Nokia 239 инструкция обслуживания

[...]

DESCRIPTION OF KEYS Use the phone keys as follows: For your information... To install/charge the battery: ...................................................See page 8/9 To switch on: .............................................................................. See page 10 To make a call: ...........................................................[...]

QUICK GUIDE Adjust Volume Press to ∆ increase and ∇ to (during a call) decrease the volume Clear a digit Press the CLR key Clear display Press and hold the CLR key Ending a Call Press the END key Last number redial Ensure the display is clear and press SEND Making a call Key in the area code and phone number and press the SEND key Receiving a c[...]

LIST OF MENU FUNCTIONS Menu Name Shortcut Keys Description LOCK PHONE MENU 0 (L) Locks/unlocks the phone. SYSTEM SELECT MENU 1 Selects roaming mode (system feature). RINGING TYPE MENU 2 Selects the ringing tone type. CALL TIMERS MENU 3 Displays length of calls. (S) Resets the timers. LIGHTS CONTROL MENU 4 Selects operation of display and keypad lig[...]

1 CONTENTS Important Safety Information ......................3 Emergency Calls............................................................4 Display Indicators ............................................... 7 Getting Started .....................................................8 Installing the battery ..............................................[...]

Menu Functions ..................................................29 Using the menu.........................................................29 List of menu functions ...............................................31 Description of menu functions .................................. 32 Lock Phone (Menu 0)............................................. 32[...]

IMPORTANT SAFETY INFORMATION TRAFFIC SAFETY Do not use a hand-held telephone while driving a vehicle. If using a hand-held telephone, park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate[...]

Only qualified personnel should install or service the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. Electronic fuel-injection systems, electronic anti-skid braking systems, electronic cruise-control systems and other electronic systems can malfunction due to the lac[...]

If Keyguard is in use, you may have to deactivate it (press MENU ABC ) before you can make an emergency call. Consult this document and your local cellular service provider. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service provider[...]

FCC/INDUSTRY CANADA NOTICE Your phone may cause TV or radio interference (e.g. when using telephone in close proximity of receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. THIS DEVICE COMPLIES WITH PART[...]

DISPLAY INDICATORS A AB Indicator Shows which network is in use: A – System A only B – System B only A B – Both systems Blank – Home area only B Signal Indicator Shows approximate received signal strength. C ON Indicator Shows that phone is switched on. D ROAM Indicator Shows which system the phone is using: On – home system in a non- hom[...]

If charging while phone is switched off, the indicator bars disappear, but B remains on. H Number Shows menu or memory location selected. I MENU Indicator Shows that menu mode has been selected. J ALPHA Indicator Shows that alpha mode has been selected; letters can be entered, and names can be displayed. GETTING STARTED INSTALLING THE BATTERY 1 Pla[...]

9 1 Take the charger supplied, and fit the connector into the phone. B Connect the charger to a standard AC outlet (or cigarette lighter receptacle). C The phone will beep to indicate the charger has been connected properly. D For fastest charging, make sure the phone is off. E Leave the battery on charge for 24 hours before initial use. After the [...]

SWITCHING ON A If your phone has an extendable antenna, extend the antenna fully. B Press and hold the ON key. The phone will carry out a short self- test, briefly displaying the ‘wake-up’ message. (This message is pro- grammed by your dealer, but you may change it if you wish; refer to ‘Changing the wake-up message’, page 27, for further d[...]

11 BASIC FUNCTIONS RECEIVING A CALL A Press any key except ON or the volume keys. An incoming call is indicated by a ringing tone, and the CALL message flashing on the display. If the SILENT SERVICE option (Menu 6) has been sele cted there will be no ringing tone; the keypad and dis play lights will flash instead, and only a short beep will be hear[...]

Notes: If NO SVC is displayed: You are outside the cellular service area. If NOT ALLOWED is displayed: The call is not allowed or your phone is locked. (Refer to ‘Call Barring (Menu 14)’, page 41 and ‘Lock phone (Menu 0)’, page 32). If the signal is poor: The quality of your call depends on the signal strength of the cellular signal in your[...]

