OKI Microline 321 Turbo инструкция обслуживания

320T_tp.jpg User’s Guide P/N 59270107[...]

2 Microline 32 0/32 1 T urbo | Document Title and Part Number Microline 320/321 T urbo User ’ s Guide P/N 59270107 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guaran[...]

| User’s Guide: English 3 Cont ents Installation ................................................................ 1 9 Installation Hints .................................................................. 1 9 Installation Overview ........................................................... 2 0 Installation Location ................................[...]

4 Microline 32 0/32 1 T urbo | Using Y our Printer ................................................... 3 8 T op of Form (TOF) ................................................................ 3 8 T op of Form (TOF) and Forms T ear-Of f .............................. 3 9 Forms T ear -Of f Status (ON or OFF) .................................... 3 9 Se[...]

| User’s Guide: English 5 T roubleshooting ....................................................... 8 0 General Information ............................................................. 8 0 Internet Support ................................................................. 8 0 List of Problems .......................................................[...]

6 Microline 32 0/32 1 T urbo | Accessories ............................................................... 9 8 Purchasing Accessories ......................................................... 98 Accessories: Part Numbers ................................................... 9 9 Consumables: Part Numbers .............................................. [...]

| User’s Guide: English 7 Helpful Hints This section summarizes the features and capabilities directly connected to saving money and time. Details for these features and capabilities are provided in other sections of this document. Y ou may want to use some of our Helpful Hints when working with your machine. Y our printer has many features and c[...]

8 Microline 32 0/32 1 T urbo | Saving Money Saving Money: Forms T ear-Off The Forms T ear-Of f feature allows a printed page (rear feed, continuous form) to be torn off without wasting paper or adjusting the printer . Forms T ear-Off automatically moves the paper from the initial printing position (print start position) to the tear-off position, af[...]

| User’s Guide: English 9 Saving Time Saving Time: Internet Support Oki Data provides support via the Internet. Oki Data’ s main web site, www .okidata.com, is the gateway to Oki Data’ s products and services. my .okidata.com is a powerful area of Oki Data’ s web site designed to help you personalize the information and service you get from[...]

10 Microline 32 0/32 1 T urbo | The first line prints at the red line of the plastic paper shield (1) on the printhead. The T op of Form and Forms T ear-Off settings of your printer interact. How you set the T op of Form depends on the status of the Forms T ear-Of f menu setting. For more information, refer to “Using Y our Printer , T op of Form [...]

| User’s Guide: English 11 Operation Tip: T urning the Platen Knob ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! Operation Tip: Control Access to the Printer Y ou can control access to the printer by changing the setting for th[...]

12 Microline 32 0/32 1 T urbo | Introduction Thank you for purchasing this printer . This rugged 9-pin printer can meet the needs of harsh and demanding environments. The expanded printhead gap, zero- tear capability , and multiple paper feed paths allow the printer to handle a wide variety of media, including 6-part forms. Y our printer will provi[...]

| User’s Guide: English 13 Printer Features • Super reliable, durable operation: 10,000 hours Mean Time Between Failures (MTBF)! • Expandable head gap for handling forms up to 0.031" (0.79 mm) thick through the bottom feed path using the optional push and/or pull tractor . • Advanced paper handling, with built-in rear push tractor and [...]

14 Microline 32 0/32 1 T urbo | P ar ts Identification The parts identified here are parts of the unit that you will use during normal operation. For accessories (consumables, options, replacement parts, and documentation), refer to “Accessories.” Printer Serial Number The serial number of your machine is on a label on the back of your machine.[...]

| User’s Guide: English 15 Parts Identification: Rear Feed (Continuous Forms) 1 Paper Guides 2 Paper Separator 3 Paper Lever 4 On-Off Switch 5 Platen Knob 6 Control Panel 7 Acoustic Cover 8 Access Cover ! Move the paper lever to the position marked “REAR.” For rear feed, the paper lever is towards the front of the printer . 32T -01c.eps QUIET[...]

16 Microline 32 0/32 1 T urbo | QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP P ar ts Identification: T op F eed (Single-Sheet) 1 Paper Guides 2 Paper Separator 3 Paper Lever 4 On-Off Switch 5 Platen Knob 6 [...]

| User’s Guide: English 17 Front Panel Lights 32T -FP .eps QUIET P ARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 5 ALARM: Glows = error condition exists: • out of paper (no other lights blinking) • paper jam [...]

18 Microline 32 0/32 1 T urbo | Front Panel Keys 32T -FP .eps QUIET P ARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 4 5 6 1 2 3 7 9 8 1 SEL: Selects/deselects printer (printer on-line / off-line). When held on powe[...]

| User’s Guide: English 19 • Y our printer has a grounded, 3-prong plug as a safety feature, and it will only fit into a grounded outlet. If you can not plug it in, chances are that you have an older , non- grounded outlet. Contact an electrician to have it replaced with a grounded outlet. Do not use an adapter to defeat the grounding. • T o [...]

20 Microline 32 0/32 1 T urbo | • If you’re using an extension cord or power strip with the printer , make sure that the total of the amperes required by all the equipment on the extension is less than the extension’ s rating. Generally , the total ratings of all equipment plugged into any one power line should not exceed 15 amperes. Don’t [...]

| User’s Guide: English 21 Customizing the Installation Y our printer has many settings (defaults) that do not need to be adjusted as part of a standard installation. However , you may need to adjust settings to fit your standards. Some settings you may need to adjust as part of your installation are: • T op of Form (TOF) • Paper Path • Pri[...]

22 Microline 32 0/32 1 T urbo | T op of Form (T OF) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top of the page. ! Y[...]

| User’s Guide: English 23 QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 1 2 3 Unpacking the Machine Before you begin, be sure that all the items listed below are included in your package. ! If any items a[...]

