Nissan Altima Hybrid (2011) инструкция обслуживания

® 2011 A L T IM A H Y BRID OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2011 N I SSAN AL TI MA HYB R I D H L32-D H L32-D Printing : August 2010 (06) Publication No.: OM0E 0L32U2 Printed in U .S.A. OM1E H L32U0[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and with- ou[...]

BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon and Clarion. XM Radio 威 requires subscription, sold separately. Not available in Alaska, Hawaii or Guam. For more information, visit www.xmradio.com. © 2010 NISSAN NORTH AMERICA , INC. All rights reserved. No part of this Owner’s Manual may be reproduced [...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents HEV Overview Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical an[...]

[...]

HEV Overview Hybrid System ................................. HEV-2 High voltage battery ............................ HEV-2 High voltage cautions ........................... HEV-2 Road accident cautions ......................... HEV-3 Emergency shut off system ................... HEV-3 Energy Monitors ................................ HEV-3 P ower me[...]

The Hybrid System combines the power of a gasoline engine and an electric motor to minimize fuel consumption and emissions. Depending on driving conditions, the vehicle runs on a combination of the gasoline engine and the electric motor, whichever is best for those condi- tions. Because the gasoline engine charges the high voltage battery as needed[...]

WARNING ● Pull your vehicle off the road, put the transmission in the P (Park) position, apply the parking brake and turn the Hybrid System off. ● Check to see if there are exposed high voltage parts and cables. Never touch the parts and cables. See “High voltage components” , later in this section for the locations of the high voltage part[...]

POWER METER The power meter indicates the total amount of power in the hybrid system. For additional information, see “Meters and gauges” in the “Instruments and controls” section of this manual. HIGH VOL T AGE BA TTERY ST A TUS METER The gauge indicates the amount of power in the high voltage battery . For additional information, see “Me[...]

Press the INFO button on the control panel, then touch the “Energy Flow” key on the screen. This is an example of the Energy Flow display. The Energy Flow display varies, depending on the condition of the vehicle. The graphic does not reflect the actual motion of the vehicle. The Energy Flow will display: ● When the vehicle is powered only by[...]

Press the INFO button on the control panel, and then touch the “Fuel Economy History” key on the screen. The Fuel Economy History can be displayed on the navigation system monitor. The screen must be set to the Energy Flow mode or the Fuel Economy History mode. This displays the vehi- cle’s average fuel consumption and regenerative electric p[...]

Place the ignition switch in the ON position. Depress the brake pedal and push the ignition switch when the transmission is in the P (Park) position to start the Hybrid System. The READ Y light illuminates indicating that the vehicle is ready to be driven. If the ambient tem- perature is low , the READY may flash and may take time until the READ Y [...]

HIGH VOL T AGE COMPONENTS WARNING ● The Hybrid System uses high voltage up to 650 V. The system can be hot while and after starting. Be careful of both the high voltage and the high temperature. Obey the caution labels attached to the vehicle. ● Never touch, disassemble, remove or replace the high voltage parts, cables and their connectors. Hig[...]

1. Air conditioner compressor location 2. Electric power steering location 3. 42V DC/DC converter 4. High voltage battery and 12V DC/DC converter 5. Service disconnect 6. High voltage harnesses 7. T raction motor location 8. Inverter unit The Hybrid System uses high voltage up to 650 V . High voltage components are indicated in the illustration. Hi[...]

acceleration also consumes high voltage battery power, resulting in poor acceleration. Battery power can be restored by driving at a constant speed. When you put the shift selector in the B (Brake) position and take your foot off the accelerator pedal, engine braking will be applied. However, during high speed driving you may feel that en- gine bra[...]

CAUTION Do not load large amounts of water in open containers (aquariums or buckets) into the vehicle. If the water spills onto the high voltage battery, it may cause a short circuit and damage the battery. CAUTION Do not allow any liquid to get on or in the air vent. It may cause a short circuit and damage the high voltage battery. LHV0007 LHV0008[...]

MEMO HEV-12 HEV Overview[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. T op tether strap anchor (P . 1-22) 2. Rear seat belts (P . 1-10) 3. Roof-mounted curtain side-impact supplemental air bag (P . 1-35) 4. Front seat-mounted side-impact supplemental air bag (P . 1-35) 5. Head Restraints (P . 1-6) 6. Front seat belts (P . 1-10) 7. Side-impact air bag pressure sensor (driver’s side shown; passenger’s side simil[...]

1. P ower windows (P . 2-41) 2. Windshield (P . 8-18) 3. Windshield wiper and washer switch (P . 2-29) 4. Engine hood (P . 3-18) 5. Tie down (P . 6-13) 6. Headlight and turn signal switch (P . 2-30) 7. Replacing bulbs (P . 8-25) 8. Tire pressure (P . 8-32) 9. Flat tire (P . 6-2) 10. Tire chains (P . 8-39) 11. Mirrors (P . 3-24) 12. Door locks, NISS[...]

1. Antenna (P . 4-83) 2. Rear window and outside mirror (if so equipped) defroster switch (P . 2-30) 3. Interior trunk lid release (P . 3-19) 4. T runk lid (P . 3-18) 5. V ehicle loading (P . 9-12) 6. Exterior trunk lid release (P . 3-13) 7. Replacing bulbs (P . 8-25) 8. Fuel-filler cap, fuel recommendation (P . 3-20, P . 9-28) 9. Fuel-filler door [...]

1. Center armrest (P . 1-5) 2. Moonroof (if so equipped) (P . 2-44) 3. Sun visors (P . 3-23) 4. Interior lights, illuminated entry (P . 2-46) 5. HomeLink 姞 universal transceiver (if so equipped) (P . 2-48) 6. Automatic anti-glare rearview mirror (if so equipped) (P . 3-24) 7. Glove box (P . 2-39) 8. Front cup holders (P . 2-38) 9. Front console ([...]

1. V ents (P . 4-18) 2. Headlight/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands-free Phone System (if so equipped)(P . 4-81, 4-85) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-35, 2-34) 6. Cruise control main/set switch (P . 5-15) 7. Windshield wiper/washer[...]

1. Brake fluid reservoir (P . 1-22) 2. Engine oil filler cap (P . 8-11) 3. Air cleaner (P . 8-17) 4. Fuse/fusible link box/jump-start location (P . 8-20) 5. Fuse box (P . 8-20) 6. Inverter coolant reservoir (P . 8-10) 7. Engine oil dipstick (P . 8-11) 8. Radiator cap (P . 8-8) 9. Drive belt location (P . 8-16) 10. Engine coolant reservoir (P . 8-8)[...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-10 or Brake warning light (red) 2-10 12-volt battery charge warning light 2-11 Electric power steering warning light 2-11 Electronically con- trolled brake warn- ing light (yellow) 2-12 Engine oil pressure warning light 2-12 W arning light Name Page High temperature warnin[...]

Indicator light Name Page Slip indicator light 2-17 T urn signal/hazard indicator lights 2-17 Illustrated table of contents 0-9[...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment (for passenger’s seat and if so equipped for driver’s seat) ...................................1 - 2 Front power seat adjustment (if so equipped for driver’s seat) ..................1 - 4 Center a[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to loc[...]

FRONT POWER SEA T ADJUSTMENT (if so equipped for driver’s seat) Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the Hybrid System is not in the READY mode.[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the switch forward or backward to adjust the seatback lumbar area. CENTER ARMREST Pull the armrest down unti[...]

HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint stalks o[...]

Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. WRS0134 LRS0888 LRS0889 Safety—Seats, seat belts and supplemental restraint system 1-7[...]

Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob and release knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the vehicle. 5. Reinstall and properly adjust the head re- stra[...]

Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occu- pant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST . A lap belt worn too h[...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulle[...]

Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly. [...]

WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chanc[...]

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way [...]

LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) . A booster seat should be used to obtain proper seat belt fit. NISSAN recom[...]

– Infants and children should never be held on anyone’s lap. Even the stron- gest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another passenger. – NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the[...]

● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures. All U.S. states and Canadian pro[...]

LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that[...]

T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts. See “In- stalling top tether strap” later in this section. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. Anchor [...]

3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the[...]

5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 2 through 4. REAR-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR[...]

Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used [...]

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test [...]

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH Refer to all W arnings [...]

4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 5. Tighten the tether [...]

Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be [...]

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in[...]

8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

INST ALLING T OP TETHER STRAP First, secure the child restraint with the LA T CH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 䊊 1 from the anchor point which is located directly behind the child seat. 2. Position the top tether strap over the top of the seatback 䊊 2 . 3. Secure t[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child Safety” , “Child Restraint” and “Booster Seats” sections before installing a child restraint. Follow these steps to install a booster [...]

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjusting the sea[...]

Roof-mounted curtain side-impact supple- mental air bag system: This system can help cushion the impact force to the head of occu- pants in front and rear outboard seating positions in certain side-impact collisions. The curtain side-impact air bags are designed to inflate on the side where the vehicle is impacted. These supplemental restraint syst[...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● Th[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1041 ARS1042 ARS1043 1-38 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the fron[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, rollover or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of[...]

