National Instruments HPC167064 инструкция обслуживания

TL/DD11046 HPC167064/HPC467064 High-Performance microController with a 16k UV Erasable CMOS EPROM PRELIMINARY August 1992 HPC167064/HPC467064 High-Performance microController with a 16k UV Erasable CMOS EPROM General Description The HPC167064 is a member of the HPC family of High Performance microControllers. Each member of the family has the same [...]

Absolute Maximum Ratings If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Total Allowable Source or Sink Current 100 mA Storage Temperature Range b 65 § Ct o a 150 § C Lead Temperature (Soldering, 10 sec.) 300 § C V CC with Respect to GN[...]

20 MHz AC Electrical Characteristics (See Notes 1 and 4 and Figures 1 thru 5 ). V CC e 5V g 5% * ,T A eb 55 § Ct o a 125 § C for HPC167064 and V CC e 5V g 10%, T A e 0 § Ct o a 70 § C for HPC467064 Symbol and Formula Parameter Min Max Units Notes f C CKI Operating Frequency 2 20 MHz t C1 e 1/f C CKI Clock Period 50 500 ns t CKIH CKI High Time 2[...]

20 MHz AC Electrical Characteristics (Continued) (See Notes 1 and 4 and Figures 1 thru 5 .) V CC e 5V g 5% * ,T A eb 55 § Ct o a 125 § C for HPC167064 and V CC e 5V g 10%, T A e 0 § Ct o a 70 § C for HPC467064 (Continued) Symbol and Formula Parameter Min Max Units Notes t DC1ALER Delay from CKI Rising Edge to ALE Rising Edge 0 35 ns (Notes 1, 2[...]

30 MHz AC Electrical Characteristics (See Notes 1 and 4 and Figures 1 thru 5 ). V CC e 5V g 10%, T A e 0 § Ct o a 70 § C for HPC467064. Symbol and Formula Parameter Min Max Units Notes f C CKI Operating Frequency 2 30 MHz t C1 e 1/f C CKI Clock Period 33 500 ns t CKIH CKI High Time 22.5 ns t CKIL CKI Low Time 22.5 ns t C e 2/f C CPU Timing Cycle [...]

30 MHz AC Electrical Characteristics (Continued) (See Notes 1 and 4 and Figures 1 thru 5 ). V CC e 5V g 10%, T A e 0 § Ct o a 70 § C for HPC467064. (Continued) Symbol and Formula Parameter Min Max Units Notes t ARR e (/4 t C b 5 ALE Falling Edge to RD Falling Edge 12 ns t ACC e t C a WS b 32 Data Input Valid after Address Output Valid 100 ns t RD[...]

CKI Input Signal Characteristics TL/DD/11046 – 4 Note: AC testing inputs are driven at V IH for logic ‘‘1’’ and V IL for a logic ‘‘0’’. Output timing measurements are made at V CC /2 for both logic ‘‘1’’ and logic ‘‘0’’. FIGURE 2. Input and Output for AC Tests Timing Waveforms TL/DD/11046 – 5 FIGURE 3. CK1, CK2, [...]

Timing Waveforms (Continued) TL/DD/11046 – 7 FIGURE 5. Read Cycle TL/DD/11046 – 8 FIGURE 6. Ready Mode Timing TL/DD/11046 – 9 FIGURE 7. Hold Mode Timing 8[...]

Timing Waveforms (Continued) TL/DD/11046 – 10 FIGURE 8. MICROWIRE Setup/Hold Timing TL/DD/11046 – 11 FIGURE 9. UPI Read Timing TL/DD/11046 – 12 FIGURE 10. UPI Write Timing 9[...]

Functional Modes of Operation There are two primary functional modes of operation for the HPC167064. # EPROM Mode # Normal Running Mode EPROM MODE In the EPROM mode, the HPC167064 is configured to ‘‘ap- proximately emulate’’ a standard NMC27C256 EPROM. Some dissimilarities do exist. The most significant one is that HPC167064 contains only 1[...]

