Nissan 2011 Maxima инструкция обслуживания

® 2011 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2011 N IS SAN MAX I MA A35-D Printing : August 2010 (05) Publication No.: Printed in U .S.A. A35-D OM1E 0A35U0[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and with- ou[...]

BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon and Clarion. Gracenote 威 is a registered trademark of Gracenote, Inc. The Gracenote logo and logo type, and the “Powered by Gracenote” logo are trademarks of Gracenote. XM Radio 威 requires subscription, sold separately. Not available in Alaska, Hawaii [...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. T op tether strap anchor (P . 1-33) 2. Head restraints (P . 1-7) 3. Rear seat belts (P . 1-11) 4. Roof-mounted curtain side-impact supplemental air bag (P . 1-37) 5. Front seat-mounted side-impact supplemental air bags (P . 1-37) 6. Head Restraints (P . 1-7) 7. Front seat belts (P . 1-11) 8. Supplemental front-impact air bags (P . 1-37) 9. Seats[...]

1. Engine hood (P . 3-18) 2. Windshield wiper and washer switch (P . 2-26) 3. Windshield (P . 8-19) 4. Moonroof (if so equipped) (P . 2-45) 5. P ower windows (P . 2-42) 6. Door locks, NISSAN Intelligent K ey™, keys, request button (P . 3-4, 3-2, 3-2, 3-2) 7. Mirrors (P . 3-26) 8. Tire pressure (P . 8-31) 9. Flat tire (P . 6-2) 10. Tire chains (P [...]

1. Rear window defroster switch (P . 2-27) 2. Interior trunk lid release (P . 3-20) 3. T runk lid (P . 3-18) 4. V ehicle loading (P . 9-12) 5. Exterior trunk lid release/request button (P . 3-13) 6. Replacing bulbs (P . 8-29) 7. Fuel-filler cap, fuel recommendation (P . 3-21, P . 9-3) 8. Fuel-filler door (P . 3-21) 9. Child safety rear door locks ([...]

1. Interior trunk access (P . 1-5) 2. Moonroof (if so equipped) (P . 2-45) 3. Sun visors (P . 3-25) 4. Interior lights, illuminated entry (P . 2-49) 5. HomeLink 姞 universal transceiver (if so equipped) (P . 2-52) 6. Interior mirrors (P . 3-26) 7. Glove box (P . 2-40) 8. Cup holders (P . 2-38) 9. Console box (P . 2-40) 10. Front seat (P . 1-2) 11.[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (P . 4-113, 4-115) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-37, P . 2-33) 6. Security indicator light (P . 2-24) 7. Cruise con[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-36) Outside mirror controls (P . 3-28) Heated steering wheel switch (if so equipped) (P . 2-34) T runk lid release switch (P . 3-20) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. Illustrated ta[...]

1. P ower steering fluid reservoir (P . 8-12) 2. Engine oil filler cap (P . 8-9) 3. Brake fluid reservoir (P . 8-13) 4. Air cleaner (P . 8-18) 5. Fuse block (P . 8-21) 6. Battery (P . 8-14) 7. Fuse/fusible link box (P . 8-21) 8. Engine oil dipstick (P . 8-9) 9. Radiator cap (P . 8-7) 10. Drive belt location (P . 8-17) 11. Engine coolant reservoir *[...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-11 or Brake warning light 2-11 Charge warning light 2-11 Engine oil pressure warning light 2-12 Low tire pressure warning light 2-12 Master warning light 2-13 W arning light Name Page Seat belt warning light and chime 2-13 Supplemental air bag warning light 2-13 Indicator [...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front power seat adjustment .....................1 - 3 Folding rear seat (if so equipped) .................1 - 5 Head restraints .................................1 - 7 Seat belts ....................................... 1-11 Precaut[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

FRONT POWER SEAT ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery . See “ Automatic drive posi[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down (manual) or move the switch forward or backward (power) to adjust the seat lumbar area.[...]

Thigh extension (driver’s side only , if so equipped) Pull up and hold the lever to extend the front portion to the desired position. FOLDING REAR SEAT (if so equipped) Interior trunk access For models without a rear center console, the trunk can be accessed from the passenger side of the rear seat for loading and unloading, as shown. 䊊 1 Press[...]

● When returning the seatbacks to the upright position, be certain they are completely secured in the latched posi- tion. If they are not completely secured, passengers may be injured in an acci- dent or sudden stop. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they c[...]

Center armrest Pull the armrest down until it is horizontal. HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses th[...]

Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. LRS0887 WRS0134 LRS0888 1-8 Safety—Seats, seat belts and supplemental restraint system[...]

T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the veh[...]

Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occu- pant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries[...]

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up e[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulle[...]

Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly .[...]

WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chanc[...]

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way [...]

LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) . A booster seat should be used to obtain proper seat belt fit. NISSAN recom[...]

WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions [...]

This vehicle is equipped with a universal child restraint anchor system, referred to as the LA T CH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors. For details, see “LA T CH (Lower Anchors and T ethers for CHildren) sys- tem” later i[...]

LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA T CH system compatible child restraints only at the locations shown in the illustration. – Do not[...]

When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts. See “In- stalling top tether str[...]

2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the cente[...]

4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in[...]

WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the opera- tion of[...]

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slac[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head re- straint to obtain the correct child restraint fit. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See “Head restraints” in thi[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in[...]

2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head re- straint to obtain the correct child restraint fit. If the head restraint is removed, store it in a secure plac[...]

5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. Tighten the tether strap ac[...]

9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 8. 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see[...]

3. Secure the tether strap to the tether anchor point on the rear parcel shelf. 4. Refer to the appropriate child restraint in- stallation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. BOOSTER SEATS Precautions on booster seat[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. P osition the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s in- structions. 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adj[...]

7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light may or may not illuminate, depending on the size of the child and the type of booster seat being used. See “Front passenger air bag and status light” later in this section. PRECAUTIONS ON SUPPLE[...]

WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations ARS1133 ARS1041 Safety—Seats, seat belts and supplemental restraint system 1-39[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ARS1042 ARS1043 ARS1044 1-40 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details. WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain s[...]

WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front s[...]

SSS0159 SSS0162 Safety—Seats, seat belts and supplemental restraint system 1-43[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag modules 6. Crash zone sensor 7. Occupant classification system control unit 8. Seat belt buckle[...]

The NISSAN Advanced Air Bag System has dual stage inflators. It also monitors information from the crash zone sensor, the Air Bag Control Unit (ACU) , seat belt buckle sensors and the occu- pant classification sensor (pattern sensor) . Infla- tor operation is based on the severity of a colli- sion and seat belt usage for the driver. For the front p[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

Front passenger seat adult occupants who are properly seated and using the seat belt as outlined in this manual should not cause the passenger air bag to be automatically turned OFF . For small adults it may be turned OFF , however if the occu- pant takes his/her weight off the seat cushion (for example, by not sitting upright, by sitting on an edg[...]

Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such ob- jects may become dangerous projec- tiles and cause injury if the front air bags inflate. ● Immedia[...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to [...]

● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and cur[...]

The pretensioner system activates in conjunction with the front air bag system. W orking with the seat belt retractor, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased within the seat belt retractor. These seat belts are used the sa[...]

SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact supplemental air bag and seat belt pretensioner systems. The monitored circuits inclu[...]

● The front air bag, side air bag, curtain air bag systems and the pretensioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of the supple- mental air bag or pretensioner systems or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal pro[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge ...............2 - 5 Fuel gauge ....................................2 [...]

P ower windows ............................... 2-42 Moonroof (if so equipped) ......................... 2-45 Automatic moonroof ........................... 2-45 Dual Panel Moonroof (if so equipped) ............... 2-46 Automatic moonroof ........................... 2-46 Rear power sun shade (if so equipped) ............. 2-49 Interior light .......[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (P . 4-113, 4-115) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-37, P . 2-33) 6. Security indicator light (P . 2-24) 7. Cruise con[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-36) Outside mirror controls (P . 3-28) Heated steering wheel switch (if so equipped) (P . 2-34) T runk lid release switch (P . 3-20) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. 1. T achometer[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer 䊊 1 records the total distance the vehicle has been driven. The twin trip odometer 䊊 2 records the distance of individual [...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERATURE GAUGE The gauge ind[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition is placed in the OFF position. The low fuel warning light comes on when the amount of fuel in the tank is getting low . Refill t[...]

COMPASS DISPLAY Push the button for about 1 second when the ignition switch is placed in the ON position to toggle the outside temperature and compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading. N: North E: East S: South W: W est If the display reads “C” , calibrate the compass by driv[...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 8 second[...]

