Nissan 2010 Xterra инструкция обслуживания

® 2010 X T ERR A OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2010 N I SSAN XTE R RA N50-D Printing : March 2010 (10) Publication No.: OM0E 0N50U1 Printed in U .S.A. N50-D[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or per- formance problems resulting from modi- fications may not be covered under NISSAN warranties. This manual includes information for all options [...]

CALIFORNIA PROPOSITION 65 WARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth de- fects or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear contain or emit chemi[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Heater, air conditioner, audio and phone systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer information In[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. 2nd row seat belts (P . 1-14) 2. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-44) 3. Front seat belts (P . 1-14) 4. Head restraints (P . 1-4) 5. Supplemental front-impact air bags (P . 1-44) 6. Seats (P . 1-2) 7. Occupant classification sensor (pressure sensor) (P . 1-52) 8. Seat belts with pretensioners (P . 1-57) 9[...]

1. Engine hood (P . 3-9) 2. Windshield wiper and washer switch (P . 2-24) 3. Windshield (P . 8-19) 4. P ower windows (P . 2-45) 5. Door locks, keyfob, keys (P . 3-3, 3-5, 3-2) 6. Mirrors (P . 3-13) 7. Tire pressure (P . 8-32) 8. Flat tire (P . 6-2) 9. Tire chains (P . 5-36) 10. Replacing bulbs (P . 8-27) 11. Headlight and turn signal switch (P . 2-[...]

1. Roof rack (P . 2-42) 2. V ehicle loading (P . 9-12) 3. Rear window and outside mirror (if so equipped) defroster switch (P . 2-25) 4. Rear window washer (P . 2-25) 5. Lift gate (P . 3-9) 6. Spare tire (P . 6-2) 7. Replacing bulbs (P . 8-27) 8. Fuel-filler door (P . 3-10) 9. Child safety rear door lock (P . 3-5) See the page number indicated in p[...]

1. Map lights (P . 2-48) 2. Sun visors (P . 3-12) 3. Inside mirror (P . 3-13) 4. Glove box (P . 2-36) 5. Console box (P . 2-36) 6. Front seats (P . 1-2) 7. Rear seats (P . 1-11) 8. Storage (P . 2-35) See the page number indicated in paren- theses for operating details. WII0056 PASSENGER COMPARTMENT Illustrated table of contents 0-5[...]

1. V ents (P . 4-2) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-26) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands- Free Phone System (if so equipped) (P . 4-36, P . 4-38) 4. Driver supplemental air bag/horn (P . 1-44, P . 2-30) 5. Meters, gauges and warning/indicator lights (P . 2-3, 2-12) 6. [...]

15. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P . 2-32) Hill descent control switch (if so equipped) (P . 2-31) V ehicle Dynamic Control (VDC) OFF switch (P . 2-30) 16. Shift selector (P . 5-12) 17. 4WD shift switch (if so equipped) (P . 5-22) 18. Climate controls (P . 4-2, P . 4-10) 19. Hazard warning flasher sw[...]

VQ40DE engine 1. Windshield washer fluid reservoir (P . 8-13) 2. Fuse/fusible link box (P . 8-22) 3. Fuse and relay box (P . 8-22) 4. Engine oil filler cap (P . 8-8) 5. Engine oil dipstick (P . 8-8) 6. Brake fluid reservoir/Clutch fluid reservoir (MT model) (P . 8-12) 7. Air cleaner (P . 8-17) 8. Drive belt location (P . 8-16) 9. Radiator cap (P . [...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-13 Automatic transmis- sion oil temperature warning light (if so equipped) 2-13 Automatic transmis- sion park warning light ( model) 2-13 or Brake warning light 2-14 Charge warning light 2-14 W arning light Name Page Door open warning light 2-14 Engine oil pressure warning[...]

Indicator light Name Page High beam indicator light (Blue) 2-18 Hill descent control system on indicator light (if so equipped) 2-31 Malfunction Indica- tor Light (MIL) 2-19 Overdrive off indica- tor light (A/T models only) 2-19 Security indicator light 2-19 Slip indicator light 2-20 T ransfer 4LO posi- tion indicator light ( model) 2-20 Indicator [...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment ....................1 - 2 Head restraints .................................1 - 4 Adjustable headrest (if so equipped) ..............1 - 7 Flexible seating ................................ 1-10 Seat belt[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seat[...]

Lumbar support (if so equipped) The lumbar support feature provides lower back support to the driver. Move the lever forward or backward to adjust the seat lumbar area. HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust[...]

Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. LRS0887 WRS0134 LRS0888 Safety—Seats, seat belts and supplemental restraint system 1-5[...]

T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the veh[...]

Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occu- pant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries[...]

Components 1. Adjustable headrest 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the headrest so the center is level with the center of the seat occupant’s ears. T o raise the headrest, pull it up. LRS0887 WRS0134 LRS0888 1-8 Safety—Seats, seat belts and supplemental restraint system[...]

T o lower, push and hold the lock knob and push the headrest down. Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly so it is not loose in the vehicle. 5. Reinstall and properl[...]

FLEXIBLE SEATING WARNING ● Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats [...]

䊊 2 Once the seatback is released, it will enable you to fold the front passenger seatback flat over the seat cushion. 3. T o return the front passenger’s seat to a seating position, lift up on the seatback and push it up to an upright position. Then pull up on the recline lever and lean the seatback to a proper seating position. Release the le[...]

䊊 1 Disconnect and secure the center seat belt and tongues into the retractor base. See “Stowing the center seat belt” later in this section. Then properly stow the outboard seat belts in the seat belt hooks before fold- ing down the rear seats. See “Seat belt hook” in this section for more information. Lower the head restraints to the fu[...]

䊊 4 T o return the bench seats to a seating posi- tion, reverse this process. Raise the seat- backs to an upright position. Make sure to hold the seat belts above the seat cushion, then push the seat cush- ion down into place. Removing the 2nd row bench seat cushions The rear seat cushion can be removed to provide additional space when folding th[...]

● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. ● When returning the seatbacks to the upright position, be certain they are completely secured. If they are not com- pletely secured in the latched position, passengers may be [...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulled[...]

WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Check[...]

Center of the rear bench seat The center seat belt has a connector tongue 䊊 1 and a seat belt tongue 䊊 2 . Both the connector tongue and the seat belt tongue must be securely latched for proper seat belt operation. WARNING ● Always fasten the connector tongue and the seat belt in the order shown. ● Always make sure both the connector tongue[...]

Stowing the center seat belt When folding down the rear seat, the rear center seat belt can be retracted into a stowed position as follows: 1. Hold the connector tongue 䊊 1 so that the seat belt does not retract suddenly when the tongue is released from the connector buckle. 2. Insert a suitable tool such as a key 䊊 A into the connector buckle [...]

Attaching the center seat belt Always be sure the center seat belt connector tongue and connector buckle are attached. Dis- connect only when folding down the rear seat. T o connect the buckle: 䊊 1 Pull out the seat belt tongue from the retrac- tor base. 䊊 2 Pull out the connector tongue from the molded retractor base. 䊊 3 Pull the seat belt [...]

