Miele WT 2679 I WPM инструкция обслуживания

Operating instructions Washer-dryer WT 2679 WPM T o av oid the risk of accidents or damage to the mac hine it is essential to rea d these instructions bef ore it is installed and used for the f ir st time. M.-Nr . 06 533 690 e n-G B[...]

Disposal of the packing material The tr ansport and protectiv e packing has been selected fr om materials which are en vironmentally friendl y for disposal and can normally be rec ycled. Ensure that an y plastic wr appings , bags etc. are disposed saf ely and kept out of the reac h of babies and young children. Danger of suf focation! Rather than j[...]

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contr ol panel [...]

Extr a option ......................................................3 6 Low t emperatur e ................................................3 6 Thermospin ....................................................3 6 Adding or r emoving laundr y af ter a progr amme has started .................3 6 P rogr amme chart .........................................[...]

Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 F r o n tv i e w ........................................................6 1 R e a rv i e w........................................................6 2 Installation surface .................................................6 3 Installing the[...]

~ It is essential to r ead these instructions . This w asher -dryer conforms to current saf et y requir ements . Inappropriat e use can, ho weve r , lead to per sonal injur y and damage to property . T o av oid the risk of accidents and damage to the w asher -dryer , please read these instru ctions carefully befor e using it for the f irst time . T[...]

Technical safety ~ Befor e set ting up the washer -dryer , chec k it for any e xternally visible damage. Do not install or use a damaged machine . ~ Befor e connecting the w asher -dr yer , ensure that the connection dat a on the data plat e (voltage and connect ed load) match the mains electricity supply . If in any doubt, consult a qualified elec[...]

~ This w asher -dryer may onl y be used in mobile installations su ch as ships if a risk assessment of the installation has been carried out by a suit ably qualif ied engineer . ~ In countries where there ar e areas which ma y be subject to infestation b y cockr oaches or other vermin, pay particular att ention to keeping the machine and its surr o[...]

~ T o pre vent the risk of fir e, the follo wing must not be dried in this w asher -dr yer: – items whic h have not been w ashed. – items , such as workw ear , which hav e not been thoroughl y cleaned and which ar e still soiled with grease, oil or other desposits (suc h as cosmetics , lotions etc). If items ha ve not been thoroughl y cleaned t[...]

~ Only use dy es specified b y the manuf acturer as being suit able for use in a domestic w ashing machine. Alw ays observe the manuf acturer's instructions carefull y . ~ Colour run and dye r emov ers contain sulphur compounds which can cause damage suc h as corrosion. Do not use these produ cts in this machine. ~ Make sur e that any dispensi[...]

Control panel a Start/Stop button F or starting the progr amme selected and cancelling a progr amme once it has started. b Display wit h–,O K ,+a n d Load/Detergent buttons See the follo wing page for mor e details . c m button F or selecting delay start and set ting the time of day . d PC / Optical interface This is used b y service technicians [...]

Display When a pr ogramme is select ed the display can be used t o select and change pr ogramme par ameters . - / + buttons F or altering the par ameters highlight ed in the display: - decreases the par ameter or mo ves the highlighting upw ards + increases the par ameter or mo ves the highlighting down war ds . OK button F or confirming the parame[...]

Befor e using the machine f or the fir st time ensure that it is corr ectly installed and connect ed. See "Installation and connection". Also chec k that the drain f ilter is secur ely tightened t o prev ent the risk of w ater leaks during use. The w asher -dryer has a sensor which measures the amount of laundr y in the drum. This det erm[...]

Reminder to remove transport struts T o av oid the risk of damage, the tr anspor t struts must be remo ved befor e the w asher -dr yer is used for the fir st time. See "Installation and connection" for instru ctions on how to do this . i Remove transport struts OK ^ Af ter remo ving the transport struts (if this has not already been done [...]