1. With the display turned on, press and hold the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) . 3. After completing the circles, the display should return to normal. CAUTION ● Do not install a ski rack,[...]

or Anti-lock Braking System (ABS) warning light Supplemental air bag warning light Security indicator light or Brake warning light Continuously V ariable T ransmission (CVT) indicator light Side light and headlight indicator light (green) Charge warning light Continuously V ariable T ransmission (CVT) position indicator light Slip indicator light E[...]

or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning [...]

CAUTION ● Do not ground electrical accessories directly to the battery terminal. Doing so will bypass the variable control sys- tem and the vehicle battery may not charge completely. Refer to “V ariable voltage control system” in the “Mainte- nance and do-it-yourself” section later in this manual. ● Do not continue driving if the genera[...]

For additional information, see “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” section and “Tire pressure” in the “Mainte- nance and do-it-yourself” section in this manual. WARNING ● If the light does not illuminate with the ignition switch in the ON position, have the vehicle checked by a NISSAN dealer as [...]

If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and preten- sioner seat belt systems need servicing and your vehicle must be taken to a NISSAN dealer: ● The supplemental air bag warning light re- mains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently . [...]

The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly , and that the vehicle has at least 3 gallons (11.4 liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if n[...]

Slip indicator light This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery . T urn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated. Both lights flash when the haza[...]

The vehicle information display 䊊 1 is located on the bottom of the speedometer. It displays such items as: ● Intelligent K ey operation information ● some indicators and warnings ● other information For details about the Intelligent K ey, see “NISSAN Intelligent K ey™” in the “Pre-driving checks and adjustments” section. HOW TO U[...]

Average speed mode The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset. Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance driven since the last reset. Range mode The range mode can be selected to give you an estimation of the distance that c[...]

Exterior temperature mode The exterior temperature mode can be selected to provide you with the temperature outside of your vehicle. Setting mode The setting mode allows you to set reminders or preferences for alerts, maintenance intervals or language displays. In the setting mode screen press to move to: ● Alert ● Maintenance ● Options and p[...]

Reset mode The reset mode can be selected in any screen that allows for preferences to be programmed. Once the screen is selected, you have the option to reset the selected distances or time to a new setting. Maintenance mode The maintenance mode allows you to set alerts for the reminding of maintenance intervals for the following: ● engine oil ?[...]

Y ou can select the language, unit or change the dial effects by using the button and pressing . The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button. Warning mode The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of [...]

V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning 6. Parking brake warning 7. Shift P warning 8. Engine start operation indicator 9. NISSAN Intelligent K ey™ insertion indicator 10. NISSAN Intelligent K ey™ removal indi[...]

Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning After the Shift P warning illuminates, the Push warning will illuminate if the ignition switch is placed in the ACC position when the shift selec- tor is moved to the P (Park) position. See “Shift P warning” in [...]

NISSAN Intelligent Key™ insertion indica- tor This indicator illuminates when the Intelligent K ey needs to be inserted into the Intelligent K ey port. (For example, the Intelligent K ey battery is dis- charged.) If this indicator illuminates, insert the Intelligent K ey into the Intelligent Key port in the correct direction. See “Push-button i[...]

ways secure your vehicle even if parking for a brief period. Never leave your Intelligent K ey in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible. Many devices offering additional protection, such as component locks, identification markers, and tracking sy[...]

4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices. Statement related to Section 15 of FCC Rules for NISSAN V ehicle Immobilizer[...]

NO TE: Y ou can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with navigation system. Refer to “Comfort settings” in the “Monitor, climate, audio, phone and voice recogni- tion systems” section. 䊊 2 Low — continuous low speed operation 䊊 3 High — continuous high speed operation Push the l[...]

NO TE: The top few rows of wires on the rear win- dow are not part of the rear window de- froster system. These wires make up the antenna for the audio system. X ENON HEADLIGHTS (if so equipped) WARNING Ꮨ HIGH VOL TAGE ● When xenon headlights are on, they produce a high voltage. T o prevent an electric shock, never attempt to modify or disassem[...]

HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehic[...]

Autolight system The autolight system allows the headlights to be set so they turn on and off automatically . The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark. ● T urn off all the lights when it is light. ● K eep all the lights on for 45 seconds[...]

Headlight beam select 䊊 1 T o select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 䊊 2 Pull the lever back to select the low beam. 䊊 3 Pulling and releasing the lever flashes the headlight high beams on and off. Battery saver system If the ignition switch is placed in the OFF position [...]

INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the igni- tion switch is in the ON position. The instrument brightness control operates when the headlight control switch is in the AUT O, or position. T urn the control left or right to adjust the bright- ness of the instrument panel lights when driving at night. The instrument [...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

The front seats are warmed by built-in heaters. The switch is located on the center console. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as lo[...]

NO TE: If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction. The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from the surface of the seat. The climate control switch is located on the [...]

● The climate controlled seat has an air filter. Do not operate the climate con- trolled seat without an air filter. This may result in damage to the system. ● When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials. ● If any malfunctions are found or the climate controlled seat does not oper- ate, turn the sw[...]

CAUTION ● The outlet and plug may be hot during or immediately after use. ● The power outlets are not designed for use with a cigarette lighter. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. ● Use power outlets with the engine run- ning to avo[...]

SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The h[...]

T o open the front cup holders, push the cup holder lid. T o close, lower the cup holder lid and push down until it clicks in place. The rear cup holders are located in the fold-down armrest in the rear seat back. T o open the cup holders on the rear fold-down armrest, lift the cup holder lid. T o close, lower the lid. Soft bottle holder CAUTION ?[...]

GLOVE BOX Open the glove box by pulling the handle. Use the mechanical key when locking 䊊 1 or unlocking 䊊 2 the glove box. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX Upper half Pull up on the driver’s side latch to open the upper half of the console box. The upper half [...]

GROCERY HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than 20 lbs (9 kg) to a single grocery hook. CARGO NET (if so equipped) WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden st[...]

P OWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and becom[...]

Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window . T o open the window , push the switch to the first detent and continue to hold it down until the desired position is reached 䊊 1 . T o close the window, pull the switch to the first detent and continue to hold up until th[...]

Automatic operation T o fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way . T o stop the window, lift the switch up while the window is opening. T o fully close a window equipped with [...]

AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for about 45 sec- onds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to t[...]

When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up. If the auto-reverse function malfunctions and re- peats opening o[...]

Sliding the moonroof T o slide the moonroof: ● T o fully open the moonroof, push the switch 䊊 1 toward the open position until it reaches the second detent. If the switch 䊊 1 is pushed to the first detent, only the sunshade will open. ● T o fully close the moonroof, push the switch 䊊 2 toward the close position until it reaches the second[...]

CAUTION ● Remove water drops, snow, ice or sand from the moonroof before opening. ● Do not place heavy objects on the moonroof or surrounding area. Sunshade T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position until it reaches the first detent. ● T o fully open the sunshade and the moon- roof [...]

The rear sun shade operates when the ignition switch is in the ACC or ON position. The rear sun shade switch is located on the front console. ● T o raise the sun shade, push the upper side of the switch 䊊 1 . ● T o lower the sun shade, push the lower side of the switch 䊊 2 . ● The switch need not be held down. CAUTION ● Do not place obj[...]

Lights remain on for a maximum of 30 seconds. – Driver’s door is opened. Lights remain on for a maximum of 30 seconds after driver’s door is closed. – Ignition switch is placed in the OFF posi- tion. Lights remain on for a maximum of 30 seconds. The lights will go off when the ignition switch is in the ON position, or the driver’s door is[...]

T o turn on the personal lights, press and release the switch 䊊 1 . T o turn the personal lights off, press and release the switch 䊊 1 . T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. [...]

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after about 15 minutes if the trunk lid is left open, unless the ignition switch is in the ON position. For bulb replacement procedures, refer to “Exte- rior and interior lights” in the “Maintenance and do-it-yourself”[...]

WARNING ● Do not use the HomeLink 姞 Universal T ransceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982) . A ga- rage door opener which cannot detect an object in the path of a closing gara[...]

grammed device, press and hold the pro- grammed HomeLink 姞 button — releasing when the device begins to activate. 5. If the indicator light on the HomeLink 姞 blinks rapidly for 2 seconds and then turns solid, HomeLink 姞 has picked up a “rolling code” garage door opener signal. Y ou will need to proceed with the next steps to train the H[...]

