Onkyo AVX-280 инструкция обслуживания

5.1ch Home Theater System A VX-280 A V Receiver (HT -R280) Speaker P ackage (HTP-380) Front Speak ers (SKF-380 L/R) Center Speaker (SKC-380) Surround Speak ers (SKR-380 L/R) Subw oofer (SKW -380) Instruction Manual Thank you for purchasing an Onkyo 5.1ch Home Theater System. Please read this manual thoroughly before making connections and plu gging[...]

2 En Introduction Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not[...]

3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted ma terial is ille gal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user-ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler . 3. Care —Occasionally you should dust th [...]

4 En Speaker Precautions Placement • The subwoofer cabinet is ma de out of wood and is there- fore sensiti ve to e xtreme temperatures and humidity , do not put it in locations subjec t to direct sunlight or in humid places, such as near an air con ditioner , humidifier , bathroom, or kitchen. • Do not put water or other liquids close to the sp[...]

5 En Installing the Batte ries Note • If the remote controller doesn’ t work reliably , try replacing the batteries. • Don’t mix new and old batteries or diff erent types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leak- age or corrosion. • Remove e xpired b[...]

6 En Features A V Receiver HT-R280 • 110 W atts/Channel @ 6 ohms • Optimum Gain V olume Circuitry • H.C.P .S. (High Current Po wer Supply) Massiv e High Po wer T ransformer • HDMI (V er.1.4 with Audio Re turn Channel, 3D), Deep- Color , x.v .Color * , Lip Sync, DTS *1 -HD Master Audio, DTS-HD High Resolution Audio, Dolby T rueHD *2 , Dolby [...]

7 En Fr ont & Rear P anels The actual front panel has v ari ous logos printed on it. They are not sho wn here for clarity . The page numbers in pa rentheses show where you can fi nd th e main explanation for each item. a ON/ST ANDBY button ( ➔ 20 ) b ST ANDBY indicator ( ➔ 20 ) c HDMI THRU indicator ( ➔ 35 ) d SPEAKERS A and B buttons ( ?[...]

8 En For detailed information, se e th e pages in parentheses. a A and B speaker indicators ( ➔ 11 , 22 ) b A udio input indicators c Listening mode and format indicators ( ➔ 21 , 26 ) d T uning indicators ( ➔ 23 ) e SLEEP indicator ( ➔ 22 ) f MUTING indicator ( ➔ 22 ) g Message area a DIGIT AL IN CO AXIAL and OPTICAL jacks b COMPONENT VI[...]

9 En Speaker P ac kage a Speaker terminals These push terminals are for connecting the speaker to the HT-R280 with the supplied speaker cables. The supplied speaker cables are color -coded for easy identif ication. Simply connect each cable to the same- colored positi ve speak er terminal. b Keyhole slots These ke yhole slots can be used to w all-m[...]

10 En Remote Contr oller For detail ed information, se e the pages in parentheses. a ON/ST ANDBY button ( ➔ 20 ) b REMO TE MOD E / INPUT SELECT OR buttons ( BD/D VD , VCR/DV R , CBL/SA T , GAME , AU X , TUNER , TV/CD and PORT ) ( ➔ 21 ) c TO N E , + and – buttons ( ➔ 35 ) d SP A/B button ( ➔ 11 , 22 ) e Arrow q / w / e / r and ENTER butto[...]

11 En About Home Theater Y ou can use two sets of speake rs with the A V recei ver: Speak ers A and Speakers B . Speakers A should be used in your main listeni ng room for up to 5.1-channel playback. * While Speakers B is on, Speakers A is reduced to 2.1- channel playback. Speakers B can be used in another room and offers 2-channel stereo playback.[...]

12 En Connections Connecting the A V Receiver Speaker Configurat ion The follo wing table indicate s the channels you should use depending on the number of speakers that you hav e. For 5.1-channel surround-sound playback, you need 5 speakers and a po wered subwoofer . No matter how man y speaker s you use, a po wered sub- woofer is recommended for [...]

13 En Connecting the Sp eaker Cables Screw-type speaker termi nals Using Banana Plu gs • If you are using banana plugs, tighten the speak er terminal before inserting the banana plug. • Do not insert the speaker code directly in to the center hole of the speaker terminal. Push-type speaker terminals The follow ing illustration shows which speak[...]