2. Insert the shoulder belt into the back of the comfort guide so that the seat belt lays flat in the guide. Be sure that the comfort guide routes the seat belt properly over the center of your shoulder and across your chest. The belt should be away from your face and neck, but not falling off of your shoulder. 3. T o return the seat belt comfort g[...]

WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chanc[...]

● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors work properly . If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt as- sembly should be replaced. Children need adults to help protect them. They need to be proper[...]

INFANTS Infants up to at least 1 year old should be placed in a rear-facing child restraint. NISSAN recom- mends that infants be placed in child restraints that comply with Federal Motor V ehicle Safety Standards or Canadian Motor V ehicle Safety Standards. Y ou should choose a child restraint that fits your vehicle and always follow the manu- fact[...]

PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restrain[...]

– Child restraint anchor points are de- signed to withstand loads from child restraints that are properly fitted. – Never use the anchor points for adult seat belts or harnesses. – A child restraint with a top tether strap should not be used in the front passenger seat. – Keep seatbacks as upright as pos- sible after fitting the child restr[...]

LA T CH (Lower Anchors and T ethers for CHildren) SYSTEM Y our vehicle is equipped with special anchor points that are used with LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat [...]

LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that[...]

T op tether anchor WARNING Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage it during a collision. A child could be seriously injured or kill[...]

2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the cente[...]

4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in[...]

WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the operatio[...]

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slac[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the headrest to obtain the correct child restraint fit. If the headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is removed. See “ Adjustable headrest” in this section for h[...]

6. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. 7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 5. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING The three-point seat belt with Automatic [...]

3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anc[...]

6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the[...]

10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see, ⬙ Front passenger air bag and status light ⬙ in this section. Move the child restraint to another seating position. Have the system c[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child Safety” , “Child Restraint” and “Booster Seats” sections before installing a child restraint. Follow these steps to install a booster [...]

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. P osition the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjusting the se[...]

Roof-mounted curtain side-impact and rollover supplemental air bag system: This system can help cushion the impact force to the head of occupants in front and rear outboard seating positions in certain side impact or rollover collisions. In a side impact, the curtain and roll- over air bags are designed to inflate on the side where the vehicle is i[...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● The front pa[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags [...]

WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details. ARS1044 ARS1045 WRS0256 1-48 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact and rollover supplemental air bags: ● The side air bags and curtain and roll- over air bags ordinarily will not inflate in the event of a frontal impact, rear im- pact, or lower severity side collision. Always wear your seat belts to help reduce th[...]

WARNING ● The seat belts, the side air bags and curtain and rollover air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain and rollover air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front sea[...]

1. Roof-mounted curtain side-impact and rollover supplemental air bags 2. Air bag Control Unit (ACU) 3. Supplemental front-impact air bag modules 4. Crash zone sensor 5. Occupant classification system control unit 6. Occupant classification sensor (pressure sensor) 7. Satellite sensors 8. Seat belt buckle switches 9. Seat belt with pretensioner 10.[...]

NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with the NISSAN Ad- vanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regu- lations. It is also permitted in Canada. However, all of the information, cautions and warn- ings in this manual still a[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the passen- ger air bag to be automatically turned OFF . For small adults it may be turned OFF , however if the occupant takes his/her weight off the seat cush- ion (for example, by not sitting upright, by sitting on an[...]

If a malfunction occurs in the front passenger air bag system, the supplemental air bag warning light , located in the meters and gauges area of the the instrument panel, will blink. Have the system checked by a NISSAN dealer. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on [...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain and roll- over air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help r[...]

WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. ● Right after inflation, several side air bag and curtain and rollover [...]

● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system activates in conjunction with the front air bag system. The pretensioner system also activates with the curtain and rollover air bags in certain types of rollover collisions o[...]

SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact and rollover supplemental air bag and seat belt pretensioner systems. The monitored c[...]

WARNING ● Once a front air bag, side air bag, or curtain and rollover air bag has inflated, the air bag module will not function again and must be replaced. Addition- ally, if any of the front air bags inflate, the activated pretensioners must also be replaced. The air bag module and pretensioner should be replaced by a NISSAN dealer. The air bag[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-61[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T rip computer (if so equipped) ...................2 - 5 T achometer ....................................2 - 6 Engine coolant temperature gauge .............[...]

Sunglasses holder (if so equipped) .............. 2-36 Map pockets .................................. 2-37 Seat pockets (if so equipped) ................... 2-37 Cup holders .................................. 2-38 Cargo area storage ............................ 2-39 Luggage hooks ................................ 2-39 Cargo nets ....................[...]

1. V ents (P . 4-2) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-26) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands- Free Phone System (if so equipped) (P . 4-36, P . 4-38) 4. Driver supplemental air bag/horn (P . 1-44, P . 2-30) 5. Meters, gauges and warning/indicator lights (P . 2-3, 2-12) 6. [...]

15. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P . 2-32) Hill descent control switch (if so equipped) (P . 2-31) V ehicle Dynamic Control (VDC) OFF switch (P . 2-30) 16. Shift selector (P . 5-12) 17. 4WD shift switch (if so equipped) (P . 5-22) 18. Climate controls (P . 4-2, P . 4-10) 19. Hazard warning flasher sw[...]

1. Speedometer 2. Odometer 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer records the total distance the ve- hicle has been driven. The twin trip odometer recor[...]

For vehicles equipped with trip computer, push- ing the change button changes the display as follows: T rip → T rip → Distance to Empty → Average speed → Average fuel consumption → Journey time → T rip For additional information, refer to “T rip com- puter” later in this section. Resetting the trip odometer: Pushing the change butto[...]

Average fuel consumption (Mpg or l/100km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the change button for more than approximately 1 second. The dis- play is updated every 30 seconds. At about the first 1/3 miles (500 m) after a reset, the display shows (----) . Journey t[...]

CAUTION If the gauge indicates coolant tempera- ture near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the nor- mal range, stop the vehicle as soon as safely possible. If the engine is over- heated, continued operation of the ve- hicle may seriously damage the engine. See “If your vehicle[...]

ENGINE OIL PRESSURE GAUGE The gauge indicates the engine lubrication sys- tem oil pressure while the engine is running. The needle should be in the middle of the gauge when the engine is running. CAUTION ● This gauge is not designed to indicate low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” in the “Maintena[...]

This unit measures terrestrial magnetism and in- dicates heading direction of vehicle. With the ignition switch in the ON position, press the button as described in the fallowing chart to activate various features of the automatic anti-glare rearview mirror. Push and hold the button for about: Feature: (Push button again for about 1 sec- ond to cha[...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 11 secon[...]

2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) . 3. After completing the circles, the display should return to normal. CAUTION ● Do not install a ski rack, antenna, etc ., which are attached to the vehicle by means of a magnet. They affect the op- eration of the compass. ● When cle[...]

or Anti-lock Braking System (ABS) warning light Low windshield-washer fluid warning light (if so equipped) Hill descent control system on indicator light (if so equipped) Automatic transmission oil temperature warning light (if so equipped) Seat belt warning light and chime Malfunction Indicator Light (MIL) Automatic transmission park warning light[...]

CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: , or , , , , The following lights come on briefly and then go off: or , , , , , , , If any light fails to come on, it may indicate an open circuit in the electrical system. Ha[...]