SSS0159 SSS0162 Safety—Seats, seat belts and supplemental restraint system 1-41[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Side-impact air bag pressure sensor (driver’s side shown; passenger’s side similar) 6. Supplemental front-impact air bag mod-[...]

NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with the NISSAN Ad- vanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regu- lations. It is also permitted in Canada. However, all of the information, cautions and warn- ings in this manual still a[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

NISSAN recommends that pre-teens and chil- dren be properly restrained in a rear seat. NISSAN also recommends that appropriate child restraints and booster seats be properly installed in a rear seat. If this is not possible, the occupant classification sensor is designed to operate as described above to turn the front passenger air bag OFF for spec[...]

● Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave per- manent impressions in the seat. Such objects can damage the seat or occu- pant classification sensor (pattern sen- sor) . This can affect the operation of the air bag system and result in serious personal injury. ● Do not use w[...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to [...]

● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and cur[...]

The pretensioner system activates in conjunction with the front air bag system. W orking with the seat belt retractor, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased within the seat belt retractor. These seat belts are used the sa[...]

SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact supplemental air bag and seat belt pretensioner systems. The monitored circuits inc[...]

● The front air bag, side air bag, curtain air bag systems and the pretensioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of a supplemen- tal air bag or pretensioners or scrap the vehicle, contact a NISSAN dealer. Incor- rect disposal procedures[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 3 P ower meter ...................................2 - 4 High voltage battery status meter .................2 - 5 Fuel gauge ...................................[...]

Console light (if so equipped) ................... 2-46 Personal Lights ................................... 2-47 Map lights ....................................... 2-47 T runk light ....................................... 2-47 HomeLink 姞 universal transceiver (if so equipped) ..... 2-48 Programming HomeLink 姞 ....................... 2-48 Progra[...]

1. V ents (P . 4-18) 2. Headlight/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands-free Phone System (if so equipped)(P . 4-81, 4-85) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-35, 2-34) 6. Cruise control main/set switch (P . 5-15) 7. Windshield wiper/washer[...]

1. P ower meter 2. Speedometer 3. Fuel gauge 4. High voltage battery status meter 5. Odometer/twin trip odometer/trip com- puter 6. V ehicle Information Display 1. Speedometer 2. Odometer 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is dis[...]

The twin trip odometer records the distance of individual trips. Changing the display: Pushing the change button changes the display as follows: T rip → T rip → T rip Resetting the trip odometer: Pushing the change button for more than 1 sec- ond resets the currently displayed trip odometer to zero. POWER METER The power meter indicates the tot[...]

HIGH VOL T AGE BA TTERY ST A TUS METER The gauge indicates the amount of power that is left in the high voltage battery. The ideal battery charge is within the normal range 䊊 1 when the gauge needle points within the zone shown in the illustration. FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly [...]

This unit measures terrestrial magnetism and in- dicates the direction of the vehicle’s heading. With the ignition switch placed in the ON posi- tion, press the button as described in the chart below to activate various features of the automatic anti-glare rearview mirror. Push and hold the button for about: Feature: (Push button again for about [...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 5 second[...]

1. With the display turned on, press and hold the switch for about 9 seconds. The display will read “C.” 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) . 3. After completing the circles the display should return to normal. ● If the compass deviates from the correct indication soo[...]

or Anti-lock Braking System (ABS) warning light Hybrid System warning light High beam indicator light (blue) or Brake warning light (red) Low tire pressure warning light Low temperature indicator light (blue) 12–volt battery charge warning light Master warning light Malfunction Indicator Light (MIL) Electric power steering warning light Seat belt[...]

The following light comes on briefly and then goes off: If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly. W ARNING LIGHTS For additional information on warnings and indi- cators, see “V ehicle information display” later in this section. or Anti-lock B[...]

WARNING ● Y our brake system may not be working properly if the warning light is on. Driv- ing could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driv- ing it could be dangerous. ● Pressing the brake pedal with the igni- tion switch placed in the[...]

When the ignition switch is placed in the ON position, the power steering warning light illumi- nates. After the Hybrid System is in the READY mode, the power steering warning light turns off. This indicates the power steering system is op- erational. If the power steering warning light illuminates while the Hybrid System is in the READY mode, it m[...]

CAUTION If the high temperature warning light illu- minates while the engine is running, it may indicate the engine temperature is extremely high. Stop the vehicle safely as soon as possible. If the vehicle is over- heated, continuing vehicle operation may seriously damage the engine. See “If your vehicle overheats” in the “In case of emer- g[...]

TPMS malfunction: If the TPMS is not functioning properly, the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. The CHECK TIRE PRES- SURE warning is not displayed if the low tire pressure warning light illuminates to indicate a[...]

the ON position, the system does not activate the warning light for the front passenger. Refer to “Seat belts” in the “Safety—Seats, seat belts and supplemental restraint system” section for precautions on seat belt usage. Supplemental air bag warning light When the ignition switch is placed in the ON or ST ART position, the supplemental [...]

High beam indicator light (blue) This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. Low temperature indicator light (blue) The low temperature indicator light illuminates when the engine coolant temperature is l[...]

CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission con- trol system. Ready operation indicator light (green) The ready indicator light illuminates when the Hybrid System is powered and the vehicl[...]

The vehicle information display 䊊 1 is located on the bottom of the speedometer. It displays such items as: ● cruise control system information ● Intelligent Key operation information ● some indicators and warnings ● other information For details about the Intelligent Key , see “NISSAN Intelligent Key™” in the “Pre-driving checks [...]

Average speed mode The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset. Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance driven since the last reset. Range mode The range mode can be selected to give you an estimation of the distance that c[...]

Exterior temperature mode The exterior temperature mode can be selected to provide you with the temperature outside of your vehicle. Setting mode The setting mode allows you to set reminders or preferences for alerts, maintenance intervals or language displays. In the setting mode screen press to move to: ● Alert ● Maintenance ● Display and p[...]

Reset mode The reset mode can be selected in any screen that allows for preferences to be programmed. Once the screen is selected, you have the option to reset the selected distances or time to a new setting. Maintenance mode The maintenance mode allows you to set alerts for the reminding of maintenance intervals for the following: ● engine oil ?[...]

Display mode The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pressing . Language: English or French Unit: US — mile, °F , MPG Metric — km, °C, L/100 km Y ou can select the language and unit using the button and pressing . The settings are automatically saved when you exit the menu by pressing the BACK butto[...]

Indicators for maintenance 1. Engine oil replacement indicator This indicator appears when the customer set distance comes for changing the engine oil. Y ou can set or reset the distance for changing the engine oil. See “Maintenance mode” earlier in this section. 2. Oil filter replacement indicator This indicator appears when the customer set d[...]

V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning 6. Parking brake indicator 7. Shift P warning 8. Cruise main switch indicator 9. Cruise set switch indicator 10. Hybrid system operation indicator 11. EV mode indicator LIC2[...]

12. NISSAN Intelligent Key™ insertion indicator 13. NISSAN Intelligent Key™ removal indicator 14. NISSAN Intelligent Key™ battery discharge indicator 15. Loose fuel cap warning Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning After the Shift P warning illumi[...]

Cruise main switch indicator This indicator illuminates when the cruise control main switch is pushed. The indicator turns off when the main switch is pushed again. When the cruise main switch indicator illuminates, the cruise control system is operational. Cruise set switch indicator light The light comes on while the vehicle speed is controlled b[...]

Y our vehicle may have two types of security sys- tems: ● V ehicle security system ● NISSAN V ehicle Immobilizer System VEHICLE SECURITY S Y STEM The vehicle security system provides visual and audible alarm signals if someone opens the doors or trunk lid when the system is armed. It is not, however, a motion detection type system that activate[...]

The alarm is activated by: ● opening the door or trunk lid without using the key or Intelligent K ey (even if the door is unlocked by releasing the door inside lock switch) . How to stop an activated alarm The alarm stops only by unlocking the driver’s door or the trunk lid with the key, pressing the button on the Intelligent K ey, or press- in[...]

SWIT CH OPERA TION The windshield wiper and washer switch oper- ates when the ignition switch is placed in the ON position. Push the lever down to operate the wiper at the following speed: 䊊 1 Intermittent — intermittent operation can be adjusted by turning the switch toward 䊊 A (Slower) or 䊊 B (Faster) . Also, for vehicles equipped with sp[...]

T o defrost the rear window glass and outside mirrors (if so equipped) , start the Hybrid System and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION Wh[...]

CAUTION Use the headlights with the Hybrid System running to avoid discharging the vehicle battery. Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- to[...]

Be sure you do not put anything on top of the autolight sensor located on the top side of the instrument panel. The autolight sen- sor controls the autolight ; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the Hybrid System off and the ignition switch placed i[...]

WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the igni- tion switch is placed in the ON position. The inst[...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

The front seats are warmed by built-in heaters. The switches are located on the center console. 1. Start the Hybrid System. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remai[...]

CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw.[...]

SEA TBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION [...]

CUP HOLDERS T o open the front cup holders, push the cup holder lid. T o close, lower the cup holder lid and push down until it clicks in place. The plastic insert may be removed for cleaning. The rear cup holders are located in the fold-down armrest in the rear seat back. CAUTION ● Avoid abrupt starting and braking when the cup holder is being u[...]

GL OVE BO X Open the glove box by pulling the handle. When locking 䊊 1 or unlocking 䊊 2 the glove box, use the master key . WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX Upper half Pull up on the driver’s side latch to open the upper half of the console box. The mat (if so [...]

COVERED ST ORAGE BO X Push the center of the lid to open. GROCER Y HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than 20 lbs (9 kg) to a single grocery hook. CARGO NET (if so equipped) WARNING Properly secure all cargo with ropes or straps to h[...]

T o install the cargo net, attach the net to the retainers. T o remove the cargo net, detach the net from the cargo net retainers. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power [...]

Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window , push the switch to the first detent and continue to hold down until the de- sired window position is reached. T o close a window , pull the switch to the first detent and continue to hold down unti[...]

Automatic operation T o fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way . T o stop the window, lift the switch up while the window is opening. T o fully close a window equipped with [...]

AUT OMA TIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for about 45 sec- onds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to[...]

the 䊊 2 position again. After a delay of four seconds, the moonroof will make a small movement and backup. 3. Release the switch. 4. Within 5 seconds of releasing the switch, push and continuously hold the switch toward 䊊 2 . The moonroof will move from the tilt position to the open position and back to the close position. NO TE: If the switch [...]

The interior light has a three-position switch and operates regardless of ignition switch position. ● When the switch is in the ON position 䊊 1 , the interior light illuminates, regardless of door position. The light will go off after 15 minutes unless the ignition switch is placed in the ON position. ● When the switch is in the center DOOR p[...]

T o turn the rear personal lights on, press the switch. T o turn them off, press the switch again. NO TE: Do not use for extended periods of time with the Hybrid System stopped. This could result in a discharged battery. T o turn the map lights on, press the light lens. T o turn them off, press the lens again. NO TE: Do not use for extended periods[...]

The HomeLink 姞 Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink 姞 Universal T ransceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity syste[...]

3. Using both hands, simultaneously press and hold both the HomeLink 姞 button you want to program and the hand-held transmitter but- ton. DO NO T release the buttons until step 4 has been completed. 4. Hold down both buttons until the indicator light on the HomeLink 姞 flashes, changing from a “slow blink” to a “rapidly flashing blink” .[...]

NO TE: When programming a garage door opener, etc ., it is advised to unplug the device dur- ing the “cycling” process to prevent pos- sible damage to the garage door opener components. OPERA TING THE HOMELINK 姞 UNIVERSAL TRANSCEIVER The HomeLink 姞 Universal T ransceiver (once pro- grammed) may now be used to activate the ga- rage door, etc[...]

NO TE: Following step 2, there are 30 seconds in which to initiate step 3. 3. Firmly press and release the programmed HomeLink 姞 button a second time to com- plete the training process. (Some garage door openers may require you to do this procedure a third time to complete the train- ing.) The garage door opener should now recognize the HomeLink [...]

MEMO 2-52 Instruments and controls[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent Key™ ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ............................................3 - 4 Locking with key ................................3 - 4 Locking with inside lock knob . [...]

1. T wo Intelligent K eys 2. Mechanical keys (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT KEY™ Y our vehicle can only be driven with the Intelligent K ey which are registered to your vehicle’s Intelli- gent Key components and NISSAN V ehicle Im- mobilizer System components. Never leave these keys in the vehicle. As many as[...]

Mechanical key The Intelligent Key contains the mechanical key. T o remove the mechanical key , release the lock knob on the back of the Intelligent Key . T o install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position. Use the mechanical key to lock or unlock the doors, trunk lid and glove[...]

Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with salt water. This could affect system function. When the doors are locked using one of the following methods, the doors can not[...]

Opening and closing windows (if so equipped) The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● T o close the windows, turn the drive[...]

Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically . With the Intelligent K ey left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock auto[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed. The FA A advises the radio waves may affect aircraft navigation and comm[...]

CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against anoth[...]

OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 䊊 1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent Key operating range becomes narrower, and the Intelligent Key[...]

● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent Key with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLIG[...]

NO TE: ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position. ● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical key even if any door is open. ● Doors do not lock with the door handle request switch with the Intellige[...]

Unlocking doors 1. Carry the Intelligent Key . 2. Push the door handle request switch 䊊 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 5 seconds to unlock all doors. If a door handle is pulled while unlocking the doors, that door may not be unlocked. Return[...]

Opening the trunk lid 1. Push the trunk opener request switch 䊊 A for more than 1 second while carrying the Intel- ligent Key with you. 2. The trunk will unlatch. A chime will sound 4 times. 3. Raise the trunk lid to open the trunk. Lockout protection T o prevent the Intelligent Key from being acci- dentally locked in the trunk, lockout protectio[...]

CAUTION After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles. Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 5 sec- onds to unlock all doors. All doors will be locked automatically un[...]

Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. See “Cancel switch” in this section. Using the panic alarm If you are near your vehicle and feel threatened[...]

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent Key . T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated. T o activate: Press and hold the and buttons for at least 2[...]

TROUBLESHOO TING GUIDE V erify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When pushing the ignition switch to stop the Hybrid System The SHIFT P warning appears on the [...]

䊊 1 Pull the hood lock release handle located below the driver’s side instrument panel; the hood springs up slightly . 䊊 2 Lift the lever at the front of the hood with your fingertips and raise the hood. 䊊 3 Remove the support rod from the clamp. 䊊 4 Insert the support rod into the hole on the passenger’s side of the hood. 䊊 5 When cl[...]

● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously in- jured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. T o open the trunk lid, push the opener switch down. [...]

T o open the trunk from the inside, pull the illumi- nated release handle until the lock releases and push up on the trunk lid. The release handle is made of a material that glows in the dark after a brief exposure to ambient light. The handle is located inside the trunk compart- ment on the interior of the trunk lid. OPENER OPERA TION The fuel-fil[...]

● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. T o reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling. – Do not use electronic devices[...]

Loose Fuel Cap warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. T o turn off the warning, do the following: 1. Remove and install the fuel-filler cap as soon as possible. See “Fuel-filler cap” . 2. Tighten the fuel-filler cap u[...]

䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the sun visor from the center mount and swing the sun visor to the side. 䊊 3 Slide the extension sun visor (if so equipped) in or out as needed. CAUTION Do not store the sun visor before returning the extension to its original position[...]

REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. AUT OMA TIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror [...]

T o turn on the automatic anti-glare feature again, press: ● the | button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn on. For information on HomeLink 姞 Universal T rans- ceiver operation, see the “HomeLink 姞 Universal T ransceiver” in the “Instruments and controls” [...]

Manual folding outside mirrors (if so equipped) Pull the outside mirror toward the door to fold it. WPD0056 3-26 Pre-driving checks and adjustments[...]

MEMO Pre-driving checks and adjustments 3-27[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 2 How to use the touch screen ....................4 - 3 How to select menus on the screen ..............4 - 5 How to use the INFO button .....................4 - 5 How to use the SETTING[...]

Car phone or CB radio ............................ 4-84 Bluetooth 姞 Hands-Free Phone System without Navigation System (if so equipped) ................. 4-85 Regulatory Information . ........................ 4-86 Using the system .............................. 4-87 Control buttons ............................... 4-89 Getting started .............[...]

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a[...]

When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. Reference symbols: “Example” — Words marked in quotes refer to a key shown only on the display. These keys can be selected by touching [...]

Adjusting the item: T ouch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item. T ouch the up arrow 䊊 3 to scroll up the page one item at a time, or touch the double up arrow 䊊 4 to scroll up an entire page. T ouch the down arrow 䊊 5 to scroll down the page one item at a time, or touch the double down arrow ?[...]

HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen (for example, pres[...]

Where am I? Refer to the separate Navigation System Own- er’s Manual for information regarding this item. T raffic Info Refer to the separate Navigation System Own- er’s Manual for information regarding this item. W eather Info Refer to the separate Navigation System Own- er’s Manual for information regarding this item. Map Update Refer to th[...]

Display settings Select the “Display” key . On the screen above, select the “Display Adjustment” key. The Display Adjustment screen will appear. Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. T ouch the “+” or “-” key to adjust the brigh[...]

T o turn the screen on: ● Press the SETTING button and select the “Display” key and then select the “Display ON” key, or ● Press the button and the message “resuming display” will appear and the “Dis- play ON” key will be automatically turned on (no amber indicator) . Background color: Select the “Background Color” key; the [...]

