Miele KWT 4154 UG-1 инструкция обслуживания

Operating and installation instructions Under counter wine conditioning unit KWT 4154 UG-1 To avoid the risk of accidents or damage to the appliance, it is essential to read these operating instructions before it is installed or used for the first time. M.-Nr. 07 057 851 e n-G B[...]

Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching on and[...]

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 How to save energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

a On/Off button b Temperature display for upper zone c Temperature selector buttons for upper zone left hand button: warmer right hand button: colder d Constant humidity (Dynamic cooling) button and indicator light e Safety lock indicator light f Alarm "off" button g Temperature display for lower zone h Temperature selector buttons for lo[...]

a Interior lighting b Isolation shelf for thermal separation c Wooden shelf with décor strip for descriptive labels d Active charcoal filter e Condensate channel and drain hole To ensure the correct functioning of the appliance in tropical climates where the ambient temperature exceeds 38°C and air humidity levels exceed 70% the appliance must on[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old applia[...]

This appliance complies with all relevant local and national safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on the installa[...]

Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. ~ This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Care must be taken during transportation and setting up of the appliance that no parts of the cooling sy[...]

~ Installation work, maintenance and repairs may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held liable. Ensure current is not supplied to the appliance until after maintena[...]

Disposing of your old appliance ~ Before disposing of an old appliance, first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. ~ Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by – puncturing the refrigerant channels in t[...]

Before using for the first time ^ Clean the inside of the appliance and the accessories with warm water and a little washing up liquid, and then dry with a soft cloth. Switching on ^ Press the On/Off button so that the temperature displays light up. The alarm will sound. The appliance starts to cool down, and the interior lighting will come on when[...]

^ Press the constant humidity button to save the setting. The safety lock indicator light X will light up when the safety lock has been activated. ^ Press the On/Off button to come out of setting mode. If you do not do this the electronics will switch over to normal operation automatically after a couple of minutes. Switching off for longer periods[...]

Wine keeps on maturing depending on the surrounding conditions. The length of time for which wine can be kept in good condition will therefore depend on the temperature and air quality. Temperature Wine can be stored at a temperature between 5°C and 18°C. The optimum temperature is around 10-12°C. Most white wines can be consumed at this tempera[...]

Approx. 5 seconds after letting go of the button, the current temperature inside the applicable zone is automatically shown. The two temperature zones are cooled alternately, which means that depending on the quantity of wine being stored, it can take several hours for the required temperature to be reached, and for the temperature display to adjus[...]

^ Press the constant humidity button to save the setting. ^ Press the On/Off button to come out of the setting mode. If you do not do this the electronics will switch over to normal operation automatically after a couple of minutes. Humidity level It is very important to store wine in an atmosphere with a high humidity level (60-70 %) so that the c[...]

Switching off Because the appliance uses more energy when this setting is switched on, it should not be left switched on all the time. ^ To switch it off, press the constant humidity button m . The indicator light will go out. Air filtering with the active charcoal filter The active charcoal filters maintain the air quality in the wine conditioning[...]

There is lighting in both the upper and lower zones of the wine conditioning unit so that both zones can be lit up. Do not remove the lamp covers. Should the covers be damaged or need to be removed due to damage, exercise caution. There are lasers in the lighting (laser beam class 1M) which you should avoid looking at directly. Do not use optical i[...]

Any vibration or movement of the bottle can affect the wine by interrupting the natural respiration process and so impair the taste. As much as possible store bottles of the same type of wine beside each other on the same shelf. Removing a bottle of one type will then leave the other types undisturbed and will avoid the need to move different bottl[...]

Your appliance is fitted with a warning system which ensures that the temperature cannot rise or fall unnoticed and impair the wine. Temperature alarm An alarm will sound if the temperature in one of the zones rises or falls outside the temperature range. The relevant temperature display will flash at the same time. The temperature the appliance is[...]

Condensate and frost can build up on the back wall of the appliance whilst it is in use. These are automatically defrosted and removed by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the back of the appliance. Ensure that the condensate channel and drain hole are never blocked so that cond[...]

Make sure that water cannot get into the electronic unit or into the lighting. Do not let water get into the drainage channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance. Steam could reach the electrical components and cause a short circuit. The data plate located inside the appliance must not be removed[...]

Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seal should be cleaned regularly with[...]

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure current is not supplied to the appliance until after[...]

. . . the interior light is not working. ^ Call the Service Department. The LED lighting may only be repaired or replaced by a service technician. There are live electrical components under the cover. Danger of injury and damage. Do not remove the cover. If the cover is damaged or needs to be removed due to damage, exercise caution. There are laser[...]

Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]

Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high amb[...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]

All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensure that the connection data [...]

All electrical work should be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. The appliance is supplied with a mains cable and moulded plug ready for connection to 220-240 V 50 Hz supply. The voltage and frequency are given on the data plate. Please ensure that these match the house[...]

Location The appliance should be installed in a dry, well-ventilated room. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room, the more energy the appliance requires to operate. It should not be installed where it is exposed to direct sunlight or di[...]

Ventilation Air at the back of the appliance gets warm. The appliance housing unit must be constructed to allow sufficient space for ventilation. Miele kitchen units are designed to provide this ventilation. The air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis. Before installation ^ Before bui[...]

The appliance is supplied right hand hinged. If left hand door hinging is required, follow the instructions below. ^ Close the door, and unscrew the top hinge pin from the door a . ^ Unscrew the door stay b from underneath the door. ^ Tip the door forward slightly c , and lift it up and off d . ^ Unscrew the top hinge plate e , turn it around and r[...]

^ Swap over the plug h and the hinge pin guide i in the top of the door. ^ Hang the door on the lower hinge pin j , and close the door k . ^ Refit the top hinge pin l through the hinge pin plate into the door. ^ Refit the door stay m underneath the appliance by securing one screw into the appliance door and another through the plastic part of the h[...]

^ Align the appliance to the height of the niche by altering the adjustable feet using the spanner supplied. ^ Push the appliance into the niche. When doing this, make sure that the mains cable does not get trapped. Make sure that the socket and on-off switch are easily accessible after the appliance has been pushed underneath the worktop. Make sur[...]

Aligning the appliance to taller unit doors If adjacent furniture housing doors a are taller than the wine conditioning unit door, the wine conditioning unit can be aligned to the unit doors using a filler panel b . A bracket is required to secure the filler panel, which is available from the Miele Spare Parts Department or from your dealer. The fi[...]

Alteration rights reserved / 2612 KWT 4154 UG-1 M.-Nr. 07 057 851 / 06[...]