This light indicates that the automatic transmis- sion parking function is not engaged. If the trans- fer control is not secured in any drive position while the shift selector is in the P (Park) position, the transmission will disengage and the drive wheels will not lock. or Brake warning light This light functions for both the parking brake and th[...]

The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See “Engine oil” in the “Maintenance and do-it-yourself” section of this manual. CAUTION Running the engine with the engine oil pressure warning light on could cause se- rious damage to the engine almost imme- diately.[...]

Tire and Loading Information label located in the driver’s door opening. The low tire pressure warning light does not automati- cally turn off when the tire pressure is ad- justed. After the tire is inflated to the rec- ommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pr[...]

Low windshield-washer fluid warning light (if so equipped) This light comes on when the windshield-washer fluid is at a low level. Add windshield-washer fluid as necessary . See “Windshield-washer fluid” in the “Maintenance and do-it-yourself” section of this manual. Seat belt warning light and chime The light and chime remind you to fasten[...]

Cruise set switch indicator light The light comes on while the vehicle speed is controlled by the cruise control system. If the light blinks while the engine is running, it may indicate the cruise control system is not functioning prop- erly . Have the system checked by a NISSAN dealer. Electronic locking rear differential (E-Lock) system on indica[...]

Malfunction Indicator Light (MIL) If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The Malfunction Indicator Light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is i[...]

For additional information, see “Security sys- tems” later in this section. Slip indicator light This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery . T ransfer 4L O position indicator light ( model) The light s[...]

Control (VDC) system” in the “Starting and driv- ing” section of this manual. If the light does not go off after performing the reset procedure, have the traction control system checked by a NISSAN dealer. While the V ehicle Dynamic Control system is operating, you might feel slight vibration or hear the system working when starting the vehic[...]

The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Al- ways secure your vehicle even if parking for a brief period. Never leave your keys in the ignition, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure,[...]

The alarm is activated by: ● opening a door without using the key or keyfob (even if the door is unlocked by using the inside lock knob or the power door lock switch) . How to stop an activated alarm The alarm stops only by unlocking the driver’s door or the liftgate with the key or by pressing the button on the keyfob. The alarm does not stop [...]

SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: 䊊 1 Intermittent (INT) — intermittent operation can be adjusted by turning the knob toward 䊊 A (Slower) or 䊊 B (Faster) . 䊊 2 Low (L O) — continuous low speed operatio[...]

The rear window wiper and washer operate when the ignition switch is in the ON position. T urn the switch clockwise from the OFF position to operate the wiper. 䊊 1 Intermittent (INT) – intermittent operation (not adjustable) 䊊 2 ON – continuous low speed operation Push the switch forward 䊊 3 to operate the washer. The wiper will also oper[...]

HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehic[...]

Headlight beam select 䊊 1 T o select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 䊊 2 Pull the lever back to select the low beam. 䊊 3 Pulling and releasing the lever flashes the headlight high beams on and off. Battery saver system If the ignition switch is placed in the OFF position [...]

INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the headlight control switch is in the , or position. T urn the control 䊊 A to adjust the brightness of instrument panel lights when driving at night. T URN SIGNAL SWITCH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com-[...]

OFF ROAD LAMPS SWITCH (if so equipped) The off road lights are designed to increase vis- ibility when driving during off road conditions. T o turn on the off road lights: ● The covers must be removed from the off road lights. ● The headlights must be set to the high beam function. ● Press the off road lamps switch. T o turn the off road light[...]

The flashers will operate with the ignition switch placed in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. T o sound the horn, push the area between the horn icons on the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air [...]

WARNING ● Never rely solely on the hill descent control system to control vehicle speed when driving on steep downhill grades. Always drive carefully when using the hill descent control system and decel- erate the vehicle speed by depressing the brake pedal if necessary. Be espe- cially careful when driving on frozen, muddy or extremely steep dow[...]

The Electronic Locking Rear Differential (E-Lock) system can help provide added traction if the vehicle is stuck or becoming stuck. T o activate the E-Lock system: ● the 4WD switch must be in the 4L O position (4-wheel drive vehicles) , ● the vehicle must be stopped or moving at 4 mph (7 km/h) or less, and ● the E-Lock system switch must be t[...]

WARNING Pay special attention to your surround- ings when using the clutch interlock switch. The vehicle will move forward or backward according to the gear selected. The clutch interlock (clutch start) switch allows for starting the engine without depressing the clutch pedal. This feature helps you restart the engine if it stops under difficult co[...]

CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw.[...]

STORAGE TRAYS WARNING Do not place sharp objects in the trays to help prevent injury in an accident or sud- den stop. T op center tray LIC1539 A T model (if so equipped) LIC0818 MT model (if so equipped) WIC1421 STORAGE Instruments and controls 2-35[...]

CONSOLE BOX Pull up on the lever 䊊 1 to open the console box lid 䊊 2 . GLOVE BOX T o open the top portion of the glove box, push the latch 䊊 A up and raise the lid. T o open the lower portion of the glove box, pull the handle 䊊 B down and lower the lid. Use the master key to lock or unlock the glove box. The valet key cannot be used to lock[...]

CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses. MAP POCKETS SEAT POCKETS (if so equipped) A pocket is located on the back of the driver’s seat. LIC0863 LIC0575 Instruments and controls 2-37[...]

CUP HOLDERS The front cup holders have adapters that can be removed to accommodate larger cups. CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident.[...]

CARGO AREA STORAGE T o access the floor storage area, push down 䊊 1 to raise the handle, then pull up on the handle 䊊 2 to lift the luggage board. WARNING Do not drive with the luggage board teth- ered to a ceiling hook. In a sudden stop or collision, the luggage board could come loose and cause personal injury. LUGGAGE HOOKS The luggage hooks [...]

Side finisher Do not apply a load of more than 110 lb (490 N) to a single hook. Floor hooks Do not apply a load of more than 110 lb (490 N) to a single hook. LTI0140 LTI0141 2-40 Instruments and controls[...]

CARGO NETS WARNING ● Properly secure all cargo to help pre- vent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Be sure to secure all four hooks into the retainers. The cargo restrained in the net must not exceed 30 lbs. (13.6 kg) or the ne[...]

T o install the removable left-hand luggage side net 䊊 A , attach the net to the retainers. T o remove, detach the net from the retainers. The smaller left-hand luggage side net is not removable. ROOF RACK Left-hand luggage side nets LIC0867 WIC0868 2-42 Instruments and controls[...]

WARNING ● Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. ● Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or abnor- mal handling maneuvers. ● Roof rack load shou[...]

T o open the gear basket lid: 䊊 1 T urn the handle counterclockwise. 䊊 2 Raise the lid. NO TE: Cargo in the gear basket must fit with the lid closed. The maximum total load for the gear basket is 30 lb (13 kg) evenly distrib- uted. Do not force the lid closed. WARNING The lid should be closed and locked when driving. T o remove the gear basket [...]

P OWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and becom[...]

Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window . T o open the window , push the switch and hold it down 䊊 1 . T o close the window, pull the switch up 䊊 2 . Rear power window switch The rear power window switches open or close only the corresponding windows. T o open [...]