● position the hand-held transmitte r1-3 inches (26 - 76 mm) away from the HomeLink 姞 surface. Hold the transmitter in that position for up to 15 seconds. If HomeLink 姞 is not programmed within that time, try holding the transmitter in another position – keeping the indicator light in view at all times. If you continue to have programming d[...]

MEMO 2-56 Instruments and controls[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey™ ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ............................................3 - 4 Locking with key ................................3 - 4 Locking with inside lock knob .[...]

1. T wo Intelligent Keys 2. Mechanical keys with built-in transpon- der chip (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT K EY™ Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey system components and NISSAN V e- hicle Immobilizer System components. Never l[...]

Mechanical key The Intelligent K ey contains the mechanical key, which can be used in case of a discharged bat- tery . T o remove the mechanical key, release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position. The mechanical k[...]

Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key , which contains an electrical transponder, to come into contact with salt water. This could affect system function. When the doors are locked using one of the following methods, the doors can no[...]

Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● T o close the windows, turn the driver’s door key to[...]

Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent K ey in the port and any door open, all doors will lock and unlock automatically . With the Intelligent Key left in the vehicle (not in the Intelligent K ey port) and any door open, all doors will unlock aut[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pushed. The FA A advises the radio waves may affect aircraft navigation and commu[...]

CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against anoth[...]

OPERATING RANGE The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 . When the Intelligent K ey battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent [...]

● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLI[...]

NO TE: ● Doors lock with the door handle request switch when the ignition switch is placed in the ON position. ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position. ● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical [...]

Unlocking doors 1. Carry the Intelligent K ey. 2. Push the door handle request switch 䊊 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 60 seconds to unlock all doors. If a door handle is pulled while unlocking the doors, that door may not be unlocked. Retur[...]

Opening the trunk lid 1. Push the trunk opener request switch 䊊 A for more than 1 second while carrying the Intel- ligent K ey with you. 2. The trunk will unlatch. A chime will sound 4 times. 3. Raise the trunk lid to open the trunk. Lockout protection T o prevent the Intelligent Key from being acci- dentally locked in the trunk, lockout protecti[...]

CAUTION After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles. Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors. All doors will be locked automatically u[...]

Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. See “Cancel switch” in this section. Using the panic alarm If you are near your vehicle and feel threatened[...]

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey. T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated. T o activate: Press and hold the and buttons for at least 2[...]

Symptom Possible Cause Remedy When pushing the ignition switch to stop the engine The SHIFT P warning appears on the dis- play and the inside warning chime sounds continuously. The shift selector is not in the P (Park) position. Shift the shift selector to the P (Park) position. When opening the driver’s door to get out of the vehicle The inside [...]

䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place. WARNING ● Make sure the hood is compl[...]

OPENER OPERATION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex - haust gas” in the “Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they[...]

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. The interior trunk lid r[...]

OPENING THE FUEL-FILLER DOOR The fuel-filler door automatically unlocks when all doors are unlocked. 1. Unlock the fuel-filler door using one of the following operations. ● Unlock all doors with the keyfob. ● Unlock all doors with the key . ● Push the power door lock switch to the unlock position. 2. T o open the fuel filler door, push the ri[...]

CAUTION ● The LOOSE FUEL CAP warning will ap- pear if the fuel-filler cap is not properly tightened. Failure to tighten the fuel- filler cap properly after the LOOSE FUEL CAP warning appears may cause the Malfunction Indicator Light (MIL) to illuminate. ● Failure to tighten the fuel-filler cap properly may cause the Mal- function Indicator Ligh[...]

Loose Fuel Cap warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. T o turn off the warning, do the following: 1. Remove and install the fuel-filler cap as soon as possible. See “Fuel-filler cap” . 2. Tighten the fuel-filler cap u[...]

WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. AUTOMATIC OPERATION (if so equipped) Tilt operation Push the switch 䊊 1 up or down to adjust the steering wheel to the desired position. T elescopic operation Push the switch 䊊 1 forward or backward to ad- just the steering whe[...]

䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do n[...]

AUTOMATIC ANTI-GLARE REARVIEW MIRROR The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is placed in the ON position. NO TE: Do not hang any objects over the [...]

T ype B and T ype C The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the O button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn off. T o turn on the automatic anti-glare feature a[...]

OUTSIDE MIRRORS The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . WARNING ● Objects viewed in the outside mirror on the passenger side are closer than th[...]

NO TE: If the outside mirror control switch is in the neutral position, neither mirror will turn downward when the shift selector is moved to R (Reverse) . Move the shift selector to R (Reverse) . Both mirrors will turn downward. The mirror surfaces will return to their original position when any of the following have occurred: ● The shift select[...]

MEMORY STORAGE FUNCTION T wo positions for the driver’s seat, steering col- umn, and outside mirrors can be stored in the automatic drive positioner memory . Follow these procedures to use the memory system. 1. Set the Continuously V ariable T ransmission (CVT) shift selector to the P (Park) position. 2. Place the ignition in the ON position. 3. [...]

1. Connect the battery cable or replace the fuse. 2. Open and close the driver’s door more than 2 times with the ignition switch in the L OCK position. Once the memory storage function has been restarted, you can store a memory position. See “Memory storage function” in this sec- tion. Selecting the memorized position Set the shift selector t[...]

MEMO 3-32 Pre-driving checks and adjustments[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the NISSAN controller ...............4 - 5 How to select menus on the screen ..............4 - 6 How to use the ST A TUS button ..................4 - 6 How to use the INF[...]

FM/AM radio with compact disc (CD) changer (if so equipped) ....................... 4-63 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ......................... 4-68 FM/AM/SA T radio with CD/DVD player (if so equipped) ............................... 4-75 Digital V ersatile Disc (DVD) Player Operation (models with Navigation Syste[...]

Bluetooth settings ............................ 4-140 Call volume .................................. 4-141 NISSAN V oice Recognition System (if so equipped) ................................. 4-142 NISSAN V oice Recognition Standard Mode ..... 4-142 Using the system ............................. 4-145 Before starting ............................... [...]

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a[...]

CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water. ● T o clean the display, never use a rough cloth, alcohol,[...]

If you press the BACK button 䊊 4 during setup, the setup will be canceled and/or the display will return to the previous screen. ● Finish setup. In some screens pressing the BACK button 䊊 4 accepts the changes made during setup. HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a[...]

HOW TO USE THE INFO BUTTON Press the INFO button. The display screen shows vehicle information for your convenience. The information shown on the screen should be a guide to determine the condition of the vehicle. See the following for details. Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to[...]

Fuel economy record Press the INFO button, then select the “Fuel Economy” key , then select the “View” key using the NISSAN controller. The average fuel consumption history will be displayed in a graph form along with the average fuel for the previous reset-to-reset period. Maintenance items Press the INFO button and select the “Mainte- n[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

Display settings Select the “Display” key . The Display settings screen will appear. Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the map background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new s[...]

T o turn the screen on: ● Press the SETTING button, select the “Dis- play” key and then select the “Display ON” key . Then set the screen to on by pressing the ENTER button, or ● Hold the OFF button for approxi- mately 2 seconds and the message “resum- ing display” will appear and the “Display ON” key will be automatically turne[...]

Clock The following display will appear after pressing the SETTING button, then selecting the “Clock” key using the NISSAN controller. On-screen Clock: When this item is enabled (indicator light illumi- nated) , a clock is always displayed in the upper right corner of the screen. Clock Format : Choose either the 12h (12-hour) clock display or t[...]

● Newfoundland ● Aleutian ● Hawaii ● Alaska Adjust Clock: T o adjust the time, select the + or - key for the hour until the desired number is reached. Repeat the process for the minutes on the line below . T o accept the changes made and return to the Clocks Settings screen, select the OK key . Comfort & Convenience settings Select the [...]

Auto Interior Illumination: Select to turn on or turn off the illumination of the interior lights when any door is unlocked. Auto Headlights Sensitivity: Select to adjust the sensitivity of the automatic headlights higher (right) or lower (left) . Auto Headlights Off Delay: Select to change the duration of the automatic headlight off timer from 0-,[...]

Language / Units Use the NISSAN controller to select the “Lan- guage / Units” key. Select which setting you want to change using the NISSAN controller. Select Language: Select the “English” key, the “Français” key or the “Español” key to change the language shown on the display . Select Units: Select the “US” (mi, °F , MPG) k[...]

If no operation is done within 10 seconds, the display will return to the previous display . Press and hold the OFF button for more than 2 seconds to turn the display off. Press the button again to turn the display on. 1. Z OOM OUT button* 2. ST A TUS button (P . 4-20) 3. DEST button* 4. ROUTE button* 5. NISSAN controller (P . 4-17) 6. INFO button [...]

