Napoleon Grills PTHC38PK инструкция обслуживания

Manual,Instructions & Parts List SRPH01 PROP ANE P A TIO HEA TER (FOR OUTDOOR USE ONL Y) -PTHC38PK-[...]

2 TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS N EEDED: 7/16 Wrench 3/8 Open End W rench Adjustable Opening Wrench, 8 Long Philips Head Screwdriver Leak Detection Solution ( Instructions how to make solution are included in page 9 ) ＂ ＂ ＂ W ARNING Note: 20 Pound, 5 Gallon LPG T ank is not supplied Note: 20[...]

3 PA R T S PA R T S 4 Reflector Cap 5 6 1 2 3 4 5 4 12 1 Centre Reflector Cap 1 Head Assembly 3 M6 X 70mm Double Pointed Bolts 18 M6 Washers 12 M6 X10 Screws 13 11 6 7 8 11 12 9 10 13 1 Gas Hose 1 Post 1 Gas Cylinder Housing 4 M8 X 35mm Bolts 4 M8 Lock W ashers 15 M6 Nuts 4 M8 Nuts 14 15 1 Regulator 1 Cylinder (Not Supplied) 8 11 12 10 13 14 7 9 7 [...]

4 PRECAUTIONS PRECAUTIONS Do not use the heater in an explosive atmosphere. Keep the heater away from areas where gasoline or other flammable liquids or vapors are stored. Prior to use, check for damaged parts such as hoses, regulators, pilot or burner . Always assure there is ample fresh air ventilation. For outdoor use ONL Y . Never replace or su[...]

ASSEMBL Y FOR LIGHT SYSTEM ASSEMBL Y FOR LIGHT SYSTEM W ARNING: TO BE INST ALLED ONL Y BY AN AUTHORISED PERSON Instruction For Battery Installing Upon first time use of the product,please remove the ignition button and install an AAA battery as indicated. Ignition button Replace Battery Control knob Ignition button AAA battery 5[...]

6 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater requir es basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Place the post on the top of the gas cylinder housing. Fasten the post to the gas cylinder housing using the four (4 pcs) Step 1 M8 35mm Bolts , 8mm Lock W asher , Nuts for M8 35mm Bolts . 5 12 10 X X 6 S[...]

7 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater requir es basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 4 ---- Attach Center Reflector to Reflector Attach center reflector to the top of reflector (4 pcs) by M6 X 10 mm screws (12 pcs) , Step 4 2 1 11 6mm washers (12 pcs) and nuts (12 pcs). 7 9 Step 3 --[...]

8 ASSEMBL Y ASSEMBL Y Step 5 3 Step 5 ---- Attach Center Reflector and Reflector Load center reflector and reflector to the top of head assembly by double pointed bolts (3 pcs) to the top of Head Assembly 6mm washers (3 pcs) and nuts (3 pcs) 7 9 13 NOTE: Assembly of this heater requir es basic mechanical skills. Pr oper assembly is the responsibili[...]

9 SAFETY CHECKS SAFETY CHECKS NOTE: Always check the following connections. Check all connections on the hose regulator assembly . Check the regulator to the LP gas cylinder connection. Note that the regulator adapter is a reverse thread. Check the hose to the intake pipe to make certain that it is not kinked or in a position that could cause it to[...]

10 OPERA TION OPERA TION FOR YOUR SAFETY : If at any time you are unable to light burner and smell gas,wait 5 minutes to allow gas to dissipate before attempting to light heater . If,after 1 minute, you are unable to light burner , wait 5 minutes and allow flammable vapors to dissipate before attempting to light heater W ARNING FOR YOUR SAFETY : Do[...]

OPERA TION OPERA TION "" OW "" OW CAUTION : NOTE: When heater is ON: A void inhaling fumes emitted from the heater's First use.Smoke and odor from the burning of oils used in manufacturing will appear .Both smoke and odor will dissipate after approximately 30 minutes. The heater should NOT produce thick black smoke. The bur[...]

12 LOCA TING HEADER FOR USE LOCA TING HEADER FOR USE BE CAREFUL: WHEN CER T AIN MA TERIALS OR ITEMS ARE LEFT UNDER THIS SP ACE HEA TER WHILE IN USE, THEY WILL BE SUBJECT T O RADIANT HEA T AND COULD BE SERIOUSL Y DAMAGED. Th is heater is primarily used for the heating of outdoor patios, decks, spas, pool and working areas. Always make sure that adeq[...]

13 "" OW W ARNING DO NOT touch or move heater for at least 45 minutes after use. Allow all burner elements to cool before touching. FOR YOUR SAFETY : NOTE In a salt-air environment (such as near an ocean). corrosion occurs more quickly than normal. Frequently check for corroded areas and repair them promptly . STORAGE : Between uses: T ur[...]

14 TROUBLESHOOTING TROUBLESHOOTING PROBLEM PROBABLE CAUSE SOLUTION Pilot will not light Gas valve may be OFF T urn the gas valve ON Orifice blocked Clean or replace Orifice Air in supply system Purge air from lines Pilot will not stay on Debris around pilot Clean dirty area Loose connection T ighten connection Thermocouple bad Replace Thermocouple [...]