Nissan Maxima (2010) инструкция обслуживания

® 2010 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2010 N IS SAN MAX I MA A35-D Printing : January 2010 (04) Publication No.: Printed in U .S.A. A35-D OM0E 0A35U1[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and with- ou[...]

CALIFORNIA PERCHLORATE ADVISORY Some vehicle parts, such as lithium batter- ies, may contain perchlorate material. The following advisory is provided: “Perchlorate Material – special handling may apply, See www.dtsc .ca.gov/hazardouswaste/perchlorate.” BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon a[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. T op tether strap anchor (P . 1-35) 2. Adjustable headrest (P . 1-10) 3. Rear seat belts (P . 1-13) 4. Roof-mounted curtain side-impact supplemental air bag (P . 1-39) 5. Front seat-mounted side-impact supplemental air bags (P . 1-39) 6. Head Restraints (P . 1-7) 7. Front seat belts (P . 1-13) 8. Supplemental front-impact air bags (P . 1-39) 9. [...]

1. Engine hood (P . 3-18) 2. Windshield wiper and washer switch (P . 2-26) 3. Windshield (P . 8-19) 4. Moonroof (if so equipped) (P . 2-45) 5. P ower windows (P . 2-42) 6. Door locks, NISSAN Intelligent K ey™, keys, request button (P . 3-4, 3-2, 3-2, 3-2) 7. Mirrors (P . 3-25) 8. Tire pressure (P . 8-31) 9. Flat tire (P . 6-2) 10. Tire chains (P [...]

1. Rear window defroster switch (P . 2-27) 2. Interior trunk lid release (P . 3-20) 3. T runk lid (P . 3-18) 4. V ehicle loading (P . 9-12) 5. Exterior trunk lid release/request button (P . 3-13) 6. Replacing bulbs (P . 8-29) 7. Fuel-filler cap, fuel recommendation (P . 3-21, P . 9-3) 8. Fuel-filler door (P . 3-21) 9. Child safety rear door locks ([...]

1. Interior trunk access (P . 1-5) 2. Moonroof (if so equipped) (P . 2-45) 3. Sun visors (P . 3-24) 4. Interior lights, illuminated entry (P . 2-50) 5. HomeLink 姞 universal transceiver (if so equipped) (P . 2-53) 6. Interior mirrors (P . 3-25) 7. Glove box (P . 2-39) 8. Cup holders (P . 2-38) 9. Console box (P . 2-40) 10. Front seat (P . 1-2) 11.[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (P . 4-114, 4-118) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-39, P . 2-33) 6. Security indicator light (P . 2-24) 7. Cruise con[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-36) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-35) T runk lid release switch (P . 3-20) Rear control cancel switch (if so equipped) (P . 2-49) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated[...]

1. P ower steering fluid reservoir (P . 8-12) 2. Engine oil filler cap (P . 8-9) 3. Brake fluid reservoir (P . 8-13) 4. Air cleaner (P . 8-17) 5. Fuse block (P . 8-21) 6. Battery (P . 8-14) 7. Fuse/fusible link box (P . 8-21) 8. Engine oil dipstick (P . 8-9) 9. Radiator cap (P . 8-7) 10. Drive belt location (P . 8-16) 11. Engine coolant reservoir *[...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-11 or Brake warning light 2-11 Charge warning light 2-11 Engine oil pressure warning light 2-12 Low tire pressure warning light 2-12 Master warning light 2-13 W arning light Name Page NISSAN Intelligent K ey™ warning light 2-13 Seat belt warning light and chime 2-13 Supp[...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front power seat adjustment .....................1 - 3 Folding rear seat (if so equipped) .................1 - 5 Head restraints .................................1 - 7 Adjustable headrest (if so equipped) ............. 1-10 Seat be[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

FRONT POWER SEAT ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery . See “ Automatic drive posi[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down (manual) or move the switch forward or backward (power) to adjust the seat lumbar area.[...]

Thigh extension (driver’s side only , if so equipped) Pull up and hold the lever to extend the front portion to the desired position. FOLDING REAR SEAT (if so equipped) Interior trunk access For models without a rear center console, the trunk can be accessed from the passenger side of the rear seat for loading and unloading, as shown. 䊊 1 Push [...]

● When returning the seatbacks to the upright position, be certain they are completely secured in the latched posi- tion. If they are not completely secured, passengers may be injured in an acci- dent or sudden stop. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they c[...]

Center armrest Pull the armrest down until it is horizontal. HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses th[...]

Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. LRS0887 WRS0134 LRS0888 1-8 Safety—Seats, seat belts and supplemental restraint system[...]

T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the veh[...]

Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occu- pant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries[...]

Components 1. Adjustable headrest 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the headrest so the center is level with the center of the seat occupant’s ears. T o raise the headrest, pull it up. LRS0887 WRS0134 LRS0888 Safety—Seats, seat belts and supplemental restraint system 1-11[...]

T o lower, push and hold the lock knob and push the headrest down. Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly so it is not loose in the vehicle. 5. Reinstall and properl[...]

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up e[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulle[...]

Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly .[...]

WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chanc[...]

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way [...]

LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) . A booster seat should be used to obtain proper seat belt fit. NISSAN recom[...]

WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions [...]

This vehicle is equipped with a universal child restraint anchor system, referred to as the LA T CH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors. For details, see “LA T CH (Lower Anchors and T ethers for CHildren) sys- tem” later i[...]

LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA T CH system compatible child restraints only at the locations shown in the illustration. – Do not[...]

When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts. See “In- stalling top tether str[...]

2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the cente[...]

4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in[...]

WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the opera- tion of[...]

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slac[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the headrest to obtain the correct child restraint fit. If the headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is removed. See “ Adjustable headrest” in this section for h[...]

7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 6. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR m[...]

3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anc[...]

6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. 8. After attaching the child re[...]

10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see ⬙ Front passenger air bag and status light ⬙ in this section. Move the child restraint to another seating position. Have the system ch[...]

BOOSTER SEATS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: – Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach. – Make sure[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. P osition the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s in- structions. 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adj[...]

7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light may or may not illuminate, depending on the size of the child and the type of booster seat being used. See “Front passenger air bag and status light” later in this section. PRECAUTIONS ON SUPPLE[...]

WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1133 ARS1041 Safety—Seats, seat belts and supplemental restraint system 1-41[...]

ARS1042 ARS1043 ARS1044 1-42 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the fron[...]

WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front s[...]

SSS0159 SSS0162 Safety—Seats, seat belts and supplemental restraint system 1-45[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag modules 6. Crash zone sensor 7. Occupant classification system control unit 8. Seat belt buckle[...]

The NISSAN Advanced Air Bag System has dual stage inflators. It also monitors information from the crash zone sensor, the Air Bag Control Unit (ACU) , seat belt buckle sensors and the occu- pant classification sensor (pattern sensor) . Infla- tor operation is based on the severity of a colli- sion and seat belt usage for the driver. For the front p[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

ger air bag to be automatically turned OFF . For small adults it may be turned OFF , however if the occupant takes his/her weight off the seat cush- ion (for example, by not sitting upright, by sitting on an edge of the seat, or by otherwise being out of position) , this could cause the sensor to turn the air bag OFF . In addition, if the occupant [...]

Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such ob- jects may become dangerous projec- tiles and cause injury if the front air bags inflate. ● Immedia[...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to [...]

● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and cur[...]

when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased within the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is released and a loud noise may be heard. This smoke is not harmful and does [...]

When the ignition switch is placed in the ON or ST ART position, the supplemental air bag warn- ing light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and preten- sioner systems need servicing: ● The supplemental[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-55[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge ...............2 - 5 Fuel gauge ....................................2 [...]

P ower windows ............................... 2-42 Moonroof (if so equipped) ......................... 2-45 Automatic moonroof ........................... 2-45 Dual Panel Moonroof (if so equipped) ............... 2-46 Automatic moonroof ........................... 2-46 Rear Control Cancel Switch (if so equipped) . . . ..... 2-49 Rear power sun sha[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (P . 4-114, 4-118) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-39, P . 2-33) 6. Security indicator light (P . 2-24) 7. Cruise con[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-36) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-35) T runk lid release switch (P . 3-20) Rear control cancel switch (if so equipped) (P . 2-49) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer 䊊 1 records the total distance the vehicle has been driven. The twin trip odometer 䊊 2 records the distance of individual [...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERATURE GAUGE The gauge ind[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition is placed in the OFF position. The low fuel warning light comes on when the amount of fuel in the tank is getting low . Refill t[...]

COMPASS DISPLAY Push the button for about 1 second when the ignition switch is placed in the ON position to toggle the outside temperature and compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading. N: North E: East S: South W: W est If the display reads “C” , calibrate the compass by driv[...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 8 second[...]