24 Microline 32 0/32 1 T urbo | Shipping Restraints 1 Open the access cover (1). Remove the printhead shipping restraint (2) and tape. Turbo-1.eps 2 Grasp the tabs and lift off the paper separator (1). Remove the shipping restraint (2). Turbo-15.eps and Turbo-16.eps 3 Install the paper separator . Turbo-17.eps ! Keep your packing materials and cart[...]

| User’s Guide: English 25 Ribbon Cartridge 1 Make sure the printer is turned OFF . 2 Center the printhead (1). 32T -18.eps 3 If you are replacing the ribbon: swing the front of the cartridge up off the printhead, then lift the cartridge out and discard it. ! Caution! The printhead may be HOT! 32T -19_up.eps 4 Unpack the ribbon cartridge. ! Impor[...]

26 Microline 32 0/32 1 T urbo | Ribbon Cartridge Handling • Leave unused ribbon cartridges in their packages until needed. • When replacing a ribbon cartridge, re-use the packaging to dispose of the old ribbon cartridge. • Be careful when removing the ribbon cartridge. Do not let it touch your clothing or porous materials. The ribbon ink may [...]

| User’s Guide: English 27 Computer Connections Three interface types are available for your printer . • Parallel • Serial (25 pin) • Network (RJ45) Attach the interface cable to the appropriate port on your computer . ! FCC regulations require the use of a shielded cable no longer than 6 ft. (1.8 m). An IEE 1284-compatible parallel cable i[...]

28 Microline 32 0/32 1 T urbo | Power Connections 1 Make sure both the printer and the computer are OFF . 2 Plug the power cord into the back of the printer (1), then into a grounded outlet (2). 59#11.eps and Plugin.eps 3 T urn on the printer . 32T -01A.eps 2 1[...]

| User’s Guide: English 29 Paper Loading Rear Feed, Continuous Forms Use the rear-feed path for printing on single-thickness, continuous-form paper . Use the single-sheet path (top feed) for graphics or charts. ! If you have paper in the paper path, be sure to remove it before installing rear-feed paper . 1 Lock Lever 2 Upper Tractor Cover 3 Pins[...]

30 Microline 32 0/32 1 T urbo | 3 Pull up on the lock levers and open the tractor covers. Then, move the right tractor to fit the width of the paper . 32T -27.eps 4 Place the first two holes in the paper over the tractor pins on either side. Close the tractor covers. 32T -29.eps 5 Move the left tractor to align the edge of the paper with the approp[...]

| User’s Guide: English 31 7 Install the paper separator . Place the wire guide (1) on the pull-up roller assembly (2). 32T -31.eps 8 Press FF/LOAD. The paper feeds into the printer . ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top of the page. T o change the setting, see “Using[...]

32 Microline 32 0/32 1 T urbo | 4 Make sure the wire feed guide (1) is secured in the sheet guide. 32T -33.eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH HSD NLQ UTL SSD 10 12 15 17 20 PROP 5 Adjust the paper feed guides (1) for the width o[...]

| User’s Guide: English 33 Emulations Available Emulations Y our printer has three emulations: • Epson ® FX (ESC/P) • IBM ® Proprinter III (PPSII) — factory setting • OKI DA T A ® MICROLINE ® Standard Changing Emulations 1 Make sure paper is loaded. 2 Press SHIFT + SEL. The printer enters the Menu Mode. 3 Press LF . The following line[...]

34 Microline 32 0/32 1 T urbo | T esting the Printer Running the printer self tests is a good way to check the installation of your printer . The two self tests are: • Font Sample T est • Rolling ASCII T est ! Microline 321 Turbo (wide carriage model) If you are using 8.5 inch paper to run the test, make sure the paper width selection in the pr[...]

| User’s Guide: English 35 F ont Sample T est ! Microline 321 Turbo (wide carriage model) If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer . Refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.[...]

36 Microline 32 0/32 1 T urbo | Rolling AS CI I T est ! Microline 321 Turbo (wide carriage model) If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer . Refer to “Using Y our Printer , Menu Mode, Explanations of Menu [...]

| User’s Guide: English 37 Printer Drivers Selecting Printer Drivers Before you can use your printer , you must select the correct printer driver in your software. If you select the wrong driver , you will see strange characters, incorrect fonts, etc. ! See your software documentation for information on how to select a printer driver . The driver[...]

38 Microline 32 0/32 1 T urbo | T op of Form sets the print start position for the printer . It is adjustable in increments of 1/144 of an inch. The amount of adjustment is limited to avoid paper jams. The first line prints at the red line of the plastic paper shield (1) on the printhead. 32T -18.eps Using Y our Print er 1 T op of F orm (T OF) ! If[...]

| User’s Guide: English 39 T op of Form (T OF) and Forms T ear-Off ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Y our software may print the first line of print above or below where TOF is set. Y ou may need to adjust the TO[...]

40 Microline 32 0/32 1 T urbo | Setting T op of Form, Forms T ear-Off ON (Step A) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Always determine the status of the Forms T ear-Off menu setting BEFORE setting the T op of Form. Re[...]

| User’s Guide: English 41 8 As you continue to hold SHIFT , press the LF / Micro Feed Down (2), or FF/LOAD / Micro Feed Up (3), depending on which direction you want to move the paper to align T op of Form. Press LF / Micro Feed Down to decrease the space (move T op of Form higher). The paper moves down. Press FF/LOAD / Micro Feed Up to increase[...]