13 The message PIN CALL ON is briefly displayed con- firming the PIN call activation. To deactivate the PIN call: A Enter the control code * , #, 7, 4, 6, 2, 2, 5, 5, # (spells * # PIN CALL #). The phone prompts for your four-digit PIN CODE? B Press STO without entering the PIN code. The message PIN CALL OFF is briefly displayed con- firming the PI[...]

14 Note : Official emergency numbers vary by location (e.g. 911, 112 or other official emergency number). However, only one emergency number is programmed into your phone to be dialed automatically by one key emergency dialing, which may not be the proper number in all circumstances. One key emergency dialing does not operate when the keyguard feat[...]

15 # Dials the number stored in memory location 97; press and hold the key for 2 seconds. You may store any number in this location. 9 Dials the emergency number (programmed by your dealer); press and hold the key for 2 seconds. This function will not operate if key - guard is active, or if the ‘Emergency 9 key’ function (Menu 13) is set to OFF[...]

16 you press , the phone number in memory location 33 will be dialed automatically (speed dialed). This function has the following benefit: You may change the ‘favorite’ number which is dialed when the key is pressed; e.g. you may keep several such numbers in normal memory locations, and select the required number by simply storing its location[...]

17 SPEED DIALING Speed dialing is the quickest way to recall and dial a number, and is particularly useful for frequently-used numbers. You can speed dial any number already stored in a memory location either by entering the memory location number or the name stored with the number to be called. A Enter the number of the memory location containing [...]

18 USING THE MEMORY GENERAL INFORMATION Memory locations provided: – 98 ‘standard’ locations. Each of these may be used to store a number and a name. – Five locations (numbered 00 to 04) which, together contain the last 5 numbers you dialed. These loca - tions are reserved exclusively for redial numbers, stored automatically by the phone. L[...]

19 99 Holds your own number and the ‘wake-up message’ – the name or text displayed when you switch the phone ON. You cannot change your number, but can change the wake-up message. See ‘Changing the wake-up message’ on page 27. Memory locations 90-99 are allocated for specific purposes. If you wish, however, you may store any information i[...]

20 Memory linking: The memory linking function allows two or more mem - ory locations to be linked. This permits long strings of characters, such as a phone number with an accom - panying DTMF string, to be sent without having to access manually more than one location. To link two locations: Enter the phone number, then a ‘+’ character (press *[...]

21 If storing was successful, the message STORED will be displayed, confirming that the information has been stored in the location number shown on the display. However: – If the location is already occupied when storing a new entry, REPLACE CONTENT? is displayed. – If the location is empty but the name being stored exists in another location, [...]

22 B Press STO then press the specific one-touch dialing key (e.g. * or # ) for 2 seconds. To store a voicemail/favorite number in location 98: A Enter the number. (Refer to ‘Using voicemail/ favorite number’, page 16). B Press STO then . ENTERING A NAME A If in number mode, press ABC . The NAME? prompt and ALPHA indicator will appear, indicati[...]

23 DISPLAYING ‘HIDDEN’ NUMBERS The phone will display up to 16 digits at a time. If you enter a number longer than this, the first digits will disappear off the side of the display. If you type more than 32 digits, the first digits will be lost. A To view the ‘hidden’ digits press and hold RCL . B To view the original display again, release[...]

NOTE: Duplicate names are not allowed (i.e. you may store any particular name in only one memory location). If you attempt to store a name which is already stored in another memory location (e.g. move it) the message MOVE NAME? will remind you that the name already exists. If you accept this, and store the contents in the new location, the original[...]

25 Alternative quick method for recalling contents from the one-touch dialing locations 96 and 97 ( * and # keys respectively) and location 98 (voicemail/favorite number ): – Press RCL then press the * or # keys for 2 seconds. – Press RCL then press the key. The number will then appear on the display. RECALLING INFORMATION BY NAME A Press ABC ([...]