9. OFF brightness control button (P . 4-31) 10. - (brightness control) button 11. VOICE button* 12. SETTING button (P . 4-24) 13. MAP button* 14. BACK (previous) button (P . 4-17) 15. Z OOM IN button* *For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. **For information on the PHONE button, see “Bluet[...]

If you press the BACK button 䊊 4 during setup, the setup will be canceled and/or the display will return to the previous screen. ● Finish setup. In some screens, pressing the BACK button 䊊 4 accepts the changes made during setup. For the VOICE button 䊊 5 functions, refer to the separate Navigation System Owner’s Manual. HOW TO USE THE TOU[...]

Adjusting the item: T ouch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item. T ouch the up arrow 䊊 3 to scroll up the page one item at a time, or touch the double up arrow 䊊 4 to scroll up an entire page. T ouch the down arrow 䊊 5 to scroll down the page one item at a time, or touch the double down arrow ?[...]

HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen (for example, press[...]

Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to display Distance to Empty , Average Fuel Economy and Fuel Economy History . Distance to empty (MI or km) The Distance to Empty (D TE) mode provides you with an estimation of the distance that can be driven before refueling. The D TE is constant[...]

Maintenance items Press the INFO button and select the “Mainte- nance” key using the NISSAN controller; the maintenance information will be displayed on the screen. Changing the maintenance interval Select one of the maintenance reminder keys using the NISSAN controller to display the screen to change the maintenance interval. Y ou can choose b[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

HOW TO USE THE SETTING BUTTON When the SETTING button is pressed, the Set- tings screen will appear on the display . Y ou can select and/or adjust several functions, features and modes that are available for your vehicle. Use the NISSAN controller to select each item to be set. Display settings Select the “Display” key . On the screen above, se[...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK[...]

Color theme: Select the “Display” key, then select the “Color Theme” key . The Color Theme select screen will appear. Select the key for the desired color. The appear- ance of the background, arrows and bars will change for all screens accordingly . Y ou can choose a black, blue or red color theme. Clock The following display will appear af[...]

Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the current location, by selecting the correct time zone key to enable that time zone (indicator light will illuminate for that location) . ● Pacific ● Mountain ● Central ● Eastern ● Atlantic ● Newfoundland ● Ha[...]

Comfort settings Select the “Others” key using the NISSAN con- troller, then select the “Comfort” key. The Com- fort settings screen will be displayed. Y ou can set the following operating conditions by selecting the desired item using the NISSAN controller. The indicator light (box at the right of the selected item) alternately turns on an[...]

getting into the vehicle and placing the ignition switch in the ACC position, the driver’s seat moves to the previous position. Return All Settings to Default : Select to change all the comfort and convenience systems to their default settings. Language & Units: Use the NISSAN controller to select the “Lan- guage & Units” key . Select[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Camera settings Select the “Camera” key. The Camera settings screen will appear. When t[...]

Phone volume For phone volume settings refer to “Bluetooth 姞 Hands-Free Phone System with Navigation Sys- tem” in this section. Switch beeps With this option on (indicator light illuminated) , a beep will sound if any control panel button is pressed. OFF BUTTON T o change the display brightness, press the OFF button. Pressing the button again[...]

USING THE IMAGE VIEWER When a compatible portable storage device is plugged into the USB jack located in the center console, compatible image files stored on the device can be viewed on the control panel de- vice. Connecting the portable storage device T o connect a portable storage device to the sys- tem so that images stored on it can be viewed, [...]

Viewing images in a slideshow T o view all of the images on the device in a slideshow , first enter the full screen mode while viewing one of the images. The slideshow control buttons are located on the right side of the screen. Select the play key to begin the slideshow . The images shown on the screen will periodically change at a given interval [...]

Slideshow order: T o change the order in which images are dis- played during a slideshow , select one of the options. If the “Random” key is selected, images will be displayed in a random order during a slideshow . If the “Order List” key is selected, images will be displayed in the order in which they are stored on the storage device. T o [...]

HOW TO READ THE DISPLAYED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line 䊊 A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body . ● Red line 䊊 1 : approx. 1.5 ft (0.5 m) ● Y ellow line 䊊 2 : approx. 3 ft (1 m) ● Green line ?[...]

● When backing up the vehicle up a hill, objects viewed in the monitor are fur- ther than they appear. When backing up the vehicle down a hill, objects viewed in the monitor are closer than they ap- pear. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. The vehicle width and predicted course lines a[...]

4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines. 5. When the vehicle is parked in the space completely , move the shift selector to the P (Park) position and apply the parking brake. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DISTANCES The di[...]

Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is clos[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display . However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW TO ADJUST THE SCREE[...]

● If dirt, rain or snow attaches to the camera, the RearView Monitor may not clearly display objects. Clean the camera. ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discolora- tion. T o clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wipe with a dry cloth. ● Do not damage[...]

1. T emperature control buttons (driver’s side) 2. AUT O climate control ON button 3. (front defroster) button 4. Air recirculation button 5. MODE (manual air flow control) button 6. T emperature control buttons (passen- ger’s side) 7. DUAL (passenger side temperature control) ON/OFF button 8. Fresh air intake button 9. (fan speed control) dial[...]

● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause seve[...]

● When the front defroster button is pressed, the air conditioner will automati- cally be turned on at outside temperatures above 36°F (2°C) . The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compart- ment to further improve the defogging per- formance. MANUAL OPERATION Fan speed control T ur[...]

The sunload sensor, located on the top driver’s side of the instrument panel, helps the system maintain a constant temperature. Do not put any- thing on or around this sensor. 1. Air recirculation button 2. A/C (air conditioner) ON/OFF button 3. MODE (manual air flow control) button 4. Fresh air intake button 5. T emperature control buttons (pass[...]

WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot[...]

● When the front defroster button is pressed, the air conditioner will automati- cally be turned on at outside temperatures above 36°F (2°C) . The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compart- ment to further improve the defogging per- formance. MANUAL OPERATION Fan speed control T ur[...]

The sunload sensor, located on the top driver’s side of the instrument panel, helps the system maintain a constant temperature. Do not put any- thing on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone [...]

Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interference or a buzzing noise to com[...]

AUDIO OPERATION PRECAUTIONS Compact disc (CD) player (models without Navigation System) CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player at a time[...]

● This audio system can only play pre- recorded CDs. It has no capability to record or burn CDs. ● If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratch[...]

Disc Read Error: ● Confirm that the CD/DVD is inserted correctly (the label side is facing up, etc .) . ● Confirm that the CD/DVD is not bent or warped and it is free of scratches. Please Eject Disc: This error may be due to the tempera- ture inside the player getting too high. Remove the CD/DVD by pushing the EJECT button, and after a short ti[...]

● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc ., as long as the permit from Macrovision Corporation is not issued. ● Modifying or disassembling is prohib- ited. ● Dolby digital is manufactured under li- cense from Dolby Laboratories, Inc . ● Dolby and t[...]

● If you are using an iP od 姞 (3rd Generation with Dock connector) , do not use very long names for the song title, album name or artist name to avoid the iP od 姞 resetting itself. iP od 姞 is a trademark of Apple Inc., registered in the U.S. and other countries. Bluetooth 姞 streaming audio (if so equipped) ● Some Bluetooth 姞 audio dev[...]

● Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second. ● Multisession — Multisession is one of the methods for writing data to media. W riting data once to the media is called a single session, and writing more than once is called a multisessio[...]

Specification chart : Supported media CD, CD-R, CD-RW , USB 2.0 Supported file systems CD, CD-R, CD-RW , ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista 姞 operating system-based computer) are not supported. UDF Bridge (UDF 1.0[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista ?[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th[...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX 姞 codec owned by Div , Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – A VI stands for Audio Video Interleave. It is standard file format originated by Mi- crosoft Corporation. A .divx encoded file can be sa[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using t[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station and CD select (1 - 6) buttons 4. L OAD CD button 5. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade, Balance, SSV (if so equipped) , and Beep) 6. AUX IN jack 7. AUX button 8. TRACK button 9. SEEK/CA T button 10. DISC button 11. RPT/RDM button 12. SCAN button 13. AM·FM button 14. DIS[...]

AUDIO control knob (Bass, T reble, Fade, Balance and Beep) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Fade → Balance → Beep ON/OFF → Bass T o adjust Bass, T reble, Fade and Balance, press the AUDIO control knob until the desired mode appears on the display . T urn the TUNE/FOLDER knob to adjust Bass and[...]