1. With the display turned on, press and hold the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) . 3. After completing the circles, the display should return to normal. CAUTION ● Do not install a ski rack,[...]

or Anti-lock Braking System (ABS) warning light Seat belt warning light and chime High beam indicator light (blue) or Brake warning light Supplemental air bag warning light Malfunction Indicator Light (MIL) Charge warning light Continuously V ariable T ransmission (CVT) indi- cator light Security indicator light Engine oil pressure warning light Co[...]

or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning [...]

Engine oil pressure warning light This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dip[...]

WARNING ● If the light does not illuminate with the ignition switch in the ON position, have the vehicle checked by a NISSAN dealer as soon as possible. ● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible.[...]

The seat belt warning light may also illuminate if the front passenger’s seat belt is not fastened when the front passenger’s seat is occupied. For 7 seconds after the ignition switch is placed in the ON position, the system does not activate the warning light for the front passenger. Refer to “Seat belts” in the “Safety—Seats, seat bel[...]

Front passenger air bag status light The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental [...]

The malfunction indicator light may stop blinking and come on steady . Have the vehicle inspected by a NISSAN dealer. Y ou do not need to have your vehicle towed to the dealer. CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and[...]

NISSAN Intelligent K ey™ door buzzer The Intelligent K ey door buzzer sounds if the Intelligent K ey is left inside the vehicle when locking the doors. When the buzzer sounds, be sure to check both the vehicle and the Intelligent K ey. See “NISSAN Intelligent K ey™” in the “Pre- driving checks and adjustments” section. The vehicle infor[...]

Fuel Economy mode The fuel economy mode can be selected to dis- play the instant fuel economy since the last reset. Average speed mode The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset. Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance dri[...]

Range mode The range mode can be selected to give you an estimation of the distance that can be driven before refueling. The range is constantly calcu- lated based on the amount of fuel in the fuel tank and the actual fuel consumption. Exterior T emperature mode The exterior temperature mode can be selected to provide you with the temperature outsi[...]

Alert mode The alert mode allows you to set alerts notifying you of time to rest or icy conditions. The time to rest alert lets you know when you have been traveling for a long time and may need a break. The icy alert notifies you that icy driving condi- tions may exist. Reset mode The reset mode can be selected in any screen that allows for prefer[...]

Options mode The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pressing . Language: English or French Unit: US — mile, °F , MPG Metric — km, °C, L/100 km Dial effects: This changes effects of the indicator needles when ON. The needles in the meter sweep and the ring illumination will be brightened gradually w[...]

V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield washer fluid warning 5. No key warning 6. Parking brake warning 7. Shift P warning 8. Engine start operation indicator 9. NISSAN Intelligent K ey™ insertion indicator 10. NISSAN Intelligent K ey™ removal indi[...]

Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning After the Shift P warning illuminates, the Push warning will illuminate if the ignition switch is placed in the ACC position when the shift selec- tor is moved to the P (Park) position. See “Shift P warning” in [...]

NISSAN Intelligent Key™ insertion indica- tor This indicator illuminates when the Intelligent K ey needs to be inserted into the Intelligent K ey port. (For example, the Intelligent K ey battery is dis- charged.) If this indicator illuminates, insert the Intelligent K ey into the Intelligent Key port in the correct direction. See “Push-button i[...]

ways secure your vehicle even if parking for a brief period. Never leave your Intelligent K ey in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible. Many devices offering additional protection, such as component locks, identification markers, and tracking sy[...]

3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices. Statement related to Section 15 of FCC Rules for NI[...]

NO TE: Y ou can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with navigation system. Refer to “Comfort settings” in the “Monitor, climate, audio, phone and voice recogni- tion systems” section. 䊊 2 Low — continuous low speed operation 䊊 3 High — continuous high speed operation Push the l[...]

NO TE: The top few rows of wires on the rear win- dow are not part of the rear window de- froster system. These wires make up the antenna for the audio system. X ENON HEADLIGHTS (if so equipped) WARNING Ꮨ HIGH VOL TAGE ● When xenon headlights are on, they produce a high voltage. T o prevent an electric shock, never attempt to modify or disassem[...]

HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehic[...]

Autolight system The autolight system allows the headlights to be set so they turn on and off automatically . The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark. ● T urn off all the lights when it is light. ● K eep all the lights on for 45 seconds[...]

Headlight beam select 䊊 1 T o select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 䊊 2 Pull the lever back to select the low beam. 䊊 3 Pulling and releasing the lever flashes the headlight high beams on and off. Battery saver system If the ignition switch is placed in the OFF position [...]

INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the igni- tion switch is in the ON position. The instrument brightness control operates when the headlight control switch is in the AUT O, or position. T urn the control left or right to adjust the bright- ness of the instrument panel lights when driving at night. The instrument [...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine. 2. T urn the control knob to the H (Heat) side or to the C (Cool) side, as desired. The [...]

The front seats are warmed by built-in heaters. The switch is located on the center console. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as lo[...]

NO TE: If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction. The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow , the VDC system red[...]

CAUTION ● The outlet and plug may be hot during or immediately after use. ● The power outlets are not designed for use with a cigarette lighter. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. ● Use power outlets with the engine run- ning to avo[...]

SUNGLASSES HOLDER (if so equipped) T o open the sunglasses holder, push and release. WARNING ● Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasse[...]

T o open the front cup holders, push the cup holder lid. T o close, lower the cup holder lid and push down until it clicks in place. The rear cup holders are located in the fold-down armrest in the rear seat back. T o open the cup holders on the rear fold-down armrest, lift the cup holder lid. T o close, lower the lid. GLOVE BOX Open the glove box [...]

CONSOLE BOX Upper half Pull up on the driver’s side latch to open the upper half of the console box. The upper half of the console box may be used for storage of cellular phones. An access hole is provided at the front of the upper half of the console box for a phone or iP od 姞 cord routing to the power outlet. Lower half Pull up on the lever t[...]

GROCERY HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than 20 lbs (9 kg) to a single grocery hook. CARGO NET (if so equipped) WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden st[...]

T o install a cargo net, attach the net to the retain- ers. T o remove a cargo net, detach the net from the retainers. P OWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ?[...]

Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window, push the switch to the first detent and continue to hold down until the de- sired window position is reached. T o close a window , pull the switch to the first detent and continue to hold up until t[...]

Automatic operation T o fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way . T o stop the window, lift the switch up while the window is opening. T o fully close a window equipped with [...]

AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for about 45 sec- onds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to t[...]

When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up. If the auto-reverse function malfunctions and re- peats opening o[...]

Sliding the moonroof T o slide the moonroof: ● T o fully open the moonroof, push the switch 䊊 1 toward the open position until it reaches the second detent. If the switch 䊊 1 is pushed to the first detent, only the sunshade will open. ● T o fully close the moonroof, push the switch 䊊 2 toward the close position until it reaches the second[...]

CAUTION ● Remove water drops, snow, ice or sand from the moonroof before opening. ● Do not place heavy objects on the moonroof or surrounding area. Sunshade T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position until it reaches the first detent. ● T o fully open the sunshade and the moon- roof [...]

The rear control cancel switch operates when the ignition switch is placed in the ACC or ON posi- tion. The rear control cancel switch is located on the left side of the instrument panel. Pushing the rear control cancel switch to the CANCEL side will deactivate the following switches in the rear center armrest: ● Automatic climate control ● Aud[...]

The interior light has a three-position switch and operates regardless of ignition switch position. ● When the switch is in the ON position 䊊 1 , the front and rear personal lights will illumi- nate, regardless of door position. The light will go off after 30 minutes unless the igni- tion switch is placed in the ON position. ● When the switch[...]

CONSOLE LIGHT The console light 䊊 1 will turn on whenever the parking lights or headlights are illuminated. The console light brightness can be adjusted with the illumination brightness control. FRONT T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with t[...]

REAR T o turn on the rear lights, press and release the switch 䊊 1 . T o turn the rear lights off, press and release the switch 䊊 1 . The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after about 30 minutes if the trunk lid is left open, unless the ignition switch is in t[...]

The HomeLink 姞 Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink 姞 Universal T ransceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity syste[...]

3. Using both hands, simultaneously press and hold both the HomeLink 姞 button you want to program and the hand-held transmitter but- ton. DO NO T release the buttons until step 4 has been completed. 4. Hold down both buttons until the indicator light on the HomeLink 姞 flashes, changing from a “slow blink” to a “rapidly flashing blink” .[...]

NO TE: When programming a garage door opener, etc ., it is advised to unplug the device dur- ing the “cycling” process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINK 姞 UNIVERSAL TRANSCEIVER The HomeLink 姞 Universal T ransceiver (once pro- grammed) may now be used to activate the ga- rage door, etc.[...]

FCC Notice: This device complies with FCC rules part 15 and RSS-210 of Industry Canada. Opera- tion is subject to the following two condi- tions: (1) This device may not cause harmful in- terference and (2) This device must accept any interference that may be received, in- cluding interference that may cause undes- ired operation. This transmitter [...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey™ ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ............................................3 - 4 Locking with key ................................3 - 4 Locking with inside lock knob .[...]