The interior lights have a three-position switch and operate regardless of ignition switch posi- tion. When the switch is in the ON position 䊊 1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after about 30 minutes unless the ignition switch is in the ACC or ON position. When the switch is in the ON positi[...]

T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. The cargo light on the overhead trim has a three- position switch. T o operate, push the switch to the desired position. ON: The light is ill[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 2 Doors ............................................3 - 3 Locking with key ................................3 - 3 Locking with inside lock knob . ...................3 - 4 Locking with power door lock sw[...]

1. T wo master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side 2. V alet key (black) with transponder chip 3. K ey number plate 4. T ransponder chip A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a[...]

When the doors are locked using one of the following methods, the doors can not be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent per[...]

LOCKING WITH INSIDE LOCK KNOB T o lock the door without the key, move the inside lock knob to the lock position 䊊 1 , then close the door. T o unlock the door without the key, move the inside lock knob to the unlock position 䊊 2 . LOCKING WITH POWER DOOR LOCK SWITCH T o lock all the doors without a key, push the door lock switch (driver or fron[...]

4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deac- tivated, the doors do not unlock when the ignition switch is placed in the OFF position. [...]

The keyfob will not function when: ● the battery is discharged ● the distance between the vehicle and the keyfob is over 33 ft (10 m) The panic alarm will not activate when the key is in the ignition switch. CAUTION Listed below are conditions or occur- rences which will damage the keyfob: ● Do not allow the keyfob, which contains electrical [...]

● When the button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a reminder that the doors are already locked. ● If a door is open and you press the button, the doors will lock but the horn will not beep and the hazard lights will not flash. The horn may or may not beep. Refer to “Silenc- in[...]

Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the keyfob for longer than 0.5 seconds. The panic alarm and headlights will stay on for 25 seconds. The panic alarm stops when: ● it has run for 25 seconds, or ● any button is pressed o[...]

䊊 1 Pull the hood lock release handle located below the driver’s side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. 䊊 3 Insert the support rod into the slot on the underside of the hood. When closing the hood, return the ho[...]

The power door lock system allows you to lock or unlock all doors including the lift gate simulta- neously . T o open the lift gate, pull up on the handle. T o close, lower and push the lift gate down se- curely . OPENING THE FUEL-FILLER LID Pull the lid to open. FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. T urn the cap counterclockwi[...]

WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. ● Do not attempt to top off the fuel tank after the fuel pump nozzle shuts of[...]

TILT OPERATION WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. Pull the lock lever forward and hold it to adjust the steering wheel up or down to the desired posi- tion. Release the lock lever to lock the steering wheel in place. 䊊 1 T o block glare from the front, swing down [...]

V ANITY MIRRORS (if so equipped) T o access the vanity mirror, pull the sun visor down and flip open the mirror cover. Some vanity mirrors are illuminated and turn on when the mirror cover is open. REARVIEW MIRROR The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in d[...]

NO TE: Do not hang any objects over the sensors 䊊 1 or apply glass cleaner to the sensors. Doing so will reduce the sensitivity of the sensors, resulting in improper operation. The indicator light will illuminate when the auto- matic anti-glare feature is operating. With the ignition switch in the ON position, press the button as described: ● T[...]

Electric control type (if so equipped) The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . Heated mirrors (Canada only) (if so equipped) Some outside [...]

MEMO 3-16 Pre-driving checks and adjustments[...]

4 Heater, air conditioner, audio and phone systems V ents ............................................4 - 2 Heater and air conditioner (manual) (T ype A) ..........4 - 2 Controls .......................................4 - 3 Heater operation ...............................4 - 4 Air conditioner operation ........................4 - 5 Air flow charts [...]

Adjust air flow direction for the driver’s side vents 䊊 1 , center vents 䊊 2 , and passenger’s side vents 䊊 3 by moving the vent slide and/or vent assem- blies. WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of other[...]

1. Fan control dial 2. T emperature control dial 3. Air flow control dial 4. Air conditioner button 5. Rear window defroster button 6. Air recirculation button CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control dial The air flow control dial allows you to select the air flow outlets. MA[...]

OFF position (Indicator light off) : Outside air is drawn into the passenger compart- ment and distributed through the selected outlet. Use the off position for normal heater or air con- ditioner operation. Air conditioner button Start the engine, turn the fan control dial to the desired (1 to 4) position and push the button to turn on the air cond[...]

● When the position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate) if the outside temperature is more than 36°F (2°C) . If the system is in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control dial is turned to OFF or the veh[...]

The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Push the button to the off position. 2. T urn the air flow control dial to the position. 3. T urn the fan control dial to the desired posi- tion. 4. Push the button. The indicator light comes on. 5. T urn the[...]

WHA0775 WHA0776 Heater, air conditioner, audio and phone systems 4-7[...]

WHA0777 WHA0778 4-8 Heater, air conditioner, audio and phone systems[...]

WHA1074 Heater, air conditioner, audio and phone systems 4-9[...]

WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot[...]

— Air flows from center and side vents. — Air flows from center and side vents and foot outlets. — Air flows mainly from foot outlets. — Air flows from defroster out- lets and foot outlets. — Air flows mainly from de- froster outlets. T emperature control dial The temperature control dial allows you to adjust the temperature of the outlet[...]

4. T urn the temperature control dial to the de- sired position. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Press the defrost/defog button . 2. T urn the fan control dial to the desired posi- tion. 3. T urn the temperature control dial to the de- sired position between the middle and th[...]

● When the position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36°F (2°C) . If the air flow control button is selected for more than one minute, the air conditioning system will con- tinue to operate until the fan control dial is t[...]

● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly . ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps pre- vent damage[...]

WHA0917 WHA0918 Heater, air conditioner, audio and phone systems 4-15[...]

WHA0919 WHA1362 4-16 Heater, air conditioner, audio and phone systems[...]

The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to [...]

Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteri[...]

Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality 4.7 in (12 cm) round disc s that ha[...]

Compact Disc with MP3 or WMA (if so equipped) T erms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track from CD-ROM can red[...]

Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software[...]

Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling fr[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil[...]

1. PRESET A·B·C button 2. CD eject button 3. MENU button 4. CD insert slot 5. CD button 6. FM·AM button 7. TUNE buttons 8. RPT button 9. PWR button/VOL control knob 10. RDM button 11. Station select (1 - 6) buttons 12. SEEK buttons T ype A WHA1075 4-24 Heater, air conditioner, audio and phone systems[...]

1. PRESET A·B·C button 2. CD eject button 3. FM·AM button 4. CD insert slot 5. CD button 6. MENU button 7. TUNE button 8. RPT button 9. PWR button/VOL control knob 10. RDM button 11. Station select (1 - 6) buttons 12. SEEK button FM/AM RADIO WITH COMPACT DISC (CD) PLAYER (T ype A and B) (if so equipped) For all operation precautions, see ⬙ Aud[...]

MENU button (BASS, TREBLE , FADE , BALANCE and CLOCK) : Press the MENU button to change the mode as follows: BAS → TRE → FA D → BAL → CL OCK → Audio → BAS T o adjust Bass, T reble, Fade and Balance, press the MENU button until the desired mode appears in the display . Press the SEEK button to adjust Bass and T reble to the desired level[...]