42 Microline 32 0/32 1 T urbo | Setting T op of Form, Forms T ear-Off OFF (Step B) ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! Always determine the status of the Forms T ear-Off menu setting BEFORE setting the T op of Form. R[...]

| User’s Guide: English 43 Press LF / Micro Feed Down to decrease the space (move T op of Form higher). The paper moves down. Press FF/LOAD / Micro Feed Up to increase the space (move T op of Form lower). The paper moves up. 32T -FP .eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Mic[...]

44 Microline 32 0/32 1 T urbo | T emporary T op of Form Change ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top of th[...]

| User’s Guide: English 45 Reset T op of Form to Factory Default ! If you turn the platen knob when the printer is turned on, you will cause the T op of Form to mis-align. Always turn the printer off before turning the platen knob! ! The factory default setting for the T op of Form (where the printing should begin) is one inch down from the top o[...]

46 Microline 32 0/32 1 T urbo | F orms T ear-Off ! The status of the Forms T ear-Off menu setting af fects how you set the T op of Form. T o determine the status of the Forms T ear-Off menu setting, refer to “Using Y our Printer , T op of Form, Forms T ear-Off Status (ON or OFF).” For information on setting the T op of Form, refer to “Using Y[...]

| User’s Guide: English 47 Changing the Forms T ear-Off Setting The default setting for Forms T ear-Of f is OFF . 32T -FP .eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down T o change the Forms T ear-Of f setting: 1 Press SEL (1) + SHIFT (2). 2 Press GROUP (3) until one [...]

48 Microline 32 0/32 1 T urbo | Automatic F orms T ear-Off Forms T ear-Off must be set to ON in the menu for Automatic Forms T ear-Of f to occur . Automatic Forms T ear-Off automatically moves the paper from the initial printing position (print start position) to the tear-off position, after a time interval which you select through the menu. The to[...]

| User’s Guide: English 49 Manual Forms T ear-Off Manual Forms T ear-Of f allows you to advance a single page to the tear-off position. Manual Forms T ear-Off works when Forms T ear-Of f is turned off (deactivated in the printer menu). When Forms T ear-Of f is turned on (activated in the printer menu), and you attempt Manual Forms T ear-Off, the [...]

50 Microline 32 0/32 1 T urbo | F orms T ear-Off set ON If you press TEAR (1) when Forms T ear-Of f is turned on (activated in the printer menu), the printer retracts the paper to the T op of Form position. ! Forms T ear-Off CANNOT be used when the optional pull tractor is engaged. 32T -FP .eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GR[...]

| User’s Guide: English 51 Paper Park ! Never park labels! Paper park allows you to print a single sheet (cut-sheet) page without removing continuous feed paper from the printer . Press P ARK (1) to retract rear-feed paper from the paper path. 32T -FP .eps QUIET P ARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT T[...]

52 Microline 32 0/32 1 T urbo | Changing Paper Paths Continuous-forms to single-sheet feed 1 T ear off any printed pages. 2 Press P ARK. 3 Raise the paper separator to the single-sheet feed position. 4 Place the wire feed guide in the paper separator . 5 Move the paper lever to the position marked “TO P .” The paper lever is towards the back of[...]

| User’s Guide: English 53 Printhead Gap The printhead gap is the distance between the printhead and the platen. ! Make sure the printer is turned off before you open the access cover . T o adjust the gap, open the access cover and move the blue lever (1) to the recommended setting from the table. 32T -35.eps Media Setting 12-20 lb paper 1 20-24 [...]

54 Microline 32 0/32 1 T urbo | Expanded Printhead Gap Y our printer can be used for dedicated bottom-feed printing on extra-thick multi-part forms. Extra-thick multi-part forms range from 0.017-inch (0.43 mm) to a maximum of 0.03 inch (0.79 mm). T o print on extra-thick multi-part forms, you engage the expanded printhead gap feature. This expands [...]

| User’s Guide: English 55 5 Swing up the printhead clamp, then remove it by pushing forward (toward the platen) and to the left. 32T -hg01.eps and 32T -hg02.eps CAUTION ATTENTION VORSICHT HOT CHAUD HEISS 55091086 CAUTION ATTENTION VORSICHT HOT CHAUD HEISS 55091086 6 Remove the printhead. 32T -hg03.eps CAUTION ATTENTION VORSICHT HOT CHAUD HEISS T[...]

56 Microline 32 0/32 1 T urbo | 9 Replace the printhead, making sure that the circuit board at the bottom of the printhead firmly engages the slot (1) in the carriage. 32T -hg06.eps ! CAUTION! Be sure the printhead is fully inserted before proceeding. 10 Reinstall the printhead clamp and swing it back over to lock the printhead in place. 32T -hg07.[...]

| User’s Guide: English 57 11 Reinstall the ribbon cartridge. 32T -19dn.eps 12 Replace the pull-up roller assembly and the access cover , then turn the printer on. 32T -04DN.eps and 32T -02.eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down PRINT QUALITY CHARACTER PITCH H[...]

58 Microline 32 0/32 1 T urbo | Print Quality ! Important! Front panel settings for print quality and character pitch are overridden by software commands. The lights will always reflect the printer's state. 32T -FP .eps PRINT QUALITY HSD NLQ UTL SSD Press PRINT QUALITY to select: NLQ: Near Letter Quality • Highest quality , slowest speed •[...]

| User’s Guide: English 59 Super Speed Draft T o use Super Speed Draft (SSD), enter the Menu Mode and make changes as follows: 1 Press SHIFT + SEL. 2 Press GROUP twice. 3 Press SET until DRAFT prints as the setting for the Print Mode. 4 Press ITEM. 5 Press SET (SSD prints). 6 Press SHIFT + SEL to exit Menu Mode and save your changes. Printer Rese[...]