Clock Format (24h) : When this item is enabled (indicator light illumi- nated) , the clock format will change from the default 12-hour display to a 24-hour display. Offset (hour) : Adjust the time by increasing or decreasing the hours. Offset (minute) : Adjust the time by increasing or decreasing the minutes. Daylight Savings Time: When this item i[...]

Others settings Select the “Others” key. Comfort settings, lan- guage and units and V oice Recognition settings will be displayed. Comfort settings Select the “Others” key, then select the “Com- fort” key. The Comfort settings screen will be displayed. Y ou can set the following operating conditions by selecting the key for the desired [...]

Speed Sensing Wiper Interval: Select to turn on or turn off the wiper interval adjusted automati- cally according to the vehicle speed. Selective Door Unlock: When this item is turned on, only the driver’s door is unlocked first after the door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Navigation settings Refer to the separate Navigation System Own- er’s Manual for informat[...]

Press and hold the button for more than two seconds to turn the display off. Press the button again to turn the display on. When the shift selector is shifted into the R (Reverse) position, the monitor display shows the view directly to the rear of the vehicle. WARNING ● The system is designed as an aid to the driver in detecting large stationary[...]

They are indicated as reference distances to objects. The lines and colors in the display indi- cate distances from the back bumper line 䊊 A in the illustration. 䊊 1 1.5 ft (0.5 m) red 䊊 2 3 ft (1 m) yellow 䊊 3 7 ft (2 m) green 䊊 4 10 ft (3 m) green The vehicle clearance lines are wider than the actual clearance. DIFFERENCE BETWEEN PREDIC[...]

the hill is the place 䊊 B . Note that any object on the hill is further than it appears on the monitor. Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but [...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. ADJUSTING THE SCREEN The[...]

● Do not adjust the Brightness or Contrast of the RearView Monitor while the vehicle is moving. For vehicles with a touch screen (T ype B): ● T o adjust the Brightness, Contrast, Display ON/OFF and Color of the RearView Moni- tor, press the SETTING button and then select the “Display” key with the RearView Monitor on. When the display adjus[...]

Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. Right and Left WHA0736 Center WHA0737 Rear (if so equipped) WHA0688 VENTS 4-18 Monitor, climate, audio, phone and voice recognition systems[...]

1. Driver temperature control dial 2. Air flow control buttons 3. Passenger temperature control dial 4. DUAL button 5. Rear defrost button 6. Front windshield defrost button 7. Fan speed dial/system OFF button 8. Air recirculation button 9. A/C ON/OFF button 10. AUT O button WARNING ● The air conditioner cooling function op- erates only when the [...]

2. T urn the driver’s side temperature control dial to the left or right to set the desired temperature. Driver and passenger tem- peratures can be set independently. Press DUAL or turn the passenger temperature control dial to the left or right to activate dual climate control functions. T urn the passen- ger’s side temperature control dial to[...]

OPERA TING TIPS ● When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ture warms up, air flow from the foot outlets will operate normally . The sunload sensor, located on the top of t[...]

RADIO With the ignition placed in the ACC or ON posi- tion, press the PWR (power)/VOL (volume) knob to turn the radio on. If you listen to the radio with the engine not running, the ignition should be placed in the ACC position. Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridges, mountains [...]

SA TELLITE RADIO RECEPTION (if so equipped) When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a mal- function. W ait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the [...]

● CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly. ● The following CDs may not work prop- erly: ● Copy control compact disc s (CCCD) ● Recordable compact disc s (CD-R) ● Rewritable compact disc s (CD-RW) ● Do not use the following CDs as they may cause the CD player to malfunc-[...]

● Do not use the following CDs/DVDs as they may cause the CD/DVD player to malfunction. ● 3.1 in (8 cm) disc s ● CDs/DVDs that are not round ● CDs/DVDs with a paper label ● CDs/DVDs that are warped, scratched, or have abnormal edges ● This audio system can only play pre- recorded CDs/DVDs. It has no capa- bilities to record or burn CDs/[...]

● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc., as long as the permit from Macrovision Corporation is not issued. ● Modifying or disassembling is prohib- ited. ● Dolby digital is manufactured under li- cense from Dolby Laboratories, Inc . ● Dolby and th[...]

● If you are using an iPod 姞 (3rd Generation with Dock connector) , do not use very long names for the song title, album name or artist name to avoid the iPod 姞 resetting itself. iP od 姞 is a trademark of Apple Inc., registered in the U.S. and other countries. Bluetooth 姞 streaming audio (if so equipped) ● Some Bluetooth 姞 audio devic[...]

● Bit rate — Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file. ● Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversi[...]

Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling fr[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista 姞[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th[...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX 姞 codec owned by Div, Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – A VI stands for Audio Video Interleave. It is standard file format originated by Micro- soft Corporation. A .divx encoded file can be sav[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the [...]

1. SEEK/TRACK button 2. CD insert slot 3. TUNE/FF·REW button 4. CD eject button 5. AUDIO button (BASS, TREBLE, F ADE and BALANCE) 6. CL OCK button 7. AUX IN jack 8. SCAN button 9. RDM/RPT button 10. PWR/VOL control knob 11. AUX button 12. RADIO button 13. CD button 14. DISP button 15. PRESET A·B·C button 16. Station select (1 - 6) buttons 17. pa[...]

AUDIO button (Bass, Treble, Fade and Balance) Press the AUDIO button to change the mode as follows: Bass → T reble → Fade → Balance → Beep ON/OFF → Audio → Bass T o adjust Bass, T reble, Fade and Balance press the AUDIO button until the desired mode ap- pears in the display . Press the TUNE/FF·REW or to adjust Bass and T reble to the d[...]

When the RADIO button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. If a compact disc is playing when the RADIO button is pressed, the compact disc will auto- matically be turned off and the last radio station played will come on. The FM stereo indicator, ST , illuminates durin[...]

SEEK/TRACK button: When is pressed while the compact disc is playing, the next track following the present one starts to play from the beginning. Press several times to skip several tracks. Each time the button is pressed, the CD ad- vances 1 additional track. The track number ap- pears in the display window. (When the last track on the compact dis[...]

1. SCAN button 2. Station select (1 - 6) buttons 3. CD insert slot 4. Display screen 5. iP od MENU button 6. CD eject button 7. SEEK/CA TEGORY button 8. SETTING/ENTER button, SCROLL/ TUNE knob 9. AUX IN jack 10. AUX button 11. CD button 12. AM-FM button 13. RPT button 14. VOL/ON-OFF control knob 15. RDM button *No satellite radio reception is avail[...]

T o turn the system off, press the VOL/ON·OFF control knob. T urn the VOL/ON·OFF control knob to adjust the volume. This vehicle may be equipped with Speed Sen- sitive V olume (SSV) for audio. When this feature is active, the audio volume changes as the driving speed changes. Setting control knob (Audio, Display and Clock) : Press the SETTING but[...]

Display settings: T o adjust the brightness or contrast of the display screen, press the SETTING button until the cho- sen setting is displayed. Use the SCROLL/TUNE knob to adjust the display to the desired level. On-screen Clock: The clock is shown in the upper right corner of the screen. T o turn this feature off or to re-enable the clock display[...]

iPod 姞 MENU button This button can only be used for iP od 姞 opera- tions. See “iP od 姞 player operation without Navi- gation System” later in this section for details about the function of this button. FM/AM/SA T radio operation AM·FM button: Press the AM·FM button to change the band as follows: AM → FM1 → FM2 → AM If another audi[...]

If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation Place the ignition switch in the ACC or ON position and carefully insert the compact disc into the slot with the label side up. The compact disc is automatically pulled into the s[...]

SCROLL/TUNE knob (MP3/WMA CD only) : If an MP3/WMA CD with multiple folders is play- ing, turn the SCROLL/TUNE knob to change folders. T urn the knob to the left to skip back a folder. T urn the knob to the right to skip ahead a folder. RPT button: When the RPT button is pressed while a com- pact disc is playing, the play pattern can be changed as [...]

1. OPEN/TIL T button (Screen tilts down to expose CD/DVD insert slot) 2. Display screen 3. SETTING button 4. AUDIO button/control knob 5. Station select (1 - 6) buttons 6. Seeking button 7. VOL/ON·OFF control knob 8. DISC·AUX button 9. XM button* 10. FM·AM button 11. button *No satellite radio reception is available when the XM button is pressed[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Bal- ance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until t[...]

Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key. When the feature is activated, the amber indica- tor next to the word ON will illuminate. CD, DVD or USB with compressed audio file[...]

XM band select : Press the XM button to change the band as follows: XM1* → XM2* → XM3* → XM1 (satellite, if so equipped) When the XM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed[...]

Menu (XM , if so equipped) Select the “Menu” key to see a list of options: ● Preset List – Displays the list of presets. Press and hold the key on the touchscreen to save a preset. ● Customize Channel List – deselect chan- nels to skip while using the TUNE/FOLDER knob. ● Favorite Artist & Songs – T ags the current artist or song[...]