The FM stereo indicator, ST , illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE buttons: Manual tuning Press the TUNE or button for less than 0.5 seconds for manual tuning. T o move quickly through the channels, press and hold either TUNE or butt[...]

SEEK (Scan CDs) button: Press and hold the SEEK button for more than 1.5 seconds to scan through the first 10 seconds of a track on the compact disc. The SCAN icon is flashed during scan mode. The scan mode is canceled once it scans through all the tracks on the disc, or if the SEEK or button is pressed during the scan mode. RPT button: When the RP[...]

1. PRESET A·B·C button 2. Display screen 3. DISP/CL OCK button 4. SEEK/TRACK button 5. CD button 6. RADIO button* 7. AUX button 8. SCAN RPT button 9. CA T FOLDER button 10. L OAD button 11. CD insert slot 12. CD eject button 13. VOL control knob and PWR button 14. Station and CD select (1 – 6) buttons 15. TUNE/TRACK knob and AUDIO button *No sa[...]

FM/AM/SA T RADIO WITH COMPACT DISC (CD) CHANGER (if so equipped) For all operation precautions, see ⬙ Audio opera- tion precautions ⬙ earlier in this section. No satellite radio reception is available when the RADIO button is pressed to access satellite radio stations unless optional satellite receiver and an- tenna are installed and an XM 姞 [...]

CD display mode T o change the text displayed while playing a CD with text, press the DISP button. The DISP button will allow you to scroll through CD text as follows: Disc title ←→ T rack number ←→ T rack title. T o change the default display mode, press the AUDIO knob repeatedly until DISPLA Y MODE appears on the display , then rotate the[...]

FM/AM/SA T radio operation FM/AM/SA T band select : Pushing the RADIO button will change the band as follows: AM ←→ FM or SA T (satellite, if so equipped) When the RADIO button is pushed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the P[...]

Radio data system (RDS) : RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) . Cur- rently , most RDS stations are in large cities, but many stations are now considering broadcasting RDS data. RDS can display: ● Station call sign, such as “WHFR 98.3” . ● Statio[...]

Press and hold the CA T FOLDER button or to fast forward or rewind a track on an MP3 CD. CD select buttons: T o play another CD that has been loaded, press a CD select button (1 – 6) . SCAN/RPT: When the SCAN/RPT play button is pushed while the compact disc is played, the play pattern can be changed as follows: ALL DISC RPT → 1 DISC RPT → 1 T[...]

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a [...]

1. V olume control switch 2. Phone operation switch 3. P ower on and MODE select switch 4. T uning switch STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel. POWER on/off switch If you have the T ype A switch, with the ignition switch placed in the ACC or ON position, p[...]

ANTENNA The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise. T o install the antenna rod, turn the antenna clock- wise. Tighten the antenna rod to specification using a suitable tool such as an open-end wrench. The antenna rod tightening specification is 2.0 – 2.6 N·m (1[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the ve- hicle. Y ou can connect up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth 姞 Hands-Free[...]

IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all re- quirements of the Canadian Interference- Causi[...]

● In most cases you can interrupt the voice feedback to speak the next command by pressing the button on the steering wheel. ● T o use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press the button and after the tone say , “Call Redial.” NO TE: The combined command of Ca[...]

CONTROL BUTTONS The control buttons for the Bluetooth 姞 Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in t[...]

NO TE: Y ou must press the button within 5 seconds to change the language. 5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed. Connecting procedure NO TE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle st[...]

four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Dialing” . See “How to say num- bers” in this section for more information. 5. When you have finished speaking the phone number, the system repeats it back and an- nounces the available commands. 6. Say: “Dial” 䊊 D . The system acknowledg[...]

(Speak Digits) 䊊 B When prompted by the system, say the number you wish to call. Refer to “How to say numbers” and “Making a call by entering a phone number” in this section for more details. “Special Number” 䊊 C For dialing more than 10 digits or any special characters, say “Special Number” . When the system acknowledges the co[...]

“Phonebook” (phones without automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “T ransfer Entry” 䊊 A “Delete Entry” 䊊 B “List Names” 䊊 C For phones that do not support automatic down- load of the phonebook (PBAP Bluetooth 姞 [...]

“Phonebook” (phones with automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “List Names” 䊊 A “T ransfer Entry” 䊊 B “Delete Entry” 䊊 C “Record Name” 䊊 D For phones that support automatic download of the phonebook (PBAP Bl[...]

The system repeats the number and prompts you for the next command. When you have finished entering numbers or transferring an entry , choose “Store.” The system confirms the name, location and number. “Delete Entry” 䊊 C Use the Delete Entry command to erase one entry from the phonebook. After the system rec- ognizes the command, speak th[...]

SPEAKER ADAPTATION (SA) MODE Speaker Adaptation allows up to two out-of- dialect users to train the system to improve rec- ognition accuracy . By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different speaker adaptation model for each connected[...]

● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five one ● record name ● four three pause two nine pause zero ● delete redial number ● phonebook list names ● call eight oh five four one ● corr[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 On-pavement and off-road driving precautions ....................................5 - 5 Avoiding collisi[...]

Special winter equipment ....................... 5-36 Driving on snow or ice . ........................ 5-36 Engine block heater (if so equipped) ............. 5-37[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do [...]

● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h) . Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatically turn off when the tire pressure of all 4 tires are adjusted. After the tires are inflat[...]

Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle. FCC Notice: Changes or modifications not expressly ap- p[...]

OFF-ROAD RECOVERY While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by follow- ing the procedure below . Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the con- ditions of the vehicle, road and tra[...]

DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream re- duces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others. Additionally, if you are injured in an a[...]

● Unsecured cargo can be thrown around when driving over rough terrain. Prop- erly secure all cargo so it will not be thrown forward and cause injury to you or your passengers. ● T o avoid raising the center of gravity ex- cessively, do not exceed the rated capac- ity of the roof rack/gear bin (if so equipped) and evenly distribute the load. Se[...]

WARNING ● Never remove the ignition key or place the ignition switch in the LOCK position while driving. The steering wheel will lock (for models with a steering lock mechanism) . This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or per- sonal injury. AUTOMATIC TRANSMISSION (if so equipped) The ig[...]

There is an OFF position between the LOCK and ACC positions. The OFF position is indicated by a “1” on the ignition switch. When the ignition is in the OFF position, the steering wheel is not locked (for mod- els with a steering lock mechanism) . In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from [...]

NISSAN VEHICLE IMMOBILIZER SYSTEM The NISSAN V ehicle Immobilizer system will not allow the engine to start without the use of the registered key . If the engine fails to start using a registered key (for example, when interference is caused by another registered key , an automated toll road device or automatic payment device on the key ring) , res[...]

● If the engine is very hard to start in ex- tremely cold weather or when restarting, depress the accelerator pedal a little (ap- proximately 1/3 to the floor) and hold it and then crank the engine. Release the key and the accelerator pedal when the engine starts. ● If the engine is very hard to start because it is flooded, depress the accelera[...]

T o move the shift selector: : Push the button while depressing the brake pedal : Push the button to shift : Shift without depressing brake pedal Shifting After starting the engine, fully depress the brake pedal and move the shift selector out of the P (Park) position. WARNING Apply the parking brake if the shift selec- tor is in any position while[...]