1. T wo Intelligent Keys 2. Mechanical keys with built-in transpon- der chip (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT K EY™ Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey system components and NISSAN V e- hicle Immobilizer System components. Never l[...]

Mechanical key The Intelligent K ey contains the mechanical key, which can be used in case of a discharged bat- tery . T o remove the mechanical key, release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position. The mechanical k[...]

Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key , which contains an electrical transponder, to come into contact with salt water. This could affect system function. When the doors are locked using one of the following methods, the doors can no[...]

Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● T o close the windows, turn the driver’s door key to[...]

Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent K ey in the port and any door open, all doors will lock and unlock automatically . With the Intelligent Key left in the vehicle (not in the Intelligent K ey port) and any door open, all doors will unlock aut[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pushed. The FA A advises the radio waves may affect aircraft navigation and commu[...]

when the vehicle battery is completely dis- charged. Unlocking the steering wheel is impos- sible even if the Intelligent key is inserted into the Intelligent K ey port. Pay special attention that the vehicle battery is not completely discharged. As many as four Intelligent K eys can be regis- tered and used with one vehicle. For information about [...]

OPERATING RANGE The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 . When the Intelligent K ey battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent [...]

● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLI[...]

NO TE: ● Doors lock with the door handle request switch when the ignition switch is placed in the ON position. ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position. ● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical [...]

Unlocking doors 1. Carry the Intelligent K ey. 2. Push the door handle request switch 䊊 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 60 seconds to unlock all doors. If a door handle is pulled while unlocking the doors, that door may not be unlocked. Retur[...]

Opening the trunk lid 1. Push the trunk opener request switch 䊊 A for more than 1 second while carrying the Intel- ligent K ey with you. 2. The trunk will unlatch. A chime will sound 4 times. 3. Raise the trunk lid to open the trunk. Lockout protection T o prevent the Intelligent Key from being acci- dentally locked in the trunk, lockout protecti[...]

CAUTION After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles. Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors. All doors will be locked automatically u[...]

Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. See “Cancel switch” in this section. Using the panic alarm If you are near your vehicle and feel threatened[...]

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey. T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated. T o activate: Press and hold the and buttons for at least 2[...]

Symptom Possible Cause Remedy When pushing the ignition switch to stop the engine The SHIFT P warning appears on the dis- play and the inside warning chime sounds continuously. The shift selector is not in the P (Park) position. Shift the shift selector to the P (Park) position. When opening the driver’s door to get out of the vehicle The inside [...]

䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place. WARNING ● Make sure the hood is compl[...]

OPENER OPERATION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex - haust gas” in the “Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they[...]

SECONDARY TRUNK LID RELEASE T o open the trunk lid from the rear seat: 䊊 1 ● Fold down the center arm rest. ● Insert the mechanical key into the trunk com- partment access lid lock. Fold down the trunk compartment access lid. For more in- formation on the mechanical key , see “NISSAN Intelligent K ey™” in this section. ● Pull the rear[...]

OPENING THE FUEL-FILLER DOOR The fuel-filler door automatically unlocks when all doors are unlocked. 1. Unlock the fuel-filler door using one of the following operations. ● Unlock all doors with the keyfob. ● Unlock all doors with the key . ● Push the power door lock switch to the unlock position. 2. T o open the fuel filler door, push the ri[...]

WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. ● Do not attempt to top off the fuel tank after the fuel pump nozzle shuts of[...]

WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. CAUTION Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driv- er’s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways [...]

MANUAL OPERATION (if so equipped) Tilt and telescopic operation Pull the lock lever 䊊 1 all the way towards you: ● Adjust the steering wheel forward or back - ward in direction 䊊 2 to the desired position. ● Adjust the steering wheel up or down in direction 䊊 3 to the desired position. Lock the steering wheel by releasing the lock lever. [...]

䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do n[...]

T ype A The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. With the ignition switch placed in the ON posi- tion, press the button as described: ● T o turn off the anti-glare feature, press the button. The indicator light will turn off. ● T o turn on the anti-glare feature, press the button again. The i[...]

T o turn on the automatic anti-glare feature again, press: ● the | button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn on. Some vehicles are also equipped with automatic anti-glare outside mirrors. For additional informa- tion, see “ Automatic anti-glare outside mirrors” in [...]

WARNING ● Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. ● Do not adjust the mirrors while driving. Y ou could lose control[...]

Foldable outside mirrors Pull the outside mirror toward the door to fold it. The automatic drive positioner system has two features: ● Memory storage function ● Entry/exit function MEMORY STORAGE FUNCTION T wo positions for the driver’s seat, steering col- umn, and outside mirrors can be stored in the automatic drive positioner memory . Follo[...]

3. Adjust the driver’s seat, steering column, and outside mirrors to the desired positions by manually operating each adjusting switch. For additional information, see “Seats” in the “Safety—Seats, seat belts and supplemental restraint system” section and “Outside mirrors” in this section. During this step, do not place the ignition[...]

The driver’s seat, steering column, and outside mirrors will move to the memorized position with the indicator light blinking, and then the light will stay on for approximately 5 seconds. ENTRY/EXIT FUNCTION This system is designed so that the driver’s seat and automatic operation steering column will au- tomatically move when the shift selecto[...]

MEMO 3-32 Pre-driving checks and adjustments[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the NISSAN controller ...............4 - 5 How to select menus on the screen ..............4 - 6 How to use the ST A TUS button ..................4 - 6 How to use the INF[...]

FM/AM radio with compact disc (CD) changer (if so equipped) ....................... 4-64 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ......................... 4-69 FM/AM/SA T radio with CD/DVD player (if so equipped) ............................... 4-75 Digital V ersatile Disc (DVD) Player Operation (models with Navigation Syste[...]

Phone settings ............................... 4-142 Bluetooth settings ............................ 4-143 Call volume .................................. 4-144 NISSAN V oice Recognition System (if so equipped) ................................. 4-145 NISSAN V oice Recognition Standard Mode ..... 4-145 Using the system ............................. 4[...]

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a[...]

CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water. ● T o clean the display, never use a rough cloth, alcohol,[...]

If you press the BACK button 䊊 4 during setup, the setup will be canceled and/or the display will return to the previous screen. ● Finish setup. In some screens pressing the BACK button 䊊 4 accepts the changes made during setup. HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a[...]

HOW TO USE THE INFO BUTTON Press the INFO button. The display screen shows vehicle information for your convenience. The information shown on the screen should be a guide to determine the condition of the vehicle. See the following for details. Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to[...]

Fuel economy record Press the INFO button, then select the “Fuel Economy” key , then select the “View” key using the NISSAN controller. The average fuel consumption history will be displayed in a graph form along with the average fuel for the previous reset-to-reset period. Maintenance items Press the INFO button and select the “Mainte- n[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

Display settings Select the “Display” key . The Display settings screen will appear. Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the map background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new s[...]

T o turn the screen on: ● Press the SETTING button, select the “Dis- play” key and then select the “Display ON” key . Then set the screen to on by pressing the ENTER button, or ● Hold the OFF button for approxi- mately 2 seconds and the message “resum- ing display” will appear and the “Display ON” key will be automatically turne[...]

Clock The following display will appear after pressing the SETTING button, then selecting the “Clock” key using the NISSAN controller. On-screen Clock: When this item is enabled (indicator light illumi- nated) , a clock is always displayed in the upper right corner of the screen. Clock Format : Choose either the 12h (12-hour) clock display or t[...]

● Newfoundland ● Aleutian ● Hawaii ● Alaska Adjust Clock: T o adjust the time, select the + or - key for the hour until the desired number is reached. Repeat the process for the minutes on the line below . T o accept the changes made and return to the Clocks Settings screen, select the OK key . Comfort & Convenience settings Select the [...]

Auto Interior Illumination: Select to turn on or turn off the illumination of the interior lights when any door is unlocked. Auto Headlights Sensitivity: Select to adjust the sensitivity of the automatic headlights higher (right) or lower (left) . Auto Headlights Off Delay: Select to change the duration of the automatic headlight off timer from 0-,[...]

Language / Units Use the NISSAN controller to select the “Lan- guage / Units” key. Select which setting you want to change using the NISSAN controller. Select Language: Select the “English” key, the “Français” key or the “Español” key to change the language shown on the display . Select Units: Select the “US” (mi, °F , MPG) k[...]

If no operation is done within 10 seconds, the display will return to the previous display . Press and hold the OFF button for more than 2 seconds to turn the display off. Press the button again to turn the display on. 1. Z OOM OUT button* 2. ST A TUS button (P . 4-20) 3. DEST button* 4. ROUTE button* 5. NISSAN controller (P . 4-17) 6. INFO button [...]

9. OFF brightness control button (P . 4-31) 10. - (brightness control) button 11. VOICE button* 12. SETTING button (P . 4-24) 13. MAP button* 14. BACK (previous) button (P . 4-17) 15. Z OOM IN button* *For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. **For information on the PHONE button, see “Bluet[...]