14 En The speakers can easily be wa ll mounted b y using the ke y- hole slots. T o prev ent the speaker from vibrating ag ainst the wall, attach tw o of the supplied thick rubber stopp ers to the rear of each speaker . T o mount the front or surround speakers v e rtically , use the key hole slot shown to hang each speaker on a scre w that’ s secu[...]

15 En Connected ima g e with A V components • Before making any A V connections, read th e manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve comp leted and double-checked all A V connections. • Push plugs in all the way to mak e good connecti ons (loose connecti ons can cause noise or malfunc- tions)[...]

16 En Connect your components to the appropr iate jack s. The default input assi gnments are shown belo w . ✔ : Assignment can be changed ( ➔ 30 ). Refer to “ About HDMI” ( ➔ 51 ) and “Using an RIHD-comp atible TV , Player , or Recorder” ( ➔ 52 ). ■ A u dio return channel (ARC) function Audio return channel (ARC) function enables [...]

17 En Connect your components to th e appropriate jacks. The default input assignments are sho wn below . ✔ : Assignment can be changed ( ➔ 30 ). ■ How to recor d the video W ith the connections descri bed here, you cannot record the video through the A V rece iver. T o make a connection for video recording ( ➔ 25 ). *1 Connect a turntable [...]

18 En W ith u (Remote Interacti ve), you can use the following special functions: ■ System On/A uto P ower On When you start playback on a component connected via u , if the A V receiv er is on Sta ndby , it will automati- cally turn on and select th at component as the input source. ■ Direct Change When playback is started on a component conne[...]

19 En The A V receive r supports sev eral connection formats for comp at ibility with a wide range of A V equipment. The format you choose will depend on the fo rmats supported by your components. Use the follo wing sections as a guide. Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 5[...]

20 En T ur ning On & Basi c Operations T urning On/Off the A V Receiver T urning On Press ON/ST ANDBY on the fr ont panel. or Press RECEIVER follo we d by ON/ST ANDBY on the remote contr oller . The A V receiver comes on, the display lights, and the ST ANDBY indicator goes of f. T urning Off Press ON/ST ANDBY on the fr ont panel or the remote c[...]

21 En Basic Operations ■ Operating on the A V receiver ■ Operating with the remo te contr oller Note • The maximum master volume le vel is affected by the subw oofer volume le vel. Y ou can display va rious info rmation about the current input source as follows. (Components connected to the UNIVERSAL PORT jack are excluded. ) Tip • Alternat[...]

22 En Y ou can temporarily mute the output of the A V receiv er. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute function is ca ncelled when the A V receiver is set to Standb y . W ith the sleep timer, you can set the A V recei ver to turn off aut omatically after a specified peri od. Tip • If you need to cancel the slee[...]

23 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection. Y ou can change the frequency steps ( ➔ 33 ). Listening to th e Radio T uning into Radio Stations ■ Auto tuning mode When tuned into a station, the TU NED indicator lights. When tu[...]

24 En Y ou can store a combination of up to 40 of your favorite FM/AM radio stations as presets. Selecting Presets Tip • Y ou can also use the remote controller’s number b uttons to select a preset directly . Deleting Pres ets Presetting FM/AM Stations 1 T une into the FM/AM station that you wa nt to store as a pr eset. See the previous section[...]

25 En Recor ding This section explains ho w to record the selected input source to a component with recording capa bility , and how to record audio and video from different sources. Connecting a Recor ding Component Note • The A V receiver must be turned on for recording. Recording is not possible while it’ s in Standby mode. • If you want to[...]

26 En Using the Listening Modes See “ About Listening Modes” for detailed information about the listening modes ( ➔ 26 ). Listening Mode Buttons MO VIE/TV button This butto n selects the listening modes intended for use with movies and TV . MUSIC button This butto n selects the listening modes intended for use with music. GAME button This but[...]

27 En ■ Speaker Lay o ut The illustration sho ws which speakers are acti vated in each channel. See “Sp Conf ig (Speaker Configuration)” for the speaker setup ( ➔ 31 ). Listening Mode s Listening Mode Description Input Source Speaker Layo u t Direct In this mode, au dio from the inpu t source is output withou t surround-sound process- ing. [...]

