Onkyo HT-R558 инструкция обслуживания

E n AV RECEIVER HT-R558 Instruction Manual Contents Safety Information and Introduction ............ 2 Table of Contents ............. .............. ........... ..... 5 Connections ....... ........... .............. .............. ... 11 Turning On & Basic Operati ons .................. 19 Advanced Operations .............. .............. ....[...]

En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instruct ions. 2. Keep these instructi ons. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this a pparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilat ion openings. Install in accordance with the manuf acturer’s instruc[...]

Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted ma terial is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot tu rn on the unit, contact your Onkyo dealer. 3. Care —Occa[...]

Safety Information and Introduction En-4 Supplied Accessories Make sure you have the following accessories: * In catalogs and on p ackaging, the letter at the end of the product name indicates the color. Specifi cations and opera tions are the same regardless of color. ■ Installing the batteries Note • If the remote controller doesn’t work re[...]

Safety Information and Introduction En-5 Table of Contents Safety Information and Intro duction Important Safety Instructions ......................................2 Precautions ................................................................... 3 Supplied Accessories......................... .......................... 4 Table of Contents .........[...]

Safety Information and Introduction En-6 Features Amplifier • 100 Watts/Channel @ 6 ohms (IEC) • 120 Watts/Channel @ 6 ohms (JEITA) • Optimum Gain Volume Circuitry • H.C.P.S. (High Current Po wer Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color, Lip Sync, DTS- HD Master Audio, DTS-HD[...]

Safety Information and Introduction En-7 Front & Rear Panels For detailed informat ion, se e the pages in parentheses. a 8 ON/STANDBY button ( 19 ) b HDMI T HRU ind icator ( 48 ) c SPEAKERS A and B buttons ( 35 ) d Remote control sensor ( 4 ) e LISTENING MODE butt ons ( 30 ) f Display ( 8 ) g RT/PTY /TP button ( 25 ) h MEMORY but ton ( 25 ) i T[...]

Safety Information and Introduction En-8 For detailed informat ion, se e the pages in parentheses. a A and B spe aker indica tors ( 35 ) b M.Opt indi cator ( 37 , 51 ) c Listening mode and format indicators ( 30 , 47 ) d Audyssey indicator ( 27 , 45 ) Dynamic EQ indic ator ( 45 ) Dynamic Vol indica tor ( 46 ) e T uning indicators RDS indi cator ( 2[...]

Safety Information and Introduction En-9 a DIGITAL IN COAX IAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c HDMI I N and OUT jacks d FM ANTENNA jack and AM ANTENNA terminal e SUBWOOFER PRE OUT jack f SPEAKERS termina ls ( FRONT A , CENTER , SURROUND , FRONT B ) g Power cord h u REMOTE CONTROL jack i Composite video and analog audio jacks [...]

Safety Information and Introduction En-10 Remote Controller For detailed informat ion, se e the pages in parentheses. a 8 button ( 19 ) b REMOTE MODE/INPUT SELECTOR but tons ( 20 ) c TONE and Tone Level buttons ( 49 ) d SP A/B butto n ( 35 ) e q / w / e / r and ENTE R buttons f SETUP butto n ( 39 ) g Listening Mo de buttons ( 30 ) h DIMMER butto n [...]

En-11 Connections Connecting the AV Receiver Connecting the Speaker Ca bles The following illustration sh ows how to connect the speakers to each pair of terminals. ■ Pus h-type speaker terminals Strip 10 to 12 mm of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown (Supplied speaker cables are already str[...]

Connections En-12 Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really p owerful and solid bass. To get the best from your surround sound system, you need to set the speaker se ttings aut[...]

Connections En-13 Speaker Connecti on Precautions Read the following before connecting your speakers: • You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lowe r impedance, and use the amplif ier at high volume levels for a long period of time, the built-in am p protection circuit may be activated. •[...]

Connections En-14 Connecting AV components a • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. • Push plugs in all the way to make good connections (l oose connections can cause noise or malfunctions). • To p[...]