● Artist name displays the name of the artist of the song playing. ● Album title displays the title of the album of the song playing. FM/AM radio operation FM/AM band select : Pressing the AM·FM button will change the band as follows: AM → FM1 → FM2 → AM When the AM·FM button is pressed while the ignition switch is in the ACC or ON posi[...]

LOAD button: T o insert a CD in the CD changer, press the L OAD button for less than 1.5 seconds. Select the loading slot by pressing the CD insert select button (1 – 6) , then insert the CD. T o insert 6 CDs to the CD changer, press the L OAD button for more than 1.5 seconds. The slot numbers (1 – 6) will illuminate on the display when CDs are[...]

SCAN button: While listening to a CD, press the SCAN button to preview the first 10 seconds of each track on the CD playing. Pressing the SCAN button again during this 10 second period stops the scan and the CD remains on that track. CD EJECT: Current/Selected disc: ● Press the button, then press the slot number (1 – 6) for the desired disc. Th[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. AUX button* 6. TRACK button 7. SEEK/CA T button 8. DISC button 9. RPT/RDM button 10. SCAN button 11. FM·AM button *No satellite radio reception is available when the AUX button is pressed to ac[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Bal- ance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until t[...]

CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the following text might be able to be displayed by selecting the “T ext” key: ● Folder displays the name of the current folder being accessed. ?[...]

When the AUX button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed ON. *When the AUX button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and ant[...]

If the radio is already operating, it will automati- cally turn off and the compact disc will play . If the system has been turned off while the com- pact disc was playing, pressing the VOL/ON·OFF control knob will start the compact disc. DISC button: When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will [...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

Additional features For more information about the iP od 姞 player available with this system, see “iP od 姞 player op- eration without Navigation System” in this sec- tion. For more information about the USB interface available with this system, see “USB interface (models without Navigation System)” in this sec- tion. For more informatio[...]

*No satellite radio reception is available when the SA T button is pressed to ac- cess satellite radio stations unless op- tional satellite receiver and antenna are installed and an XM 姞 satellite radio ser- vice subscription is active. Satellite ra- dio is not available in Alaska, Hawaii and Guam. FM/AM/SA T RADIO WITH CD/DVD PLAYER (if so equip[...]

For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section. Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key. When the feature[...]

● Song displays the ID3 encoded tag of the song name. ● Album displays the ID3 encoded tag of the album name. ● Artist displays the ID3 encoded tag of the artist’s name. Some of this text might not display while playing a regular CD. FM/AM/SA T radio operation FM/AM band select : Pressing the FM·AM button will change the band as follows: A[...]

1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button, or choose the satellite band XM1, XM2 or XM3 using the SA T button. 2. T une to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly m[...]

Compact disc (CD) player operation Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing. If the radio is already operating, it will automati- cally turn off and the compact disc will play . If the system has[...]

● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: 1 T rack Repeat - the current track is repeated. 1 Disc Random- tracks from the entire disc are played randomly . 1 Folder Repeat (compressed audio files CD only) - the current folder[...]

● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. ● Title T ext Priority ● Record to Music Box, Automatic Recording, Recording Quality For more information about these options, see “Music Box™ Hard-Drive Audio System with Navigation System” in this section. CD EJECT button: W[...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

For more information about the Music Box 姞 fea- ture available with this system, see “Music Box 姞 with Navigation System” in this section. For more information about the Bluetooth 姞 streaming audio feature available with this sys- tem, see “Bluetooth 姞 streaming audio” in this section. DIGITAL V ERSATILE DISC (DVD) PLAYER OPERATION [...]

Playing a DVD DISC-AUX button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Press the DISC-AUX button until the DVD mode is active on the display . When a DVD is loaded, it will be replayed auto- matically . The operation screen will be turned on when the DISC-AUX button is pres[...]

DVD settings Select the “Settings” key to adjust the following settings: ● Key (DVD-VIDEO) Displays the operation keys for the specific DVD menu. – Select the directional keys to move the cursor on the DVD menu. – Select the “Enter” key to fix the selected menu item. – Select the “Move” key to move the loca- tion of the operatio[...]

● Audio Choose the preferred language for the au- dio. ● Subtitle (DVD-VIDEO, DVD-VR) Choose the preferred language for the sub- titles. ● Display Mode (DVD-VIDEO, VIDEO CD, DVD-VR) Choose from the “Full” , “Wide” , “Normal” or “Cinema” mode. ● Title List (DVD-VR) Choose the preferred title from the list. ● Play Mode Choos[...]

SEEK/CA T and TRACK buttons: Press the SEEK/CA T button while an au- dio file on the USB device is playing to return to the beginning of the current track. Press the SEEK/CA T button several times to skip backward several tracks. Press the TRACK button while an audio file on the USB device is playing to advance one track. Press the TRACK button sev[...]

When there are both audio and movie files in the USB memory , the mode select screen is dis- played. Use the touchscreen or the NISSAN con- troller to select the preferred type of file. When there is only type of file in the USB memory , that audio or movie operation screen is displayed and starts to play . When you play a file with limited playing[...]

Menu: There are some options available during play- back. Select one of the following that are dis- played on the screen, if necessary . Refer to the following information for each item. ● Movie Playback Switch to the movie playback mode. This item is displayed only when the USB memory contains movie files. The shift selector must be in Park (P) [...]

Operation keys: T o operate the USB memory, select the desired key displayed on the display screen. ● Pause: Select the key to pause the movie file. T o resume playing the movie file, use the key . ● Play: Select the key to start playing the movie file or resume the movie file if it has been paused. ● Stop: Select the key to stop playing the [...]

● 10 Key Search Select the “10 K ey Search” key to open the number entry screen. Input the number you want to search for and the specified file or folder will be played. ● Display Adjust the image quality of the screen. ● DRC DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound [...]

Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iP od 姞 mode. If the system has been turned off while the iP od 姞 was playing, pressing the VOL/ON·OFF control knob will start the iP od 姞 . AUX button: When the AUX button is pressed with the system off and the iP od ?[...]

● Albums ● Artists ● Genres ● Composers ● Audiobooks The following keys shown on the screen are also available: ● MENU: returns to the previous screen. ● : plays/pauses the music selected. SEEK/CA T and TRACK buttons: When the SEEK/CA T button or TRACK button is pressed for less than 1.5 sec- onds while the iP od 姞 is playing, the n[...]

Audio main operation Place the ignition switch in the ACC or ON position. Press the DISC·AUX button repeatedly to switch to the iP od 姞 mode. If the system has been turned off while the iP od 姞 was playing, pressing the VOL/ON·OFF control knob will start the iP od 姞 . DISC·AUX button: When the DISC·AUX button is pressed with the system of[...]

● Albums ● Songs ● P odcasts ● Genres ● Composers ● Audiobooks ● Shuffle Songs The following keys shown on the screen are also available: ● MENU: returns to the previous screen. ● : plays/pauses the music selected. Play mode: While the iP od 姞 is playing, touch the “Menu” key to display the iP od 姞 menu. T ouch the “Play[...]

Scrolling menus: While navigating long lists of artists, albums or songs in the music menu, it is possible to scroll the list by the first letter. T o activate letter index- ing, perform one of the following: ● T urn the NISSAN controller quickly. ● Press and hold the up/down directional ar- rows on the NISSAN controller. ● T ouch and hold th[...]

Recording CDs 1. Operate the audio system to play a CD. For information on playing CDs, see “Com- pact Disc (CD) player operation” in this sec- tion. 2. Select the “REC” key with the NISSAN con- troller. “REC T rack” appears on the screen. NO TE: ● The system starts playing and recording the 1st track on the CD when the “REC” key [...]

Playing recorded songs Select the Music Box audio system by using one of the following methods: ● Press the SOURCE select switch on the steering wheel. For information, see “Steering wheel switch for audio control” in this section. ● Press the DISC button repeatedly until the center display changes to the Music Box mode. Stopping playback: [...]

Music Box menu There are some options available during play- back. Select the “Menu” key , then select one of the following that are displayed on the screen, if necessary . Refer to the following information for each item: ● Music Library There are some options available during playback. Select one of the following op- tions that are displaye[...]

Music Box settings T o set up the Music Box system to your preferred settings, select the “Menu” key with the NISSAN controller during playback. Then select the “Mu- sic Box Settings” key with the NISSAN controller. ● Music Box Used/Free Space: Information about “Saved Album” , “Saved T rack” and “Remaining Time” is displayed.[...]

rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. Y ou agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote MusicID Service uses a unique identifier to track queries for statistical purposes. The purpose of a [...]

