Miele DA 289-3 инструкция обслуживания

Operating and installation instructions V entilation System D A 289-3 T o pr event accidents and machine damage, read these instructions before installation or use. UV 05 853 730 M.-Nr .[...]

IMPORT ANT SAFETY INSTR UCTIONS Functional description Guide to the hood Operation Main power switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 T urning on the fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Selecting the power level .[...]

Read these Operating Instructions carefully bef ore installing or using the V entilation System. This appliance is intended for residential use only . Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. This appliance complies with current safety requir ements.[...]

This equipment is not designed for maritime use or for use in mobile installations such as caravans or air - craft. However , under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele T ech - nical Service Department with specific requir ements. Before servicing or cl[...]

, W ARNING - T O REDUCE THE RISK OF A RANGE T OP GREASE FIRE: Never leave surface units unat - tended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. Always turn hood "ON" when cook - ing at high heat or when cooking flaming foods. Clean ventilating fans frequently . [...]

Installation , W ARNING T o reduce the risk of fire, use only metal ductw ork. When installing the hood, make sure that a minimum safety dis - tances of 14 3 / 8 " is maintained between a Miele cooktop and the bottom of the hood. If local building codes requir e a greater safety distance, follow their requir e - ment. For non-Miele cooking app[...]

The ventilation hood works by air ex - traction. The air is drawn in through the air intake panel, cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap . This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur . When the hood is turned on, the [...]

Guide to the hood 8[...]

a Chimney e xtension b Chimney c Canopy d Control panel e Overhead lighting f Main power s witch g Grease filter h Air intake panel i Light button This button turns the light on and off and also dims the light. The lighting can be used independently of the fan. j On/Off button k Fan po wer selection Four fan speed selection l Delay ed shut down Thi[...]

Main power s witch ^ Remove the air intake panel to ac - cess the main power switch (see "Cleaning and Care"). ^ Press the main power switch to "I". The fan and lighting are r eady to use. If the appliance is not going to be used for a long period of time (e.g. while va - cationing) it should be turned off at the main power swit[...]

Delay ed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be se - lected to allow the hood to continue running for either 5 or 15 minutes. ^ Press the Delayed Shut Down button while the fan is still running. Press once = 5 minute delay (left indicator lights) Press twice = 15 minu[...]

Grease filter timer A timer monitors the hours of fan opera - tion. The indicator for the grease filter will light after 30 hours of operation. The grease filter and air intake panel must then be cleaned. After the grease filter has been cleaned and put in place, the grease filter timer must be reset. ^ T o do this, press the grease filter but- ton[...]

Reprogramming the grease filter timer The grease filter timer is pr eset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be pro - grammed in kitchens with frequent pan or deep frying. – A time of 20 hours should also be programmed if the kitchen is only used occasionally to prevent gr[...]

Grease filter and air intake panel The reusable metal gr ease filter re - moves solid particles from the vented kitchen air (grease, dust, etc). The grease filter and the air intake panel should be cleaned every 3 - 4 weeks or whenever the grease filter in - dicator lights. Keep the grease filter clean to pr e- vent a fire hazar d. Removing the air[...]

^ Clean the filter - by hand: use a scrub brush in warm water with a mild detergent. - in a dishwasher: place the filters in the lower basket, making sure that the spray arm is not blocked. Depending on the detergent, clean - ing the grease filter in a dishwasher may cause permanent discoloration of the filter surface. Per formance of the filter wi[...]

Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet or man - ually "tripping" the circuit br eaker . Cleaning the casing , Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. They will damage the surface. ^ The air [...]

Changing the light bulbs Before changing the light bulbs, dis - connect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit br eaker . When in use halogen bulbs become extremely hot, and they can burn your hands. Do not attempt to change the bulbs until they have had sufficient tim[...]

In the event of a fault which you cannot correct yourself please contact: – Y our Miele Dealer or – The Miele T echnical Service Department USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca When contacting the T echnical Service Department, please quote the model and serial number of your appliance. These are shown on[...]

Installation instr uctions[...]

Caring for the en vir onment Installation accessories Plyw ood backing Electrical data Appliance dimensions Installation Installation instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Dismantling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Disposal of packing material The cardboar d box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of childr en. Danger of suffocation! Disposal of an old appliance Old a[...]

Installation accessories 22[...]

a 3 protective shields prevent scratches to the chimney dur - ing installation. b Upper retaining plate secures the chimney extension. c Middle retaining plate for addi - tional stability of the chimney . d 2 hose clips for securing the ducting. e 1 reducing collar for use with 5" (125 mm) exhaust ducting. f 1 non-return flap for vented air ex[...]

The majority of the weight of the in - stalled ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the r e - quired locations, a plywood backing (min. 1 / 2 " (13 mm) thick) spanning at least two studs must be installed. Failure to a[...]

All electrical work should be per - formed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The manufactur er can not be held responsible for unautho - rized work. Ensure that power to the appliance is OFF while installation or[...]

Appliance dimensions 26[...]

Cut out area in wall or ceiling for entrance of 6" (150 mm) ductwork or 5" (125 mm) ductwork with a reducing collar . Standard unit height H = 37 13 / 16 " - 51 15 / 16 " (960 – 1320 mm) Distance S above the cooktop Do not install this exhaust hood over cooktops burning solid fuel. When installing the hood, make sure that the [...]

Installation instruction See the enclosed installation instruction sheet. Please read the "Important Safety In - structions" and Installation instructions before installing this hood. Protective film The casing is covered by a pr otective film to prevent scratches during trans - port. Peel off the film befor e installing the casing parts.[...]

, W ARNING Danger of toxic fumes. Gas cooking appliances release carbon mono xide that can be harmful or fatal if inhaled. The exhaust gases extracted b y the hood should be vented out - side of the building onl y . Do not terminate the exhaust ducts in attics, garages, crawlspaces, etc. T o reduce the risk of fire, onl y use metal ductwork. Please[...]

– If the exhaust is ducted into an inac- tive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney , dryer vent, vent flue, or room venting ductwork. Seek professional advice befor e connect- ing an exhaust hood vent to an exist - ing, inactive chimney or vent flue. Condensa[...]

31[...]

Alteration rights reserved /5002 This bio-friendly paper was bleached without the use of chlorine. 00 M.-Nr . 05 853 730 / V[...]