Functional Modes of Operation (Continued) Security Level 2 This security level prevents programming of the on-chip EPROM or the ECON registers thereby providing WRITE protection. Read accesses to the on-chip EPROM or ECON registers may be accomplished without constraint in EPROM. Read accesses to the on-chip EPROM may be accomplished without constr[...]

Pin Descriptions The HPC167064 is available only in 68-pin LDCC package. I/O PORTS Port A is a 16-bit bidirectional I/O port with a data direction register to enable each separate pin to be individually de- fined as an input or output. When accessing external memo- ry, port A is used as the multiplexed address/data bus. Port B is a 16-bit port with[...]

Connection Diagram TL/DD/11046 – 17 Top View Order Number HPC167064, EL See NS Package Number EL68C Port sA&B The highly flexible A and B ports are similarly structured. The Port A (see Figure 11 ), consists of a data register and a direction register. Port B (see Figures 12 thru Figure 14 ) has an alternate function register in addition to t[...]

Port sA&B (Continued) TL/DD/11046 – 20 FIGURE 12. Structure of Port B Pins B0, B1, B2, B5, B6 and B7 (Typical Pins) TL/DD/11046 – 21 FIGURE 13. Structure of Port B Pins B3, B4, B8, B9, B13 and B14 (Timer Synchronous Pins) 14[...]

Port sA&B (Continued) TL/DD/11046 – 22 FIGURE 14. Structure of Port B Pins B10, B11, B12 and B15 (Pins with Bus Control Roles) Operating Modes To offer the user a variety of I/O and expanded memory options, the HPC167064 has four operating modes. The various modes of operation are determined by the state of both the EXM pin and the EA bit in [...]

HPC167064 Operating Modes SINGLE CHIP NORMAL MODE In this mode, the HPC167064 functions as a self-contained microcomputer (see Figure 15 ) with all memory (RAM and EPROM) on-chip. It can address internal memory only, con- sisting of 16 kbytes of EPROM (C000 to FFFF) and 512 bytes of on-chip RAM and Registers (0000 to 02FF). The ‘‘illegal addres[...]

HPC167064 Interrupts (Continued) TL/DD/11046 – 24 FIGURE 16. 8-Bit External Memory TL/DD/11046 – 25 FIGURE 17. 16-Bit External Memory 17[...]

HPC167064 Interrupts (Continued) TABLE II. Interrupts Vector Interrupt Source Arbitration Address Ranking FFFF:FFFE RESET 0 FFFD:FFFC Nonmaskable external on rising edge of I1 pin 1 FFFB:FFFA External interrupt on I2 pin 2 FFF9:FFF8 External interrupt on I3 pin 3 FFF7:FFF6 External interrupt on I4 pin 4 FFF5:FFF4 Overflow on internal timers 5 FFF3:[...]

TL/DD/11046 – 26 FIGURE 18. Block Diagram of Interrupt Logic 19[...]

Timer Overview (Continued) (Clock Input/16) rate. It is used for WATCHDOG logic, high speed event capture, and to exit from the IDLE mode. Con- sequently, it cannot be stopped or written to under software control. Timer T0 permits precise measurements by means of the capture registers I2CR, I3CR, and I4CR. A control bit in the register TMMODE confi[...]

Timer Overview (Continued) Maximum output frequency for any timer output can be ob- tained by setting timer/register pair to zero. This then will produce an output frequency equal to (/2 the frequency of the source used for clocking the timer. Timer Registers There are four control registers that program the timers. The divide by (DIVBY) register p[...]

MICROWIRE/PLUS Application Figure 25 illustrates a MICROWIRE/PLUS arrangement for an automotive application. The microcontroller-based sys- tem could be used to interface to an instrument cluster and various parts of the automobile. The diagram shows two HPC167064 microcontrollers interconnected to other MICROWIRE peripherals. HPC167064 1 is set up[...]