Recording CDs 1. Operate the audio system to play a CD. For information on playing CDs, see “Com- pact Disc (CD) player operation” in this sec- tion. 2. T ouch the “Start REC” key. REC CD ap- pears on the screen. NO TE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” key is selected. ● Individu[...]

Automatic recording: If the “ Automatic Recording” function is turned to ON, recording starts when a CD is inserted. For more information, see “Music Box settings” in this section. Stopping recording: T o stop the recording, touch the “Stop REC” key on the screen. If the CD is ejected, the audio system is turned off or the ignition swit[...]

The NISSAN controller can also be used to se- lect tracks. For more information on how to use the NISSAN controller, see “How to use the NISSAN control- ler” in this section. TUNE/FOLDER knob: The TUNE/FOLDER knob skips from album to album unless it is playing “ All Songs” from the Music Library menu. When playing “ All Songs”, the TUNE[...]

● My Playlists Displays the playlists stored in the system. T ouch the “Edit” key next to a playlist to perform the following operations for that playlist: – Add Current Song - adds the song cur- rently playing to the playlist. – Add Songs by Album - adds songs to the playlist by album. – Add Songs by Artist - adds songs to the playlist[...]

● Play Mode Alters the play mode of the playlist. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: – Normal - no play pattern is applied. – 1 Album Repeat - the songs in the current album are repeated. – 1 T rack Repeat - the current track is re- peated. – 1 Album Random - the songs in the cur- [...]

Music Box settings T o set up the Music Box system to your preferred settings, touch the “Menu” key during playback, then touch the “Music Box Settings” key . ● Music Box Used/Free Space: Displays the number of tracks and albums stored on the hard drive. The percentage of hard drive space taken up and the amount of remaining recording tim[...]

Gracenote 姞 NO TE: ● The information contained in the Gracenote 姞 Database is not fully guaran- teed. ● The service of the Gracenote 姞 Database on the Internet may be stopped without prior notice for maintenance. End-User License Agreement USE OF THIS PRODUCT IMPLIES ACCEP- T ANCE OF THE TERMS BELOW. Gracenote 姞 MusicID™ T erms of Use[...]

Copyright : Music recognition technology and related data are provided by Gracenote 姞 . Gracenote is the industry standard in music recognition technol- ogy and related content delivery . For more infor- mation visit www .gracenote.com. CD and music-related data from Gracenote, Inc., copyright © 2000-2007 Gracenote. Gracenote Software, copyright[...]

5. Enter a PIN of your choice. It will be needed by your Bluetooth 姞 audio device to com- plete the connection process. See the Bluetooth 姞 audio device’s owner’s manual for more information. Audio main operation T o switch to the Bluetooth 姞 audio mode, press the DISC-AUX button repeatedly until the Bluetooth 姞 audio mode is displayed [...]

4. Select the “ Audio Player” key . 5. A list of the connected Bluetooth 姞 audio players is displayed. Select the name of the device you wish to edit. 6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth 姞 audio player. Select the “Edit” key to edit the d[...]

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a [...]

1. P ower on and SOURCE select switch 2. Menu control switch/ENTER button 3. V olume control switch STEERING WHEEL SWITCH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. POWER on switch With the ignition switch in the ACC or ON posi- tion, push the SOURCE switch to turn the audio system on. SOURCE select[...]

CD: ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. ● Tilt up/down for more than 1.5 seconds to increase or decrease the folder number (if playing compressed audio files) . ● Press the ENTER button to show the CD Menu. DVD (if so equipped) : ● Tilt up/down for less than 1.5 seconds to increase or decrease [...]

When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some juris- dictions[...]

Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have a com- patible Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth 姞 wireless technology , you can make or receive a hands-free telephone call with your cellular [...]

garage, near a tall building or in a moun- tainous area. – Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call. ● Do not place the cellular phone in an area surrounded by metal or far aw[...]

Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly . ● W ait un[...]

– NO T “One eight hundred six six two sixty two hundred,” and – NO T “One eight oh oh six six two sixty two hundred” ● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to ente[...]

Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition sys- tem is active, press and hold the button for 5 seconds to quit the voice recognition system at any time. TUNING SWIT CH Wh[...]

3. Say: “ Add phone” 䊊 B . The system acknowl- edges the command and asks you to initiate connecting from the phone handset 䊊 C . The connecting procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Own- er’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instruc- t[...]

LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before speaking. After the m[...]

If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail- able commands.[...]

“T ransfer Entry” 䊊 A Use the T ransfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary .” If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name al[...]

difficulty recognizing. For more information see “Record name” in this section. NO TE: Each phone has its own separate phone- book. Y ou cannot access Phone A’s phone- book if you are currently connected with Phone B . “List Names” 䊊 A Use the List Names command to hear all the names and locations in the phone book. The system recites t[...]

Use the Recent Calls command to access out- going, incoming or missed calls. “Outgoing” 䊊 A Use the Outgoing command to list the outgoing calls made from the vehicle. “Incoming” 䊊 B Use the Incoming command to list the incoming calls made to the vehicle. “Missed” 䊊 C Use the Missed command to list the calls made to the vehicle tha[...]

5. Press the button. For information on selecting a different lan- guage, see “Choosing a language” in this section. 6. V oice memory A or memory B is selected automatically . If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system. 7. When preparation is complet[...]

● go back ● call five six two eight zero ● dial six six four three seven MANUAL CONTROL While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. The manual control mode does not allow dialing a phone number by digits. The user may select an entry f[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone c[...]

REGULATORY INFORMATION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device may n[...]

2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth 姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies accor[...]

V EHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally dow[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. V oicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry, select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the PHONE button on the instrument panel or the switch on the steering wheel. The “Phone” screen will appear on the display . 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handse[...]

Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display . b. Press the PHONE button on the instrument panel. c. Press and hold the phone button on the steering wheel switc[...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display . ● Push the switch on the steering wheel. ● When the “Call in Progress” screen is dis- played, press the PHONE button on the instrument panel to hang up. If any other screen is currently display[...]

Download Handset Phonebook: See “Handset Phonebook” in this section for adding, editing and deleting contacts in the handset phonebook. V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automa[...]

Edit Bluetooth Info: Check information about the device name, device address and device PIN. Replace Connected Phone: Replace the phone currently connected to the system. This option allows you to keep any voic- etags that were recorded using the previous phone. CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if recep[...]

NISSAN V oice Recognition allows hands-free operation of the systems equipped on this ve- hicle, such as phone and vehicle information. There are two voice recognition modes of opera- tion available. They are: ● Standard Mode ● Alternate Command Mode In Standard Mode (the factory default setting) , commands that are available are always shown o[...]

1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . NO TE: Y ou can skip steps 1 to 3 by pressing the switch and saying “Help” . 4. Select the “User Guide” key . 5. Select an item. Available items: ● Getting Started Describes the basics of how to operate the V oic[...]

T utorials on the operation of the Voice Rec- ognition system If you choose “Finding a Street Address” , “Using the Address Book” or “Placing Calls”, you can view tutorials on how to perform these operations using V oice Recognition. Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and [...]

Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands cor- rectly . 1. Select “Help on Speaking” . 2. Y ou can confirm the page by scrolling the screen using the NISSAN controller or touching the page down key . V oice recognition settings The available settings of the NISSAN V [...]

GIVING VOICE COMMANDS 1. Press the switch located on the steer- ing wheel. 2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu p[...]

● If you want to adjust the volume of the sys- tem feedback, push the volume control switch on the steering wheel or use the audio system volume knob while the system is making an announcement. How to speak numbers V oice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule:[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays V ehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Cha[...]

V ehicle Information Command: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio sy[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number” . 5. Say “800” . 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662” . LHA1334 LHA1335 LHA1336 Monitor, climate, audio, phone and voice recognition systems 4-151[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200” . 10. The system announces, “Dial or Change Number?” 11. Say “Dial” . 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone” . 4. Say “International Call” . WHA1332 LHA1333 LHA1334 Monitor, climate, audio, ph[...]

5. Say “011811112223333” . 6. Say “Dial”. 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN V OICE RECOGNITION ALTERNATE COMMAND MODE The Alternate Command Mode enable[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display . 3. Select the “V oice Recognition” key . 4. Select the “ Alternate Command Mode” key . 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode[...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help” , you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key using the NISSAN controller. 3. Select the “V oice Recognition” key usi[...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a smaller number. Zoom Out <1 to 13> Changes the map scale to a larger number. Guidance V oice ON/OFF T urns the navigation voice guidance on or off. Guide V oice Repeat Repeats the[...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . 4. Select the “User Guide” key . 5. S[...]

