Onkyo HT-S5300 инструкция обслуживания

7.1ch Home Theater System HT-S5300 A V Receiver (HT -R580) Speaker P ackage (HTP-580) Front Speak ers (SKF-580 L/R) Center Speaker (SKC-580) Surround Speak ers (SKR-580 L/R) Surround Back Speak ers (SKB-580 L/R) Subw oofer (SKW -580) Univ ersal Port Option Dock f o r iPod ® (UP- A1) Instruction Manual Thank you for purchasing an Onkyo 7.1ch Home T[...]

2 En Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near[...]

3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted ma terial is ille gal without the permission of the copyright holder . 2. A C Fuse —The AC fuse inside the unit is no t user-ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler . 3. Care —Occasionally you should dust th [...]

4 En Speaker Precautions Placement • The subwoofer cabinet is ma de out of wood and is there- fore sensiti ve to e xtreme temperatures and humidity , do not put it in locations subjec t to direct sunlight or in humid places, such as near an air con ditioner , humidifier , bathroom, or kitchen. • Do not put water or other liquids close to the sp[...]

5 En Installing the Batte ries Note • If the remote controller doesn’ t work reliably , try replacing the batteries. • Don’t mix new and old batteries or diff erent types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leak- age or corrosion. • Remove e xpired b[...]

6 En Features A V Receiver HT-R580 • 130 W atts/Channel @ 6 ohms • 160 W a tts/Channel @ 6 ohms (JEIT A) • WRA T–W ide Range Am plifier T echnology (5 Hz to 100 kHz bandwidth) • Optimum Gain V olume Circuitry • H.C.P .S. (High Current Po wer Supply) Massi ve High Po wer T ransformer • HDMI (V er .1.4 with Audio Re turn Channel, 3D), D[...]

7 En Fr ont & Rear P anels North American models Asian models The actual front panel has v a ri ous logos printed on it. The y are not sho wn here for clarity . The page numbers in pa rentheses show where you can fi nd th e main explanation for each item. a ON/ST AN DBY button ( ➔ 21 ) b ST ANDBY indicator ( ➔ 21 ) c HDMI THRU indicator ( ?[...]

8 En For detailed information, se e th e pages in parentheses. a A udio input indicators b Listening mode and format indicators ( ➔ 22 , 28 ) c A udyssey in dicators ( ➔ 37 ) d T uning indicators ( ➔ 24 ) e RDS indicator (excluding North Amer ican models) ( ➔ 25 ) f SLEEP indicator ( ➔ 23 ) g MUTING indicator ( ➔ 23 ) h Message area a D[...]

9 En Speaker P ac k age For detailed information, se e the pages in parentheses. ■ Fron t a ST ANDBY/ON indicator W ith the Auto Standby function, the SKW -580 auto- matically turns on when an inp ut signal is detecte d in Standby mode. When there’ s no input signal for a while, the SKW -580 automa tically enters Standb y mode. b OUTPUT LEVEL c[...]

10 En Remote Contr oller For detail ed information, se e the pages in parentheses. a ON/ST ANDBY button ( ➔ 21 ) b REMO TE MODE / INPUT SELECT OR buttons ( ➔ 22 ) c SP LA Y OUT button ( ➔ 23 ) d Arrow q / w / e / r and ENTER buttons e SETUP button ( ➔ 33 ) f LISTENING MODE buttons ( ➔ 28 ) g DIMMER button ( ➔ 22 ) h DISPLA Y button ( ?[...]

11 En About Home Theater Thanks to the A V recei ver’ s superb capabilities, you can enjoy surround sound with a real sense of movement in your ow n home—just like being in a movie thea ter or concert hall. W ith Blu-ray Discs, you can enjo y DTS and Dolb y Digital. W ith analog or digital TV , you can enjoy Dolb y Pro Logic IIx , DTS Neo:6, or[...]

12 En Connecting the A V Receiver Speaker Configurat ion The follo wing table indicate s the channels you should use depending on the number of speakers that you hav e. For 7.1-channel surround-sound playback, you need se ven speakers and a po wered subwoofer . *1 If you’re using only one surr o und back speaker , connect it to the SURR BA CK OR [...]

13 En Connecting the Sp eaker Cables Screw-type speaker termi nals Using Banana Plu gs (Nor th American models) • If you are using banana plugs, tighten the speak er terminal before inserting the banana plug. • Do not insert the speaker code directly in to the center hole of the speaker terminal. Push-type speaker terminals The follow ing illus[...]