If you press the BACK button 䊊 4 during setup, the setup will be canceled and/or the display will return to the previous screen. ● Finish setup. In some screens, pressing the BACK button 䊊 4 accepts the changes made during setup. For the VOICE button 䊊 5 functions, refer to the separate Navigation System Owner’s Manual. HOW TO USE THE TOU[...]

Adjusting the item: T ouch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item. T ouch the up arrow 䊊 3 to scroll up the page one item at a time, or touch the double up arrow 䊊 4 to scroll up an entire page. T ouch the down arrow 䊊 5 to scroll down the page one item at a time, or touch the double down arrow ?[...]

HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen (for example, press[...]

Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to display Distance to Empty , Average Fuel Economy and Fuel Economy History . Distance to empty (MI or km) The Distance to Empty (D TE) mode provides you with an estimation of the distance that can be driven before refueling. The D TE is constant[...]

Maintenance items Press the INFO button and select the “Mainte- nance” key using the NISSAN controller; the maintenance information will be displayed on the screen. Changing the maintenance interval Select one of the maintenance reminder keys using the NISSAN controller to display the screen to change the maintenance interval. Y ou can choose b[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

HOW TO USE THE SETTING BUTTON When the SETTING button is pressed, the Set- tings screen will appear on the display . Y ou can select and/or adjust several functions, features and modes that are available for your vehicle. Use the NISSAN controller to select each item to be set. Display settings Select the “Display” key . On the screen above, se[...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK[...]

Color theme: Select the “Display” key, then select the “Color Theme” key . The Color Theme select screen will appear. Select the key for the desired color. The appear- ance of the background, arrows and bars will change for all screens accordingly . Y ou can choose a black, blue or red color theme. Clock The following display will appear af[...]

Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the current location, by selecting the correct time zone key to enable that time zone (indicator light will illuminate for that location) . ● Pacific ● Mountain ● Central ● Eastern ● Atlantic ● Newfoundland ● Ha[...]

Comfort settings Select the “Others” key using the NISSAN con- troller, then select the “Comfort” key. The Com- fort settings screen will be displayed. Y ou can set the following operating conditions by selecting the desired item using the NISSAN controller. The indicator light (box at the right of the selected item) alternately turns on an[...]

Slide Driver Seat Back on Exit : Select to turn on or turn off the driver’s seat moving backward for easy exit when the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the driver’s seat moves to the previous position. Return All Setting[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Camera settings Select the “Camera” key. The Camera settings screen will appear. When t[...]

Switch beeps With this option on (indicator light illuminated) , a beep will sound if any control panel button is pressed. OFF BUTTON T o change the display brightness, press the OFF button. Pressing the button again will change the display to the day or the night display . The brightness can then be adjusted using the NISSAN controller. If no oper[...]

Viewing images T o view an image, press the SETTING button and then select the “Image Viewer” key with the NISSAN controller. The Image Viewer screen will be displayed. A list of compatible images on the storage device is displayed on the left side of the screen, while the selected image is displayed on the right side of the screen. T o choose [...]

Slideshow settings While in slideshow mode, select the “Settings” key . The Slideshow Settings screen will be dis- played. The following settings can be accessed: Slideshow speed: T o change the interval of time at which images are changed during a slideshow , select the desired interval key . The indicator light to the right of the interval wi[...]

When the shift selector is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper and may not detect objects close to the bu[...]

V ehicle width guide lines 䊊 5 : Indicate the vehicle width when backing up. Predicted course lines 䊊 6 : Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the shift selector is in the R (Reverse) position and the steering wheel is turned. The predicted course lines will move de- pen[...]

1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen 䊊 A when the shift selector is moved to the R (Reverse) position. 3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver t[...]

Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is further[...]

the hill is the place 䊊 B . Note that any object on the hill is closer than it appears on the monitor. Backing up near a projecting object The predicted course lines 䊊 A do not touch the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course. Backing up behind a projecting object The pos[...]

the position 䊊 A if the object projects over the actual backing up course. HOW TO ADJUST THE SCREEN T o adjust the Display ON/OFF , Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor, push the SETTING button with the RearView Monitor on and select the “Display” key . Select one of the items and change the value by touch[...]

Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. Center LHA1132 Side LHA1133 Rear LHA1134 V ENTS 4-40 Monitor, climate, audio, phone and voice recognition systems[...]

1. T emperature control buttons (driver’s side) 2. AUT O climate control ON button 3. (front defroster) button 4. Air recirculation button 5. MODE (manual air flow control) button 6. T emperature control buttons (passen- ger’s side) 7. DUAL (passenger side temperature control) ON/OFF button 8. Fresh air intake button 9. (fan speed control) dial[...]

AUTOMATIC OPERATION Cooling and/or dehumidified heating (AUT O) This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically . 1. Push the AUT O button on. (The indicator on the button will illuminate and AUT O will be displayed.) 2. Oper[...]

The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot out- let mode. Fresh air intake Push the fresh air intake button to draw outside air into the passenger compartment. The indicator light on the button will come on. Automatic intake air control In the AUT O mode, the i[...]

1. T emperature control dial (driver’s side)/ AUT O (automatic) climate control ON button 2. A/C (air conditioner) ON/OFF button 3. Air recirculation button 4. Fresh air intake button 5. MODE (manual air flow control) button 6. T emperature control buttons (passen- ger’s side)/DUAL (passenger’s side temperature control) ON/OFF button 7. (rear[...]

AUTOMATIC OPERATION Cooling and/or dehumidified heating (AUT O) This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically . 1. Push the AUT O button on. (The indicator on the button will illuminate and AUT O will be displayed.) 2. T ur[...]

The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot out- let mode. Fresh air intake Push the fresh air intake button to draw outside air into the passenger compartment. The indicator light on the button will come on. Automatic intake air control In the AUT O mode, the i[...]

The rear seat passengers can adjust the climate control system using the climate controls in the rear armrest panel. 1. AUT O button 2. button 3. switch For information on canceling the rear seat con- troller, see “Rear control cancel switch (if so equipped)” in the “Instruments and controls” sec- tion. CONTROLS Automatic control button Pus[...]

The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to [...]

Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteri[...]

Compact disc (CD) player (models without Navigation System) CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality [...]

CD/DVD combination player (models with Navigation System) ● Do not force a disc into the CD/DVD insert slot. This could damage the CD/DVD player. ● During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely. ● The player may skip whil[...]

● Use DVDs with a region code “1” , “ ALL ” or “1 included” for your DVD entertainment system. (The region code 䊊 A is displayed as a small sym- bol printed on the top of the DVD 䊊 B .) This vehicle-installed DVD player cannot play DVDs with a re- gion code other than “1” or “ ALL ”. Copyright and trademark ● The technol[...]

● During cold weather or rainy days, the player may malfunction due to the humidity . If this occurs, remove the USB memory stick and dehumidify or ventilate the player com- pletely . ● The player sometimes cannot function when the passenger compartment temperature is extremely high. Decrease the temperature before use. ● Do not leave the USB[...]

● Do not place the Bluetooth 姞 audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth 姞 module to prevent tone quality degradation and wireless con- nection disruption. ● While an audio device is connected through the Bluetooth 姞 wireless connection, the bat- tery power of the device may discharge quicker th[...]

Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software[...]

Specification chart : Supported media CD, CD-R, CD-RW , USB 2.0 Supported file systems CD, CD-R, CD-RW , ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista 姞 operating system-based computer) are not supported. UDF Bridge (UDF 1.0[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista ?[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th[...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX 姞 codec owned by Div , Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – A VI stands for Audio Video Interleave. It is standard file format originated by Mi- crosoft Corporation. A .divx encoded file can be sa[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using t[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station and CD select (1 - 6) buttons 4. L OAD CD button 5. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade, Balance, SSV (if so equipped) , and Beep) 6. AUX IN jack 7. AUX button 8. TRACK button 9. SEEK/CA T button 10. DISC button 11. RPT/RDM button 12. SCAN button 13. AM·FM button 14. DIS[...]

AUDIO control knob (Bass, T reble, Fade, Balance and Beep) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Fade → Balance → Beep ON/OFF → Bass T o adjust Bass, T reble, Fade and Balance, press the AUDIO control knob until the desired mode appears on the display . T urn the TUNE/FOLDER knob to adjust Bass and[...]

● Artist name displays the name of the artist of the song playing. ● Album title displays the title of the album of the song playing. FM/AM radio operation FM/AM band select : Pressing the AM·FM button will change the band as follows: AM → FM1 → FM2 → AM When the AM·FM button is pressed while the ignition switch is in the ACC or ON posi[...]

T o insert 6 CDs to the CD changer, press the L OAD button for more than 1.5 seconds. The slot numbers (1 – 6) will illuminate on the display when CDs are loaded into the changer. DISC button: When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will turn on and the compact disc will start to play . When the[...]