D (Drive) : Use this position for all normal forward driving. 3 (Third gear) : Use this position for driving up and down long slopes where engine braking would be advanta- geous. Do not downshift into the 3 position at speeds over the following and do not exceed the follow- ing speeds in the 3 position. 2WD: 99 MPH (160 km/h) 4H: 99 MPH (160 km/h) [...]

T o push the shift lock release, complete the fol- lowing procedure: 1. Place the ignition switch in the L OCK posi- tion and remove the key . 2. Apply the parking brake. 3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push down. 5. Move the shift selector to the N (Neutral) position[...]

OFF: For driving up and down long slopes where engine braking is nec- essary push the Overdrive switch once. The O/D OFF indicator light in the instrument panel comes on at this time. When cruising at a low speed or climbing a gentle slope, you may feel uncomfortable shift shocks as the transmission shifts into and out of Overdrive repeatedly . In [...]

T o back up depress the shift selector and then move it to the R (Reverse) position after stopping the vehicle completely . If it is difficult to move the shift selector into R (Reverse) or 1 (First) , shift into N (Neutral) , then release the clutch pedal. Fully depress the clutch pedal again and shift into R (Reverse) or 1 (First) . If your vehic[...]

WARNING ● Be sure the parking brake is fully re- leased before driving. Failure to do so can cause brake failure and lead to an accident. ● Do not release the parking brake from outside the vehicle. ● Do not use the shift selector in place of the parking brake. When parking, be sure the parking brake is fully engaged. ● Do not leave childre[...]

● The SET indicator light may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET , or CANCEL switch (located on the steering wheel) . T o properly set the cruise control system, use the following pro- cedures. WARNING Do not use the cruise control when driving under the following conditions: ● When it [...]

T o reset at a faster cruising speed, use one of the following three methods. ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. ● Push and hold the ACCEL/RES switch. When the vehicle attains the speed you de- sire, release the switch. ● Push and release the ACCEL/RES switch. Ea[...]

● When cruising at highway speeds, it is more economical to use the air conditioner and leave the windows closed to reduce drag. ● For vehicles equipped with , use 4H or 4L position only when necessary . Four- wheel drive operation lowers fuel economy . WARNING ● For 4WD equipped vehicles, do not at- tempt to raise two wheels off the ground a[...]

T RANSFER CASE SHIFTING PROCEDURES The part time 4WD system provides 3 positions (2WD, 4H and 4L O) , so you can select the desired drive mode according to the driving con- ditions. 2WD or 4WD shift procedure: 4WD Shift Switch Position Wheels Driven Indicator Light Use Conditions 4WD Shift Procedure 4WD shift T ransfer 4L O position 2WD Rear wheels[...]

*1: Before moving the shift selector from neutral, wait until the 4L O indicator light stays on steady. This indicates that the 4WD shift procedure is completed and the transfer gear is correctly set in the 4L O position. If the vehicle is shifted into gear before the indicator is on steady, the transfer gear may grind, not engage correctly or stay[...]

The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are three types of drive modes available, 2WD, 4H and 4L O. The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, 4H and 4L O. T o change into or out of 4LO, the vehi[...]

When the vehicle is stuck, ● Set the 4WD shift switch to 4H or 4L O. ● Use the Electronic Locking Rear Differential (E-Lock) system (if so equipped) . T urn the switch ON while the vehicle is stationary and apply the throttle to try to free the vehicle. ● If it is difficult to free the vehicle, rock the vehicle back and forth between reverse [...]

4WD shift indicator light The 4WD shift indicator light is located in the odometer display . The light should turn off within 1 second after turning the ignition switch to the ON position. While the engine is running, the 4WD shift indi- cator light will illuminate the position selected by the 4WD shift switch. ● The 4WD shift indicator light may[...]

● When the warning light comes on, the 2WD mode may be engaged even if the 4WD shift switch is in 4H . Be especially careful when driving. If corresponding parts are malfunctioning, the 4WD mode will not be engaged even if the 4WD shift switch is shifted. ● Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driv- ing [...]

WARNING ● Never leave the E-Lock system ON when driving on paved or hard-surfaced roads. T urning the vehicle may result in the rear wheels slipping and result in an accident and personal injury. After us- ing the E-Lock system to free the ve- hicle, turn the system OFF . ● Use the E-Lock system only when free- ing a stuck vehicle. T ry the 4LO[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for automatic transmission models or in an appropriate gear for manual transmis- sion models. [...]

The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds. WARNING If the engine is not running or is turned off while driving, the [...]

This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on [...]

pedal. This is normal and does not indicate a malfunction. If the computer senses a malfunc- tion, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then operates normally , but without anti-lock assistance. If the ABS warning light illuminates during the self-test or while driving, have the veh[...]

The VDC system can help the driver to maintain control of the vehicle, but it can not prevent loss of vehicle control in all driving situations. When the VDC system operates, the SLIP indi- cator in the instrument panel flashes so note the following: ● The road may be slippery or the system may determine some action is required to help keep the v[...]

● When driving on extremely inclined sur- faces such as higher banked corners, the VDC system may not operate prop- erly and the SLIP indicator may flash or both the SLIP and indicator lights may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the SLIP indicat[...]

WARNING ● Never rely solely on the hill start assist system to prevent the vehicle from mov- ing backward on a hill. Always drive carefully and attentively. Depress the brake pedal when the vehicle is stopped on a steep hill. Be especially careful when stopped on a hill on frozen or muddy roads. Failure to prevent the vehicle from rolling backwar[...]

DRAINING OF COOLANT WATER If the vehicle is to be left outside without anti- freeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” in the “Maintenance and do-it-yourself” section of this manual. TIRE EQUIPMENT 1. SUMMER tires have a tread designed to pro[...]

ENGINE BLOCK HEATER (if so equipped) WARNING ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. Y ou can be se- riously injured by an electrical shock if you use an ungrounded connection. ● Disconnect and properly store the en- gine block heater cord before starting the engine. Damage to the cord [...]

MEMO 5-38 Starting and driving[...]

6 In case of emergency First aid kit (if so equipped) .........................6 - 2 Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 3 Jump starting .....................................6 - 8 Push starting ........................[...]

A first aid kit is located on the back door trim panel. T o remove the first aid kit: 䊊 1 Squeeze the latch buttons. 䊊 2 Pull the two straps apart to unfasten. TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low [...]

WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious[...]

Blocking wheels Place suitable blocks 䊊 1 at both the front and back of the wheel diagonally opposite the flat tire 䊊 2 to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. Getting the spare tire and tools 1. Fold the rear bench seat cushion forward. R[...]

4. Fit the square end of the jack rod into the square hole of the wheel nut wrench to form a handle. 5. Seat the T -shaped end of the jack rod into the T -shaped opening of the tire winch. Ap- ply pressure to keep the jack rod engaged in the spare tire winch and turn the jack rod counterclockwise to lower the spare tire. 6. Once the spare tire is c[...]

2. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. The front tire jack -up points are indicated by stamped arrows on the side of the frame. The jack should be used on firm and level ground. 3. Install the assembled jack rod into the jack as shown. 4. T o lift the veh[...]

Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger [...]

T o start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always present in the vicinity of the battery. Keep all sparks [...]

WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift se- lector t[...]

CAUTION ● Do not push start this vehicle. The three-way catalyst may be damaged. ● Automatic transmission models cannot be push-started or tow-started. At- tempting to do so may cause transmis- sion damage. ● For manual transmission models, never try to start the vehicle by towing it. When the engine starts, the forward surge could cause the [...]

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect[...]

T OWING RECOMMENDED BY NISSAN T wo-wheel drive models NISSAN recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow automatic transmission models with the rear wheels on the ground or four wheels on the ground (forward or backward) , as this [...]

Four-wheel drive models NISSAN recommends that towing dollies be used when towing your vehicle or place the ve- hicle on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of the wheels on the ground as this may cause serious and expensive damage to the transfer case and transmission. V EHICLE RECOVERY (freeing a stuck vehicle) [...]

CAUTION ● T ow chains or cables must be attached only to the main structural members of the vehicle or the towing hooks (if so equipped) . Otherwise, the vehicle body will be damaged. ● Use the towing hook (if so equipped) only to free a vehicle stuck in sand, snow, mud, etc . Never tow the vehicle for a long distance using only the tow- ing ho[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBODY In areas where road salt is used in winter, it is necessary to clean the und[...]

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather[...]

Floor mat positioning aid This vehicle includes a front floor mat bracket to act as a floor mat positioning aid. NISSAN floor mats have been specially designed for your ve- hicle model. The driver’s and passenger’s side floor mats have a grommet hole incorporated in them. P osition the mat by placing the floor mat bracket hook through the floor[...]

T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PROTECT YOUR VEHICLE [...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ..........[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent [...]

VQ40DE engine 1. Window washer fluid reservoir 2. Fuse/fusible link box 3. Fuse and relay box 4. Engine oil filler cap 5. Engine oil dipstick 6. Brake fluid reservoir/Clutch fluid reservoir (M/T model) 7. Air cleaner 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Battery 12. Engine coolant reservoir LII0167 ENGINE CO[...]

The engine cooling system is filled at the factory with Genuine NISSAN Long Life Antifreeze/Coolant to provide year-round anti- freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary . WARNING ● Never remove the radiator or coolant reservoir cap [...]

If the cooling system frequently requires coolant, have it checked by a NISSAN dealer. CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● T o avoid the danger of being[...]

CAUTION Oil level should be checked regularly. Op- erating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it o[...]

6. Clean and reinstall the drain plug and a new washer. Securely tighten the drain plug with a wrench. Do not use excessive force. Drain plug tightening torque: 22 - 29 ft-lb (29 - 39 N·m) 7. Refill engine with recommended oil through the oil filler opening, then install the oil filler cap securely . See “Capacities and recommended fuel/lubrican[...]

When checking or replacement is required, we recommend your NISSAN dealer for servicing. CAUTION ● Use Genuine NISSAN Matic S A TF . If Genuine NISSAN Matic S A TF is not available, Genuine NISSAN Matic J A TF may also be used. ● Using automatic transmission fluid other than Genuine NISSAN Matic S A TF or Matic J A TF will cause deteriora- tion[...]

For further brake and clutch fluid specification information, refer to “Capacities and recom- mended fuel/lubricants” in the “T echnical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake and clutch (if so equipped) systems. The[...]

WINDSHIELD-WASHER FLUID RESERVOIR Fill the windshield-washer fluid reservoir periodi- cally . Add windshield-washer fluid when the low windshield-washer fluid warning light comes on. T o fill the windshield-washer fluid reservoir, lift the cap off the reservoir tank and pour the win- dow washer fluid into the tank opening. Add a washer solvent to t[...]

● Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce bat- tery life, and in some cases lead to an explosion. ● When working on or near a battery, al- ways wear suitable eye protection and remove all jewelry. ● Battery posts, terminals and rela[...]

V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting is necessary , see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN de[...]

1. P ower steering fluid pump 2. Automatic belt tensioner 3. Cooling fan 4. Air conditioner compressor 5. Crankshaft pulley 6. Generator WARNING Be sure the ignition key is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness[...]

WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance. The air cleaner filter should not be cleaned and reused. Repl[...]

T o replace the filter, perform the following proce- dure: 1. Open the glove box and press in on the sides so that it will open completely allowing it to hang by the cord. 2. Remove the filter cover bolt and remove the filter cover. LDI0442 LDI0387 8-18 Maintenance and do-it-yourself[...]

NO TE: The filters are marked with air flow arrows. The end of the filter with the arrow should face the rear of the vehicle. The arrows should face downward. 3. Insert the first filter into the housing and slide it over to the right. Insert the second filter into the housing. 4. Replace the filter cover. 5. Install the glove box door. CLEANING If [...]

6. Return the wiper to its original position and release it until it has made contact with the windshield. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arms may be dam- aged from wind pres[...]

Rear window wiper blade 䊊 1 Lift the wiper arm away from the rear win- dow . 䊊 2 Push the wiper blade in and pivot until the blade becomes free. 䊊 3 Insert a new blade onto the wiper arm and snap into place. WDI0292 Maintenance and do-it-yourself 8-21[...]

If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to norma[...]

If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely . T ype B fuses cannot be installed in the under- hood fuse boxes. Only use type A fuses in the underhood f[...]

5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only genuine NI[...]

CAUTION Be careful not to allow children to swallow the battery or removed parts. T ype B LDI0456 BATTERY REPLACEMENT Maintenance and do-it-yourself 8-25[...]

K EYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across the contact points will seri- ously deplete the storage capacity . ● Do not to[...]

FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interfere[...]

Removing the headlight bulb 1. Open the hood. 2. Disconnect the negative (-) battery cable. 3. Disconnect the electrical connector from the rear end of the bulb. 4. T urn the bulb retaining ring counterclock- wise until it is free from the headlight reflec- tor and then remove it 䊊 A . 5. Carefully remove the headlight bulb. Do not shake or rotat[...]

EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* 1 Headlight 65/55 9007 (HB5) T urn signal light/Parking light 29/8 3457AK Side marker 3.8 194 Off road lights* 2 —— Rear combination light T urn signal 27 3156AK Stop/T ail — T20 Back -up 18 921 License plate light 5 168 Fog light (if so equipped)* 2 55 H11 Interior light 8 AL48 Map lig[...]

1. Map lights 2. Off road lights (if so equipped) 3. Interior light 4. Fog light (if so equipped) 5. Headlight assembly 6. Cargo light 7. High-mount stoplight 8. Rear combination light 9. License plate light Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens and/or cover. : Indicates [...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Map lights LDI0478 Interior light/Cargo light WDI0206 Rear combination light LDI0448 Maintenance and do-it-yourself 8-31[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, one or more o[...]

● Before taking a long trip, or whenever you heavily load your vehicle, use a tire pressure gauge to ensure that the tire pressures are at the specified level. ● For additional information re- garding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Infor- mation Booklet. Tir[...]

䊊 6 Spare tire size or compact spare tire size (if so equipped) . Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the [...]