Energy and water consumption – W ater consumption and energy usage are det er mined by the siz e of the load. T o make the most out of y our machine , load the maximum dry load for the pr ogr amme you are using . – Use the Aut omatic and Express progr ammes for small loads . – When smaller amounts of laundr y are w ashed using the Cot tons pr[...]

Brief instructions The headings number ed A , B , C ,... show the oper ating sequence and can be used as brief instructions . Separate washing A Sort the laundry ^ Empt y all pock ets . , F oreign objects (e .g. nails , coins , paper clips , etc.) can cause damage to g ar ments and components in the machine . ^ Badly soiled ar eas , stains etc. sho[...]

B Switch the machine on The int erior drum lighting will come on. C Select a programme ^ Select the progr amme you w ant. The pr ogramme select ed will appear in the display . Minimum iron F urther progr ammes: When y ou tur n the progr amme selector to F urther progr ammes , a list of these progr ammes will appear in the display . E Dark garments [...]

^ Y ou can select any e xtras options with the e xtra option but tons . ^ Each press of the t op right hand but ton selects the e xtra option in the follo wing order: P re-w ash or Soak or no option is selected. Not all the e xtra options ar e suitable for use with ev er y w ash progr amme. Y ou can only select e xtr a options which are compatible [...]

E Add detergent The load siz e indicator display will be replaced with the det ergent percent age display . Detergent 75% A 40% Add slightl y less than half the amount recommended . . . 50% Add half the amount recommended . . . 60% Add slightl y more than half the amount recommended . . . 75% Add thr ee quar ter s of the amount recommended . . . 10[...]

F Start the programme ^ P ress the f lashing Start/Stop but ton. The estimat ed progr amme duration will count down in the display in one minut e steps . During the fir st 1 0 minutes the machine measur es how muc h w ater is being absorbed by the laundry . The progr amme dur ation may be longer or shorter depending on this absorbency ra te . The p[...]

Extra options Y ou can use the Extr a option but tons to augment the basic w ash progr ammes . Pre-wash F or lau ndry with large amounts of dirt (e.g . dust, sand). Soak F or heavily soiled and st ained items with prot ein stains (e.g . blood, fats and oils , cocoa). A length of time of bet ween 30 minut es and 6 hours can be c hosen, in 30 minute [...]

Adding or removing laundry after a programme has started Laundr y can be added or remo ved af ter the progr amme has started when using the follo wing progr ammes: – Cot tons – Minimum iron – Aut omatic – Express – Star ch ^ P ress the Door but ton t o open the drum door . , Warning: The water in the machine will be very hot and could cau[...]

Spinning The maximum f inal spin speed depends on the progr amme chosen. Programme rpm Cot tons 1 600 Minimum iron 1 200 Delicates 600 Silks 400 W oollens 1 200 Express 1 600 Automatic 1 200 Dark g ar ments 1 200 Shirts 600 Denim 900 Sportswear 1 200 Outerw ear 800 P roofing 1 000 Curtains 600 Separ ate rinse 1 200 Starc h 1 500 Dr ain/Spin 1 600 Y[...]

Programme chart Cottons 30°C to 95°C 9876 max. 5.0 kg F abric type Cot tons , linens or cott on mix fabrics . Extr a options P re-w ash or Soak, Short, W ater plus Deter gent P owder det ergent, deter gent for coloured f abrics , liquid deter gent, t ablet detergent and liquid t ab deter gent. Minimum iron 30°C to 60°C 876421 max. 2.5 kg F abri[...]

Silks / cold to 30°C c max. 1.0 kg F abric type Silks and other handw ashable fabrics with no wool cont ent, e .g. satin, lace and silk. Note Place socks , tights , br as etc. in a w ashing bag. Extr a option W ater plus Deter gent Liquid deter gent for delicates . Woollens / cold to 40°C ac max. 2.0 kg F abric type Machine-w ashable or hand-w as[...]