Before starting T o get the best performance from NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing the voice commands cor- rectly . ● When the c[...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

NO TE: The user guide can also be accessed from within the INFO menu after pressing the INFO button. Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This s[...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The V oice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also disp[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover ....................5 - 5 Off-road recovery ...........................[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do [...]

Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h) . Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatica[...]

● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing ti[...]

avoid driving when tired. Never drive when under the influence of alcohol or drugs (including pre- scription or over-the-counter drugs which may cause drowsiness) . Always wear your seat belt as outlined in the “Safety – Seats, seat belts and supplemental restraint system” section of this manual, and also instruct your passengers to do so. Se[...]

3. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake pedal to gradually stop the vehicle. 6. T urn on the hazard warning flashers and either contact a roadside emergency service to change[...]

When the ignition switch is pushed without de- pressing the brake pedal, the ignition switch po- sition will illuminate as follows: Push the ignition switch center: ● once to change to ACC. ● two times to change to ON. ● three times to return to OFF . The ignition switch will automatically return to the L OCK position when any door is either [...]

The battery saver feature will be cancelled if any of the following occur: ● any door is opened. ● shift selector is moved out of the P (Park) . ● ignition switch changes position. ON (Normal operating position) : This position turns on the ignition system and electrical accessories. CAUTION Do not leave the vehicle with the ignition switch i[...]

NO TE: The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator, replace the battery as soon as possible. See “Battery replace- ment” in the “Maintenance and do-it- yourself” section. CAUTION ● Never place anything except the Intelli- gent Key in the Intelligent Key port. Do- ing so may ca[...]

1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral) . P (Park) is recommended. The starter is designed not to operate if the shift selector is in any of the driving positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the igni- tion switch to start the engine. T o start the engine[...]

WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neu- tral) to R (Reverse) , D (Drive) , Ds (Drive Sport) or (M) Manual shift mode. Al- ways depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident. ● Cold engine idle speed is high, so use caution[...]

NO TE: Engine power may be automatically re- duced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers. Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift selector out of the P (Park) position. 2. K eep the foot [...]

R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed to move the shift selector from P (Park) , N (N[...]

lected using the shift paddles (if so equipped) on the steering wheel 䊊 B and 䊊 C . In the manual shift mode, the shift range is displayed on the position indicator in the meter. When shifting the shift selector to the manual shift gate, the position indicator displays 1 (first) up to 6 (sixth) depend- ing on vehicle speed. Shift ranges up or d[...]

Shift lock release If the battery charge is low or discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed and the shift selector button pressed. It will be necessary to jump start or have your battery charged, see “Jump starting” in the “In case of emergency” section. Contact your NISS[...]

(MIL)” in the “Instrument and controls” sec- tion. This will occur even if all electrical circuits are functioning properly. In this case, place the ignition switch in the OFF position and wait for 10 seconds. Then push the switch back to the ON position. The vehicle should return to its normal op- erating condition. If it does not return to [...]

1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically . WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. ● In heavy traffic or i[...]

T o reset at a faster cruising speed, use one of the following three methods. ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. ● Push and hold the ACCEL/RES switch. When the vehicle attains the speed you de- sire, release the switch. ● Push and release the ACCEL/RES switch. Ea[...]

● When cruising at highway speeds, it is more economical to use the air conditioner and leave the windows closed to reduce drag. ● Use the recommended viscosity engine oil. See “Capacities and recommended fuel/lubricants” in the “T echnical and con- sumer information” section of this manual. WARNING ● Do not stop or park the vehicle o[...]

● HEADED DOWNHILL WITH CURB: 䊊 A T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. ● HEADED UPHILL WITH CURB: 䊊 B T urn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb. ● HEADED UPHILL OR DOWNHILL, NO CURB: 䊊 C T urn th[...]

WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. W et brakes When th[...]

WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or rev[...]

When the VDC system operates, the indi- cator in the instrument panel flashes so note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● Y ou may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and ind[...]

● When driving on extremely inclined sur- faces such as higher banked corners, the VDC system may not operate prop- erly and the indicator may flash or both the and indicator lights may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the indicator may flash or[...]

3. Tire chains may be used. For details, see “Tire chains” in the “Maintenance and do-it- yourself” section of this manual. SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. ● A sturdy[...]

T o use the engine block heater: 1. T urn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3 wire, 3 pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet. 5. The engine block heater must be p[...]

MEMO 5-28 Starting and driving[...]

6 In case of emergency Emergency engine shut off .........................6 - 2 Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 3 Jump starting .....................................6 - 7 Push starting .............................[...]

T o shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times, or – Push and hold the push-button ignition switch for more than 2 seconds. TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System [...]

● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CHANGING A FLAT TIRE If you have a flat tire, follow the instructions be- low: Stopping the vehicle 1[...]

Getting the spare tire and tools Open the trunk. Remove the floor carpeting and spare tire cover. Remove the jack 䊊 1 and wheel nut wrench 䊊 2 from the tool box on the right side of the trunk compartment. Remove the spare tire. LCE0199 WCE0189 WCE0188 6-4 In case of emergency[...]

Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided with your vehicle on other vehicles. The [...]

Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nu[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D , 䊊 E ) . Lower the vehicle completely. WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. Thi[...]

● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery. It could explode and cause se- rious injury. ● Y our vehicle [...]

● Make sure the jumper cables do not touch moving parts in the engine com- partment and that the cable clamps do not contact any other metal. 5. Start the engine of the booster vehicle and let it run for a few minutes. 6. K eep the engine speed of the booster ve- hicle at about 2,000 rpm and start the en- gine of the vehicle being jump started. C[...]

3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is coming from the en- gine, stand clear to prevent getti[...]

For information about towing your vehicle behind a recreational vehicle (RV) , refer to “Flat towing” in the “T echnical and consumer information” sec- tion of this manual. T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as ill[...]

CAUTION ● Never tow CVT models with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to the transmission. If it is nec- essary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels. ● When towing with the front wheels on t[...]

Rocking a stuck vehicle WARNING ● Stand clear of a stuck vehicle. ● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. If your vehicle is stuck in sand, snow , mud, etc., use the following procedure: 1. T urn off the V ehicle Dynamic Cont[...]

MEMO 6-14 In case of emergency[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBODY In areas where road salt is used in winter, it is necessary to clean the und[...]

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME PARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSIN[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Never [...]

SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual. WARNING Do not allow wet seat belts to roll up[...]

CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them. Chemicals used for road surface de-icing are extremely corr[...]

MEMO 7-8 Appearance and care[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ..........[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent [...]

1. P ower steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse block 6. Battery 7. Fuse/Fusible link box 8. Engine oil dipstick 9. Radiator cap 10. Drive belt location 11. Engine coolant reservoir 12. Windshield-washer fluid reservoir NO TE: Side covers removed for clarity. WDI0662 ENGINE COMPARTMENT CHE[...]

T o remove the engine compartment covers, un- hook the clips 䊊 A located as illustrated. T o remove the engine cover, pull the cover up- ward first 䊊 1 and then toward the front of the vehicle 䊊 2 . The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% w[...]

CAUTION ● When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to -34° F (-37° C) . If additional freeze protec- tion is needed due to weather where you operate your vehicle, add G[...]

the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. Refer to the NISSAN Service and Maintenance Guide for more details. If the cooling system frequently requires coolant, have it checked by a NISSAN dealer. CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be fou[...]

5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks 䊊 B . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark 䊊 A , remove the oil filler cap and pour recommended oil through the opening. Do not overfill 䊊 C . 6. Recheck oil level with the dipstick. I[...]

3. T urn the engine off and wait more than 10 minutes. 4. Place a large drain pan under the drain plug 䊊 A (under the body) . 5. Remove the oil filler cap 䊊 B (inside the en- gine compartment) by turning it counter- clockwise. 6. Remove the drain plug 䊊 A with a wrench by turning it counterclockwise and completely drain the oil. If the oil fi[...]

5. Wipe the engine oil filter sealing surface with a clean rag. CAUTION Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to engine damage. 6. Coat the gasket on the new filter with clean engine oil. 7. Screw on the oil filter until a slight resistance is felt, then tighten an addi[...]

CAUTION ● DO NO T OVERFILL . ● Recommended fluid is Genuine NISSAN PSF or equivalent. For further brake fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “T echnical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed con- tainer. Old, inferior or con[...]