C To search faster, just enter the first letter of the name you are looking for, and then press RCL . The first name beginning with this letter will appear on the display. To scroll forward, press (within 15 seconds) to display the next name, and so on. (If no matching name is stored, the message NOT FOUND will be displayed.) D To check the phone n[...]

REMINDER MESSAGE FACILITY You may enter a message (a name and/or a number), just before switching off the phone, and then have that message recalled automatically when you next power the phone on (e.g. to remind you to make a call). When recalled, the reminder message is shown in alpha mode if there is a text part, otherwise in number mode. You may[...]

28 and it is stored in the alphanumeric part of memory location 99. If the alphanumeric part of location 99 is empty, then your own number, which is stored in the numeric part of location 99, will be displayed instead. If your phone is registered on two networks, the wake-up message (and your own number) displayed will be that for the network curre[...]

29 MENU FUNCTIONS USING THE MENU The menu allows you to: – view the current setting of certain functions, and to change the setting of any function to one of the options offered, – view information. There are two methods of accessing menu functions: – ‘menu’ method (press MENU , use or and press STO ). – ‘shortcut’ method (press MEN[...]

30 The option currently selected, or status, may be displayed. D To change the setting to any of the options offered, press or to scroll through the options until the one you want is displayed. E To select the option displayed (or to accept the lock code or security code entered), press STO . F To quit the menu function, without changing the settin[...]

LIST OF MENU FUNCTIONS Menu Name Shortcut Keys Description LOCK PHONE MENU 0 (L) Locks/unlocks the phone. SYSTEM SELECT MENU 1 Selects roaming mode (system feature). RINGING TYPE MENU 2 Selects the ringing tone type. CALL TIMERS MENU 3 Displays length of calls. (S) Resets the timers. LIGHTS CONTROL MENU 4 Selects operation of display and keypad lig[...]

SID SCREEN MENU 1 8 (L) Selects SID to on/off. NOTE: Menu 18 is avail- able only if SID information has been programmed into the selected NAM by your dealer. (L) = requires entry of 4-digit lock code (default is 1234). (S) = requires entry of 5-digit security code (default is 12345). DESCRIPTION OF MENU FUNCTIONS You may access any of the menu func[...]

33 If you make a mistake when locking or unlocking the phone, the message CODE ERROR will be displayed. In this instance, start again from the beginning. On entering the correct lock code: – When locking the phone, the message LOCKED will be displayed, and will remain to remind you that the phone is locked. – When unlocking the phone, the messa[...]

When you buy your phone, you may register (receive a phone number) with either or both of your local carriers. Contact the office of your home cellular phone company for information about the roaming agreements they have with other cellular phone companies. In some areas, roaming telephones are automatically recognized by the cellular system. In ot[...]

35 Call Timers (Menu 3) This function allows you to check the duration of the calls you have made, on the currently-selected NAM (phone number), and to reset the call timers. You may display three call timers; shown in hours, minutes and seconds: – Duration of the current or last call (LAST .. : .. : .. ) . – Duration of all calls you have made[...]

36 Lights Control (Menu 4) This function allows you to select the operation of the keyboard and display illumination. To conserve battery power, set to LIGHTS OFF . When set to LIGHTS ON: – If the phone is used as a handportable, or is connected to a charger: The lights switch on when a key is pressed; they remain on for 15 seconds after the last[...]

If the phone is connected to a car kit: The options will be different; you may select one of three volume levels (VOLUME LEVEL 1, 2, 3) as well as TONES OFF (press or to select). DTMF tones can be sent (when in a call) even if the keypad tones are switched off. Ringing Volume (Menu 6) This function allows you to select and demonstrate the ringing v[...]

38 NOTE : You cannot change from one network (number) to the other during a call (if you do attempt to change the network, the message CALL IN PROGRESS will be displayed, and no action will result). If you are only registered on one network you cannot access the other. To display your number, or change the network/number: A Press MENU 7 . The telep[...]

39 D To store the new setting in memory press STO . The messages generated by specific accessories will be found in the respective user guides supplied with them. Clear Last Call (Menu 10) This function allows you to set the phone to clear, or retain, (automatically) the last numbers dialed when the phone is switched off. The phone automatically st[...]