Automatic cold to 40°C 7621 max. 2.5 kg F abric type Mix ed loads of garments suitable for the Cot tons and Minimum iron pr ogrammes . Sort according to colour . Extr a option P re-w ash or Soak, Short, W ater plus Deter gent P owder det ergent, deter gent for coloured f abrics , liquid deter gent. Dark garments cold to 40°C max. 2.5 kg Garment D[...]

Proofing 40°C max. 3.0 kg Item F or treating microf ibre f abrics , skiwear , fine , close weav e cot ton garments (poplin) or tablecloths t o pro vide a wat er and dir t resist ant finish. Notes – The it ems should be freshly w ashed and spun or dried befor e proof ing. – F or best results , the items should be heat-tr eated af terw ards , ei[...]

Programme sequence Main wash Rinses Spinning Wa te r lev el W ash rhythm Wa te r leve l Rinses Spinning Final spin Cot tons d a ( 2-3 2) LL Minimum iron d a ( 2-3 3) LL Delicates e b e 3 – L Silks e d e 2 – L W oollens ( c ( 2 LL Express d a ( 2-3 3) LL Aut omatic ( a ( 2-3 3) LL Dark g ar ments ( a ( 3 LL Shirts ( a ( 2 – L Denim ( a ( 3 –[...]

This w asher -dryer has fully electr onic controls with aut omatic load recognition. It takes in the right amount of w ater requir ed for the progr amme depending on the amount of lau ndry and its absorbency r ate . This means that progr amme cycles and dur ations can v ar y . The pr ogramme sequ ences outlined in the chart are based on the basic p[...]

Garment care label symbols / Hand w ash (If no temper ature is specified use the lo west temper ature or cold) h Do not w ash apf Dry clean D Do not dry clean x Any oxidising bleac hing agent can be used { Only use an o xygen based bleach or a non-c hlorine bleach z Do not bleach Tumble dry q At normal temper ature r At low t emperatur e s Do not t[...]

The right amount to dispense will depend on the following: – The soiling le vel of the laundr y Lightly soiled No visible dirt or stains . Normally soiled Visibl y dir ty and/or just a few slight stains . Heavil y soiled Stains and soiling clearl y visible. – The w ater har dness level. Check with y our local wat er supplier if you do not kno w[...]

Fabric conditioners or liquid starch F abric conditioner s make garments sof t to handle and help pr event static cling when tumble drying. Star ch stif fens and gives body t o items of laundr y , e.g. shir ts , tablecloths and bed linen. ^ Dispense according t o the amou nt specified on the pac kaging. Automatic dispensing of fabric conditioner or[...]

Separate drying The separ ate drying progr amme must be used if the load in the w ash progr amme is great er than the maximum load permitt ed for drying, or if you onl y want t o dr y part of the load that w as washed. ^ Befor e drying check the drying symbol on the car e label. q Dr y at normal temper ature r Dr y at a low t emperatur e (select th[...]

A Sort the laundry ^ Sort the lau ndry according to type of fibre / w eave and the r esidual moisture cont ent. T his will help achie ve an ev en drying result. B Switch the machine on The int erior drum lighting will come on. C Select a programme ^ T urn the selector to the drying progr amme you r equire . The pr ogramme select ed will appear in t[...]

D Load the drum ^ Open the drum door . ^ Load the laundr y loosely int o the drum. Do not ov erload the drum. See the "P rogr amme chart" in the "Dr ying" section for recommended loads f or each progr amme. Ov erloading can cause unnecessar y wear and t ear to the laundr y and give a disappointing drying result. E Close the drum[...]

Extra option Low temperature The t emperatur e is reduced during the drying progr amme. F or all delicate or minimum iron f abrics with the r symbol on the car e label (e.g . acrylic garments). With the e x ception of the Express progr amme, the ther mospin is not carried out when the Low t emperatur e e xtra option has been select ed. Because the [...]