14 En The speakers can easily be wa ll mounted b y using the ke y- hole slots. T o preven t the speaker from vibrating against the wall, attach tw o of the supplied thick rubber stoppers to the rear of each speaker . T o mount the front, surround and surround back speak ers vertically , use the keyhole slot sho wn to hang each speaker on a screw th[...]

15 En Connected ima ge with A V components • Before making any A V connections, read th e manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve comp leted and double-check ed all A V connections. • Push plugs in all the way to mak e good connecti ons (loose connecti ons can cause noise or malfunc- tions)[...]

16 En Connect your components to the appropr iate jack s. The default input assi gnments are shown belo w . ✔ : Assignment can be changed ( ➔ 34 ). Refer to “ About HDMI” ( ➔ 60 ) and “Using an RIHD-compatible TV , Player, or Record er” ( ➔ 61 ). Tip T o listen to audio recei ved b y the HDMI IN jacks through your TV’ s speakers: [...]

17 En Connect your components to the appropriate jacks. The default input assignments are sho wn below . ✔ : Assignment can be changed ( ➔ 34 ). *1 Connect a turntable (MM) that has a pho no preamp built- in. If you r turntable (MM) doesn’t ha ve it, you’ll need a commercially av ailable phono preamp. If your turntable has a moving coil (MC[...]

18 En Note • When you connect to both A UX INPUT A UDIO jacks and A UX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be giv en a higher priority . • The A V receiv er can output audio and video signals f rom the AU X I N P U T jacks to the VCR/D VR OUT jacks. W ith u (Remote Interactiv e), you can use the follo wing special f[...]

19 En This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna. The A V receiver won’ t pick up any radi o signals without any antenn a connected, so you must co nnect the antenna to use the tuner . Cautio n • Be careful that you don’t injure yourself when using thumbtacks. Note • Once your A V re ceiv er is [...]

20 En The A V receiver supports se vera l connection formats for compat ibility with a wide range of A V equipment. The format you choose will depend on the formats supported by your co mponents. Use the followi ng sections as a guide. Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 57[...]

21 En T urning On/Off the A V Receiver Tu r n i n g O n Pre ss ON/ST AN DBY on the front panel. or Pre ss RECEIVER f ollowed by ON/ST ANDBY on the remote contr oller . The A V recei ver comes on, the display lights, and the ST ANDBY indi cator goe s off. Tu r n i n g O f f Pre ss ON/ST AN DBY on the front panel or the r emote controller . The A V r[...]

22 En Basic Operations ■ Operating on the A V receiv er ■ Operating with the remote contro ller Note • When the subwoofer volume le vel is set to a positiv e (+) value, the maximum master volume lev el is reduced proportionally . T o set the level of the subwoofer , use the OUTPUT LEVEL control. Because our ears are less se nsitive to v ery l[...]

23 En Y ou can temporarily mute the output of the A V receiver. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute function is cancelled when the A V receiver is set to Standby . W ith the sleep timer, yo u can set the A V receiv er to turn off au tomatically after a specified pe riod. Tip • If you need to cancel the sleep [...]

24 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection. This model changes FM/AM frequenc y in 200/10kHz (or 50/9kHz) steps. In manual tuning mode, FM st ations will be in mono. Listening to the Radio T uning into Radio Stations ■ A uto t[...]

25 En Y ou can store a combination of up to 40 of your fav orite FM/AM radio stations as presets. Selecting Pre sets Tip • Y ou can also use the remote controller’ s number buttons to select a preset directly . Deleting Presets When tuned into an RDS station, the RDS indicator lights. What is RDS? RDS stands for Radio Data System and is a metho[...]

26 En Display ing Radio T ext (RT) Note •T h e m e s s a g e “ Wa i t i n g ” may a ppear while the A V receiver waits for the R T information. • If the message “ No T ext Data ” appears on the display , no R T information is av ailable. Finding Stations by T ype (PTY) Y ou can search for radio stations by type. Listening to T raffic Ne[...]

27 En Recor ding This section explains ho w to record the selected input source to a component with recording capa bility , and ho w to record audio and video from different sources. Connecting a Recor ding Component Note • The A V receiver must be turned on for recording. Recording is not possible while it’ s in Standby mode. • If you want t[...]

28 En Using the Listening Modes See “ About Listening Modes” for detailed information about the listening modes ( ➔ 29 ). Listening Mode Buttons MO VIE/TV button This butto n selects the listening modes intended for use with movies and TV . MUSIC button This butto n selects the listening modes intended for use with music. GAME button This but[...]

