Moxa Technologies Windows 2003 Driver инструкция обслуживания

MOXA Multiport Serial Board Windows 2003 Driver Inst allation Guide First Edition, June 2003 Moxa Technologies Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 www.mo xa. com support@moxa.com.tw[...]

MOXA Multiport Serial Board Windows 2003 Driver Installation Guide The software described in this manual is furnished u nder a license agreement and may be used on ly in accordance with the term s of that agreem ent . Copyright Notice Copyright  2003 Moxa Technologies Co., Ltd. All rights reserved. Reproduction without permission is prohibited. [...]

Table of Contents Chapter 1 Introduction ... ........... ........... ........... ........... .... ........... ........... ....... 4 Chapter 2 Driver Installation for PCI Boards under Windows 2003 ......... . .. 5 Chapter 3 Driver Installation for ISA Boards under Windows 2003 ......... . .. 8 Chapter 4 Changing the Propert ies of Multi-port Boards [...]

1 1 Chap ter 1 Introduction W elcome to the driver installation gu ide under W indows 2003 for MOXA Multiport Serial Boards. This installation guide is for all series of M OXA multiport serial boards, including PCI, ISA, and universal PCI boards. The rest of this installation guide is divided into the following chapters: Chapter 2 , Driver Installa[...]

2 2 Chapte r 2 Driver Installation for PCI Boards under Windows 2003 This chapter includes information about how to inst all the driver for PCI boards under W i ndows 2003. Before you start the installation, you need to follow the steps for hardware installation in the user’ s manual enclosed with the product you purchased. The following steps ar[...]

3. The Installation W izard will start searching for the communication po rt. 4. The next window that opens cautions you that although this software hasn’ t passed W indows Logo testing, this driver has already been tested and been shown that it can support W indows OS. Click on Continue Anyway to proceed. 5. A window will open showing the setup [...]

6. A window will open showing the driver installation for MOXA Port 0 is completed. 7. Repeat steps 2 to 6, until the driver installat ion for every port is compl eted.[...]

3 3 Chapte r 3 Driver Installation for ISA Boards under Windows 2003 This chapter includes information about how to inst all the driver for ISA boards under W indows 2003. Before you start the installation, you need to follow the steps for hardware installation in the user ’ s m anual enclosed with the product you purchased. The following steps a[...]

2. When the System Pr operties wind ow opens, click on the Hardwar e tab, and then click on Add Hardware W izard to start the installation. 3. A W elcome message will ap pear . Click on Next to continue.[...]

4. A window will open showing that the computer is searching for the serial board you ju st added to your computer . 5. A window will open asking if you have already connected the serial board to your com puter . Select Y es, I have already connected the hardware , and click on Next to conti nue.[...]

6. The next window to open lists many hardware option s. Select Add a new hardware device , and then click Next to cont inue. 7. When the next window opens, select Install the hardwar e that I manually select from a list (adv anced) , and then click on Next to continue.[...]

8. A window will open asking you to select the type of hardware you ar e installing. Select Multi-port ser ial adapters , and then click on Next to continue. 9. The next window to open asks you to select t he driver you want to install. Click Have Disk… to install from the floppy disk or CD-ROM enclosed with the serial board you purchased. 10. Th[...]

11. The next window to open prom pts you to select the model of the b oard. In this case, select MOXA C168 Series (ISA Bus) , and then click Next to contin ue. 12. A window will open, stating that wizard is ready to install the driver fo r C168 Series. Click Next to conti nue.[...]

13. Although the next window to open states th at the software hasn’t passed W indows Logo testing, you can rest assured that this driver has already bee n tested and been shown that it can supp ort this W indows OS. Click on Continue Anyway to proceed. 14. The next window to open shows the installation files are being copied. 15. The Completing [...]

16. The System Settings Change window will open, asking to restart your computer to let new settings take effect. Click Ye s to restart your com puter . 17. After your computer has rest arted, the Found New Hardwar e Wizard window will open to help you install the driver for MOXA Port 0 . Select Install the softwar e automatical ly (Recommended) , [...]

4 4 Chapte r 4 Changing the Properties of Multi-port Boards This chapter includes information about how to chan ge your ISA boards’ configuration if they are not set with default settings. 1. Use your mouse to position the cursor over your deskto p’ s My computer , click the right mouse button, and select Pr operties . 2. The Device Manager win[...]

3. Select MOXA C168 Series (ISA Bus) , click t he right mouse button, and select Properties . 4. When the MOXA C168 Series (ISA Bus) window opens, click on the Resources tab.[...]

5. Select Basic configuration 0000 under Setting Based on: , select I/O Range under Resour ce settings: , and cl ick OK . 6. When the Edi t Input/ Outpu t Ra nge window opens, you can chan ge the values of the board’ s parameters. Click OK to return to the Resources window .[...]

7. If you need to change Interrupt V ector settings and IRQ setti ngs as well, select the second I/O ra nge under Resource se ttings : or IRQ , change the value, and then clic k OK to close the w indow . 8. The System Settings Change window will open next, asking you to restart your com puter to let the new settings take eff ect. Click Ye s to rest[...]

5 5 Chapter 5 Checking the Installation This chapter presents 3 approaches to exam ine whether the installation is successful. In this chapter , we use C168 Series as a example m odel. Using Device Manager 1. Use your mouse to position the cursor over your deskto p’ s My computer icon, cli ck the right mouse button, and then select Pr operties . [...]

Using Event Log T o use Event Log to check MOXA boards, click St a r t Æ Settings Æ Contr ol Panel Æ Administrative T ools Æ Event V iewer to enter the Event V iewer progra m. Y ou can find the latest warn ing messages relevant to MOXA ’s drivers under Sys tem categ ory .[...]

6 6 Chap ter 6 Uninstalling the Driver This chapter includes information about uninstalling the driver . In this chapter , we use C P-1 14 Series (PCI bu s) as the example model. 1. Use your mouse to position the cursor over your deskto p’ s My computer , click the right mouse button, and select Pr operties . 2. When the System Pr operties wind o[...]

3. When the Device Manager window open s, select MOXA CP-1 14 Series (PC I bus) under Multi-port serial adapters , click the right mouse button, and select Uninstal l . 4. When the following warning message appears, click OK to uninsta ll.[...]