Programme chart Cottons max. 2.5 kg* Extra dry, Normal+, Normal**, Timed drying 1) F abric type Single and multi-lay ered cot ton f abrics such as t owelling , jerse ywear , underwear , flannelet te bed linen. Note Do not use Extr a dr y for jerse y fabrics as the y hav e a tendency to shrink. Extr a options Low t emperatur e, ther mospin max. 1 60[...]

Delicates max. 1.0 kg* 8 minutes F abric type F or delicate f abrics made of synthetic fibr es , mix ed fibres , eas y care cot ton shirts and blouses . Note This pr ogramme is for "loosening" up f abrics . The y are not completel y dried in this progr amme. Remov e garments imme - diatel y at the end of the progr amme. Woollens max. 1.0 [...]

Shirts max. 1.0 kg* Normal+, Normal, Hand iron r , Timed drying 1) Garment Shirts and blouses . Extr a option Thermospin max. 600 rpm Denim max. 2.5 kg* Extra dry, Normal+, Normal Hand iron r , Hand iron rr , Machine iron, Timed drying 1) Extr a option Thermospin max. 900 rpm Sportswear max. 2.0 kg* Normal+, Normal, Hand iron r , Timed drying 1) Ga[...]

Smoothing max. 2.5 kg* 8 minutes F abric type Cot ton and linen f abrics . Minimum ir on items made of mix ed fibr es , cot tons or synthetics , e.g. trousers , jackets , shirts . Note Smooths out creasing caused during the spin c ycle in the w ash progr amme. F abrics are not complet ely dried in this progr amme. Remo ve garments as soon as the pr[...]

Washing and drying in a continuous sequence Wher e the amou nt of laundr y to be w ashed and dried in one progr amme does not e xceed the maximum weight permit ted for the drying progr amme, washing and drying in one continuous sequ ence is recommended. It is very important to r ead both the "W ashing" and "Dr ying" sections bef[...]

D Load the drum ^ Open the drum door and load the laundr y loosely in the drum. F ollow the load size indicat or and do not ov erload. Do not use deter gent dispensing aids , e.g . plastic dispenser balls , for w ashing follow ed immediatel y by the drying progr amme. These dispensers can melt during the drying progr amme and cause damage to the ma[...]

^ Open the drum door fully . , Warning, the metal cap located on the inside of the door glass is very hot after drying. Do not tou ch it. Danger of burning! ^ Remo ve the laundr y . ^ Check the folds in the door seal for an y small articles , e .g. but tons whic h might be lodged there . R emove an y fluf f from drying from around the door seal. Ch[...]

Cancelling a programme Y ou can cancel a progr amme at any time af ter it has started. ^ P ress the Start/Stop but ton brief ly or turn the progr amme selector to St op . ... During w ashing: The su ds will be pumped aw ay and the w ashing progr amme is cancelled. ... During drying: The g ar ments will be cooled down befor e the door can be opened.[...]

Altering the spin speed ^ P ress the OK but ton. The spin speed will be shown highlight ed. Y ou can use the – and + but tons to c hange the spin speed up until the final spin begins . Y ou can change the thermospin speed up until the ther mospin begins . Altering the drying level / drying time Y ou can alter the drying lev el or drying time duri[...]

With dela y star t you can c hoose when you w ant the progr amme to end. The start of a progr amme can be delayed from 30 minut es up to a maximum of 24 hours , allowing you t o make use of night-time economy electricity r ates , for e xample. The curr ent time of day needs to ha ve been set for dela y start to work correctl y . To select Delay sta[...]

, Disconnect the machine fr om the electricity supply by s witching off at the w all socket and withdr awing the plug befor e any cleaning and maintenance w ork. Cleaning the machine , Do not use solv ents , abr asive cleaners , glass cleaners or all-purpose cleaning agents . These might damage plastic surfaces and other components because of the c[...]