Data Mode (Menu 12) This function allows you to send data, while in a call. Your phone must be connected to a Handsfree Car Kit or a data-compatible accessory in order to send data. To send data: A Press MENU 1 2 . You must have a call in progress, otherwise the message NO CALL ACTIVE is dis- played. When the phone is in data mode, the message DATA[...]

C Press or to select EMERGENCY 9 ON or OFF . D Press STO to confirm the setting. Call Barring (Menu 14) This function allows you to restrict certain types of calls: No Restrict (ALLOW ALL) The phone operates normally (no call restrictions). International Call Barring (ALLOW NATIONAL) International calls cannot be dialed (see note below). All other [...]

42 page 32, however, sets all call restrictions and locking so that no memories are accessible. All these options will be temporarily overridden if the phone is locked (to lock the phone, use Menu 0), page 32. To set the call barring option: A Press MENU 1 4 . The message SECURITY? prompts you to enter your security code. B Enter your 5-digit secur[...]

B Enter your 5-digit security code (default 12345). The number will be displayed as asterisks ( ***** ), then press STO . If the correct code has been entered, the currently-selected option will be displayed. C Press or to select the memory-locking option you prefer. D Press STO to confirm the setting. You may recall your own number (in location 99[...]

44 The message KEYGUARD OFF is briefly displayed indicating that the keyguard has now been deactivated. When keyguard is activated: • To answer a call, press the SEND key. During the call, the keypad remains unlocked and the phone can be operated in the normal way. • To end a call, press the END key. After the call is ended, the keyguard automa[...]

45 To place a pause between DTMF digits (when entering the number): Press *** . The ‘p’ character will be displayed. When the DTMF number is sent, a pause of 2.5 seconds will be inserted automatically. To place a ‘wait’ character (when adding a DTMF string to a phone number, or requiring a ‘wait’ within a DTMF string): It is necessary t[...]

Note that when the keypad tones are switched off, the DTMF tones are still sent, even though they cannot be heard. To join two memory locations, in order to send a long DTMF string: A Recall the phone number to the display (the loca - tion in which this is stored is called the ‘first’ location, in these instructions). B Press ** . The ‘+’ c[...]

47 – SID SCRN ON: Your phone will attempt to select one of the dealer programmed (e.g. low cost) pre - ferred types of networks. However, you may experi - ence poor call quality if only distant networks of this type are available. If no preferred service is available on this type of network, then the message SID SCRN BARRED will appear, and the N[...]

48 BATTERY INFORMATION Installing/removing the battery Refer to ‘Installing the Battery’ (page 8). Always switch off the phone before removing the battery. Charging Information Remember that you must charge the battery before you can use the phone. After its initial charging, a battery may be charged with the phone switched on or off; charging [...]

49 C The battery can be charged and discharged hun- dreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery. D Use only batteries approved by the phone manu - facturer and recharge your battery only with the chargers approved by the manuf[...]

50 K Dispose of used batteries in accordance with local regulations. Recycle! Do not dispose of batteries in a fire! Battery Charge Indicator The battery charge indicator on the display shows the approximate level of charge. The indicator consists of a number of bars; the more bars showing, the greater the remaining charge. Non-charging indication [...]

51 REFERENCE INFORMATION LIST OF DISPLAY MESSAGES AUTO PWR OFF Phone is installed in a car kit with ignition sense connected. When ignition is switched off, this message appears, and the phone will switch off automatically in 5 seconds. BATTERY LOW Appears when battery charge is down to approximately 5% of the battery’s capacity, then every 5 min[...]

52 MOVE NAME? Displayed if you are trying to store a name which already exists, or are moving stored contents which include a name. NAM ERROR The NAM contains erroneous data; contact your dealer. NAME? Enter a name (you have selected alpha mode). NAME TOO LONG The name you have entered will not fit completely in the memory location and will be trun[...]