HPC167064 UART The HPC167064 contains a software programmable UART. The UART (see Figure 26 ) consists of a transmit shift regis- ter, a receiver shift register and five addressable registers, as follows: a transmit buffer register (TBUF), a receiver buff- er register (RBUF), a UART control and status register (ENU), a UART receive control and stat[...]

Universal Peripheral Interface The Universal Peripheral Interface (UPI) allows the HPC167064 to be used as an intelligent peripheral to anoth- er processor. The UPI could thus be used to tightly link two HPC167064’s and set up systems with very high data ex- change rates. Another area of application could be where a HPC167064 is programmed as an [...]

Shared Memory Support (Continued) TL/DD/11046 – 36 FIGURE 28. Shared Memory Application (HPC167064 Interface to Series 32000 System) Design Considerations TABLE III. Memory Map of HPC167064 Emulating an HPC16064 FFFF:FFF0 Interrupt Vectors FFEF:FFD0 JSRP Vectors FFCF:FFCE : : On-Chip ROM User Memory C001:C000 ( BFFF:BFFE External Expansion :: Mem[...]

Design Considerations (Continued) TABLE IV. Memory Map of HPC167064 Emulating an HPC16083 FFFF:FFF0 Interrupt Vectors FFEF:FFD0 JSRP Vectors FFCF:FFCE : : On-Chip EPROM E001:E000 ( User Memory DFFF:DFFE External Expansion : : Memory 0201:0200 ( 01FF:01FE : : On-Chip RAM User RAM 01C1:01C0 ( 0195:0194 WATCHDOG Register WATCHDOG Logic 0192 T0CON Regi[...]

Design Considerations (Continued) Designs using the HPC family of 16-bit high speed CMOS microcontrollers need to follow some general guidelines on usage and board layout. Floating inputs are a frequently overlooked problem. CMOS inputs have extremely high impedance and, if left open, can float to any voltage. You should thus tie unused inputs to V[...]

HPC167064 CPU The HPC167064 CPU has a 16-bit ALU and six 16-bit regis- ters. Arithmetic Logic Unit (ALU) The ALU is 16 bits wide and can do 16-bit add, subtract and shift or logic AND, OR and exclusive OR in one timing cycle. The ALU can also output the carry bit to a 1-bit C register. Accumulator (A) Register The 16-bit A register is the source an[...]

HPC Instruction Set Description (Continued) Mnemonic Description Action BIT INSTRUCTIONS SBIT Set bit 1 x Mem.bit RBIT Reset bit 0 x Mem.bit IFBIT If bit If Mem.bit is true, do next instr. MEMORY TRANSFER INSTRUCTIONS LD Load MemI x MA Load, incr/decr X Mem(X) x A, X g 1 (or 2) x X ST Store to Memory A x Mem X Exchange A Ý Mem Exchange, incr/decr [...]

Code Efficiency One of the most important criteria of a single chip microcon- troller is code efficiency. The more efficient the code, the more features that can be put on a chip. The memory size on a chip is fixed so if code is not efficient, features may have to be sacrificed or the programmer may have to buy a larger, more expensive version of t[...]

Development Support (Continued) PROGRAMMING SUPPORT The HPC167064 EPROM array can be programmed using a DATA I/O Unisite model with a pinsite module. No adaptor board is required with the DATA I/O programmer. Program- ming of the configuration bytes and security bits is de- scribed in the HPC Family User’s Manual. HOW TO ORDER To order a complete[...]

Part Selection The HPC family includes devices with many different options and configurations to meet various application needs. The number HPC167064 has been generically used throughout this datasheet to represent the whole family of parts. The following chart explains how to order various options available when ordering HPC family members. Note: [...]

33[...]

HPC167064/HPC467064 High-Performance microController with a 16k UV Erasable CMOS EPROM Physical Dimensions inches (millimeters) Leaded EPROM Chip Carrier (EL) Order Number HPC167064EL or HPC467064EL NS Package Number EL68C LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS [...]