^ Clean the siphon. 1 . Remov e the siphon from compartment § and rinse under w ar m running wat er . Clean the siphon tube in the same w ay . 2 . Replace the siphon. If star ching fr equently , thor oughly clean the siphon and siphon tube regularl y . A build-up of starc h will cause them to get clogged. Cleaning the detergent dispenser drawer ho[...]

Cleaning the porthole glass ^ F rom time t o time you should also clean ... – the door glass on the inside using a mild deter gent or soap and wat er . – the metal cap on the inside of the door glass with a suitable pr oprietary stainless st eel cleaning agent follo wing the manuf acturer's instructions on the pac kaging. ^ Wipe dry using [...]

What to do, i f... With the help of the f ollowing not es , minor f aults in the performance of the appliance, some of which may r esult from incorrect oper ation, can be put right without contacting the Service Department. , Repair w ork to electrical appliances should onl y be carried out by a suitably qualified per son in accordance with local a[...]

Fault messages in the display Message in the display Possible cause Remedy A q Drain fault – The w ater outlet is block ed or restrict ed. – The dr ain hose has been fix ed too high. – Clean the dr ain filter and the dr ain pump as described in "Opening the drum door in the ev ent of a blocked dr ain outlet and/or pow er f ailure". [...]

Problems with the load size indicator Problem Possible cause Remedy The display indicates a load of <25% or no load size is indicated when the drum is full. Ther e was laundr y in the drum when the machine w as switc hed on. This has decalibr ated the sensor from the zer o setting . T o recalibr ate the sensor t o the zer o setting: – Remo ve [...]

General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The mac hine feet are not lev el. Lev el the machine (see "Installation and connection"). The pump makes strange noises. This is not a f ault! These noises occur at the end of a pump sequence as a normal part of the operation. Large amounts of deterge[...]

An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid deter gents usually contain no bleac hing agents . The y do not remo ve fruit, coff ee and tea st ains . – Use a gener al purpose deter gent containing a bleaching agent. – P our stain remo ver s into compartment j and liquid d[...]

An unsatisfactory drying result Problem Possible cause Remedy The laundry is still damp after a drying cycle. The load w as too small for the electr onics to assess the residual moisture corr ectly . In future dry small loads in a timed drying progr amme. The laundry has formed a ring in the drum during the spin because it w as distributed unev enl[...]

The drum door cannot be opened by pressing the Door button Problem Remedy The machine is not connected to the electricity supply and / or is not switched on. Insert the plug in the socket and s witch on and / or switc h the machine on with the I-On/0-Off but ton. The electronic programme locking has been activated. Deactiv ate progr amme locking as[...]

Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switc h the machine off . Drain the machine If the dr ain outlet is blocked, (up to 25 litres) of w ater will be ret ained in the machine . , Caution: if lau ndry has been w ashed at a high temper ature, wat er dr aining out of the machine will still be hot. Danger [...]

Cleaning the drain filter Ther e is a lever behind the det ergent dr awer f ascia panel. ^ Remov e the lever . The dr ain filt er access flap is visible when the drum door is open. ^ Use the lev er to open the access flap . ^ Unscre w the drain f ilter complet ely and then clean it thoroughl y . ^ Check that the impeller can turn easily . Remov e a[...]

Changing the lamp for the drum lighting The mac hine will still operat e with no lamp in place or if the lighting is f aulty . ^ Remo ve the yellow le ver from behind the deter gent dra wer facia panel. ^ Switc h the machine on and open the drum door . ^ Now disconnect the mac hine from the electricity supply , see "Warning and Saf et y instru[...]

In the ev ent of any faults whic h you cannot remedy y ourself , please cont act: – your Miele dealer , or – the Miele Service Department (see back co ver for contact det ails). When cont acting the Service Department, please qu ote the model and serial number of your appliance , both of which ar e shown on the data plate visible abo ve the doo[...]