60 Microline 32 0/32 1 T urbo | Character Pitch Press CHARACTER PITCH/RESET to select the width of characters in characters per inch, or Proportional. 32T -FP .eps CHARACTER PITCH 10 12 15 17 20 PROP 10 cpi • Recommended for standard text • Not available for SSD 12 cpi • Recommended for standard text • Y ields more text per page 15 cpi • [...]

| User’s Guide: English 61 QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down 1 GROUP: Prints the next Group in the Menu. W ith the SHIFT key , prints the previous Group. 2 ITEM: Prints next Item in the Group. W ith the SHIFT key , prints previous Item in the Group. 3 SE T : [...]

62 Microline 32 0/32 1 T urbo | Entering and Exiting Menu Mode T o enter or exit the Menu Mode, hold SHIFT while pressing SEL. Moving Through the Menu When the printer is in Menu Mode, you can move forward or backwards through the menu. Moving Forward T o move forward, press GROUP , ITEM, or SET , whichever is appropriate. For more information, ref[...]

| User’s Guide: English 63 Resetting Menu to Factory Defaults ! AL W A YS print the current Menu Mode settings before you reset or change the Menu settings. Printing the settings is the only way to have a record of the settings. T o print the Menu Mode Settings, refer to “Using Y our Printer , Menu Mode, Printing the Menu Settings.” T o reset[...]

64 Microline 32 0/32 1 T urbo | Changing the Menu Settings ! AL W A YS print the current Menu Mode settings before you reset or change the Menu settings. Printing the settings is the only way to have a record of the settings. T o print the Menu Mode Settings, refer to “Using Y our Printer , Menu Mode, Printing the Menu Settings.” 1 Press SHIFT [...]

| User’s Guide: English 65 Group Item Settings (Defaults are set in bold italic) Printer Control Emulation Mode IBM PPR , EPSON FX, ML Font Print Mode Utility , NLQ Courier , NLQ Gothic, Draft Draft Mode HSD , SSD Pitch 10 cpi , 12 cpi, 15 cpi, 17.1 cpi, 20 cpi Proportional Spacing No , Y es Style Normal , Italics Size Single , Double Symbol Sets[...]

66 Microline 32 0/32 1 T urbo | Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic . Some groups or entries [...]

| User’s Guide: English 67 Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic . Some groups or entries wil[...]

68 Microline 32 0/32 1 T urbo | Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic . Some groups or entries [...]

| User’s Guide: English 69 Menu Settings T able (Continued) For a complete explanation of each menu item, refer to “Using Y our Printer , Menu Mode, Explanations of Menu Items.” The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic . Some groups or entries wil[...]

70 Microline 32 0/32 1 T urbo | Explanations of Menu Items Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. 7 or 8 Bits Data W ord (ML). If your computer system uses seven bits to make up each unit of data, change this setting to 7. 7 or 8 Bit Graphics (ML). Choose the graphics your system [...]

| User’s Guide: English 71 Explanations of Menu Items (Continued) Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. Page Length. Selects the length of the paper you are using. Page Width (Wide Carriage only). Change to 8" to print on letter-size paper . Paper Out Override. Senses when[...]

72 Microline 32 0/32 1 T urbo | Explanations of Menu Items (Continued) Refer to “Using Y our Printer , Menu Mode, Menu Settings T able” for an overview of the menu structure. Print Suppress Effective. If your system uses the DC1 and DC3 codes for something other than the print suppress mode, change the setting to No. Proportional Spacing. Chang[...]

| User’s Guide: English 73 Maint enance Replacing the Ribbon Cartridge If you need instructions for replacing the ribbon cartridge, you can refer to the • packaging of the new cartridge • web site • “Installation, Ribbon Cartridge.” For the best results, use genuine OKI ribbons. For information on obtaining consumables, refer to “Acce[...]

74 Microline 32 0/32 1 T urbo | Printer Cleaning Y ou should clean the printer every six months (or after about 300 hours of operation). ! Never use solvents or strong detergents on the cabinet: they could cause damage. 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer . 2 Open the access cover . Remove the pu[...]

| User’s Guide: English 75 Paper Jams Rear-Feed Paper Jams 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer . 32T -01B.eps and 32T -37BK.eps A ! Make sure the printer is turned off before you open the access cover . 2 Open the access cover . Remove the pull-up roller assembly . 32T -04UP .eps[...]

76 Microline 32 0/32 1 T urbo | 3 Remove any torn pieces of paper . 4 Grasp the tabs and lift off the paper separator . Load paper . 32T -23A.eps 5 Install the paper separator . Install the pull-up roller assembly . Close the access cover . 32T -23A.eps and 32T -04DN.eps 6 T urn on the printer . 32T -01a.eps 7 Press FF/LOAD. FF .eps FF/LOAD ITEM Mi[...]

| User’s Guide: English 77 Rear-Feed, Repeating Paper Jams If the paper keeps jamming, you probably have bits of paper stuck in the paper path. 1 T urn off the printer . Then, use the platen knob to back the paper out of the printer . 2 Open the access cover . Remove the pull up roller assembly . Remove any torn pieces of paper . 32T -04up.eps 3 [...]

78 Microline 32 0/32 1 T urbo | 6 Remove any paper pieces. Then, use the platen knob to back the paper out. 32T -42R.eps 7 Load regular paper . Install the paper separator . 32T -23A.eps 8 Install the pull-up roller assembly . Close the access cover . 32T -04DN.eps 9 T urn on the printer . 32T -01A.eps 10 Press FF/LOAD. FF .eps FF/LOAD ITEM Micro F[...]

| User’s Guide: English 79 4 Remove any torn pieces from around the carriage. 5 Install the pull-up roller assembly . Close the access cover . 32T -44Dn.eps 6 T urn on the printer . Load paper . 32T -01A.eps and 32T -15.eps QUIET PARK TEAR FF/LOAD LF SEL SEL POWER ALARM MENU GROUP EXIT ITEM SET PRINT MENU SHIFT TOF Micro Feed Up Micro Feed Down P[...]