Connections En-15 * If your TV doesn’t suppo rt Audi o Return Channe l (ARC), you need to connect an optical digita l cable toge ther with the HDMI cable to the AV receiver. * When listening to an HDM I component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI[...]

Connections En-16 Connect your components to th e appropriate jacks. The default input assignments are shown below. See “Connection Tips and Video Signal Path” for more information ( ➔ page 63 ). ✔ : Assignment can be changed ( ➔ pages 41 , 42 ). Note *1 When USB input is selected, you can input video signals fro m the AUX INPUT VIDEO jac[...]

Connections En-17 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u while the AV receiver is on standby, the AV receiver will automa tically turn on and select that component as the input source. ■ Direc t Change When playback is started on [...]

Connections En-18 This section explains how to connect the s upplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must c onnect the antenna to use the tuner. Note • Once your AV receiver is ready for use, you’ll need to tune into a radio station an d position the [...]

En-19 Turning On & Basic Operations Turning On/Off the AV Receiver Tip • For details on power management settings, see “Auto Standby” ( ➔ pa ge 48 ). 8 ON/ST ANDBY 8 RECEIVER Turning On 1 Press 8 ON/STANDBY on the front panel. or Press RECEIVER followed by 8 on the remote controller. The AV receiver comes on, and its display lights. Tur[...]

Turning On & Basic Operations En-20 Playback ■ Op erating with the remote controller ■ Op erating on the AV rec eiver The on-screen menus app ear only on a TV that is connected to the HDMI OUT . If your TV is conne cted to other video outputs, us e the AV receiver’s display when changing settings. This section describ es the procedur e fo[...]

Turning On & Basic Operations En-21 Tip • See “Controlling Other Onkyo Co mponents” about the operation of other com ponents ( ➔ page 54 ). Note • The buttons you can use will diff er depending on the devices and media used for playback. Controlling Contents of USB Devices j k l h i o p n e g d b a c m f Press USB first. a TOP MENU Th[...]

Turning On & Basic Operations En-22 This section describes ic ons that appear on the AV receiver’s display during media playback. This section explains how to play music file s on the iPod/iPhone. Compatible iPod/iPhone models Made for: iPod touch (1st, 2nd, 3rd and 4t h generation), iPod classic, iPod nano (2nd, 3rd, 4th, 5th and 6th generat[...]

Turning On & Basic Operations En-23 This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players). See also: • “USB Feat ures” ( ➔ page 67 ). Note • While the message “ Connecting... ” appear s on the AV receiver’s display, do not disconnect the USB cable supplied with you r iPod/iPhone[...]

Turning On & Basic Operations En-24 Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favor ite stations as presets for quick selection. You can also change the frequency steps ( ➔ pa ge 48 ). Tuning into Radio Stations ■ Auto tuning mode ■ Manual tuning mode In manual tuning mode, FM st at[...]

Turning On & Basic Operations En-25 Presetting AM/FM Stati ons You can store a combination of up to 40 of your favorite AM/FM radio stati ons as presets. ■ Selecting Pr esets ■ Deleting Pr esets Using RDS When tuned into an RDS station, the RDS indicator lights. When the station is broadcasting text information, the text can be displayed. ?[...]

Turning On & Basic Operations En-26 Note • In some cases, the text characters displayed on the AV rec eiver may not be identical to those b roadcast by the radio station. Also, unexpected characters may be displaye d when unsupported characters are received. This is not a malfunction. • If the signal from an RDS station is weak, RD S data m[...]

Turning On & Basic Operations En-27 Using Basic Functions With the supplied calibra ted microphone, Audyssey 2EQ ® automatically det ermines the number of speakers connected, their si ze for purposes of bass management, optimum crossover frequencie s to the subwoofer (if present), and distances from the primary listening position. Audyssey 2EQ[...]

Turning On & Basic Operations En-28 Note • You can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedure simply by dis connecting the setup microphone. • Do not connect or disconnect a ny speakers during Audyssey 2EQ Room Correction and Speaker Setu p. • If the AV receiver is muted, it will be unmuted automa[...]