53 RECHARGE BATTERY Appears for 10 seconds before the phone switches off automatically. REPLACE CONTENT? Indicates that the memory location in which you are trying to store is already in use. SECURITY? Enter the security code (default 12345). SILENT Indicates that the ringing tone is switched off (i.e. ‘SILENT SERVICE‘ option is selected). SID [...]

LIST OF TONES Ringing Tone: This denotes an incoming call. The tone volume can be selected using Menu 6, and the ring-tone type can be selected using Menu 2. Keypress Tone: This (single) tone denotes a valid keypress. Re-order Tone: This (triple) tone indicates that your attempt to originate a call was unsuccessful (e.g. the network was busy) or yo[...]

55 CARE AND MAINTENANCE Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fullfill any warranty obligations and to enjoy this product for many years. Keep the phone and all its parts and accessories out of small children's reach. Keep the phone dry. Precipitatio[...]

56 – watch and listen for the low battery warnings; the charge may be too low for the phone to operate. If the power comes on, but the phone does not work: – you may be out of the cellular service area (as denoted by the NO SERVICE message or NO SVC indicator being displayed). – make sure the antenna is fully extended. ACCESSORIES A range of [...]

57 AC Chargers Standard Travel Charger (ACH-3U) This light and compact AC charger is an economical charging option. For the approximate charging time for each of the different types of batteries, refer to ‘Charging the Battery’, page 8. To use the Standard Travel Charger, simply plug it into a standard AC outlet, and connect the lead from the c[...]

58 Compact Desktop Charging Stand (CHH-6F)* The Compact Desktop Charging Stand allows you to charge both the phone and a spare battery. The spare battery will be charged after the phone battery has been charged. The Compact Desktop Charging Stand must be used in conjunction with a charger; use either the Rapid Travel Charger (ACH-4U) or the Rapid C[...]

59 Rapid Cigarette Lighter Charger (LCH-2) You can charge the phone battery from your vehicle’s cigarette lighter using the Rapid Cigarette Lighter Charger. The Rapid Cigarette Lighter Charger plugs into the cigarette lighter socket in your vehicle. Avoid pro - longed charging with the Rapid Cigarette Lighter Charger when the vehicle’s engine i[...]

60 Accessories Accessory Menu (Menu 9) . . . . . . . . . . . . . . . . 38 Booster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Car Radio Mute . . . . . . . . . . . . . . . . . . . . . . . . . 59 Compact Desktop Charging Stand . . . . . . . . . . 58 Fax and Data Accessories . . . . . . . . . . . . . . . . 59 Ignition Sense . . . [...]

61 DTMF Dialing Send DTMF (Menu 17) . . . . . . . . . . . . . . . . . . . 44 Emergency Calls Emergency 9 Key (Menu 13). . . . . . . . . . . . . . . 40 Hook Flash Function . . . . . . . . . . . . . . . . . . . . . . . . . 47 Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Keypad Tones (Menu 5) . . . . . . . . . . . . . [...]

62 Timers Call Timers (Menu 3) . . . . . . . . . . . . . . . . . . . . . 35 Reset Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Volume Controls Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . 12 Keypad Tones (Menu 5) . . . . . . . . . . . . [...]

63 Only Nokia Genuine Accessories give you the kind of performance Nokia phones are famous for. Nokia Genuine Accessories – reliability and quality that’s the best choice for your phone. TECHNICAL INFORMATION Dimensions: 5.8” x 2.1” x .91” Weight: 7.9 oz with battery BTH-8S Transmitting Power: 0.6W +2dB -4dB ERP Operating Voltage: Interna[...]

NOKIA One-Year Limited Warranty Nokia Mobile Phones, Inc. (“NMPI”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of purchase of the Product. 2. The limited [...]

b) The Customer Service Department at NMPI was not notified by Consumer of the alleged defect or malfunction of the Product during the applicable limited warranty period. c) The Product serial number plate or the accessory date code has been removed, defaced, or altered. d) The defect or damage was caused by the defective function of the cellular s[...]

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OF USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING WRITTEN WARRANTY, OTHERWISE, THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NMPI SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIA[...]