If the system has been turned off while the compact disc was playing, pressing the VOL/ON·OFF con- trol knob will start the compact disc. DISC·AUX button: When the DISC·AUX button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play . When the DISC·AUX button is pressed with[...]

● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: 1 T rack Repeat - the current track is repeated. 1 Disc Random- tracks from the entire disc are played randomly . 1 Folder Repeat (compressed audio files CD only) - the current folder[...]

● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. ● Title T ext Priority ● Record to Music Box, Automatic Recording, Recording Quality For more information about these options, see “Music Box 姞 ” in this section. CD EJECT button: T o eject a CD, press the OPEN/TIL T button to[...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

For more information about the Music Box 姞 fea- ture available with this system, see “Music Box 姞 ” in this section. For more information about the Bluetooth 姞 streaming audio feature available with this sys- tem, see “Bluetooth 姞 streaming audio” in this section. DIGIT AL VERSA TILE DISC (DVD) PLA YER OPERA TION (models with Naviga[...]

Playing a DVD Inserting/Ejecting the DVD The CD/DVD insert slot is located behind the display screen. T o insert the DVD, press the OPEN/TIL T button on the audio unit. The display screen will automatically move down to expose the CD/DVD insert slot. Insert the DVD into the slot with the label side facing up. The DVD will be guided automatically in[...]

PLA Y : Select the key to start playing the DVD or resume playing the DVD after it has been paused. ST OP: Select the key to stop playing the DVD. NEXT/PREVIOUS CHAPTER: Select the key to skip the chapter(s) of the disc forward. Select the key to skip the chapter(s) of the disc backward. The chapters will advance forward or backward the number of t[...]

● Angle Mark (DVD-VIDEO) When this item is turned on, an angle mark will be shown on the bottom of the screen if the scene can be seen from a different angle. ● Menu Skip (DVD-VIDEO) DVD menus are automatically configured and the contents will be played directly when the “Menu Skip” key is turned on. Note that some discs may not be played d[...]

Audio file operation AUX button: Place the ignition switch in the ON or ACC position and press the AUX button to switch to the USB input mode. If another audio source is plugged in through the AUX IN jack on the radio, the AUX button toggles between the two sources. Play information Information about the audio files being played can be displayed on[...]

RDM button: When the RDM button is pressed while an audio file on the USB device is playing, the play pattern can be changed as follows: ALL RDM → 1 FOLDER RDM → OFF ALL RDM: all tracks on the USB device will be played randomly . 1 FOLDER RDM: all tracks in the current folder will be played randomly . OFF: No random play pattern is applied. The[...]

played. Use the touchscreen to select the pre- ferred type of file. When there is only type of file in the USB memory , that audio or movie operation screen is displayed and starts to play. When you play a file with limited playing time, the confirmation screen will be displayed before starting to play the file. Confirm the playing time and select [...]

Menu: There are some options available during play- back. Select one of the following that are dis- played on the screen, if necessary. Refer to the following information for each item. ● Movie Playback Switch to the movie playback mode. This item is displayed only when the USB memory contains movie files. The shift selector must be in Park (P) w[...]

Operation keys: T o operate the USB memory , select the desired key displayed on the display screen. ● Pause: Select the key to pause the movie file. T o resume playing the movie file, use the key . ● Play: Select the key to start playing the movie file or resume the movie file if it has been paused. ● Stop: Select the key to stop playing the[...]

● 10 Key Search Select the “10 Key Search” key to open the number entry screen. Input the number you want to search for and the specified file or folder will be played. ● Display Adjust the image quality of the screen. ● DRC DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound t[...]

Audio main operation AUX button: Place the ignition switch in the ACC or ON position and press the AUX button repeatedly until the iPod 姞 mode is displayed on the screen. If another audio source is playing and the iPod 姞 is connected, press the AUX button repeatedly to switch to the iPod 姞 mode. If the vehicle audio system is turned off while[...]

iP od 姞 * PLA YER OPERA TION WITH NA VIGA TION S Y STEM (if so equipped) Connecting iPod 姞 T o connect an iPod 姞 to the vehicle so that the iP od 姞 can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Open the protective cover 䊊 1 on the USB jack in the center console. Then c[...]

Interface: The interface for iPod 姞 operation shown on the vehicle center display is similar to the iPod 姞 in- terface. Use the touchscreen to control your fa- vorite settings. The following items can be chosen from the menu list screen. For further information about each item, see the iPod 姞 Owner’s Manual. ● Now Playing ● Playlists ?[...]

When the or side of the seeking button is pressed for more than 1.5 seconds while the iP od 姞 is playing, the iP od 姞 will play while fast forwarding or rewinding. When the button is released, the iPod 姞 will return to the normal play speed. Scrolling menus: While navigating long lists of artists, albums or songs in the music menu, it is poss[...]

Recording CDs 1. Operate the audio system to play a CD. For information on playing CDs, see “Compact Disc (CD) player operation” in this section. 2. T ouch the “Start REC” key. REC CD ap- pears on the screen. NO TE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” key is selected. ● Individual t[...]

Playing recorded songs Select the Music Box audio system by using one of the following methods: ● Press the SOURCE select switch on the steering wheel. For information, see “Steering wheel switch for audio control” in this section. ● Press the DISC·AUX button repeatedly until the center display changes to the Music Box mode. ● Give voice[...]

Music Box menu There are some options available during play- back. Select the “Menu” key, then select one of the following that are displayed on the screen, if necessary . Refer to the following information for each item: ● Now Playing Lists the tracks stored in the Music Box system. T ouch the name of the track to begin playing that track. ?[...]

● My Playlists Displays the playlists stored in the system. T ouch the “Edit” key next to a playlist to perform the following operations for that playlist: – Add Current Song - adds the song cur- rently playing to the playlist. – Add Songs by Album - adds songs to the playlist by album. – Add Songs by Artist - adds songs to the playlist[...]

● Edit Music Information Edits the information of the songs in the Music Library . – Edit Information of Current Song – Edit Information by Album – Update Gracenote from USB Device – T ransfer Missing Titles to USB – Update Gracenote from HDD The “T ransfer Missing Titles to USB” and “Up- date Gracenote from HDD” options can be [...]

● Delete Songs from Music Box: Delete music data stored on the hard drive. ● Recording Quality: Set the recording quality of 105 kbps or 132 kbps. The default is set to 132 kbps. ● CDDB V ersion: Shows the version of CDDB (Compact Disc Data Base) . Gracenote 姞 NO TE: ● The information contained in the Gracenote 姞 Database is not fully g[...]

Y ou agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only . Y ou agree not to assign, copy, transfer or transmit the Gracenote Software or any Gracenote Data to any third party. Y OU AGREE NOT TO USE OR EXPL OIT GRACENO TE DA T A , THE GRACENO TE SOFTWARE, OR GRACENO TE [...]

BLUET OO TH 姞 STREAMING AUDIO (if so equipped) If you have a compatible Bluetooth 姞 audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers. Connecting Bluetooth 姞 audio T o connect your Bluetooth 姞 audio devi[...]

5. Enter a PIN of your choice. It will be needed by your Bluetooth 姞 audio device to com- plete the connection process. See the Bluetooth 姞 audio device’s owner’s manual for more information. Audio main operation T o switch to the Bluetooth 姞 audio mode, press the DISC-AUX button repeatedly until the Bluetooth 姞 audio mode is displayed [...]

4. Select the “ Audio Player” key. 5. A list of the connected Bluetooth 姞 audio players is displayed. Select the name of the device you wish to edit. 6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth 姞 audio player. Select the “Edit” key to edit the de[...]

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a [...]

1. Source select and Power on switch 2. T uning switch 3. V olume control switch 1. Source select and Power on switch 2. Menu control switch/ENTER button 3. V olume control switch STEERING WHEEL SWIT CH FOR AUDIO CONTROL (if so equipped) POWER on switch With the ignition switch in the ACC or ON posi- tion, push the SOURCE switch to turn the audio s[...]

T ype C Switch: AM → FM1 → FM2 → XM1 → XM2 → XM3 (satellite radio, if so equipped) → CD/DVD* → Music Box** → USB/iPod 姞 * → Bluetooth 姞 Au- dio* → AUX* → AM. * These modes are only available when compat- ible media storage is inserted into the device. ** This mode is only available when music has been downloaded into the M[...]

DVD: ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. ● Tilt up/down for more than 1.5 seconds to increase or decrease the title number. ● Press the ENTER button to select an item from the DVD display . ● When the transparent operation menu ap- pears, the switch will control the menu. USB: ● Tilt up/down [...]

Window antenna The antenna pattern is printed inside the rear window . CAUTION ● Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor recep- tion or noise. ● When cleaning the inside of the rear window, be careful not to scratch or damage the rear window antenna. Lightly wipe along the ante[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is pushed to the ON position with the previously connected cellular phone turned on and carried in the ve- hicle. Y ou can connect up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth 姞 Hands-Free[...]

IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all re- quirements of the Canadian Interference- Causi[...]

● In most cases you can interrupt the voice feedback to speak the next command by pressing the button on the steering wheel. ● T o use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press the button and after the tone say , “Call Redial.” NO TE: The combined command of Ca[...]

CONTROL BUTT ONS The control buttons for the Bluetooth 姞 Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incom- ing call. Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” i[...]

NO TE: Y ou must press the button within 5 seconds to change the language. 5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed. Connecting procedure NO TE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle st[...]

four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Dialing” . See “How to say num- bers” in this section for more information. 5. When you have finished speaking the phone number, the system repeats it back and an- nounces the available commands. 6. Say: “Dial” 䊊 D . The system acknowledg[...]

(Speak Digits) 䊊 B When prompted by the system, say the number you wish to call. Refer to “How to say numbers” and “Making a call by entering a phone number” in this section for more details. “Special Number” 䊊 C For dialing more than 10 digits or any special characters, say “Special Number” . When the system acknowledges the co[...]

“Phonebook” (phones without automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “T ransfer Entry” 䊊 A “Delete Entry” 䊊 B “List Names” 䊊 C For phones that do not support automatic down- load of the phonebook (PBAP Bluetooth 姞 [...]

“Phonebook” (phones with automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “List Names” 䊊 A “T ransfer Entry” 䊊 B “Delete Entry” 䊊 C “Record Name” 䊊 D For phones that support automatic download of the phonebook (PBAP Bl[...]

The system repeats the number and prompts you for the next command. When you have finished entering numbers or transferring an entry, choose “Store.” The system confirms the name, location and number. “Delete Entry” 䊊 C Use the Delete Entry command to erase one entry from the phonebook. After the system rec- ognizes the command, speak the[...]

SPEAKER ADAPT A TION (SA) MODE Speaker Adaptation allows up to two out-of- dialect users to train the system to improve rec- ognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different speaker adaptation model for each connecte[...]

● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five one ● record name ● four three pause two nine pause zero ● delete redial number ● phonebook list names ● call eight oh five four one ● corr[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN Voice Recognition system supports the phone co[...]

REGULA T ORY INFORMA TION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device ma[...]

2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth 姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies accor[...]

VEHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally down[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. Voicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry, select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone?[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the button on the steering wheel. The “Phone” screen will appear on the display . 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handset Phonebook: Select the name from an entry s[...]

Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display. b. Press and hold the phone button on the steering wheel switches. DURING A CALL There are some options available [...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display. ● Push the switch on the steering wheel. PHONE SETTINGS T o set up the Bluetooth 姞 Hands-Free Phone System to your preferred settings, press the SET - TING button on the instrument panel and select [...]

V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automatically after several rings. When the “V ehicle Ringtone” op- tion is turned on, a specific ringtone that is differ- ent from the cellul[...]

CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if reception between callers is unclear. ● Incoming call — adjusting this setting allows you to hear a difference in volume. ● Outgoing call — adjusting this setting allows the person you are talking with to hear a difference in volume. T o access the settings, p[...]

T o improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. See “Speaker Adaptation Function” in this section. Otherwise, it is recommended that Alter- nate Command Mode be turned off and Standard Mode be used for the best recognition perfor- mance. While usin[...]

Available items: ● Getting Started Describes the basics of how to operate the V oice Recognition system. ● Let’s Practice Initiates a practice session that demon- strates how to improve voice recognition by the system. ● Using the Address Book T utorial for using the Address Book ● Finding a Street Address T utorial for entering a destina[...]

Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and receive feedback on the volume, speed and timing of your speech. T o initiate a practice session, access the User Guide and select the “Let’s Practice” key. Follow the on-screen prompts until the session is com- plete. After the session is [...]

V oice recognition settings The available settings of the NISSAN Voice Rec- ognition system are described. 1. Select “Voice Recognition”. 2. Y ou can confirm the page by scrolling the screen. USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few second[...]

2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is comp[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays Vehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Chan[...]

Information Command: COMMAND ACTION T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio system mode to FM radio. XM Changes the audio system mode to satellite radio. Music Box Changes the audio[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number”. 5. Say “800”. 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662”. LHA1334 LHA1335 LHA1336 Monitor, climate, audio, phone and voice recognition systems 4-119[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200”. 10. The system announces, “Dial or Change Number?” 11. Say “Dial”. 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the a[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone”. 4. Say “International Call”. LHA0768 LHA1333 LHA1334 Monitor, climate, audio, phon[...]

5. Say “011811112223333”. 6. Say “Dial”. 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN VOICE RECOGNITION AL TERNA TE COMMAND MODE The Alternate Command Mode enable[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display. 3. Select the “Voice Recognition” key. 4. Select the “ Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode. 6.[...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help” , you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. NO TE: Y ou can skip steps 1 th[...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a smaller number. Zoom Out <1 to 13> Changes the map scale to a larger number. Guidance Voice ON/OFF Turns the navigation voice guidance on or off. Guide Voice Repeat Repeats the la[...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “User Guide” key. 5. Selec[...]

Before starting T o get the best performance from NISSAN Voice Recognition, observe the following: ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing the voice commands cor- rectly . ● When the cli[...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This setting enables control of the Audio and Climate Control systems in addi- tion to additional commands [...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The V oice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also disp[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 3 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover ....................5 - 5 Off-road recovery ...........................[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

c . Y ou notice a change in the sound of the exhaust system. d. Y ou have had an accident involving damage to the exhaust system, un- derbody, or rear of the vehicle. THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures [...]

mately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including th[...]

● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing ti[...]

avoid driving when tired. Never drive when under the influence of alcohol or drugs (including pre- scription or over-the-counter drugs which may cause drowsiness) . Always wear your seat belt as outlined in the “Safety – Seats, seat belts and supplemental restraint system” section of this manual, and also instruct your passengers to do so. Se[...]

2. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 3. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake pedal to gradually stop the vehicle. [...]

When the ignition switch is pushed without de- pressing the brake pedal, the ignition switch po- sition will illuminate as follows: With the shift selector in the P (Park) position push the switch ● once to change to ACC. ● two times to change to ON. ● three times to return to off. If the ignition switch was repeatedly pushed on and off over [...]

CAUTION Do not leave the vehicle with the ignition switch in ACC or ON positions when the Hybrid System is off for an extended pe- riod. This can discharge the battery. EMERGENC Y ENGINE SHUT OFF T o shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consec[...]

CAUTION ● Never place anything except the Intelli- gent Key in the Intelligent Key port. Do- ing so may cause damage to the equipment. ● Make sure the Intelligent Key is in the correct direction when inserting it to the Intelligent Key port. The engine may not start if it is in the wrong direction. ● Remove the Intelligent Key from the Intell[...]

1. Apply the parking brake. 2. Move the shift selector to P (Park) . The Hybrid System is designed not to operate if the shift selector is not in the P (Park) position. 3. Place the ignition switch in the ON position. Depress the brake pedal and push the igni- tion switch to start the Hybrid System. The READ Y light will illuminate on the meter. NO[...]

CAUTION When stopping the vehicle on an uphill grade, do not hold the vehicle by depress- ing the accelerator pedal. The foot brake should be used for this purpose. The eCVT in your vehicle is electronically con- trolled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the follow[...]

WARNING Apply the parking brake if the shift selec- tor is in any position while the READY light is OFF . Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. P (Park) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehi[...]

Shift lock release If the battery charge is low or discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed and the shift selector button pushed. It will be necessary to jump start or have your battery charged, see “Jump starting” in the “In case of emergency” section. Contact your NISSA[...]

T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. 1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch PRECAU[...]

T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. The SET indicator light in the instrument panel comes on. T ake your foot off the accelerator pedal. Y our vehicle maintains the set speed. ● T o pass another vehicle, depress the ac- celerator pedal. When you release the pedal, the vehi[...]

CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Do not accelerate at full throttle in any gear. ●[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in[...]

WARNING ● If the Hybrid System is not in the READ Y mode or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the Hybrid System in the READ Y mode, there will be no power assist for the steering. Y ou will still have control [...]

Hydraulic system The brake system has separate hydraulic circuits. If one circuit malfunctions, you will still have brak - ing at other wheels. However, the brake pedal will have to be de- pressed harder and your stopping distance will increase. The brake system warning light will also come on. Brake actuator The brake actuator uses a pump to provi[...]

ANTI-L OCK BRAKING S Y STEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remem- ber that stopping distances on slippery surfaces will be longer than o[...]

Normal operation The ABS operates at speeds abov e4-6M P H( 7 - 10 km/h) . The speed varies according to road conditions. When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may hear a noise from under the ho[...]

The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and ve- hicle motion. Under certain driving situations, the system will control braking and engine output to help keep the vehicle on its steered path. ● When the V ehicle Dynamic Control (VDC) system is operating, the SLIP indicator in the instrument panel bl[...]

FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the Intelligent Key . ANTI-FREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) [...]

● Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brake while on the ice, and avoid any sudden steering maneuvers. ● Do not use the cruise control on slip- pery roads. ● Snow can trap dangerous exhaust gases under your [...]

MEMO 5-26 Starting and driving[...]

6 In case of emergency Emergency engine shut off .........................6 - 2 Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 3 Hybrid system stops operating while driving ..........6 - 7 V ehicle does not start ................[...]

T o shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times, or – Push and hold the push-button ignition switch for more than 2 seconds. TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring Syst[...]

● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CHANGING A FLA T TIRE If you have a flat tire, follow the instructions be- low: Stopping the vehicle [...]

Getting the spare tire and tools Open the trunk. Lift the trunk floor carpeting. Remove the jack 䊊 1 and wheel nut wrench 䊊 2 from the holder. Lift the molded tool holder to remove the spare tire. T urn the clamp to remove the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is suppor[...]

● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe[...]

Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger [...]

WARNING ● If the Hybrid System stops operating while driving, the power assist for the brakes and steering will not work. Brak - ing and steering will be harder. ● If the Hybrid System stops operating while driving, do not open any door until the vehicle comes to a complete stop. Opening a door will lock the steering wheel. This may cause the d[...]

T o start the Hybrid System with a booster battery, the instructions and precautions below must be followed. WARNING ● The engine may start at any time with- out warning when the ignition is on and the Hybrid System is in the READ Y mode. When Jump starting keep your hands, clothing, hair and tools away from fans, belts and any other parts that c[...]

1. Locate the fusible link box behind the engine air cleaner. 2. Push the tab in and lift up 䊊 A to remove the lid and expose the remote positive battery terminal 䊊 B . 3. If the booster battery is in another vehicle 䊊 F , position the two vehicles, 䊊 E and 䊊 F ,t o bring their batteries near each other. Do not allow the two vehicles to t[...]

8. Hold down the brake pedal and press the ST ART button. The vehicle instruments and gauges will light up, and the green ⬙ READ Y ⬙ light will come ON. CAUTION If the green READ Y light does not come on, press the ST ART button to turn the Hybrid System OFF. Carefully disconnect the negative cable then the positive cable. Have vehicle taken to[...]

3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn the Hybrid System off.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is coming from the en- gine and/or inverter, stand[...]

For information about towing your vehicle behind a recreational vehicle (RV) , refer to “Flat towing” in the “T echnical and consumer information” sec- tion of this manual. T OWING RECOMMENDED B Y NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as il[...]

WARNING If your vehicle needs to be towed, do it with the front wheels raised. If the front wheels are on the ground when towing, the traction motor may generate electric- ity. This may damage the Hybrid System components and cause a fire. CAUTION ● Never tow this vehicle with the front wheels on the ground or four wheels on the ground (forward o[...]

● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle. ● Route recovery devices so they do not touch any part of the veh[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clean the u[...]

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME PARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSIN[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Do not[...]

● Use only genuine NISSAN floor mats specifically designed for use in your ve- hicle model. See your NISSAN dealer for more information. ● Properly position the mats in the floor- well using the floor mat positioning aid. See ⴖ Floor mat positioning aid ⴖ in this section. The use of genuine NISSAN floor mats can ex- tend the life of your ve[...]

MOST COMMON F ACT ORS CONTRIBUTING T O VEHICLE CORROSION ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coat- ings caused by gravel and stone chips or minor traffic accidents. ENVIRONMENT AL F ACT ORS INFLUENCE THE RA TE OF CORROSION Moisture Acc[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 7 Engine cooling system ..........[...]

Wheels and tires ................................. 8-32 Tire pressure .................................. 8-32 Tire labeling ................................... 8-35 T ypes of tires .................................. 8-38 Tire chains .................................... 8-39 Changing wheels and tires ..................... 8-40[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money. However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make [...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Whe[...]

Steering wheel Check for changes in the steer- ing system, such as excessive freeplay, hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly. Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak. Windshield defroster Check[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● This vehicle has high voltage DC and AC systems as well as a 12-volt system. DC and AC high voltage is v[...]

● On gasoline engine models, the fuel filter or fuel lines should be serviced by a NISSAN dealer because the fuel lines are under high pressure even when the engine is off. CAUTION ● Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improper[...]

1. Brake fluid reservoir 2. Engine oil filler cap 3. Air cleaner 4. Fuse/Fusible link box/Jump-start location 5. Fuse box 6. Inverter coolant reservoir 7. Engine oil dipstick 8. Radiator cap 9. Drive belt location 10. Engine coolant reservoir 11. Windshield-washer fluid reservoir LDI0577 ENGINE COMP ARTMENT CHECK LOCA TIONS Maintenance and do-it-yo[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Engine Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cool- ing system additives are not necessary. WARNING ● Never remove th[...]

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine and inverter are cold. If the cool- ant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the reservoir is empty, check the coolant level in the radiator when the en- gine is cold. If there is insufficient coolant in the radiator, fill [...]

The inverter cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution con- tains rust and corrosion inhibitors. Additional in- verter cooling system additives are not neces- sary . WARN[...]

CHANGING INVERTER COOLANT A NISSAN dealer can change the inverter cool- ant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in inverter overheating. WARNING ● T o avoid the danger of being scalded, never change the coolant when the in- verter is hot. ● Never remove the cap when the inverter is hot[...]

CAUTION Oil level should be checked regularly. Op- erating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the vehicle and let it idle until it reaches operating temperature, then turn it [...]

6. Clean and reinstall the drain plug and a new washer. Securely tighten the drain plug with a wrench. Do not use excessive force. Drain plug tightening torque: 22 - 29 ft-lb (29 - 39 N·m) 7. Refill engine with recommended oil through the oil filler opening, then install the oil filler cap securely . See “Capacities and recommended fuel/lubrican[...]

CAUTION ● Use only Genuine NISSAN Matic W ATF . Do not mix with other fluids. ● Using transmission fluid other than Genuine NISSAN Matic W A TF will dam- age the transmission, which is not cov- ered by the NISSAN new vehicle limited warranty. When checking or replacement is required, we recommend your NISSAN dealer for servicing. For further br[...]

WINDSHIELD-W ASHER FLUID RESERVOIR Fill the windshield-washer fluid reservoir periodi- cally . Add windshield-washer fluid when the low windshield-washer fluid warning light comes on. T o fill the windshield-washer fluid reservoir, lift the cap off the reservoir and pour the windshield- washer fluid into the reservoir opening. Add a washer solvent [...]

● The Hybrid vehicle uses a special 12- volt battery. If the 12-volt battery needs to be replaced, use a battery of the same design. Using the wrong battery can cause hydrogen gas to build up in the vehicle, which could lead to an ex- plosion and personal injury. ● When working on or near a battery, al- ways wear suitable eye protection and rem[...]

REPLACING SPARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in the “NISSAN Service and Maintenance Guide”. Do not service iridium-tipped spark plugs by cleaning or regap- ping. ●[...]

WARNING ● Operating the engine with the air cleaner removed can cause you or oth- ers to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the a[...]

6. Return the wiper to its original position and release it until it has made contact with the windshield. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arms may be dam- aged from wind pres[...]

Proper brake inspection intervals should be followed. For more information regarding brake inspections, see the appropriate mainte- nance schedule information in the “NISSAN Ser- vice and Maintenance Guide” . T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compa[...]

ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Locate the[...]

P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Pull the fuse box cover to rem[...]

CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY™ T ype B LDI0456 LDI2001 BA TTERY REPLACEMENT Maintenance and do-it-yourself 8-23[...]

Replace the battery in the Intelligent Key as fol- lows: 1. Remove the mechanical key from the Intelli- gent Key . 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one. Recommended battery: CR2032 or[...]

HEADLIGHTS Replacing the halogen headlight bulb The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. Be- cause the headlight assembly must be removed from the vehicle for bulb replacement, see your NISSAN dealer. CAUTION ● Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary,[...]

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb * 1 Headlight assembly Low (Halogen) 55 H11 High 65 H9 Park 5 WY5W Side marker 5 WY5W Park/T urn 8/27 3457AK Step light — 194 Rear combination light T ail/Stop 8/27 3157KX T urn 27 3156 Backup (reversing) 8 921 Side marker 5 168 License plate light 5 W5W High-mounted stop light Inside 18 921 Spoi[...]

1. Rear map light 2. Front map light 3. Step light 4. Headlamp assembly 5. High-mount stoplight (if so equipped) 6. T runk light 7. Spoiler mounted stoplight (if so equipped) 8. Rear combination light 9. License plate light WDI0722 Maintenance and do-it-yourself 8-27[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the light housing. Use a cloth 䊊 1 to protect the light housing. WDI0263 V anity mirror light WDI0340 Step light LDI0341 8-28 Mainte[...]