80 Microline 32 0/32 1 T urbo | T roubleshooting General Information Here are some general things to check before proceeding with detailed troubleshooting. • Is the printer plugged in and turned on? • Are the connections (power and interface) secure? • Is the product being operated under the proper ambient conditions? • Does the paper being[...]

| User’s Guide: English 81 List of Problems Problem 1: My word processor files do not print the way I have the menu and front panel set. Problem 2: Nothing happens when I turn on the printer . Problem 3: The printer does not print when the computer sends data. Problem 4: I'm getting strange symbols, incorrect fonts, etc., when I try to print[...]

82 Microline 32 0/32 1 T urbo | Problem 1: My word processor files do not print the way I have the menu and front panel set. Solution: Always remember that: 1 Settings in your software application will override any settings in your printer driver . 2 Y our printer driver settings will override any settings from the printer menu or printer front pan[...]

| User’s Guide: English 83 Problem 2: Nothing happens when I turn on the printer . Solution: Check the power cord connection to the outlet. If you are using a power strip, make sure it is turned on, and that a fuse hasn’t blown or that a circuit breaker hasn’t tripped. Problem 3: The printer does not print when the computer sends data. Soluti[...]

84 Microline 32 0/32 1 T urbo | Problem 5: Ink smears on the paper when I print on narrow forms. Solution: This may be caused by excessive printhead travel from the centering position. Enter the Menu and set the Centering Position to MODE 1. Refer to “Using Y our Printer , Menu Mode.” For the wide-carriage printer , if MODE 1 doesn't work,[...]

| User’s Guide: English 85 Problem 9: The ALARM light is on and the Character Pitch 15 light is flashing. Solution: This indicates a paper jam. Press the SEL key and correct the paper jam situation. Refer to “Maintenance, Paper Jams.” Problem 1 0: The printer needs paper , but the ALAR M light is not on and I cannot load the paper . Solution:[...]

86 Microline 32 0/32 1 T urbo | Specifications Characters per Line (cpl) Setting ML320 Turbo ML321 Turbo 10 cpi 80 cpl 136 cpl 12 cpi 96 cpl 163 cpl 15 cpi 120 cpl 204 cpl 17.1 cpi 137 cpl 233 cpl 20 cpi 160 cpl 272 cpl Emulations Epson FX (ESC/P) IBM Proprinter III(PPSII) Oki Data Microline Standard co-resident Interface Standard: Centronics paral[...]

| User’s Guide: English 87 Graphics Resolution Emulation Maximum Resolution Epson/IBM 240 (H) x 216 (V) dpi OKIDA T A 288 (H) x 144 (V) dpi Resident Fonts Print Quality A vailable Fonts Near Letter Quality Courier , Gothic Utility Gothic High Speed Draft Gothic Super Speed Draft Gothic Resident Scalable Fonts* Courier and Gothic, in sizes from 22[...]

88 Microline 32 0/32 1 T urbo | Paper Specifications Microline 320 T urbo Paper T ype: Cut Sheet Feed: To p W eight: 14-24 lb. (52.5-90 g/m 2 ) Width Range: 7.2" to 8.5" (182.8 to 215.9 mm) Paper T ype: Single-part, continuous forms Feed: Rear , Bottom W eight: 12-24 lb. (45-90 g/m 2 ) Width Range: 3" to 10" (76.2 to 254 mm) Pap[...]

| User’s Guide: English 89 Paper Specifications Microline 321 T urbo Paper T ype: Cut Sheet Feed: To p W eight: 14-24 lb. (52.5-90 g/m 2 ) Width Range: 7.2" to 14.3" (182.8 to 363.2 mm) Paper T ype: Single-part, continuous forms Feed: Rear , Bottom W eight: 12-24 lb. (45-90 g/m 2 ) Width Range: 3" to 16" (76.2 to 406.4 mm) Pap[...]

90 Microline 32 0/32 1 T urbo | Paper Thickness Rear Feed 0.014" (0.36 mm) maximum Bottom Feed* 0.017" (0.43 mm) maximum expandable to 0.031" (0.79 mm) maximum * Requires optional push or pull tractor . Printer Dimensions Width x Depth x Height ML320 T urbo 15.7 x 13.6 x 4.6 inches 389 x 355 x 116 mm ML321 T urbo 21.7 x 13.6 x 4.6 in[...]

| User’s Guide: English 91 Service and Suppor t General Information Oki Data offers service and support to you through a variety of methods. Please chose the service and support method that is best for you. Oki Data’ s service and support methods are: • the documentation provided with your machine • the store location where you purchased yo[...]

92 Microline 32 0/32 1 T urbo | Documentation The documentation provided with your machine provides an excellent reference for the day-to-day operation of your machine. The documentation included with your machine is: • User ’ s Guide, on line, provided on the CD • Microline Reference Manual, on line, provided on the CD • Quick Start • W [...]

| User’s Guide: English 93 my .okidata.com Y our Personal Solutions Center my .okidata.com is a powerful area of Oki Data’ s web site designed to help you personalize the information and service you get from Oki Data. When you register for my .okidata.com, you • personalize the web-based support for the OKI products you own: 24 hours a day , [...]