SCAN button: While listening to a CD, press the SCAN button to preview the first 10 seconds of each track on the CD playing. Pressing the SCAN button again during this 10 second period stops the scan and the CD remains on that track. CD EJECT: Current/Selected disc: ● Press the button, then press the slot number (1 – 6) for the desired disc. Th[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. AUX button* 6. TRACK button 7. SEEK/CA T button 8. DISC button 9. RPT/RDM button 10. SCAN button 11. FM·AM button *No satellite radio reception is available when the AUX button is pressed to ac[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Bal- ance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until t[...]

CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the following text might be able to be displayed by selecting the “T ext” key: ● Folder displays the name of the current folder being accessed. ?[...]

When the AUX button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed ON. *When the AUX button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and ant[...]

If the radio is already operating, it will automati- cally turn off and the compact disc will play . If the system has been turned off while the com- pact disc was playing, pressing the VOL/ON·OFF control knob will start the compact disc. DISC button: When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will [...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. DISC·AUX button 6. TRACK button 7. SEEK/CA T button 8. SA T* button 9. RPT/RDM button 10. SCAN button 11. FM·AM button *No satellite radio reception is available when the SA T button is presse[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Bal- ance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until t[...]

Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key. When the feature is activated, the amber indica- tor next to the word ON will illuminate. CD, DVD or USB with compressed audio file[...]

The FM stereo indicator STEREO will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automati- cally change from stereo to monaural reception. SA T band select : Pressing the SA T button will change the band as follows: XM1* → XM2* → XM3* → XM1 (satellite, if so equipped) When the SA T button is [...]

Menu (XM , if so equipped) Select the “Menu” key using the NISSAN control- ler or touchscreen to see a list of options: ● Preset List – Displays the list of presets. Press and hold the touchscreen or ENTER button on the NISSAN controller to save a preset. ● Customize Channel List – deselect chan- nels to skip while using the TUNE/FOLDER[...]

times to skip back through tracks. The compact disc will go back the number of times the button is pressed. When the TRACK button is pressed while the compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks. The compact disc will advance the number of times the button is pressed. (Wh[...]

Normal - Plays all tracks on the CD in sequential order until stopped. ● Folder List The folders on the disc are displayed. Select the key of a folder name to begin playing tracks from that folder. ● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. LHA1262 LHA1260 LHA1261 Monitor, cli[...]

● Title T ext Priority ● Record to Music Box, Automatic Recording, Recording Quality For more information about these options, see “Music Box™ Hard-Drive Audio System with Navigation System” in this section. CD EJECT button: When the button is pressed with the com- pact disc loaded, the compact disc will be ejected. When the button is pre[...]

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the DISC·AUX button repeatedly until the AUX mode appears in the display . The output from the device will be played through the display (when the vehicle is in the (P) Park po[...]

DIGITAL V ERSATILE DISC (DVD) PLAYER OPERATION (models with Navigation System) Precautions Start the engine when using the DVD entertain- ment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. T o view movies on the front display,[...]

The operation screen will be turned on when the DISC-AUX button is pressed while a DVD is playing. The operation screen will turn off auto- matically after a period of time. T o turn it on again, press the DISC-AUX button. DVD operation keys When the DVD is playing without the operation screen being shown, you may use the touch- screen to select it[...]

● Group Search (DVD-AUDIO, VIDEO CD) The scene with the specified group will be displayed the number of times the “+” or “-” side is selected. ● 10 Key Search (DVD-VIDEO, VIDEO CD, CD-DA , DVD-VR) Select the “10 K ey Search” key to open the number entry screen. Input the number you want to search for and select the “OK” key. The[...]

USB INTERFACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack The USB input jack is located in the center con- sole. Open the protective cover 䊊 1 on the USB jack, then insert the USB device into the jack. When a compatible storage device is plugged into the jack, compatible audio files on the stor- a[...]

USB INTERFACE (models with Navigation System) Connecting a device to the USB input jack The USB input jack is located in the center con- sole. Open the protective cover 䊊 1 on the USB jack, then insert the USB device into the jack. When a compatible storage device is plugged into the jack, compatible audio and video files on the storage device ca[...]

SEEK/CA T and TRACK (Reverse or Fast Forward) buttons: Press and hold the SEEK/CA T (rewind) button or TRACK (fast forward) button for 1.5 seconds while an audio file on the USB device is playing to reverse or fast forward the track being played. The track plays at an in- creased speed while reversing or fast forwarding. When the button is released[...]

● Folder List/T rack List Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen and enables you to switch to the movie playback mode. ● Play Mode Choose the preferred play mode using the NISSAN controller or the touchscreen. Movie file operation Park the vehicle in a safe location for the front se[...]

● Previous Chapter/Rewind: Select the key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the key is selected. Press and hold the key to rewind the chap- ter. List : Select the “List” key on the movie file operation screen to display the file list. Settings: Select the “Settings” key to adjust th[...]

iP od 姞 * PLAYER OPERATION WITHOUT NAVIGATION SYSTEM (if so equipped) Connecting iP od 姞 T o connect an iPod 姞 to the vehicle so that the iP od 姞 can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Open the protec- tive cover 䊊 1 on the USB jack in the center console. Then c[...]

Interface: The interface for iP od 姞 operation shown on the vehicle center display is similar to the iP od 姞 in- terface. Use the NISSAN controller and the BACK button to play the iP od 姞 with your favorite settings. The following items can be chosen from the menu list screen. For further information about each item, see the iP od 姞 Owner?[...]

tery will be charged while connected to the ve- hicle with the ignition switch in the ACC or ON position. While connected to the vehicle, the iP od 姞 can only be operated by the vehicle audio controls. T o disconnect the iPod 姞 from the vehicle, remove the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iP [...]

DISC·AUX button: When the DISC·AUX button is pressed with the system off and the iP od 姞 connected, the system will turn on. If another audio source is playing and the iP od 姞 is connected, press the DISC·AUX button repeatedly until the center display changes to the iP od 姞 mode. Interface: The interface for iP od 姞 operation shown on th[...]

Play mode: While the iP od 姞 is playing, touch the “Menu” key to display the iP od 姞 menu. T ouch the “Play Mode” key to display the Play Mode screen and adjust the settings for Shuffle, Repeat and Audio- books. For further information about each item, see the iP od 姞 Owner’s Manual. SEEK/CA T and TRACK buttons: When the SEEK/CA T b[...]

T o exit the scrolling by letter mode, perform one of the following: ● Press the ENTER button on the NISSAN controller. ● Push the ENTER switch on the steering wheel. ● Do not touch the controls for 2 seconds. MUSIC BOX™ HARD DRIVE AUDIO SYSTEM WITHOUT NAVIGATION SYSTEM (if so equipped) The Music Box Hard Drive audio system can store songs [...]

● The recording process can be stopped at any time. All tracks that were played before the CD was stopped are stored. ● Individual tracks can be deleted from the Music Box after the CD is recorded. If the title information of the track being recorded is stored either in the hard drive or in the CD, the title is automatically displayed on the sc[...]

Stopping playback: The system stops playing when: ● Another mode (radio, CD, USB memory , iP od 姞 or AUX) is selected. ● The audio system is turned off. ● The ignition switch is placed in the OFF position. SEEK/CA T and TRACK buttons: Press the SEEK/CA T button while a track is playing to return to the beginning of the current track. Press [...]

● Artists Play tracks by an artist whose music is cur- rently being played. The artists are stored in alphabetical order. ● Genres Play tracks by genre by selecting from the displayed list. ● All Songs Play tracks from all recorded tracks. The tracks are stored in alphabetical order. ● T ransfer Titles from USB Update the in-vehicle Graceno[...]

● Automatic Recording: When this item is turned to ON, the Music Box Hard Drive audio system automatically starts recording when a CD is inserted. ● Recording Quality: Set the recording quality of 105 kbps or 132 kbps. The default is set to 105 kbps. ● Gracenote Database V ersion: The version of the built-in Gracenote 姞 Data- base is displa[...]

GRACENO TE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NO T LIMITED T O, IMPLIED WARRANTIES OF MER- CHANT ABILITY , FITNESS FOR A P ARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT . GRACENO TE DOES NO T W ARRANT THE RE- SUL TS THA T WILL BE OBT AINED BY Y OUR USE OF THE GRACENO TE SOFTWARE OR ANY GRACENO TE SERVER. IN NO CASE WILL GRA[...]

Recording CDs 1. Operate the audio system to play a CD. For information on playing CDs, see “Com- pact Disc (CD) player operation” in this sec- tion. 2. T ouch the “Start REC” key. REC CD ap- pears on the screen. NO TE: ● The system starts playing and recording the 1st track on the CD when the “Start REC” key is selected. ● Individu[...]

Stopping recording: T o stop the recording, touch the “Stop REC” key on the screen. If the CD is ejected, the audio system is turned off or the ignition switch is placed in the OFF position, the recording also stops. Playing recorded songs Select the Music Box audio system by using one of the following methods: ● Press the SOURCE select switc[...]