Size Cold Tire Infla- tion Pressure Front Original Tire: P265/65R17 110T P265/70R16 111T P265/75R16 114T 240 kPa, 35 PSI Rear Original Tire: P265/65R17 110T P265/70R16 111T P265/75R16 114T 240 kPa, 35 PSI Spare Tire: P265/65R17 110T P265/70R16 111T P265/75R16 114T 240 kPa, 35 PSI TIRE LABELING Federal law requires tire manufacturers to place standa[...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on you[...]

Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

The tire pressure and wheel alignment should also be checked and corrected as necessary . Contact a NISSAN dealer. Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be bal- anced as required. Wheel balance service should be per- formed with the whe[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ...............................[...]

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 21-1/8 gal 17-5/8 gal[...]

FUEL RECOMMENDATION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be [...]

E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) . Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the a[...]

ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve [...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model VQ40DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.622 (95.5 x 92) Displacement cu in (cm 3 ) 241.30 (3,954) Firing order 1–2–3–4–5–6 Idle speed See the “Emission Control Information label” on the under- side of the hood. A/T (in “N” position)[...]

WHEELS AND TIRES Wheels 16 x 7.0J 17 x 7.5J Tires P265/70R16 P265/75R16 P265/65R17 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length in (mm) 178.7 (4,539) Overall width in (mm) 72.8 (1,849) Overall height (4wd model) in (mm) 74.9 (1,902) Front T rack in (mm) 61.8 (1,570) Rear T rack in (mm) 61.8 (1,570) Wheelbase in (mm) 106.3 (2,700) Gros[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V.S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weigh[...]

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. Use the following step to mount the front license plate: ● Attach the license pla[...]

WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a se[...]

V EHICLE LOAD CAPACITY Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Load- ing Information label. T o get “the combined weight of occu- pants and cargo” , add[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

● The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Y our child could be seri- ously injured or killed in a collision if the top tether strap is damaged. ● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of you[...]

2. Insert (at any position) 2 channel tie-down hooks 䊊 A into the channel opening 䊊 B of each channel and slide to the desired posi- tion. 3. Hand tighten each hook until it is securely fixed to the channel. 4. T o reposition the channel tie-down hook un- screw the hook loop from the hook plate (2 revolutions) , move to a new location, and reti[...]

LOADING TIPS ● The GVW must not exceed GVWR or GA WR as specified on the F .M.V .S.S./C.M.V .S.S. certification label. ● Do not load the front and rear axle to the GA WR. Doing so will exceed the GVWR. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seat-[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power. V ehicle speed may decrease under [...]

T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighe[...]

Remember to keep trailer tongue weight be- tween 10 - 15% of the trailer weight or within the trailer tongue load specification recommended by the trailer manufacturer. If the tongue load becomes excessive, rearrange the cargo to ob- tain the proper tongue load. Do not exceed the maximum tongue weight specification shown in the “T owing load/spec[...]

WARNING T railer hitch components have specific weight ratings. Y our vehicle may be ca- pable of towing a trailer heavier than the weight rating of the hitch components. Never exceed the weight rating of the hitch components. Doing so can cause serious personal injury or property damage. Hitch ball Choose a hitch ball of the proper size and weight[...]

WARNING Properly adjust the weight distributing hitch so the rear of the bumper is no higher than the measured reference height when the trailer is attached. If the rear bumper is higher than the measured reference height when loaded, the vehicle may handle unpredictably which could cause a loss of vehicle control and cause serious personal injury [...]

Safety chains Always use suitable safety chains between your vehicle and the trailer. The safety chains should be crossed and should be attached to the hitch, not to the vehicle bumper or axle. Be sure to leave enough slack in the chains to permit turning corners. T railer lights CAUTION When splicing into the vehicle electrical system, a commercia[...]

Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for improper tongue load, overload, worn suspension or other possible causes of either condition. ● Always secure items in the trailer to prev[...]

T o drive away: 1. Start the vehicle. 2. Apply and hold the brake pedal. 3. Shift the transmission into gear. 4. Release the parking brake. 5. Drive slowly until the vehicle and trailer are clear from the blocks. 6. Apply and hold the brake pedal. 7. Have someone retrieve and store the blocks. ● While going downhill, the weight of the trailer pus[...]

● Some states or provinces have specific regulations and speed limits for vehicles that are towing trailers. Obey the local speed limits. ● Check your hitch, trailer wiring harness con- nections, and trailer wheel lug nuts after 50 miles (80 km) of travel and at every break. ● When launching a boat, don’t allow the wa- ter level to go over [...]

DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 T raction A A T emperature A T readwear The treadwear gr[...]

Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle. If you did not receive a W arranty Information Booklet, or it i[...]

WARNING Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws. 1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- ating temperature) . 2. Accelerate the vehicle to 55 M[...]

T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manu- facturer and NISSAN dealer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have ac- cess to the vehicle or the EDR. EDR data will only be acce[...]

Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. T ell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts. NISSAN does n[...]

MEMO 9-34 T echnical and consumer information[...]

10 Index 4WD warning light .............. .2-15 A Active brake limited slip (ABLS) system . . .5-32 Air bag (See supplemental restraint system) .................... .1-44 Air bag system Front (See supplemental front impact air bag system) .............. .1-52 Air bag warning labels ............ .1-58 Air bag warning light .......... .1-59, 2-17 Air[...]

C.M.V .S.S. certification label ......... .9-10 Cold weather driving ............. .5-35 Compact disc (CD) player .......... .4-27 Console box .................. .2-36 Controls Audio controls (steering wheel) ...... .4-36 Heater and air conditioner controls . .4-2, 4-10 Coolant Capacities and recommended fuel/lubricants ................ .9-2 Changi[...]

G G a s c a p .................... .3-10 Gauge Engine coolant temperature gauge .... .2-6 Engine oil pressure gauge ......... .2-8 Fuel gauge .................. .2-7 Odometer .................. .2-4 Speedometer ................ .2-4 T achometer ................. .2-6 T rip computer ................ .2-5 T rip odometer ................ .2-4 V oltmet[...]

Power door locks .............. .3-4 Low fuel warning light ............. .2-15 Low tire pressure warning light ........ .2-15 Low windshield-washer fluid warning light . . .2-17 Luggage hook ................. .2-39 Luggage rack (see roof rack) ......... .2-42 Luggage (See vehicle loading information) . .9-12 Luggage storage (see vehicle loading in[...]

Rear window and outside mirror defroster switch ...................... .2-25 Rear window wiper and washer switches . . .2-25 Recorders Event data ................. .9-31 Refrigerant recommendation .......... .9-6 Registering your vehicle in another country . . .9-9 Remote keyless entry system .......... .3-5 Reporting safety defects (US only) .....[...]

T emperature gauge Engine coolant temperature gauge .... .2-6 Theft (NISSAN vehicle immobilizer system) , engine start ............ .2-23, 3-2, 5-11 Three-way catalyst ............... .5-2 Tilting steering wheel ............. .3-12 Tire Flat tire .................... .6-2 Spare tire .................. .6-4 Tire and Loading Information label .... .9[...]

RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be us[...]

® 2010 X T ERR A OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2010 N I SSAN XTE R RA N50-D Printing : February 2010 (10) Publication No.: OM0E 0N50U1 Printed in U .S.A. N50-D[...]