WINDSHIELD-WASHER FLUID RESERVOIR Fill the windshield-washer fluid reservoir periodi- cally . Add windshield-washer fluid when the low windshield-washer fluid warning light comes on. T o fill the windshield-washer fluid reservoir, lift the cap off the reservoir and pour the windshield- washer fluid into the reservoir opening. Add a washer solvent t[...]

● Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce bat- tery life, and in some cases lead to an explosion. ● When working on or near a battery, al- ways wear suitable eye protection and remove all jewelry. ● Battery posts, terminals and rela[...]

V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting is necessary , see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN de[...]

1. P ower steering fluid pump 2. Generator 3. Air conditioner compressor 4. Crankshaft pulley WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is[...]

WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance. The air cleaner filter should not be cleaned and reused. Repl[...]

CLEANING If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing with clear water. Clean each blade [...]

Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B . If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with se[...]

T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compartment fuse box. T ype A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box. T ype A fuses can be installed in the engine com- partment and passenger compartment fuse boxes. I[...]

3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. 5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by [...]

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Pull the fuse box cover to remov[...]

4. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 5. Push the fuse box cover to install. 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT K EY™ T ype A WDI0452 T ype B LD[...]

Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey. 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one. Recommended battery: CR2032 o[...]

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, in- cluding interference that may cause undes- ired operation of the device. HEADLIGHTS Replacing the xenon headlight bulb (if so equipped) WARNING Ꮨ HIGH VOL TAGE When xenon headligh[...]

EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* Headlight assembly High (Halogen) 65 9005 (HB3) Low (Halogen) (if so equipped) 55 H11 Low (Xenon)** (if so equipped) 35 D2S Park/T urn 28/8 3457NAK Side marker 5 WY5W Front fog light (if so equipped) 55 H11 Front personal/map lights 8 — Glove box light 3.4 158 V anity mirror light 1.4 — S[...]

1. Headlight assembly 2. Map light 3. Rear personal lights 4. Fog light (if so equipped) 5. Step light 6. High-mounted stop light (T ype A) 7. T runk light 8. High-mounted stop light (T ype B) 9. License plate light 10. Rear combination light WDI0666 8-28 Maintenance and do-it-yourself[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. WDI0263 Map lights WDI0667 V anity mirror light WDI0340 Maintenance and do-it-y[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light LDI0341 Personal light WDI0670 T runk light WDI0343 8-30 Maintenance and do-it-yourself[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK [...]

WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V .S.S./C .M .V .S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire and Loading Information label (if so equipped) . Do not load your ve- hicle beyond this capacity. Over-[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory . 䊊 4 Co[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

Size Cold Tire Inflation Pressure Front Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Rear Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Spare Tire (T emporary) T145/80D17 420 kPa, 60 PSI T145/80R17 420 kPa, 60 PSI TIRE LABELING Federal law requi[...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three-[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Tire chains/cables should not be installed on P245/40VR19 size tires. Installation of the tire chains/cables on P245/40VR19 size tires will cause damage to the ve- hicle. If you plan to us[...]

Wheel nut tightening torque: 83 ft-lb (112 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels. ● Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressu[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ...............................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.[...]

FUEL RECOMMENDATION NISSAN recommends the use of premium un- leaded gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you may[...]

If any driveability problems such as engine stall- ing and difficult hot-starting are experienced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. T ake care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. E–85 fuel E-85 fuel is a mix[...]

ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve [...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. CVT (in “N” position) Ignition timing (degree B.T .D.C. at idle speed) C[...]

WHEELS AND TIRES Wheels 18 x 8.0J 19 x 8.0J Tires P245/45VR18 P245/40VR19 P245/40WR19 Spare tire T145/80D17 T145/80R17 Speed rating 18” V 19” V 19” W DIMENSIONS AND WEIGHTS Overall length in (mm) 190.6 (4,843) Overall width in (mm) 73.2 (1,860) Overall height in (mm) 57.9 (1,472) Front T rack 18 inch tire in (mm) 62.4 (1,585) 19 inch tire in [...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weig[...]

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0174 WTI0167 WTI0203 INSTALLING FRONT LICENSE PLATE T echnical and consumer info[...]

Use the following steps to mount the front license plate: 䊊 1 Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder. 䊊 2 Mount the license plate using two M6- 14mm bolts. License plate [...]

● V ehicle Capacity Weight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of t[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions also can affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The trans- mission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically de- crease engine powe[...]

Maximum Gross V ehicle Weight (GVW)/Maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle W eight Rating (GVWR) shown on the F .M.V .S.S./C.M.V .S.S. certification label. The GVW equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equ[...]

4,546 lb. (2062 kg) GVWR – 4,446 lb. (2016 kg) GVW = 100 lb. (45 kg) Available for tongue weight 1,000 lb. (454 kg) Capacity available for towing 100 lb. (45 kg) Available tongue weight / 1,000 lb. (454 kg) Available capacity = 10 % tongue weight The available towing capacity may be less than the maximum towing capacity due to the passen- ger and[...]

● The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut. Ball mount The hitch ball is attached to the ball mount and the ball mount is inserted into the hitch receiver. Choose a proper class ball mount based on the trailer weight[...]

T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type module/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal [...]

● When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly . If possible, have someone guide you when you are backing up. Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommende[...]

2. When the trailer sway stops, gently apply the brakes and pull to the side of the road in a safe area. 3. T ry to rearrange the trailer load so it is bal- anced as described earlier in this section. ● Be careful when passing other vehicles. Passing while towing a trailer requires con- siderably more distance than normal pass- ing. Remember, the[...]

DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 Traction AA T emperature A T readwear The treadwear grad[...]

For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exis[...]

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually , the ready condition[...]

A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic and adjustment pro- cedures, this manual is the same one used by the factory-trained technicians working at NISSAN dealerships. Also available are genuine NISSAN Owner’s Manu[...]

MEMO 9-28 T echnical and consumer information[...]

10 Index A Air bag (See supplemental restraint system) .................... .1-37 Air bag system Front (See supplemental front impact air bag system) .............. .1-44 Air bag warning light .......... .1-52, 2-13 Air cleaner housing filter ........... .8-18 Air conditioner Air conditioner service .......... .4-47 Air conditioner specification la[...]

Child restraints ...... .1-18, 1-18, 1-19, 1-21 Precautions on child restraints ........ .1-19, 1-25, 1-30, 1-34 T op tether strap anchor point locations . .1-23 Child safety rear door lock ........... .3-6 Chimes, audible reminders .......... .2-16 Cleaning exterior and interior .......... .7-2 Clock (models with navigation system) . . .4-12, 4-26[...]

Windshield-washer fluid .......... .8-14 F .M.V.S.S. certification label .......... .9-10 Fog light switch ................ .2-32 Folding rear seat ................. .1-5 Front air bag system (See supplemental restraint system) ..... .1-44 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fu[...]

V ehicle identification number (VIN) plate . .9-9 W arning labels (for SRS) ......... .1-51 LA T CH (Lower Anchors and T ethers for CHildren) System ..................... .1-21 License plate Installing the license plate ......... .9-11 Light Air bag warning light ........ .1-52, 2-13 Brake light (See stop light) ........ .8-27 Bulb check/instrument[...]

Phone, Bluetooth 姞 hands-free system ................ .4-115, 4-130 Power Power door locks .............. .3-5 Power outlet ................ .2-36 Power rear windows ............ .2-43 Power steering fluid ............ .8-12 Power steering system .......... .5-21 Power windows .............. .2-42 Rear power windows ........... .2-43 Precautions [...]

Sunglasses holder ............... .2-38 Sunroof (see Moonroof) ............ .2-45 Supplemental air bag warning light . . .1-52, 2-13 Supplemental front impact air bag system . . .1-44 Supplemental restraint system Information and warning labels ...... .1-51 Precautions on supplemental restraint system ................... .1-37 Supplemental restrain[...]

Engine oil pressure warning light ..... .2-12 Hazard warning flasher switch ...... .2-33 Low fuel warning light ....... .2-13, 2-23 Low tire pressure warning light ...... .2-12 Low windshield-washer fluid warning light ..................... .2-23 Passenger air bag and status light .... .1-46 Seat belt warning light ........... .2-13 V ehicle securi[...]

RECOMMENDED FUEL: NISSAN recommends the use of premium un- leaded gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regu- lar gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you may[...]

® 2011 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2011 N IS SAN MAX I MA A35-D Printing : August 2010 (06) Publication No.: Printed in U .S.A. A35-D OM1E 0A35U0[...]