The NISSAN controller can also be used to se- lect tracks. For more information on how to use the NISSAN controller, see “How to use the NISSAN control- ler” in this section. TUNE/FOLDER knob: The TUNE/FOLDER knob skips from album to album unless it is playing “ All Songs” from the Music Library menu. When playing “ All Songs”, the TUNE[...]

● My Playlists Displays the playlists stored in the system. T ouch the “Edit” key next to a playlist to perform the following operations for that playlist: – Add Current Song - adds the song cur- rently playing to the playlist. – Add Songs by Album - adds songs to the playlist by album. – Add Songs by Artist - adds songs to the playlist[...]

● Play Mode Alters the play mode of the playlist. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: – Normal - no play pattern is applied. – 1 Album Repeat - the songs in the current album are repeated. – 1 T rack Repeat - the current track is re- peated. – 1 Album Random - the songs in the cur- [...]

Music Box settings T o set up the Music Box Hard Drive audio system to your preferred settings, touch the “Menu” key during playback, then touch the “Music Box Set- tings” key . ● Music Box Used/Free Space: Displays the number of tracks and albums stored on the hard drive. The percentage of hard drive space taken up and the amount of rema[...]

● CDDB V ersion: Shows the version of CDDB (Compact Disc Data Base) . Gracenote 姞 NO TE: ● The information contained in the Gracenote 姞 Database is not fully guaran- teed. ● The service of the Gracenote 姞 Database on the Internet may be stopped without prior notice for maintenance. End-User License Agreement USE OF THIS PRODUCT IMPLIES [...]

USE OF THE GRACENO TE SOFTWARE OR ANY GRACENO TE SERVER. IN NO CASE WILL GRACENO TE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENT AL DAM- AGES OR FOR ANY L OST PROFITS OR LOST REVENUES. Copyright : Music recognition technology and related data are provided by Gracenote 姞 . Gracenote is the industry standard in music recognition technol- ogy and rel[...]

4. A screen will appear asking if you are con- necting the device to use with the hands- free phone system. Select the “No” key . 5. Enter a PIN of your choice. It will be needed by your Bluetooth 姞 audio device to com- plete the connection process. See the Bluetooth 姞 audio device’s owner’s manual for more information. Audio main opera[...]

Bluetooth 姞 audio settings T o adjust the Bluetooth 姞 audio settings, follow the procedure below: 1. Press the SETTING button on the instru- ment panel. 2. Select the “Bluetooth” key . 3. Select the “Connected Devices” key . 4. Select the “ Audio Player” key . 5. A list of the connected Bluetooth 姞 audio players is displayed. Sele[...]

6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth 姞 audio player. Select the “Edit” key to edit the details of the player, such as Device Name. Select the “Delete” key to delete the device. CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend t[...]

1. P ower on and SOURCE select switch 2. T uning switch 3. V olume control switch 1. P ower on and SOURCE select switch 2. Menu control switch/ENTER button 3. V olume control switch STEERING WHEEL SWITCH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. POWER on switch With the ignition switch in the ACC o[...]

Menu control switch/ENTER button While the display is showing a MAP , ST A TUS or Audio screen, tilt the Menu Control switch up- ward or downward to select a station, track, CD or folder. For most audio sources, tilting the switch up/down for more than 1.5 seconds pro- vides a different function than a tilting up/down for less than 1.5 seconds. AM [...]

1. VOL (volume) control switch 2. TUNE/TRACK switch 3. ON/OFF button 4. SRC (source) select button 5. Display REAR AUDIO CONTROLS (if so equipped) The audio system can also be operated using the rear controls. For information on canceling the rear seat con- troller, see “Rear control cancel switch (if so equipped)” in the “Instruments and con[...]

CD: ● Push the or side of the switch to select the next track or the beginning of the current track. CD/USB (if so equipped) with MP3/WMA: ● Push the or side of the switch to select the next track or the beginning of the current track. ● Push and hold the or side of the switch to change folders. CD/DVD/USB (if so equipped) with com- pressed a[...]

When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some juris- dictions[...]

Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have a com- patible Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth 姞 wireless technology , you can make or receive a hands-free telephone call with your cellular [...]

– Y our vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a moun- tainous area. – Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficu[...]

Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly . ● W ait un[...]

– NO T “One eight hundred six six two sixty two hundred,” and – NO T “One eight oh oh six six two sixty two hundred” ● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to ente[...]

Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition sys- tem is active, press and hold the button for 5 seconds to quit the voice recognition system at any time. TUNING SWIT CH Wh[...]

Main Menu “Connect phone” 䊊 A “ Add phone” 䊊 B Initiate from handset 䊊 C Name phone 䊊 D 1. Press the button on the steering wheel. The system announces the available commands. 2. Say: “Connect phone” 䊊 A . The system ac- knowledges the command and announces the next set of available commands. 3. Say: “ Add phone” 䊊 B . T[...]

Once the call has ended, press the button on the steering wheel. NO TE: If you do not wish to take the call when you hear the ring tone, press the button on the steering wheel. For additional command options, see “List of voice commands” later in this section. LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Con[...]

“Call back” 䊊 E Use the Call Back command to dial the number of the last incoming call within the vehicle. The system acknowledges the command, re- peats the number and begins dialing. If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. During a call During a call there ar[...]

“T ransfer entry” 䊊 A Use the T ransfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary .” If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name al[...]

When a phone is connected to the system, the phonebook is automatically downloaded to the vehicle. This feature allows you to access your phonebook from the Bluetooth 姞 system and call contacts by name. Y ou can record a custom voice tag for contact names that the system has difficulty recognizing. For more information see “Record Name” in th[...]

“Recent Calls” Main Menu “Recent Calls” “Outgoing” 䊊 A “Incoming” 䊊 B “Missed” 䊊 C Use the Recent Calls command to access out- going, incoming or missed calls. “Outgoing” 䊊 A Use the Outgoing command to list the outgoing calls made from the vehicle. “Incoming” 䊊 B Use the Incoming command to list the incoming c[...]

3. Press and hold the button for more than 5 seconds. 4. The system announces: “Press the PHONE/SEND ( ) button for the hands-free phone system to enter the speaker adaptation mode or press the PHONE/END ( ) button to select a dif- ferent language.” 5. Press the button. For information on selecting a different lan- guage, see “Choosing a lang[...]

● call eight oh five four one ● correction ● connect phone ● dial seven four oh one eight ● previous entry ● delete ● dial nine seven two six six ● call seven six three oh one ● go back ● call five six two eight zero ● dial six six four three seven MANUAL CONTROL (if so equipped) While using the voice recognition system, it is[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone c[...]

REGULATORY INFORMATION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device may n[...]

2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth 姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies accor[...]

V EHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally dow[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. V oicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry, select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the PHONE button on the instrument panel or the switch on the steering wheel. The “Phone” screen will appear on the display . 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handse[...]

Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display . b. Press the PHONE button on the instrument panel. c. Press and hold the phone button on the steering wheel switc[...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display . ● Push the switch on the steering wheel. ● When the “Call in Progress” screen is dis- played, press the PHONE button on the instrument panel to hang up. If any other screen is currently display[...]

Download Handset Phonebook: See “Handset Phonebook” in this section for adding, editing and deleting contacts in the handset phonebook. V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automa[...]

Edit Bluetooth Info: Check information about the device name, device address and device PIN. Replace Connected Phone: Replace the phone currently connected to the system. This option allows you to keep any voic- etags that were recorded using the previous phone. CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if recep[...]

NISSAN V oice Recognition allows hands-free operation of the systems equipped on this ve- hicle, such as phone and vehicle information. There are two voice recognition modes of opera- tion available. They are: ● Standard Mode ● Alternate Command Mode In Standard Mode (the factory default setting) , commands that are available are always shown o[...]

1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . NO TE: Y ou can skip steps 1 to 3 by pressing the switch and saying “Help” . 4. Select the “User Guide” key . 5. Select an item. Available items: ● Getting Started Describes the basics of how to operate the V oic[...]

T utorials on the operation of the Voice Rec- ognition system If you choose “Finding a Street Address” , “Using the Address Book” or “Placing Calls”, you can view tutorials on how to perform these operations using V oice Recognition. Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and [...]

Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands cor- rectly . 1. Select “Help on Speaking” . 2. Y ou can confirm the page by scrolling the screen using the NISSAN controller or touching the page down key . V oice recognition settings The available settings of the NISSAN V [...]

GIVING VOICE COMMANDS 1. Press the switch located on the steer- ing wheel. 2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu p[...]

● If you want to adjust the volume of the sys- tem feedback, push the volume control switch on the steering wheel or use the audio system volume knob while the system is making an announcement. How to speak numbers V oice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule:[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays V ehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Cha[...]

V ehicle Information Command: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio sy[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number” . 5. Say “800”. 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662” . LHA1334 LHA1335 LHA1336 4-154 Monitor, climate, audio, phone and voice recognition systems[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200” . 10. The system announces, “Dial or Change Number?” 11. Say “Dial” . 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone” . 4. Say “International Call” . WHA1332 LHA1333 LHA1334 4-156 Monitor, climate, aud[...]

