Minolta CD-10 инструкция обслуживания

Pr eface Pr ecautions T able of Contents Pr oduct Outline Accessories Names of Parts Connecting with a Computer Basic Operations Using the PC Card Drive CD-10 with a Macintosh Using the PC Card Drive CD-10 with IBM PC/A T Compatibles T r oubleshooting Specifications E INSTRUCTION MANUAL[...]

[...]

1 Getting Started Pr eface Thank you very much for purchasing the Minolta PCMCIA Card Drive CD-10. The Minolta PCMCIA Card Drive CD-10 can be connected to various makes of personal computers to read and write PC cards (PCMCIA/JEIDA specifications) and PC card adapter sets like the Minolta RM-2S/RM-4S SmartMedia™ image memory cards used with the M[...]

2 Pr ecautions Safety Pr ecautions and handling Power cord - Do not bend the power cord excessively or place heavy objects on it. Damage to the cord may cause fire or electric shock. - Do not pull the cord itself to unplug; always hold the plug and pull. - Do not plug or unplug with wet hands. - Unplug from the outlet when you are not using the uni[...]

3 Getting Started Power sour ce Use a standard domestic household power supply (100 to 240V , 50/60Hz). Proper places for use and storage - This unit is to be used at temperatures between +5 ° C and +40 ° C and at relative hu miditi e s b e tween 20% and 8 0% (n o c o ndensation ). - Do not use or store the unit in an excessively hot or cold plac[...]

4 FCC Radio Fr equency Interference W arning Notice for customers in U.S.A This equipment generates and uses radio frequency ener gy , and if not installed and used in strict accordance with the manufacturer ’ s instructions, can cause interference to radio and television reception. This equipment has been certified and found to comply with the l[...]

5 Getting Started PC Cards Most PC cards compatible with PCMCIA/JEIDA standard specifi- cations (A T A cards and SRAM cards) can be used. A variety of prod- ucts are compatible with the PCMCIA/JEIDA specification, but the specifications are ambiguous and certain rules allow a large latitude. As a result, some PC cards may not conform with the read/[...]

6 T ABLE OF CONTENTS Preface 1 Precautions 2 T ABLE OF CONTENTS 6 1. Product Outline 7 Using with Macintosh computers 7 Using with IBM PC/A T compatible computers 7 2. Accessories 8 3. Names of Parts 9 4. Connecting with a Computer 1 1 Using without other SCSI devices 1 1 Using with other SCSI devices 12 Setting the SCSI ID 13 Turning on the power [...]

7 Getting Started 1. Pr oduct Outline This PC card drive is designed to be connected to a personal com- puter to read and write PC cards (A T A cards and SRAM cards). A SCSI interface is used to enable the device to be connected to a Ma- cintosh, IBM PC/A T compatible, and various other personal comput- ers. 1-1 Using with Macintosh computers Conne[...]

8 2. Accessories The PCMCIA Card Drive CD-10 package contains the following items: PCMCIA Card Drive CD-10 LOCK ACCESS POWER Mac-PC Manager™ Lite Contains Mac-PC Manager Lite, a software driver for connection with a Macintosh computer. PCMCIA Card Drive CD-10 User's Manual (this manual) AC Adapter Screwdriver to change SCSI ID address ASPIDI[...]

9 Getting Started 3. Names of Parts This drive unit consists of the following parts: FRONT P ANEL (1) Power Switch By sliding the switch back and forth from left to right, power is turned "on" and "off". (2) Power Indicator Lamp When power is on, light is green. (3) Access Indicator Lamp Indicates the access status of the PC car[...]

10 REAR P ANEL (7) T erminator Switch When this switch is "on", the terminator is active. When this is the last device on a SCSI chain, the switch should be set to "on" (for further details see section 4 on "Connecting with a Computer"). (8) SCSI connector SCSI cable is connected here (D-Sub25 pin). (9) AC adapter plug[...]

Connecting 11 4. Connecting with a Computer This drive unit connects to a computer through a SCSI ca- ble. There are two types of connection depending on whether or not an additional SCSI device is to be used. These two cases are discussed in this section. Note: There are several physical forms of SCSI connectors. Check the SCSI connector of the co[...]

12 NOTE: The cable included in this package is a D-Sub25 to 50-pin full-pitch, intended for use with most IBM PC/A T compatible computers. Macintosh users may require a D-Sub25 to D-Sub25 SCSI cable, available at most computer stores. 4-2 Using with other SCSI devices Since the SCSI standard supports connection to one computer and up to seven SCSI [...]

Connecting 13 SWITCH 0 1 2 3 4 5 6 7 8 9 SCSI ID 0 1 2 3 4 5 6 7 0 1 SCSI ID Switch SWITCH SCSI ID 1 0 1 0 23 5 46 7 8 9 1 0 23 5 46 7 SCSI ID 0 is assigned to the hard drive. SCSI ID 3 is assigned to the internal CD-ROM drive. SCSI ID 7 is assigned to the Macintosh system. 4-3 Setting the SCSI ID The SCSI ID is a unique number assigned to each SCS[...]