94 Microline 32 0/32 1 T urbo | T elephone Suppor t Oki Data Customer Information System Information System Automated Attendant 1-800-654-3282 (1-800-OKI-DA T A) T oll Free in the U.S. and Canada For quick answers to commonly-asked questions, the Oki Data Information System Automated Attendant is available 24 hours a day , 7 days a week. The system[...]

| User’s Guide: English 95 Service Centers Authorized Service Providers Oki Data has over 2,000 local Authorized Service Providers in North and South America. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers: • Consult our web site at www .okidata.com • In the U.S. and Canada, call 1-800-654-3282 (1-800-OK[...]

96 Microline 32 0/32 1 T urbo | Service and Support: United States and Canada Oki Data is firmly committed to the satisfaction of our customers. If you have problem that your customer documentation cannot solve, contact the listed sources for service or support. Sales and Service Dealers: United States and Canada Consult the store location where yo[...]

| User’s Guide: English 97 Service and Support: Latin America Oki Data is committed to offer the best customer support possible to our customers. In the instance of having a difficult problem with your OKI product, please contact any of the OKI- CAS (Centro Autorizado de Servicio) shown on our W eb site, www .okidata.com . Sales and Service Cente[...]

98 Microline 32 0/32 1T urbo | Accessories • Consult the dealer where your purchased your machine. • Locate an Authorized Oki Data Reseller by visiting one of these web sites - http://my .okidata.com Allows you to register your product and personalize your own support needs - http://www .okidata.com Provides general information • In the Unite[...]

| User’s Guide: English 99 32T -20.bmp 32T -PT01.eps 32T -PT52.eps 32T -rps.tif and 32TCSF02.eps Accessories: Part Numbers Consumables: Part Numbers Consumable Part Number Ribbon Cartridge (1) ----------------------------------- 52102001 Options: Part Numbers Option Part Number Model ML320T Pull T ractor, T op-Mount (2) --------------------------[...]

100 Microline 3 20/3 21T urbo | 32T -Knob.tif and PowrCord.eps 32T -Head.tif and 32T -Rolr.tif Replacement Parts: Part Numbers Replacement Part ------------------------------------- Order No. Access Cover , ML320T (1) ---------------------------- 53076701 Access Cover , ML321T (1) ---------------------------- 53076801 Acoustic Cover , ML320T (2) --[...]

| User’s Guide: English 101 Print er Control Codes ! The Microline Reference Manual is ONLY available in American English. This section lists the most commonly used printer control codes. The Microline Reference Manual provides complete lists of all the commands, along with information on their use. Y ou may view this document by: • accessing t[...]

102 Microline 3 20/3 21T urbo | Epson FX Commands Epson Command ASCII Decimal Backspace B S 8 Carriage Return, Execute CR 1 3 Character Pitch Select 10 cpi ESC P 27 80 Select 12 cpi ESC M 27 77 Select 15 cpi ESC g 27 103 Select Condensed Print ESC SI, or SI 27 15, or 15 Cancel Condensed Print DC2 1 8 Delete D EL 1 2 7 Double Height On ESC w 1 27 11[...]

| User’s Guide: English 103 Epson FX Commands (Continued) Epson Command ASCII Decimal Paper Out Sensor Off ESC 8 27 56 Paper Out Sensor On ESC 9 27 57 Print Quality/Font Select HSD/SSD, depending on Menu setting for Draft Mode ESC ( 0 27 40 48 Select NLQ ESC x 1 27 120 49 Select Courier (NLQ only) ESC k 0 27 107 48 Select Gothic (NLQ only) ESC k [...]

104 Microline 3 20/3 21T urbo | IBM Command ASCII Decimal Form Length, n inches (n = 1 to 22) ESC C NUL n 27 67 0 n Form Length, n lines (n = 1 to 255) ESC C n 27 67 n Horizontal T ab, Execute H T 9 Italics On ESC % G 27 37 71 Italics Off ESC % H 27 37 72 Line Feed, Execute w/ Carriage Return L F 1 0 n/144" (n = 1 to 127) ESC % 5 n 27 37 53 n [...]

| User’s Guide: English 105 IBM Proprinter III Commands (Continued) IBM Command ASCII Decimal Stop Printing ESC j 27 106 Subscript On ESC S 1 27 83 49 Superscript On ESC S 0 27 83 48 Subscript/Superscript Off ESC T 27 84 T op of Form, Set at Current Position ES C 4 27 52 Underline Printing On ESC - 1 27 45 49 Underline Printing Off ESC - 0 27 45 [...]

106 Microline 3 20/3 21T urbo | Oki Data MICROLINE Standard Commands Oki Data Command ASCII Decimal Enhanced Printing On ESC H 27 72 Enhanced Printing Off ESC I 27 73 Form Feed F F 1 2 Horizontal T ab, Execute H T 9 Italic On ESC ! / 27 33 47 Italic Off ESC ! * 27 33 42 Line Feed Commands w/ Carriage Return L F 1 0 w/o Carriage Return ESC DC2 27 18[...]

| User’s Guide: English 107 Oki Data MICROLINE Standard Commands (Continued) Oki Data Command ASCII Decimal Underline Printing On ESC C 27 67 Underline Printing Off ESC D 27 68 Uni-Directional Print On ESC - 27 45 Uni-Directional Print Off ESC = 27 61 V ertical T ab, Execute V T 1 1 Oki Data Command ASCII Decimal Paper Out Sensor Off ESC E 1 27 6[...]

108 Microline 32 0/32 1 T urbo | W arranty , Regulatory , and Safety Information Limit ed W arranty: United Stat es and Canada Oki Data Americas, Inc. (Oki Data) warrants this printer to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited W arranty . This Limited W arranty does not [...]

| User’s Guide: English 109 THERE ARE NO EXPRESS W ARRANTIES OTHER THAN THOSE ON THE F ACE HEREOF AND DESCRIBED ABOVE. NO W ARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED T O, ANY IMPLIED W ARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A P AR TICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE W ARRANTY PERIOD DESCRIBED ABOVE OF [...]