Turning On & Basic Operations En-29 Error Messages While Audyssey 2EQ ® Room Correction and Speaker Setup is in progress, one of the error messages below may appear. The opti ons are: ` Retry : Try again. ` Cancel : Cancel Audyssey 2EQ Room Correction and Speaker Setup. • Ambient noise is too high. The background noise is too loud. Remove th[...]

Turning On & Basic Operations En-30 Selecting Listening Modes See “About Listening Modes” for deta iled information about the li st ening modes ( ➔ page 31 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the liste ning modes intended for use with movies and TV. MUSIC button This button selects the liste ning modes intend[...]

Turning On & Basic Operations En-31 About Listenin g Modes The AV receiver’s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound. ■ Explanatory Notes a Front speakers b Center speaker c Surround speakers d Subwoofer Input Source The following audio formats a[...]

Turning On & Basic Operations En-32 ■ Onky o-Original DSP Listening Modes Listeni ng Mode Description Input Source Speaker Layout Orchestra *1 Suitable for classical or operatic music, this mode emphasizes the sur round channels in order to widen the stereo image, and simulates the natural reverberation of a large hall. A S D F C Unplugged *1[...]

Turning On & Basic Operations En-33 ■ Li stening Modes Listeni ng Mode Description Input Source Speaker Layout Direct In this mode, audio fr om the input source is output without surround-s ound processing. The speaker configuration (presence of speakers) and speaker distance settings are enabled, but much of the proce ssing set via Home menu[...]

Turning On & Basic Operations En-34 Note *1 These listening modes cannot be sele cted dur ing USB or iPod p layback. *2 The AV receiver can input the DSD signal from HD MI I N. Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the player side to PCM.[...]

Turning On & Basic Operations En-35 The Home menu provides quick access to frequently used settings. You can change sett ings and view the current information. Note • The on-screen menus are displayed when: – There is no video input, or – The video input is 480p, 576p, 72 0p, 1080i, or 1080 p. Note *1 Depending on the input source an d li[...]

Turning On & Basic Operations En-36 With the sleep timer, you can set the AV receiver to turn off automatically aft er a specified period. You can adjust the brightness of the AV receiver’s displa y. You can display various in formation about the current input source as follows. The following information ca n typically be displayed. *1 When A[...]

Turning On & Basic Operations En-37 When you connect an u -capable Onkyo component, you must configure the input display so that u can wo rk properly. This setting can be done only from the front panel. The Music Optimizer function enhances the sound quality of compressed music files. You can temporarily mute th e output of the AV receiver. Cha[...]

Turning On & Basic Operations En-38 This section explains how to record the se lected input source to a component wi th recording capability. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e .g., VCR, DVD recorder). Using Headphones 1 Conn[...]

En-39 Advanced Operations On-screen Setup The setup menus provides a con venient way to change the AV receiver’s various settings. Settings are organized into 10 categories. Note • The on-screen menus are displayed when: – There is no video input, or – The video input is 480p, 576p, 72 0p, 1080i, or 1080 p. Note • This procedure can al so[...]

Advanced Operations En-40 Setup menu items Menu item Setting target HDMI Input ( ➔ page 41 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Component ( ➔ page 41 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Digital Audio ( ➔ page 42 ) BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Sp Config ( ➔ page 42 ) Subwoofer Front Center Surround Crossover Double Bass Sp Di[...]

Advanced Operations En-41 Menu HDMI Input If you connect a video compone nt to an HDMI input, you must assign that input to an i nput selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector. Here are the d efault assignments. ■ BD/DVD , VCR/DVR , CBL/SAT [...]

Advanced Operations En-42 Menu Digital Audio If you connect a component to a digital audio input, you must assign that input to an i nput selector. For example, if you connect your CD player to the OPTICAL IN 1 , you must assign “ OPTICAL1 ” to the “ TV/CD ” input selector. Here are the d efault assignments. ■ BD/DVD , VCR/DVR , CBL/SAT ,[...]