5. Say “011811112223333” . 6. Say “Dial” . 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN V OICE RECOGNITION ALTERNATE COMMAND MODE The Alternate Command Mode enabl[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display . 3. Select the “V oice Recognition” key . 4. Select the “ Alternate Command Mode” key . 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode[...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help” , you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key using the NISSAN controller. 3. Select the “V oice Recognition” key usi[...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a smaller number. Zoom Out <1 to 13> Changes the map scale to a larger number. Guidance V oice ON/OFF T urn[...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . 4. Select the “User Guide” key . 5. S[...]

Before starting T o get the best performance from NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing the voice commands cor- rectly . ● When the c[...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This setting enables control of the Audio and Climate Control systems in addi- tion to additional commands [...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The V oice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also disp[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

MEMO 4-168 Monitor, climate, audio, phone and voice recognition systems[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire pressure monitoring system (TPMS) ..........5 - 3 Avoiding collision and rollover ....................5 - 5 Off-road recovery ...........................[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do [...]

● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h) . Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After all 4 tires are inflated to the reco[...]

Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle. FCC Notice: Changes or modifications not expressly ap- p[...]

● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road. RAPID AIR PRESSURE LOSS Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid [...]

WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecu- tive times in quick succession or the igni- tion switch is pushed and held for more than 2 seconds.) If the engine stops while the vehicle is being driven, this could lead to a [...]

3. The steering wheel lock (if so equipped) is designed to prevent steering in case of ve- hicle theft. The shift selector can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed. For models with a steering wheel lock mechanism: ● In order for the steering wheel to be locked, it must b[...]

EMERGENCY ENGINE SHUT OFF T o shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times, or – Push and hold the push-button ignition switch for more than 2 seconds. NISSAN INTELLIGENT KEY™ BATTERY DISCHARGE If the battery of the Intelligent K[...]

CAUTION ● Never place anything except the Intelli- gent Key in the Intelligent Key port. Do- ing so may cause damage to the equipment. ● Make sure the Intelligent Key is in the correct direction when inserting it to the Intelligent Key port. The engine may not start if it is in the wrong direction. ● Remove the Intelligent Key from the Intell[...]

1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral) . P (Park) is recommended. The starter is designed not to operate if the shift selector is in any of the driving positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the igni- tion switch to start the engine. T o start the engine[...]

WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neu- tral) to R (Reverse) , D (Drive) , Ds (Drive Sport) or (M) Manual shift mode. Al- ways depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident. ● Cold engine idle speed is high, so use caution[...]

The CVT can operate in two manual drive modes: ● M (Manual) mode - With the shift selector in the manual shift gate Ds (Drive Sport) mode, M (Manual) mode can be selected by mov- ing the shift selector up (+) or down (–) or using the shift paddles (if so equipped) up (+) or down (–) . In M mode, the transmission will produce noticeable upshif[...]

WARNING Apply the parking brake if the shift selec- tor is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. P (Park) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the ve[...]

Manual shift mode When the shift selector is in the Ds (Drive Sport) position, the transmission is ready for the manual shift mode. Shift ranges can be selected manu- ally by moving the shift selector up or down, or pulling the right-side or left-side paddle shifter. T o cancel the Ds mode, return shift selector to the D (Drive) position. The trans[...]

When canceling the manual shift mode: Return the shift selector to the D (Drive) position to return the transmission to the normal driving mode. ● In the manual shift mode, the transmis- sion may not shift to the selected gear. This helps maintain driving perfor- mance and reduces the chance of ve- hicle damage or loss of control. ● In the manu[...]

WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunction- ing stop lights could cause an accident injuring yourself and others. Accelerator downshift — in D (Drive) position and manual shift mode For passing or hill climbing, de[...]

WARNING ● Be sure the parking brake is fully re- leased before driving. Failure to do so can cause brake failure and lead to an accident. ● Do not release the parking brake from outside the vehicle. ● Do not use the shift selector in place of the parking brake. When parking, be sure the parking brake is fully engaged. ● Do not leave childre[...]

WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. ● In heavy traffic or in traffic that varies in speed. ● On winding or hilly roads. ● On slippery roads (rain, snow, ice, etc .) . ● In very windy areas. Doing so could cause a loss of vehicle co[...]

CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, e[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in[...]

The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds. WARNING If the engine is not running or is turned off while driving, the [...]

This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on [...]

When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and [...]

● Do not modify the vehicle’s suspension. If suspension parts such as shock ab- sorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN approved for your vehicle or are ex - tremely deteriorated the V ehicle Dy- namic Control system may not operate properly. This could adversely affect ve- hicle handling performance, and t[...]

DRAINING OF COOLANT WATER If the vehicle is to be left outside without anti- freeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” in the “Maintenance and do-it-yourself” section of this manual. TIRE EQUIPMENT 1. SUMMER tires have a tread designed to pro[...]

ENGINE BLOCK HEATER (if so equipped) WARNING ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. Y ou can be se- riously injured by an electrical shock if you use an ungrounded connection. ● Disconnect and properly store the en- gine block heater cord before starting the engine. Damage to the cord [...]

MEMO 5-28 Starting and driving[...]

6 In case of emergency Emergency engine shut off .........................6 - 2 Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 3 Jump starting .....................................6 - 8 Push starting .............................[...]

T o shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times, or – Push and hold the push-button ignition switch for more than 2 seconds. TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System [...]

● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CHANGING A FLAT TIRE If you have a flat tire, follow the instructions be- low: Stopping the vehicle 1[...]

Getting the spare tire and tools Open the trunk. Remove the floor carpeting. T ype A LCE0186 T ype B LCE0198 T ype A LCE0187 6-4 In case of emergency[...]

Lift the spare tire cover. Remove the jack 䊊 1 and wheel nut wrench 䊊 2 from the tool box on the right side of the trunk compartment. Remove the spare tire. T ype B LCE0199 WCE0189 WCE0188 In case of emergency 6-5[...]

Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided with your vehicle on other vehicles. The [...]

Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nu[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D , 䊊 E ) . Lower the vehicle completely. WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. Thi[...]

● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery. It could explode and cause se- rious injury. ● Y our vehicle [...]

● Make sure the jumper cables do not touch moving parts in the engine com- partment and that the cable clamps do not contact any other metal. 5. Start the engine of the booster vehicle and let it run for a few minutes. 6. K eep the engine speed of the booster ve- hicle at about 2,000 rpm and start the en- gine of the vehicle being jump started. C[...]

3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is coming from the en- gine, stand clear to prevent getti[...]

For information about towing your vehicle behind a recreational vehicle (RV) , refer to “Flat towing” in the “T echnical and consumer information” sec- tion of this manual. T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as ill[...]

CAUTION ● Never tow CVT models with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to the transmission. If it is nec- essary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels. ● When towing with the front wheels on t[...]

● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle. ● Route recovery devices so they do not touch any part of the veh[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBODY In areas where road salt is used in winter, it is necessary to clean the und[...]

CAUTION Follow the directions below to avoid staining or discoloring the wheels: ● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. ● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the clean[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Never [...]

SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual. WARNING Do not allow wet seat belts to roll up[...]

CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them. Chemicals used for road surface de-icing are extremely corr[...]

MEMO 7-8 Appearance and care[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ..........[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent [...]

1. P ower steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse block 6. Battery 7. Fuse/Fusible link box 8. Engine oil dipstick 9. Radiator cap 10. Drive belt location 11. Engine coolant reservoir* 12. Windshield-washer fluid reservoir* NO TE: Side covers removed for clarity. WDI0662 ENGINE COMPARTMENT C[...]

T o remove the engine compartment covers, un- hook the clips 䊊 A located as illustrated. T o remove the engine cover, pull the cover up- ward first 䊊 1 and then toward the front of the vehicle 䊊 2 . The engine cooling system is filled at the factory with Genuine NISSAN Engine Coolant to provide year-round anti-freeze and coolant protection. T[...]

CAUTION When adding or replacing coolant, be sure to use only a Genuine NISSAN Long Life Antifreeze/Coolant or equivalent with the proper mixture ratio of 50% anti-freeze and 50% demineralized or distilled water. The use of other types of coolant solu- tions may damage the engine cooling system. Outside temperature down to Genuine NISSAN Long Life [...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way . 5. Remove the d[...]

CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn the engine off and wait more than 10 minutes. 4. Place a large drain pan under the drain plug 䊊 A (under the body) . 5. Remove the oil filler cap 䊊 B (inside the en- gine co[...]

CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn your[...]

The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) . If the fluid is at or below the MIN line, add Genu- ine NISSAN PSF to HO T M[...]

BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer. WINDSHIELD-WASHER FLUID RESERVOIR [...]

● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. WARNING ● Do not expose the batter[...]

2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. . Reinstall the vent caps. V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting [...]

CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T[...]