110 Microline 32 0/32 1 T urbo | Limited W arranty: Latin America Oki Data warrants this printer (hereinafter Product) to be free in defect in material and workmanship and will remedy any such defect according to the terms of this Limited W arranty . This Limited W arranty does not extend to consumable items, including but not limited to ribbon car[...]

| User’s Guide: English 111 Service and Support: United States and Canada Oki Data is firmly committed to the satisfaction of our customers. If you have a problem that your customer documentation cannot solve, contact the listed sources for service or support. Sales and Service Dealers: United States and Canada Consult the store location where yo[...]

112 Microline 32 0/32 1 T urbo | T elephone Support: United Stat es and Canada Oki Data Customer Information System Customer Support Professionals 1-800-654-3282 (1-800-OKI-DA T A) T oll Free in the U.S. and Canada Customer Support Professionals are available 24 hours a day , 7 days a week. Please be sure that you are calling from a telephone close[...]

| User’s Guide: English 113 Service and Support: Latin America Oki Data is committed to offer the best customer support possible to our customers. In the instance of having a difficult problem with your OKI product, please contact any of the OKI- CAS (Centro Autorizado de Servicio) shown on our W eb site, www .okidata.com. Sales and Service Cente[...]

114 Microline 32 0/32 1 T urbo | Oki Data on the Internet www .okidata.com Y our Gateway to OKI Pr oducts and Services www .okidata.com is Oki Data’ s web site. It provides general information about all of the OKI products and services available to you. Y ou can use our web site to • get W eb-based support for all OKI products: 24 hours a day ,[...]

| User’s Guide: English 115 Oki Data Service Centers Oki Data Authorized Service Providers Oki Data has over 2,000 local Authorized Service Providers in North and South America. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers: • Consult our web site at www .okidata.com • In the U.S. and Canada, call 1-800[...]

116 Microline 32 0/32 1 T urbo | Material Safety Data Sheet (MSDS) F or Black Ribbon, P/N 52 102 00 1 MSDS #5 806480 1 Current as of March 1, 200 1 For more information, contact Oki Data at: 2000 Bishops Gate Boulevard Mount Laurel, NJ 08054-4620 Emergency Information: MSDS United States and Canada 1-800-654-3282 (1-800-OKI-DAT A) English only Lati[...]

| User’s Guide: English 117 Hazardous Ingredients Carbon Black CAS# 1333-86-4 OSHA PEL 3.5 mg/m 3 ACGIH TL V 3.5 mg/m 3 Coloring Material CAS# N/A OSHA TW A N/A ACGIH TL V N/A Oil CAS# N/A OSHA TW A N/A ACGIH TL V N/A Additives CAS# N/A OSHA TW A N/A ACGIH TL V N/A Nylon 6-6 Fabric CAS# N/A OSHA TW A N/A ACGIH TL V N/A PSM Fiber CAS# N/A OSHA TW [...]

118 Microline 32 0/32 1 T urbo | Physical Data Melting Point: N/A Boiling Point: N/A V apor Pr essure: N/A V apor Density (Air = 1): N/A Evaporation Rate (Butyl Acetate = 1): N/A Specific Gravity (H 2 O=1): No data available Solubility in W ater: No data available Appearance and Odor: Nylon 6-6 fabric impregnated with liquid black ink Fire and Expl[...]

| User’s Guide: English 119 Spill Cleanup and Disposal Spill Cleanup If the ribbon is inadvertently pulled out, it should be rewound on the reel using the take-up knob. W aste Disposal Follow appropriate federal, state and local regulations. Safe Handling and Use Respiratory Protection: N/A Protective Gloves and/or Eye Protection: Not normally re[...]

120 Microline 32 0/32 1 T urbo | Safety Information Y our OKI printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer: • Carefully read all setup and operating instructions. Be sure to [...]

| User’s Guide: English 121 • Do not poke anything into the ventilation slots on the sides of the printer . Y ou could get a shock or cause a fire. • Aside from the routine maintenance described in this document, don’t try to service the printer yourself. Opening the cover may expose you to shocks or other hazards. Don’t make any adjustme[...]

122 Microline 32 0/32 1 T urbo | Federal Communications Commission (FCC) FCC Radio Frequency Interference Statement for 1 20-V olt Models W ARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against [...]

| User’s Guide: English 123 FCC Radio Frequency Interference Statement for 23 0/240-V olt Models W ARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial en[...]

124 Microline 32 0/32 1 T urbo | European Union Council of the European Communities Statement of Electromagnetic Conformance for 230/ 240-V olt Models This product complies with the requirements of the Council Directive 89/336/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility . Statement of Safety C[...]

| User’s Guide: English 125 Index Symbols 0 character (slashed, unslashed) 65, 72 10 cpi (Front Panel Light) 17, 60 12 cpi (Front Panel Light) 17, 60 120 volt printer 90 15 cpi (Front Panel Light) 17, 60 17 cpi (Front Panel Light) 17, 60 20 cpi (Front Panel Light) 17, 60 230 or 240 volt printer 90 300 cps (UTL) 86 390 cps (HSD) 86 435 cps (SSD) 8[...]