14 than 3 may be assigned. The SCSI ID for the built-in hard disk drive and the computer cannot be changed. Also, notice the SCSI IDs for Macintosh computers range from 0 to 7, the numbers on the SCSI switch are 0 through 9. If 8 and 9 on the switch are selected, IDs 0 and 1 are assigned, respectively . For IBM PC/A T compatible computers SCSI IDs [...]

Operating 15 5. Basic Operations This section describes the operation relating to PC cards and PC card sets. SmartMedia SSFDC cards (like Minolta's Image Memory Card RM-2S and RM-4S) can be used in the CD-10 card drive when used with an adapter, such as the PC Card Adapter CA-1S. When used together , the adapter and SmartMedia card are called [...]

16 first and then the PC card icon appears on the monitor . This is the “mounted” state, which enables read and write operations for the PC card set. The time required between card insertion and mounting depends on the card. Usually , the PC card set can be mounted within several sec- onds. (3) If the PC card or SmartMedia card is not formatted[...]

Operating 17 5-2 Removing the PC card set Make sure that the access indicator and lock indicator are not lit, then press the eject button to release the PC card set. When the access indicator is lit In this case, the data is being read or written. W ait until the opera- tions complete; then remove the card set. Removing a PC card or PC card set dur[...]

18 NOTE: The access indicator may flash on and of f even after the eject oper- ation. In this case, you can remove the PC card set. NOTE: Do not select the “Eject Disk” command from the “Special” menu to remove the card set. The CD-10 drive does not have an eject motor . The disk must be ejected manually . For IBM PC/A T compatible computer[...]

Macintosh 19 6. Using with a Macintosh 6-1 Functions of Mac-PC Manager Lite Mac-PC Manager Lite is a software driver that automati- cally mounts Macintosh formatted and DOS (MS-DOS/V , PC-DOS/V) formatted PC cards and floppy disks. Mac-PC Manager Lite provides the following functions: - Automatically mounts the Macintosh- formatted or DOS-formatted[...]

20 6-2 Installation pr ocedur e for Mac-PC Manager Lite Mac-PC Manager Lite is an extension and therefore it must be cop- ied into the extensions folder on the hard disk. System 7.1 or a later version is needed to run this extension. (1) Insert the floppy disk marked "Mac-PC Manager™ Lite". (2) Double click on the disk icon. The icon ?[...]

IBM/W indows 21 Windows 95 The PCMCIA Card Drive CD-10 connects with the Adaptec SCSI board. W indows 95 includes its own driver software, therefore it is not necessary to install additional driver software. However , when working in DOS mode, additional driver software is needed - please refer to the fol- lowing section, "Windows 3.1 and DOS&[...]

22 The PCMCIA Card Drive CD-10 connects to Adaptec’ s SCSI board. It also uses Adaptec’ s software driver EZ-SCSI. This section assumes that Adaptec’ s SCSI board and EZ- SCSI software are installed. For installation of the SCSI board and EZ-SCSI, consult the manuals for those items. When connecting the CD-10 drive to the computer with EZ-SCS[...]

IBM/W indows 23 Note: The following SCSI boards and ASPI managers can be used by the CD-10 drive with IBM PC/A T compatible computers: ASPI Manager: SCSI board: ASPI2DOS.SYS AHA-1510A, AHA-1522A, AP A-1460 ASPI4DOS.SYS AHA-1542CF ASP7DOS.SYS AHA-2742-A T , AHA-2840A ASPI8DOS.SYS AHA-2940 SCSI boards which use the AIC-7970 SCSI protocol chip in stan[...]

24 8. T r oubleshooting Corr ective Measure Insert the power plug securely into the outlet or computer . Use a standard SCSI cable. Use a standard SCSI cable (6m or shorter). Change the cable connections. Activate terminator . T urn off the power to the SCSI device then change the SCSI ID. T urn off the power to the SCSI device then change its SCSI[...]

T roubleshooting 25 Cause The power is not connected to an outlet or computer . Nonstandard SCSI cable is used. The SCSI cable is too long. The settings for the SCSI board are not ap- propriate. Loose connection in the SCSI connector . The terminator is not activated. The same SCSI ID is assigned to another SCSI device. A terminator is included in [...]

26 For questions regarding installation and PCMCIA card compatibility , please contact your dealer or a Minolta Ser - vice Facility . Be sure to include the following information in your correspondence: • The make and model of your computer . • System software and version number . • Information on any other connected SCSI devices. • The sym[...]

Specifications 27 9. Specifications Card type: A T A and SRAM cards that comply with PCMCIA PC Card Standard Release 2.1/JEIDA PC Card Guideline V er . 4.2, and PC Card A T A Release 1.01 PC card slot: 1 T ype I, II or III Host interface: SCSI-2 SCSI connector: D-Sub25 T ransfer rate: 3MB/sec (for asynchronous transfer) Power requir ements: AC 100V[...]

28 9222-2755-91 (9610-A610) Minolta Co., Ltd.[...]