Front view a Inlet hose (with f le xible, w aterproof metallic out er sleev e) b Electrical connection c - f Fle xible dr ain hose (with detac hable swiv el elbow) g C ontrol panel h Det ergent dispenser dr aw er i Drum door j A ccess panel to the f luff f ilter and the dr ain pump k A ccess panel to the emer gency door release and dr ainage l F ou[...]

Rear view a P rotru ding lid for holding when moving the mac hine b Electricity supply cable c T r ansit bar cov ers d Inlet hose (with f le xible, w aterproof metallic out er sleev e) e Dr ain hose Installation and connection 62[...]

Installation surface A concret e floor is the most suitable installation surface , being far less pr one to vibr ation during the spin cycle than wooden f loorboards or a carpet ed surface . Please note the f ollowing points: ^ The mac hine must be level and securel y positioned. ^ T o av oid vibr ations during spinning, the machine should not be i[...]

^ Using the spanner supplied turn the lef t-hand transit bar 90°, then ^ withdr aw the tr ansit bar . ^ T urn the right-hand transit bar 90°, then ^ withdr aw the tr ansit bar . Installation and connection 64[...]

, T o av oid the risk of injury the holes for the tr ansit bars must be cov ered af ter the tr ansit bars ha ve been remo ved. ^ Fit the cov ers on to the t wo holes . Then plug the holes as sho wn with the caps . , The mac hine must not be moved without the tr ansit fit tings in place. Stor e them in a safe place for future use. The y must be re-f[...]

Levelling the machine The mac hine must stand perfectly le vel on all four f eet to ensur e safe and proper oper ation. Incorrect inst allation may incr ease electricity and wat er consumption and may cause the mac hine to mov e about. F alse v alues ma y also show in the Load and Deter gent display . The f our adjustable screw f eet are used to le[...]

Building under a continous worktop / in a kitchen run , A building-under kit (av ailable to or der) with a cover plat e to replace the mac hine lid is required. It must be fit ted b y suitably qualified person t o ensure electrical safety . N .B . If you wish t o push your machine under a worktop and ther e is space to do this without removing the [...]

Fitting a decor panel The door has a decor fr ame for f it ting a decor panel (av ailable as an optional accessory). Decor panel dimensions Width ..............5 9 0m m( - 1m m ) Height .............5 9 0m m( - 1m m ) Thic kness ...............0 . 6-4m m ^ Open the door . ^ Unscrew the 4 scr ews on the upper decor strip (see illustr ation). ^ Then [...]

Shortening the door panel Y ou can shorten the door panel to match the height of adjacent kitc hen unit door fronts . Fir st of all you need to calculat e measurement X . This is the distance from the lo wer edge of the machine door to the lo wer edge of an adjacent kitchen unit door front. Procedure ^ Open the door . ^ First r emove the door panel[...]

Fitting a plinth facing The g ap bet ween the low er edge of the machine plinth and the f loor can be closed up using a suitable kitc hen furniture plinth f acing. The w ashing machine plinth has a special groo ve in which a plinth f acing can be fit ted. Plinth facing dimensions Length : 592 - 596 mm Thic kness :8 m m Height ( H ): The plinth f ac[...]

The Miele water protection system The Miele w ater pr otection sy stem prot ects machine from w ater damage . The s ystem consists of thr ee main components: 1) the inlet hose 2) the electronic unit and the machine housing 3) the dr ain hose 1) Inlet hose – The inlet hose is t ested to withst and pressur e of more than 1 4,000 kPa. – It has a p[...]

Connection to the water supply The mac hine should be connected to a mains w ater supply in accor dance with local and national safety regulations . The German authorities do not requir e it to ha ve a non-return v alve as the w asher -dr yer has been designed to comply with DIN r egulations . The mac hine is designed to oper ate with a flo w press[...]