Advanced Operations En-43 *2 Choose the setting suitable for the speake r. Note • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set acco rdingly. • Choose a higher crossover frequency if you want more sound from your subwoofer . ■ Double Bass ` On ` Off Turn this setting on to boost[...]

Advanced Operations En-44 Menu Audio Adjust With the Audio Adjust func tions and sett ings, you can adjust the sound and list ening modes as you like. Multiplex/Mono ■ Multiplex Input Ch (Mux) ` Main ` Sub ` Main /Sub This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with mu[...]

Advanced Operations En-45 Items can be set i ndividually for each input selector. Menu Source Setup Audyssey ■ Audys sey ` Off ` Movie : Select this setting for movie ma terial. The Audyssey indicator lights. ` Music : Select this setting for music materi al. The Audyssey indicator lights. Note •W h e n “ Audyssey Quick Start ” has been use[...]

Advanced Operations En-46 ■ Dynamic Volume ` Off ` Light : Activates Light Compression Mode. ` Medium : Activates Medium Compression Mode. ` Heavy : Activates Heavy Compress ion Mode. This setting affects volume the most. It qui ets the loud part s, such as explosions, and boosts th e quiet parts so they can be heard. Note • If you make Dyna mi[...]

Advanced Operations En-47 Audio Selector ■ Au dio Selector ` ARC : The audio signal from your TV tuner can be sent to the HDMI OU T of the AV receiver. *1 With this selection, the TV’s audio can be automatically selected as a priority among other assignments. ` HDMI : This can be selected when HDMI IN has been assigned as an input source. If bo[...]

Advanced Operations En-48 Tuner ■ AM Fre q Step ` 10kHz : ` 9kHz : Select the frequency step according to your area. For AM tuning to work properly, you must specify the AM frequency step used in your area. Note • When this setting is changed, all radio presets will be de leted. Auto Standby ■ Auto Sta ndby ` Off ` On When “ Auto Standby ?[...]

Advanced Operations En-49 ■ Au dio TV Out ` Off ` On This preference determines whether the incoming audio signal is output from the HDMI outpu t. You may want to turn this preference on if your TV is connected to the HDMI output and you want to listen to the audio fro m a connected component through y our TV’s speakers. Normally, this should b[...]

Advanced Operations En-50 Speaker Leve ls ■ Subwoofer Level ` –15 dB to 0d B to +12 dB in 1 dB steps ■ Center Level ` –12 dB to 0d B to +12 dB in 1 dB steps You can adjust the volume of each speaker while listening to an input source. These temporary adjust ments are cancelled when the AV receiver is set to standby. To save the setting you [...]

Advanced Operations En-51 Music Opti mizer ■ Music Optimizer ` Off ` On The Music Optimizer function enhances the sound quality of compressed music files. The M.Opt indicator lights on the AV receiver’s display. Tip • Alter natively, you can use the AV receiver’s MUSIC OPTIMIZER . Note • The Music Optimiz er function only works with PCM d[...]

En-52 Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music stored on your Apple iPod/iPhone through th e AV receiver and enjoy great sound, and watch iPod/iP hone slideshows and videos on your TV. In addition, the on-screen display (OSD) allows you to view , navigate, and sele ct y[...]

Controlling Other Components En-53 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described further in this section. See “Entering Remote Control Codes” for details on entering a remote control code ( ➔ page 54 ). See the Doc[...]

Controlling Other Components En-54 Controlling Other Onkyo Components You can use the AV receiver’s remot e controller to cont rol your other Onkyo AV components. This section explains how to enter the remote contro l code for a component that you want to control: DVD, CD, etc. The following REMOTE MODE butttons are preprogrammed with remote c on[...]

Controlling Other Components En-55 Controlling Onkyo co mponents without u If you want to control an Onkyo component by pointing the remote contro ller directly a t it , or you want to control an Onkyo component that’s not connected via u , us e the following remote control codes: ` 30627 : Onkyo DVD player without u ` 71817 : Onkyo CD player wit[...]