28 En Onky o-Original DSP Listening Modes Note *1 For the Blu-ray Discs, Dolby Digital is used. *2 A V receiver can input the DSD signal from HDMI IN . Setting the output setting on the player side to PCM might obtain a better sound according to the player . In that case, set the output setting on the player side to PCM. *3 Depending on the input s[...]

29 En Advanced Operations Adv anced Setup Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus a ppear on the connected TV and provide a con venient way to cha nge the A V receiver’ s various settin gs. Se ttings are org a nized into [...]

30 En Explanatory No tes Menu HDMI Inpu t If you connect a video component to an HDMI input, you must assign that input to an i nput selector . For example, if you connect your Blu-ray Disc/D VD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/D VD ” input selector . Here are the defau lt assignments. ■ BD/D VD , VCR/D VR , CBL[...]

31 En Note •W h e n a n HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 30 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., COAX , etc.), you can also select HDMI inputs. • A vailable sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44[...]

32 En ■ Left, Center, Righ t, Surrou nd Right, Su rround Left, Subwoofer ` Specify the dist ance from the each speake r to your lis- tening position. Note • The speaker distance setting cannot be changed while a pair of headphones is connected, or “ Audio TV OUT ” setting is s et to “ On ” ( ➔ 34 ) or Speakers B is on. • Speakers th[...]

33 En DTS Setting Neo:6 Music ■ Center Im age ` 0 to 2 to 5 W ith this setting, you can specify b y how mu ch the front left and right channel output is attenuated in order to create the center c hannel. Setting a v alue “0” in the middle is set to hear a sound. Sound is spread in left and ri ght (the outside) so that the set v a lue is made [...]

34 En Menu HDMI Set up ■ A udio TV OUT ` Off : HDMI audio is not output. ` On : HDMI audio is output. This preference dete rmines whether audio received at the HDMI IN is output by the HDMI OUT . Y ou may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component that’ s connecte[...]

35 En Note •T h e “ Po wer Control ” setting can be set on ly when the above “ HDMI Control ” setting is set to “ On ”. • HDMI power control only works with p -compatible components that support it and may not w ork properly with some components due to thei r settings or compatibility . • When set to “ On ”, power consumption [...]

36 En EX.BASS EX.B ASS is a technology that have dev eloped by experi- ments and listening tests to reproduce a natural deeper bass. When you turn th e mode on, you can get dynamic and deeper presence on your movies and music. ■ EX.B ASS ` Off: EX.B A SS off. ` On : EX.B ASS on. Note • The EX.BASS is disabled when the Dire ct listening mode is [...]

37 En A udio Selector Y ou can set priorities of a udio output when there are both digital and analog inputs. ■ AudioSel ` ARC : The audio signal from your TV tuner can be sent to the HDMI OUT of the A V receiver. *1 W ith this selection the TV’ s audio can be automati- cally selected as a prior ity among other assignments. ` HDMI : This can be[...]

38 En Controlling iPod & Other Components Contr olling iP od Models sold are different depending on the re gion. Connecting an Onky o Dock No. Onkyo Dock Cable Note Pa ge A UP-A1 Dock (Uni versal Port Opt ion Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases. • Y ou can contr[...]

39 En UP-A1 Dock W ith the UP-A1 Dock, you can easily play the music, photo, or mo vie stored on your iPod through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controll er to operate your iPod. ■ Basic Operation Au t o Po w e r O n If you start iPod playback while the A V recei ver is on Standby , the A V re[...]

40 En Note • Enter the appropriate remote c ontrol code before using the A V receiver’ s remote controller for the first time ( ➔ 42 ). • Connect the RI Dock to the A V receiver with an u cable ( ➔ 38 ). • Set the RI Dock’ s RI MODE switch to “HDD” or “HDD/ DOCK”. • Set the A V re ceiv er’ s Input Displa y to “ DOCK ” [...]

41 En ✔ : A vailable b uttons Note • W ith some iPod models and generations, cer tain buttons may not work as expected. • For detailed operation of the iPod, pl ease r efer to the in struction ma nual. *1 This button do es not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off . Y our iPod may not respond the f irst time you press this button, [...]