Connection to the drainage system The mac hine drains via a dr ain pump with a delivery head of 1 metre . T he dr ain hose must not be kinked as this restricts dr ainage. The swiv el elbow at the end of the hose can be turned in either direction, or can be detached if requir ed, with a sharp twist and pull. If requir ed the drain hose can be e xten[...]

Electrical connection U.K. All electrical work should be carried out by a suit ably qualif ied and competent person, in strict accordance with national and local safety regulations . Ensure po wer is not supplied to the appliance until aft er installation work has been carried out. The appliance is supplied with a mains cable with moulded plug read[...]

Load Consumption data Energy Water Duration in kWh in litres Short Normal Washing Cottons 95°C 5.0 k g 1 .70 42 1 h 53 min 2 h 08 min 60°C 1) 5.0 kg 0.85 42 1 h 29 min 1 h 58 min 40°C 1) 5.0 kg 0.49 42 1 h 29 min 1 h 58 min Minimum iron 40°C 1) 2.5 kg 0.44 49 1 h 05 min 1 h 20 min Delicates 30°C 1 .0 k g 0.33 65 49 min 59 min Automatic 40°C 2[...]

Height 850 mm Height for building under 820 mm Width 595 mm Depth with lid fit ted 600 mm Depth without lid 575 mm Depth with door open 1 1 80 mm W eight 1 06 kg Maximum floor load 1 600 Newton (appr ox. 1 60 kg) Capacity - W ashing Capacity - Drying 5.0 kg dry laundr y 2.5 kg dry laundr y V oltage see data plat e Connect ed load see data plat e F [...]

The Set tings menu is used to alt er the machine 's electronics t o suit changing r equirements . Set tings can be altered at an y time. To open the Settings menu A S witch on the mac hine. T he main menu will appear . 15:03 Select programme B Af ter a f ew seconds an additional line will appear in the display . 15:03 Select programme Settings[...]

Time of day Y ou fir st hav e to decide whether you w ant the time to show in the displa y . Then y ou have t o select either a 24 hour or 1 2 hour clock. Then set the curr ent time of day . To select a 24 hour or 12 hour clock ^ Use the – and + but tons to select the clock option set ting you w ant and confirm your selection b y pressing the OK [...]

Gentle action Activ ating gentle action redu ces the drum action and is suitable for w ashing slightly soiled items mor e gently . It should be activ ated f or garments with a single bar under the care label and f or articles which feel too har d aft er they hav e been dried. Gentle action can be activ ated for the Cot tons and the Minimum ir on pr[...]

Distribution controller The maximum f inal spin speed is limited t o prev ent the laundr y sticking to the drum. (This set ting is only av ailable when w ashing and dr ying in a continuous sequ ence). Ther e are 4 diff erent options: 1 200 rpm (fact ory default set ting) 1 1 00 rpm 1 000 rpm 900 rpm. A tick will appear beside the option t o show th[...]

Lock The s ystem loc k prev ents your machine being used without y our knowledge . When the s ystem loc k has been activ ated, you ha ve to ent er a code af ter switc hing the machine on. Otherwise the machine cannot be oper ated. To activate the lock C Back A X Activate ^ Select Activ ate and confirm your selection. ^ The display will no w request[...]

Temperature Y ou can choose for the t emperatur e to be displa yed as °C/Celsius or °F/F ahr enheit . A tick will appear beside the option t o show that it has been set. ^ Select the option you w ant and confirm your selection. Buzzer When the buzz er fu nction has been activ ated, an audible t one sou nds at the end of a progr amme or when Rinse[...]

Standby T o sav e energy , the display goes out af ter 1 0 minutes and the indicat or light for the Start/Stop but ton will st ar t flashing slo wly . Ther e are t wo options: On Standb y is activ ated: – if a progr amme is not selected af ter the machine has been s witched on. – af ter a progr amme has started. – at the end of a progr amme. [...]

Alter ation rights reserved/2208 M.-Nr . 06 533 690 / 02[...]