Controlling Other Components En-56 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can cont rol Onkyo component as described below. For details on ente ring a remo te control code for other components, see “Entering Remote Control Codes” ( ➔ page 54 ). Controlling a Blu-ray Disc[...]

Controlling Other Components En-57 ■ CD player / CD recorder / MD recorder operation ■ Cas sette tape deck operation Note • With some compone nts, certain buttons may not work as expected, and some may not work at all. • See “ Controlling Your iPod/iPhone” about the operation of iPod/iPhone ( ➔ page 53 ). *1 The p function is not supp[...]

En-58 Appendix Troubleshooting If you have any trouble using th e AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t tur n on the AV receiver ■ The AV rece iver turns off unexpectedly ■ The AV rec eiver turns o ff and after restoring the power, it turns off again ?[...]

Appendix En-59 ■ Only the front spe akers produce sound ■ Only the ce nter sp eaker produces sound ■ The surround speak ers produce no soun d ■ The ce nter speaker produces no sound ■ Th e subwoofer produc es no sound ■ Th ere’s no sound with a certain signal format ■ Can’t get 5.1 playback ■ The speak er volume canno t be set a[...]

Appendix En-60 ■ There’s no picture ■ There’s no picture from a source connected to an HDMI IN ■ The on-scr een me nus don’t appear ■ Rec eption is noisy, FM st ereo reception is noisy, or the FM STEREO indicator doesn’t light ■ The rem ote controller doesn’t work ■ Can ’t control other c omponents ■ There’s no sound ■[...]

Appendix En-61 ■ The AV rece iver’s remote controller doesn’t control my iPod/iPhone ■ The AV rece iver unexpectedly selects my iPod/iPhone as the input source ■ i Pod/iPhone doesn’ t work properly ■ Can’t re cord ■ Can’t ac cess the music files on a USB device ■ Standby power consumption ■ The sound changes wh en I connect [...]

Appendix En-62 ■ If the picture on your TV/monitor connected to the HDMI OU T is unstable, try switching th e DeepColor function off To turn off the DeepColor function, simu ltaneously press the CBL/SAT and 8 ON/STANDBY butto ns on the AV receiver. While holding down CBL/SAT , press 8 ON/STANDBY until “ Deep Color: Off ” appears on the AV rec[...]

Appendix En-63 Connection Tips and Video Signal Path The AV receiver supports seve ral connection formats for compatibility with a wi de ra nge of AV equipment. The format you choose will depe nd on the formats supported by your components. Use the foll owing sections as a guide. Note • The on-screen setup menus are displayed when: – There is n[...]

Appendix En-64 Using an RIHD- compatible TV, Player, or Recorder p , which stands for Re mote Interactiv e over HDMI, is the name of the system control function found on Onkyo components. The AV rece iver can be used with CEC (Consumer Elec tronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides inter [...]

Appendix En-65 ■ How to connect and setup 1 Confirm the connecting and s etting. 1. Connect the HDMI OUT jack to the HDMI input jack of the T V. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel ( ARC) function is used with an ARC capable TV, [...]

Appendix En-66 About HDMI Designed to meet the increa sed demands of di gital TV, HDMI (High Definition Multimedia Interfac e) is a new digital interface standard fo r co nnecting TVs, projectors, Blu-ray Disc/DVD players, se t-top boxes, and other video components. Until now, severa l separate video and audio cables have been required to connect A[...]

Appendix En-67 USB Features • USB mass storage device class (but not always guaranteed). • FAT16 or FAT32 file system format. • Up to 255 folders can be displayed, and folders may be nested up to 8 levels deep. • USB hubs and USB devices with hub functions ar e not supported. Note • If the media you connect is not supported, the message ?[...]

Appendix En-68 License and Trademark Information “x.v.Color” is a trademark of Sony Corporation. Manufactured under license und er U.S. Patent Nos: 5,956,674; 5,974,380; 6, 226,616; 6,487 ,535; 7,212, 872; 7,333,929 ; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Sym b[...]