Use a cloth to protect the light housing. Use a cloth 䊊 1 to protect the light housing. Front map light WDI0723 Personal light WDI0585 High-mounted stoplight (rear window) WDI0320 Maintenance and do-it-yourself 8-29[...]

CAUTION Never force the covers into place because the hinge pins can be damaged. Follow the removal and installation instructions to prevent inoperability of the covers. REMOVING COVERS FROM REAR P ARCEL SHELF Remove the top tether anchor cover as follows: 1. Lift the cover to the full open position. T runk light WDI0343 LDI2009 UPPER TETHER ANCHOR[...]

2. Rotate the cover in the direction shown, disengaging the hinge at 䊊 1 and slide the second pin from the hinge 䊊 2 and remove the cover. INST ALLING COVERS T O REAR P ARCEL SHELF CAUTION Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break. Install the top tether anchor cover as follows[...]

3. Close the cover. If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light i[...]

Incorrect tire pressure, including un- der inflation, may adversely affect tire life and vehicle handling. WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross Vehicle Weight Rating (GVWR) is located on the F .M .V .S.S./C .M.V.S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See “Vehicle load- ing information” in the “T echnical and consumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factor[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Only certain SAE class “S” tire chains can be used on this vehicle. Using the wrong Class “S” chains on this vehicle will cause damage to the vehicle. If you plan to use tire chain[...]

CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km) . See “Flat tire” in the “In case of emer- gency” section of this manual for tire re- placing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 83 ft-lb ([...]

● The original tires have built-in tread wear indicators. When the wear indicators are visible, the tire(s) should be replaced. ● Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician because some tire damage may not be ob- vious. Replace the tires as neces- sary to prevent tire fail[...]

● Do not install a damaged or deformed wheel or tire even if it has been re- paired. Such wheels or tires could have structural damage and could fail with- out warning. ● The use of retread tires is not recommended. ● For additional information regarding tires, refer to “Important Tire Safety In- formation” (US) or “Tire Safety Informa-[...]

● Tire tread of the TEMPORAR Y USE ONL Y spare tire will wear at a faster rate than the standard tire. Replace the spare tire as soon as the tread wear indicators appear. ● Do not use the spare tire on other vehicles. ● Do not use more than one spare tire at the same time. ● Do not tow a trailer when the TEMPO- RAR Y USE ONL Y spare tire is[...]

MEMO 8-44 Maintenance and do-it-yourself[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ...............................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.[...]

FUEL RECOMMENDA TION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be[...]

E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) . Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the a[...]

ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improv[...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model QR25DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder in-line Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) Displacement cu in (cm 3 ) 151.82 (2,488) Firing order 1–3–4–2 Idle speed eCVT (in “N” position) No adjustment is necessary. Ignition timing (degree B.T.D.C. at idle speed) CO % at idle Spark plug DILKAR[...]

WHEELS AND TIRES Wheel type Size Offset in (mm) Aluminum 16 x 7J 1.77 (45) T type (Spare) 16 x 4T 1.57 (40) Tire size P215/60R16 Spare tire T135/90R16 DIMENSIONS AND WEIGHTS Overall length in (mm) 190.7 (4,844) Overall width in (mm) 70.7 (1,795) Overall height in (mm) 58.3 (1,481) Front track in (mm) 61.4 (1,560) Rear track in (mm) 61.2 (1,555) Whe[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F .M.V.S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weigh[...]

TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0174 WTI0178 T echnical and consumer information 9-11[...]

Use the following steps to mount the front license plate: 䊊 1 Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.39 in (10 mm) drill. T o avoid damaging the threads behind the finisher, apply only light pressure to the drill. 䊊 2 Mount the license plate bracket using two 10 mm slotted Phillip head screws.[...]

● GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross Vehicle W eight Rat- ing) - maximum total combined weight of the unloaded vehicle, pas- sengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is lo- cated on the F .M.V .S.S./C.M.V .S.S. certificat[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power. V ehicle speed may decrease under [...]

T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighe[...]

T OWING L OAD/SPECIFICA TION T OWING LOAD / SPECIFICA TION UNIT : lb (kg) MAXIMUM TOWING L OAD 1,000 (454) MAXIMUM TONGUE L OAD 100 (45) T OWING SAFETY T railer hitch Choose a proper hitch for your vehicle and trailer. Make sure the trailer hitch is securely attached to the vehicle, to help avoid personal injury or prop- erty damage due to sway cau[...]

● After the hitch is removed, seal the bolt holes to prevent exhaust fumes, water or dust from entering the passenger compartment. ● Regularly check that all trailer hitch mounting bolts are securely mounted. Tire pressures ● When towing a trailer, inflate the ve- hicle tires to the recommended cold tire pressure indicated on the Tire and Loa[...]

● Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle. ● Determine the overall height of the vehicle and trailer so the required clearance is known. T railer towing tips In order to gain skill and an understanding of the vehicle’s behav[...]

● For the first 500 miles (805 km) that you do tow , do not drive over 50 MPH (80 km/h) . ● Have your vehicle serviced more often than at intervals specified in the recommended Maintenance Schedule in the “NISSAN Ser- vice and Maintenance Guide” . ● When making a turn, your trailer wheels will be closer to the inside of the turn than your[...]

CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● DO not tow your vehicle with four wheels on the ground. This may cause serious damage to your vehicle. ● DO NO T tow this vehicle with all four wheels on the ground (flat towing) . Do- ing so WILL DAMAGE internal transmis- sion parts due to lack of transm[...]

WARNING The temperature grade for this tire is es- tablished for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, ei- ther separately or in combination, can cause heat build-up and possible tire failure. Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emiss[...]

Y ou may notify NISSAN by contacting our Consumer Affairs Department, toll-free, at 1-800-NISSAN-1. For Canada If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform T ransport Canada in addition to notifying NISSAN. If T ransport Canada receives complaints, it may o[...]

This vehicle is equipped with an Event Data Re- corder (EDR) . The main purpose of an EDR is to record, in certain crash or near crash-like situa- tions, such as an air bag deployment or hitting a road obstacle, data that will assist in understand- ing how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynami[...]

For Canada T o purchase a copy of a genuine NISSAN Ser- vice Manual or Owner’s Manual please contact your nearest NISSAN dealer. For the phone num- ber and location of a NISSAN dealer in your area call the NISSAN Information Center at 1-800- 387-0122 and a bilingual NISSAN representa- tive will assist you. Also available are genuine NISSAN Servic[...]

MEMO 9-28 T echnical and consumer information[...]

10 Index 12-volt battery ................ .8-15 A Air bag (See supplemental restraint system) .................... .1-35 Air bag system Front (See supplemental front impact air bag system) .............. .1-43 Air bag warning light .......... .1-50, 2-15 Air cleaner housing filter ........... .8-17 Air conditioner Air conditioner service ..........[...]

T op tether strap anchor point locations . .1-22 Child safety rear door lock ........... .3-6 Chimes, audible reminders .......... .2-17 Cleaning exterior and interior .......... .7-2 Clock .................. .4-38, 4-43 (models with navigation system) ...... .4-8 (models without navigation system) . . . .4-38 Clock set ................. .4-8, 4-38[...]

F .M.V .S.S. certification label .......... .9-10 Front air bag system (See supplemental restraint system) ..... .1-43 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fuel economy ............... .5-17 Fuel-filler door and cap .......... .3-20 Fuel-filler door lock opener lever ..... .3-20[...]

L Labels Air conditioner specification label .... .9-11 C.M.V .S.S. certification label ....... .9-10 Emission control information label .... .9-10 Engine serial number ........... .9-10 F .M.V .S.S. certification label ........ .9-10 Tire and Loading Information label .... .9-11 V ehicle identification number (VIN) plate . .9-9 W arning labels (fo[...]

P Parking Parking brake operation .......... .5-14 Parking/parking on hills .......... .5-18 Personal lights ................. .2-47 Phone, Bluetooth 姞 hands-free system .................. .4-85, 4-99 Power Power door locks .............. .3-5 Power outlet ................ .2-35 Power rear windows ............ .2-42 Power steering system ........[...]

Sunroof (see Moonroof) ............ .2-44 Sun visors ................... .3-23 Supplemental air bag warning light . . .1-50, 2-15 Supplemental front impact air bag system . . .1-43 Supplemental restraint system Information and warning labels ...... .1-49 Precautions on supplemental restraint system ................... .1-35 Supplemental restraint s[...]

Low windshield-washer fluid warning light ..................... .2-25 Passenger air bag and status light .... .1-44 Seat belt warning light ........... .2-14 V ehicle security system .......... .2-27 W arning/indicator lights and audible reminders .................. .2-9 W arning labels (for SRS) ......... .1-49 W arning lights .................. .[...]

RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be us[...]

® 2011 A L T IM A H Y BRID OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2011 N I SSAN AL TI MA HYB R I D H L32-D H L32-D Printing : August 2010 (06) Publication No.: OM0E 0L32U2 Printed in U .S.A. OM1E H L32U0[...]