REPLACING SPARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in the “NISSAN Service and Maintenance Guide” . Do not service iridium-tipped spark plugs by cleaning or regap- ping. ?[...]

WARNING ● Operating the engine with the air cleaner removed can cause you or oth- ers to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the a[...]

CLEANING If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing with clear water. Clean each blade [...]

Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B . If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with se[...]

T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compartment fuse box. T ype A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box. T ype A fuses can be installed in the engine com- partment and passenger compartment fuse boxes. I[...]

3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. 5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by [...]

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Pull the fuse box cover to remov[...]

4. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 5. Push the fuse box cover to install. 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. CAUTION Be careful not to allow children to swallow the battery or removed parts. T ype A WDI0452 T ype B LDI0456 BATTERY REPLACEMENT 8[...]

NISSAN INTELLIGENT K EY™ Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey. 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one. Re[...]

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, in- cluding interference that may cause undes- ired operation of the device. HEADLIGHTS Replacing the xenon headlight bulb (if so equipped) WARNING Ꮨ HIGH VOL TAGE When xenon headligh[...]

EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* Headlight assembly High (Halogen) 65 9005 (HB3) Low (Halogen) (if so equipped) 55 H11 Low (Xenon) (if so equipped) 35 D2S Park/T urn 28/8 3457NAK Side marker 5 WY5W Front fog light (if so equipped) 55 H11 Front personal/map lights 8 — Glove box light 3.4 158 V anity mirror light 1.4 — Ste[...]

1. Headlight assembly 2. Map light 3. Rear personal lights 4. Fog light (if so equipped) 5. Step light 6. High-mounted stop light (T ype A) 7. T runk light 8. High-mounted stop light (T ype B) 9. License plate light 10. Rear combination light WDI0666 8-28 Maintenance and do-it-yourself[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. WDI0263 Front personal/map lights WDI0667 V anity mirror light WDI0340 Maintena[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light LDI0341 Rear personal light WDI0670 T runk light WDI0343 8-30 Maintenance and do-it-yourself[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, one or more o[...]

WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V .S.S./C .M .V .S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire and Loading Information label (if so equipped) . Do not load your ve- hicle beyond this capacity. Over-[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory . 䊊 4 Co[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

Size Cold Tire Inflation Pres- sure Front Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Rear Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Spare Tire (T emporary) T145/80D17 420 kPa, 60 PSI T145/80R17 420 kPa, 60 PSI TIRE LABELING Federal law req[...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three-[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Tire chains/cables should not be installed on P245/40VR19 size tires. Installation of the tire chains/cables on P245/40VR19 size tires will cause damage to the ve- hicle. If you plan to us[...]

Wheel nut tightening torque: 83 ft-lb (112 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels. ● Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressu[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ...............................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.[...]

FUEL RECOMMENDATION NISSAN recommends the use of premium un- leaded gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you may[...]

T ake care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) . Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispen[...]

ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve [...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. CVT (in “N” position) Ignition timing (degree B.T .D.C. at idle speed) C[...]

WHEELS AND TIRES Wheels 18 x 8.0J 19 x 8.0J Tires P245/45VR18 P245/40VR19 P245/40WR19 Spare tire T145/80D17 T145/80R17 Speed rating 18” V 19” V 19” W DIMENSIONS AND WEIGHTS Overall length in (mm) 190.6(4,843) Overall width in (mm) 73.2(1,860) Overall height in (mm) 57.8(1,467) Front T rack 18 inch tire in (mm) 62.4(1,585) 19 inch tire in (mm)[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weig[...]

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0174 WTI0167 WTI0203 INSTALLING FRONT LICENSE PLATE T echnical and consumer info[...]

Use the following steps to mount the front license plate: 䊊 1 Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder. 䊊 2 Mount the license plate using two M6- 14mm bolts. License plate [...]

● V ehicle Capacity Weight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of t[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions also can affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The trans- mission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically de- crease engine powe[...]

Maximum Gross V ehicle Weight (GVW)/Maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle W eight Rating (GVWR) shown on the F .M.V .S.S./C.M.V .S.S. certification label. The GVW equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equ[...]

4,546 lb. (2062 kg) GVWR – 4,446 lb. (2016 kg) GVW = 100 lb. (45 kg) Available for tongue weight 1,000 lb. (454 kg) Capacity available for towing 100 lb. (45 kg) Available tongue weight / 1,000 lb. (454 kg) Available capacity = 10 % tongue weight The available towing capacity may be less than the maximum towing capacity due to the passen- ger and[...]

● The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut. Ball mount The hitch ball is attached to the ball mount and the ball mount is inserted into the hitch receiver. Choose a proper class ball mount based on the trailer weight[...]

T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type module/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal [...]

● Check your hitch, trailer tire pressure, ve- hicle tire pressure, trailer light operation, and trailer wheel lug nuts every time you attach a trailer to the vehicle. ● Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle. ● Determine t[...]

● Avoid towing a trailer for your vehicle’s first 500 miles (805 km) . ● For the first 500 miles (805 km) that you do tow , do not drive over 50 MPH (80 km/h) . ● Have your vehicle serviced more often than at intervals specified in the recommended Maintenance Schedule in the “NISSAN Ser- vice and Maintenance Guide” . ● When making a t[...]

CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever flat towing your vehicle, al- ways tow forward, never backward. ● DO NO T tow any automatic transmis- sion vehicle with all four wheels on the ground (flat towing) . Doing so WILL DAMAGE internal transmission parts due to lack of transmission lub[...]

WARNING The temperature grade for this tire is es- tablished for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, ei- ther separately or in combination, can cause heat build-up and possible tire failure. Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emiss[...]

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually , the ready condition[...]

This vehicle is equipped with an Event Data Re- corder (EDR) . The main purpose of an EDR is to record, in certain crash or near crash-like situa- tions, such as an air bag deployment or hitting a road obstacle, data that will assist in understand- ing how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynami[...]

For Canada T o purchase a copy of a genuine NISSAN Ser- vice Manual or Owner’s Manual please contact your nearest NISSAN dealer. For the phone num- ber and location of a NISSAN dealer in your area call the NISSAN Information Center at 1-800- 387-0122 and a bilingual NISSAN representa- tive will assist you. Also available are genuine NISSAN Servic[...]

10 Index A Air bag (See supplemental restraint system) .................... .1-39 Air bag system Front (See supplemental front impact air bag system) .............. .1-46 Air bag warning light .......... .1-53, 2-14 Air cleaner housing filter ........... .8-17 Air conditioner Air conditioner service .......... .4-48 Air conditioner specification la[...]

CD player (See audio system) ..... .4-72, 4-79 Child restraints ...... .1-20, 1-20, 1-21, 1-23 Precautions on child restraints ........ .1-21, 1-27, 1-32, 1-36 T op tether strap anchor point locations . .1-25 Child safety rear door lock ........... .3-6 Chimes, audible reminders .......... .2-16 Cleaning exterior and interior .......... .7-2 Clock [...]

Engine oil .................. .8-9 Power steering fluid ............ .8-12 Window washer fluid ........... .8-13 F .M.V.S.S. certification label .......... .9-10 Fog light switch ................ .2-32 Folding rear seat ................. .1-5 Front air bag system (See supplemental restraint system) ..... .1-46 Front seats .................... .1-2 [...]

Engine serial number ........... .9-10 F .M.V.S.S. certification label ........ .9-10 Tire and Loading Information label .... .9-11 V ehicle identification number (VIN) plate . .9-9 W arning labels (for SRS) ......... .1-53 LA T CH (Lower Anchors and T ethers for CHildren) System ..................... .1-23 License plate Installing the license plat[...]

Phone, Bluetooth 姞 hands-free system ................ .4-118, 4-133 Power Power door locks .............. .3-5 Power outlet ................ .2-36 Power rear windows ............ .2-43 Power steering fluid ............ .8-12 Power steering system .......... .5-22 Power windows .............. .2-42 Rear power windows ........... .2-43 Precautions [...]

Sun visors ................... .3-24 Sunglasses case ................ .2-38 Sunroof (see Moonroof) ............ .2-45 Supplemental air bag warning light . . .1-53, 2-14 Supplemental front impact air bag system . . .1-46 Supplemental restraint system Information and warning labels ...... .1-53 Precautions on supplemental restraint system ...........[...]

Engine oil pressure warning light ..... .2-12 Hazard warning flasher switch ...... .2-33 Low fuel warning light ....... .2-13, 2-23 Low tire pressure warning light ...... .2-12 Low windshield-washer fluid warning light ..................... .2-23 Passenger air bag and status light .... .1-48 Seat belt warning light ........... .2-13 V ehicle securi[...]

RECOMMENDED FUEL: NISSAN recommends the use of premium un- leaded gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regu- lar gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you may[...]

® 2010 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2010 N IS SAN MAX I MA A35-D Printing : June 2010 (05) Publication No.: Printed in U .S.A. A35-D OM0E 0A35U2[...]