Appendix En-69 Specifications Amplifie r Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Aud io Inputs ■ Audio Outputs ■ Oth ers Specifications and featu res are subject to change without notice. Rated Output Power All channels: 5 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC) Maximum Effectiv[...]

Appendix En-70 Memo[...]

Appendix En-71 Memo[...]

2-1, Nisshin-cho , Ney aga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 http://www .onkyo .com/ 18 P ark W ay , Upper Saddle Riv er , N.J . 07458, U.S .A. T el: 800-229-1687, 201-785-2600 F ax: 201-785-2650 http://www .us.onkyo .com/ Liegnitzerstrasse 6, 82194 Groebenz ell, GERMANY T el: +49-8142-4401-0 F ax: +49-8142-4401-[...]

En-1 E n 5.1ch Home Cinema Package Make sure you have the following accessories. Front spea ker (SKF-558) *1 Configuration of the rubber st oppers may be different from the figure, such as being 2 sheets in stead of 1 sheet, but the total number will be same. Center speaker (SKC-391/SKC-39 1C) Surround speaker (SKR-558) Powered subwoofe r (SKW-558)[...]

En-2 Using the Rubber Stoppers for a More Stable Platform We recommend using the s upplied rubber stoppers to achieve the best possible sound from your speakers. The rubber stoppers prevent the speakers from moving, providing a more stable platform. Using the Floor Pads for Subwoofer If the subwoofer is placed on a hard floor (wood, vinyl, tile, et[...]

En-3 The Home Cinema means that you can enjoy surround sound with a real sense of movement in your own home — just like being in a movi e theater or conce rt hall. a Front left and right speakers (SKF-558) They should be positioned fa cing the listener at about ear level, and equally spaced from the TV. Angle them inward slightly so as to create [...]

En-4 ■ Powered Subwoofer (SKW-558) ■ Front Speakers (SKF-558) ■ Center Spe aker ■ Surround Speakers (SKR-558) Specifications and ap pearance are subjec t to change without prior notice. Note For non-magne tic shielded speakers: Try moving the speakers away from your TV or monitor. If discoloration should occur, tu rn off your TV or monitor,[...]

De-1 D e 5.1 Kanal Heimkinopaket Überprüfen Sie, ob Sie folg ende Zubehörteile bekommen haben. Front-Lautsprec her (SKF-558) *1 Es kann sein, dass d ie Konfiguration der Gum mistopper anders ist als die auf der Abbildung. E s können zum Beispiel 2 La gen sein anstatt nur 1, aber die Anzahl wird die gleic he sein. Center-Lautsprec her (SKC-391/S[...]

De-2 Verwendung der Gummisto pper für eine stabilere Plat tform Wir empfehlen Ihnen die mitge lieferten Gummistopper zu verwenden, um den bestmögl ichen Klang mit Ihren Boxen zu erzielen. Di e Gummistoppe r verhindern, dass die Boxen sich bewegen und bieten ei ne stabilere Plattform. Verwendung de r Bodenauflagen für den Subwoof er Wenn der Subw[...]

De-3 Mit dem Heimkino können Sie Surround-Klang mit einer echten Bewegungswahrnehmung bei Ihnen zu Hause genießen – als ob Sie sich in einem Kino oder Konzertsaal befinden. a Linke und rechte Front- Lautsprecher (SKF-558) Sie sollten a uf die Hörer ausgerichtet sein, und zwar auf Ohrhöhe, und im gleich großen Abstand zum Fernseher positio ni[...]

■ Anges chalteter Subwoofer (SKW-558) ■ Front-Lautsprecher (SKF-558) ■ Center-Lautsprecher ■ Surround-Lautsprecher (SKR-558) Technische Daten und Ausseh en können ohne vorherige Ankündigung geändert werden. Anmerkung Falls die Lautspr echer nicht magnetis ch abgeschirmt sind: Versuchen Sie die Lautsprech er weiter entfernt von Ihrem Fern[...]