate with extra power for 10 minutes. Once the booster time has elapsed the burner will automatic[...]

Keep warm This function can be used for keeping food warm right after it has been cooked. It is not for reheating food which has already cooled. Once activated the keep warm function will switch off automatically after 2 hours. Tips – Cover the pan with a lid. – It is not necessary to stir the food while it is being kept warm. – Nutrients are[...]

Child Safety Lock Keep children away from the combiset for their own safety. The combiset has a Child Safety Lock to prevent children from turning on the burner. To activate the Child Safety Lock: ^ Turn the control knob counterclockwise as far as it will go, and hold until L appears in the display. If the control knob is touched after the lock is [...]

Overheating protection The induction coils and the cooling element of the electronics are fitted with an overheating protection feature. This prevents the induction coils and cooling element from overheating. This mechanism works in the following ways: – If the booster function is being used, it will be switched off. – The power level will be r[...]

Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit. Pressurized steam could cause permanent damage to the surface and to components for which the manufacturer cannot accept responsibility. Do not use any sharp pointed objects which could damage the seal between the ceramic surfa[...]

Stainless steel Clean stainless steel surfaces with warm water and liquid dish soap applied with a non-abrasive sponge and then wipe dry with a soft cloth. Soak baked or hardened spills first to loosen them. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent resoiling, a cond[...]

, Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work. What if the burner does not heat up after it is turned on? Possible fault Solution The Child safety[...]

What if the combiset turns itself off automatically? Possible fault Solution Either the "Safety cut-out" feature or the "Overheating protection" feature has been activated. See "Overheating protection" or "Safety cut-out". What if one of the following errors occurs: - The booster function turns off automatica[...]

In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. This information is visible on the silver data plate supplied with the appliance. Technical Servi[...]

28[...]

Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and machine damage read these instructions before installation or use.[...]

Note to the installer: Please leave this instruction book with the consumer for the local electrical inspector’s use. The minimum distances given in these Installation Instructions must be observed in order to ensure safe operation. Failure to do so increases the risk of fire. The cabinetry and venting hood should be installed first to prevent da[...]

Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset ([...]

Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of at least 2" (50 mm) must be kept between the countertop cut-out and the rear wal[...]

Safety distance when installing the appliance near a wall with trim or a back splash A minimum distance of 2" (50 mm) between the trim or back splash and the countertop cut-out if required. This distance is only necessary if these items are made of combustible materials e.g. wood. If the trim or back splash is made of a non-combustible materia[...]

Installation dimensions CS 1212 a Spring clips b Appliance front c Installation height d Power supply box with connection cable Installation 34[...]

CS 1221 a Spring clips b Appliance front c Installation height d Power supply box with connection cable Installation 35[...]

Cut out ^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the appliance(s). See also "SAFETY INSTRUCTIONS FOR INSTALLATION". ^ Seal the cut surfaces with a suitable sealant to avoid swel[...]

Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out two appliances For the installation of two appliances the width of the countertop cut-out D is the sum of A and C. A , B and C = appliance widths 11 5 / 16 ", 15" or 22 11 / 16 [...]

Sample calculations for a countertop cut-out for three appliances A appliance width minus 5 / 16 "( 8m m ) B appliance width C appliance width minus 5 / 16 "( 8m m ) D Countertop cut-out 11" (280 mm) 11 5 / 16 " (288 mm) 11" (280 mm) 33 3 / 8 " (848 mm) 11" (280 mm) 15" (380 mm) 14 5 / 8 " (372 mm) 40 5 [...]

a Spring clips b Support bars c Space between support bar and countertop An additional support bar is required for each additional appliance. The position for attachment of an additional spacing strip depends on the width of the appliance B . Installation 39 A B C b a a D a a a a (280/372/568mm) c c (25-30mm) 3/16" 1"-1 (500 mm) + - 1 2&q[...]

Attach the spring clips and support bars Wood or solid surface countertops ^ Place the supplied spring clips a and the support bars b at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 1 / 8 " x 1" (3.5 x 25 mm) screws (supplied). Granite countertop ^ Position and attach[...]

^ Coat the edges of the spring clips a , ^ and the space d between the strips b and the countertop with silicone (supplied). Installation 41 b d a[...]

Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is[...]

Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. Tiled surfaces The grou[...]

, CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power supply or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by [...]

Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled. Please contact [...]

46[...]

47[...]

Alteration rights reserved / 4608 For the most updated manual see the Miele web site. M.-Nr. 07 353 950 / 00[...]