42 En Contr olling Other Onky o Components Y ou can use the A V receiv er’ s remote controller (RC-762M) to control your other Onkyo A V components. This section explains ho w to enter the remote control code for a component that you want to control: D VD, CD, etc. The following REMO TE MODE are preprogrammed with remote control codes for contr o[...]

43 En If you want to control an Onk yo component by pointing the remote controller dir ectly at it, use the follo wing remote control codes: ` 32900 : Onkyo Blu-ray Disc play er ` 32901 : Onkyo HD-D VD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Do ck Note • If you connect an cassette tape deck to the TV/CD IN j[...]

44 En Note • W ith some components, certai n buttons may not work as expected, and some may not work at all. ✔ : A vailable b uttons *1 The p func tion is not supported. The p sup- ported by the A V rece iv er is the CEC system control function of the HDMI standard. *2 These buttons func tions as col ored buttons or A, B, C, D but- tons. *3 3 ([...]

45 En Others T r oubleshooting If you ha ve any trouble using the A V recei ver, look for a solution in this section. If you can’ t resolve the issue your- self, contact your Onkyo dealer . ■ Can’t turn on the A V receiver ■ The ST ANDBY indicator flashes red ■ There’ s n o sound, or it’ s very quiet If you can’t reso lve the issue [...]

46 En ■ Only the fr ont speakers pr oduce sound ■ Onl y the center spea ker produces so und ■ The surround speakers pr oduce no sound ■ The center speaker produces no sound ■ The subwoof er produces no sound ■ There’ s no soun d with a cer tain signal format ■ Can’t get 5.1 playbac k ■ The volume cannot be set to 79 ■ Noise ca[...]

47 En ■ There’ s no picture from a source connected to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy , FM stereo reception is noisy , or the FM STEREO indicator doesn’t light ■ The remote contr oller doesn’t w ork ■ Can’t control other components ■ Can’t record ■ Stand-b y power consumption ■ The sou[...]

48 En ■ The foll owing settings can be made f o r the composite video inputs Y ou must use the buttons on th e unit to make these set- tings. 1. While holding do wn the input selector button for the input source that you want to set, press SETUP . 2. Use e / r to change the setting. 3. Press the input selector button for the input source that you[...]

49 En Specifications Amplifier Section Video Section T uner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specif ications and features are subject to change without notice. A V Receiver Rated Ou tput Po wer All channel s: 110 watts mini mum contin uous power per channel , 6 ohms, at 1 kH[...]

50 En P assive Subwoofer (SK W -38 0) Front Speaker (SKF-38 0) Center Speaker (SKC-380) Surround Spe aker (SKR-380) Specifications and features are subject to change without notic e. 5.1ch Home Theater Spea ker P ackage Ty p e Bass-reflex type Pass iv e subwoofer Impedance 6 Ω Maximum inpu t power 130 W Output so und pre ssure leve l 83 dB/W/m Fr[...]

51 En About HDMI Designed to meet the increased demand s of digital TV , HDMI (High Definition Mult imedia Interface) is a new digital interface standard for connect ing TVs, projectors, Blu-ray Disc/D VD players, set-top boxes, and oth er video compo- nents. Until no w , se veral sepa rate video and audio ca bles have been required to conne ct A V[...]

52 En Using an RIHD-compatible TV , Pla yer , or Recor der p , which stands for Remote Interacti ve ov er HDMI, is the name of the system control function found on Onkyo components. The A V receiver can be us ed with CEC (Consumer Electronics Cont rol), which allo ws system control over HDMI and is part of the HDMI standard. CEC provides inte roper[...]

53 En ■ How to connect and setup 1 Confirm the connecting and setting . 1. Connect the HDMI OUT jack to the HDMI input jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V receiv er using an optical digital cable. Note • When you use the audio return channel (ARC) function with TV an HDMI (Audio Re turn C[...]

54 En Memo[...]

55 En Memo[...]

SN 29400475 Y1005-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 4 7 5 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yagawa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .S.A. CORPORA TION 18 P ar k Wa y , Upper Saddle River , N.J. 07458, U.S .A. T el: 800-229-1687, 201-[...]