126 Microline 32 0/32 1 T urbo | C Cable Length 27 Parallel 27 Serial Interface 27 Shielded 27 Canada Customer Support 112 Locating a service center 115 Service 94, 96, 111 Service Center (Oki Data) 95, 115 W arranty 108 Canadian French 65, 70 Carbon Forms 53 Carbonless continuous forms 88, 89 Cardstock 88, 89 Expanded printhead gap 54 Centering 68[...]

| User’s Guide: English 127 D Danish (Language) 65 Data W ord 70 7 bit 68 8 bit 68 DC1 code 72 DC3 code 72 DEL Code 71 Depth of printer 90 Detergent, cleaning the housing 74 Documents, Print Quality 58 Draft Draft Mode 65, 86 Print Quality 58 Draft Mode Saving money with 8 Saving time with 9 Drivers Diskette 37 Oki Data W eb Site 37 Operating Sys[...]

128 Microline 32 0/32 1 T urbo | Forms Continuous Carbonless 88, 89 Interleaf 88, 89 Single-part 88, 89 Multipart and Printhead Gap 53 Narrow width 84 Thick 54 Thickness ranges 13 Zero-T ear 13 Forms T ear-Off 71 Automatic 48 Bottom Feed 66 Changing 47 Forms T ea r-Of f OFF TEAR key 50 T op of Form 42 Forms T ea r-Of f ON TEAR key 50 T op of Form 4[...]

| User’s Guide: English 129 H Height Double height printing 72 of Printer 90 Help. See Service and Support High Speed Draft HSD Front Panel Light 17 Mode 13, 86, 87 Print Quality 58 Humidity Operating 90 Storage 90 I I-Prime 69, 71, 82 IBM IBM 437 70 IBM 850 70 IBM 860 70 IBM 863 70 IBM 865 70 IBM Emulation 33 IBM PPR 65 IBM Proprinter III 86 IBM[...]

130 Microline 32 0/32 1 T urbo | L Labels 88, 89 Paper Park 51 Printhead Gap Setting 53 Language 65, 71 Latin America Customer Support 113 Language 65 Locating a service center 95, 115 Service 97 W arranty 110 Length, Page Bottom Feed 66 Control, T op Feed 67 Rear Feed 66 T op Feed 67 Letterhead 31 LF , Front Panel key 18 Lights, Front Panel 17 Lim[...]

| User’s Guide: English 131 N Near Letter Quality 58 NLQ 86, 87 NLQ Front Panel Light 17 Norwegian 70 Code Page 65 Language 65 O Off-line, SEL key 18 Oki Data Contact Information e-mail 2 Latin America 95 mailing address 2 telephone 94, 95, 98, 112 Microline Commands 106, 107 Microline Emulation 33, 86 Service Centers 95, 115 W eb Site 2, 113, 11[...]

132 Microline 32 0/32 1 T urbo | Paper Feed Continuous to single-sheet feed 52 Cut Sheet Feeder (Option) 99 FF/LOAD key 18 LF key 18 P ARK key 18 QUIET key 18 Roll Paper Stand (Option) 99 Single-sheet to continuous-feed 52 Switching feed paths 52 TEAR key 18 Paper Jams 85 ALARM glows, 15 cpi blinks 17 Continuous feed 85 Rear Feed 75 Rear Feed, repe[...]

| User’s Guide: English 133 Print Registration 67, 71 Forms T ear-Of f 46, 47, 48 Shift left 67 Shift right 67 Print Server Option 99 Print Size 86 Smallest 60 Standard 60 Print Speed 13, 86 High (HSD) 58 Highest (SSD) 58 Medium (UTIL) 58 Selecting 71 Slowest (NLQ) 58 Print Start Position Reset to factory default position 45 T emporary adjustment[...]

134 Microline 32 0/32 1 T urbo | Productivity . See Money , Saving; Time, Saving Proof of Purchase 96 PROP characters per inch (cpi) 60 Front Panel Light 17 Proportional Spacing 60, 65, 72 Proprinter III Commands 104 Publisher (Language Set) 65 Pull Tractor 13, 53, 90, 99 Pull-Up Roller Assembly 100 Push Tractor 13, 53, 90, 99 Q QUIET Front Panel K[...]

| User’s Guide: English 135 S Safety , General Information 120 Saving Money . See Money , Saving Saving Time. See Time, Saving Security Controlling access to the printer 11 SEL Front Panel Key 18 Front Panel Light Flashes 17 Lit 17 Not Lit 17, 83 Self T ests 34 Serial Interface Option 83, 99 Serial Number 14 Server Print Server (Option) 99 Servic[...]

136 Microline 32 0/32 1 T urbo | SSD Front Panel Light 17, 86, 87 Standard Character Set 65, 70 Static charges and paper 85 Stationery 31 Super Speed Draft 13, 58, 59, 70 Support 91 Documentation 92 General Information 91 Internet Support 12, 93 Purchase Location 92 T elephone Support 94 Swedish (Language) 65 Symbol Sets 65, 71 T T ake-up Knob (Rib[...]

| User’s Guide: English 137 Troubleshooting Aborting print jobs 67, 72, 87 ALARM flashing 17, 84 ALARM lit 17 ALARM lit, 10 cpi flashing 17, 84 ALARM lit, 15 cpi flashing 17, 85 ALARM lit, no other lights 17 Alignment problems 11 Can't load paper 85 Character Pitch Indicator Lights 17 Data loss 70, 71, 72 Embedded Printer Commands 83 Emulati[...]

138 Microline 32 0/32 1 T urbo | U Uni-directional printing, graphics 67 United States Customer Support 112 Locating a service center 115 Service 94, 96, 111 Service Center (Oki Data) 95, 115 W arranty 108 Unpacking your printer List of contents 23 UPC A 87 UPC E 87 USA 65, 70 UTIL (Front Panel Light) 17, 86, 87 Utility Utility Mode Print Quality 5[...]