NordicTrack NTL15940 инструкция обслуживания

USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL15940 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .nordictrack.co[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that bl[...]

22. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change. [...]

Thank you for selecting the revolutionary NordicTrack ® 4300 R treadmill. The 4300 R treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in t he conve - nience of yo ur ho me. And when you’re not exercising, the unique 4300 R tre admill can be folded up, requiring less than half the[...]

ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver , wire cutters , and rubber mallet . Note: The underside of the treadmill walking belt is co[...]

5. Insert two Handrail Bolts (78) with 5/16” Star Washers (77) into the right Upright (69) and the right Handrail (66) Be careful not to damage the Uprig ht Wire Harness (not shown). Next, lift the right Handrail slightly and align the Handrail Bolts with the holes in the Handrail. (Note: If necessary, twist the Handrail to align the holes in the[...]

OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW T[...]

9 FEATURES OF THE CONSOLE The advanced console offers a selection of fe atures designed to help you get the most from your exercise. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button. As you exercise, the console will display continuous exercise feedback. You can even [...]

10 GETTING STARTED Attach the clip to the waistband of your clothes. Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key i[...]

11 HOW TO USE THE MANUAL MODE Insert the key fully into the console. See GETTING STARTED on page 10. Select the manual mode. When the key is inserted, the manual mode will automatically be selected. If a program has been selected, press the Select Goal b utt on re pea ted ly until the words “MANUAL MODE” appear in the main display. Start the wa[...]

12 number to the other every few seconds; the Pace indicator will light when your pace is shown. When a program is selected, the display will show the time remaining in the program, your current pace, and the time remaining in the current segment of the program. Distance/Laps —The center section of the main display shows the distance that you hav[...]

13 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select the desired preset program. The console offers eleven preset programs—th ree programs that focus on weight loss, five programs designed for aerobic exercise, and three pro- grams for high-performance conditioning. When the key is inserted, [...]

14 If the speed or incline setting is too high or too low during the program, you can manually override the setting by pressing the Speed or Incline but- tons on the console. Every few times one of the Speed buttons is pressed, an additional indi cator will light or darken in the Current Segment col umn. (If any of the columns to the right of the C[...]

15 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal b utt on repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- play. Next, pr[...]

16 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal b utt on repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- pl ay . Next, pre[...]

17 HOW TO USE HEART RATE PROGRAMS Heart rate prog rams automatically adjust the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Note: You must wear the optional chest pulse sensor (see page 24) to use the heart rate programs. Follow the steps below to use a heart rate program. Put on the optional c[...]

18 Press the Start button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program. Hold the hand rails and begin walking. Each heart rate program is divided into several time segm ents of different lengths. (The mai n display s[...]

19 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See this page and page 20 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be connected to your VCR. See page [...]

20 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the [...]

21 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20. A. Plug one end of the audio cable into the[...]

22 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St[...]

23 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 20. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site. Follow the steps[...]

THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information [...]

If you purchase the optional chest pulse sensor, follow the steps below to install the receiver and the short jumper wire included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. While holding the Upper Handrail (123), remove the two 3” Bolts (119) and Handrail Washers (120). 2. Remove the indicated screws from the Con[...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Ho[...]

27 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The powe[...]

28 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench,[...]

29 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

P ART LIST—Model No. NTL15940 R1203A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. 1 2 Frame Pivot Washer 2 8 Endcap Bolt 3 1 Front Endcap (Left) 4 2 Frame Pivot Bushing 5 2 Frame Pivot Bolt 6 2 Frame Pivot Spacer 7 1 Magnet 8 1 Front Roller/Pulley 9 6 Frame Pivot Nut 10 1 Reed Switch/Sensor Wir[...]

ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: • The MODEL NUMBER OF THE PRODUCT (NTL15940) • The NAME OF THE PRODUCT[...]

58 57 27 9 1 13 58 27 27 56 55 55 20 10 27 12 13 9 21 9 32 20 6 5 37 36 126 127 38 33 40 42 41 33 100 100 94 61 109 63 100 94 31 39 75 22 16 132 131 25 131 1 1 1* 133 128 104 124 129 125 9 1 10 105 121 29 122 4 35 5 7 8 60 46 46 54 26 67 3 28 14 53 62 35 47 50 2 52 44 1 14 2 2 15 19 15 19 15 19 1 1 17 1 59 1 12 30 34 44 51 47 43 2 15 19 59 1 12 1 1[...]

85 86 99 17 103 102 123 1 19 120 18 76 76 90 66 90 90 90 90 1 1 89 100 91 92 44 93 99 17 17 99 17 97 98 9 44 93 23 17 68 69 84 80* 77 78 81 40 107 65 107 130 90 90 33 33 90 90 33 90 33 90 90 90 90 90 90 77 78 1 16 90 90 1 15 88 90 99 17 103 102 106* 106* 70 71 74 73 72 95 101 79 79 83 83 82 108 45 45 95 9 101 77 78 1 18 48 99 99 87 27 87 64 49 1 1 [...]

Part No. 206280 R1203A Printed in USA © 2003 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack ® 4300 R treadmill (“Product”) is warranted to be free of all defects in ma- terial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original pur[...]