29 En The A V receive r’ s listening modes can tr ansform your listening room into a mo vie theater or concert ha ll, with high fidel- ity and stunning surround sound. Explanatory Notes ■ Input Source The follow ing audio formats are supported by the listening mode. ■ Speaker Lay out The illustration sho ws which speakers are acti vat ed in e[...]

30 En Listening Modes Listening Mode Description Input Source Speaker Lay out Direct In this mode, audio from the input source is output withou t surround-sound processing. T he “ Sp Config ” (presence of speakers), “ Sp Distance ” and “ A/V Sync ” settings are enabled, but much of the processing set via A UDIO is disabled. See “ Adva[...]

31 En Dolby Digital In th is mode, audio f rom the input source is output without sur round-sound processing. “ Sp Conf ig ” (presence of speakers), “ Crossover ”, “ Sp Dis- tance ”, “ A/V Sync ” and much of the processing set via AU D I O are enabled. See “ Advanced Setup” for more details ( ➔ 33 ). D XCN Dolby Digital Plus *[...]

32 En Onky o-Original DSP Listening Modes Note *1 When the input source contain s the encoded front hi gh channel, front high speakers outp ut the sound. *2 If there are no surr ound back speakers, or Powered Z one 2 is being used, Dolby Pro Logic I I is used. *3 Surround back speakers are no t supported. *4 Front high speakers are no t supported. [...]

33 En Ad v anced Setup Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 576p, 72 0p, 1080i, or 1080p. The on-screen setup menus a ppear on the connected TV and provide a con venient way to change the A V receiver’ s various settings. Set tings are org anized into ten categories on the[...]

34 En Explanatory No tes Menu HDMI Inpu t If you connect a video component to an HDMI input, you must assign that input to an i nput selector . For e xample, if you connect your Blu-ray Disc/D VD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/D VD ” input selector . Here are the defau lt assignments. ■ BD/D VD , VCR/D VR , CB[...]

35 En Note •W h e n a n HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 34 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., CO AX1 , COAX2 , etc.), you can also select HDMI inputs. • A vailable sampling rate for PCM signals from a digital input (optical and coaxial[...]

36 En Menu Sp Distance Here you can specify the distan ce from each speaker to the listening position so that the sound from each speaker arriv es at the listener’ s ears as the sound designer intended. ■ Unit ` feet : Distances ca n be set in feet. Range: 1ft to 30ft in 1 foot steps. ` meters : Distances can be set in m eters. Range: 0.3m to 9[...]

37 En ■ Dimensi on ` –3 to 0 to +3 W ith this setting, you can move the sound f ield forward or backward when using the Dolb y Pro Logic IIx Music listening mode. Higher sett ings mo ve the sound f ield backward. Lo wer settings move it f orward. If the stereo image feels too wide, or there’ s too much surround sound, mo ve the sound f ield f[...]

38 En ■ Reference Level A udyssey Dy namic EQ™ Reference Lev el Offset ` 0d B : It should be used when listening to movies. ` 5d B : Select this setting for cont ent that has a v ery wide dynamic range, such as classica l music. ` 10 dB : Select this setting for jazz or other music that has a wider dynamic range. This setting should also be sel[...]

39 En Menu Name Edit Y ou can enter a preset name for each indi vidual input selector for easy identification. When entered, the preset name will app ear on the display . ■ Name ` --- , Blu-ray , DV D , HD D VD , VCR , DV R , Tivo , CableSTB , SA T STB , PS3 , Wii , Xbox , PC , TV , CD , TA P E , iPod : T o reset to the default, select “ --- ?[...]

40 En Menu HDMI Set up ■ A udio TV OUT ` Off : HDMI audio is not output. ` On : HDMI audio is output. This preference dete rmines whether audio received at the HDMI IN is output by the HDMI OUT . Y ou may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component that’ s connecte[...]

41 En Note •T h e “ Po wer Control ” setting can be set on ly when the above “ HDMI Control ” setting is set to “ On ”. • HDMI power control only works with p -compatible components that support it and may not w ork properly with some components due to thei r settings or compatibility . • When set to “ On ”, power consumption [...]

42 En A udyss ey Settings ■ Dynamic EQ ■ Dyn V ol (Dynamic V olume) See “Dynamic EQ” and “Dynamic V olume” of “ Audio Adjust” ( ➔ 37 ). Late Night Funct ion W ith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts e ven when listening at lo w volume lev els—[...]

43 En A/V Sync When using progressi ve scanning on your Blu-ray Disc/ D VD player , you may find that the picture and sound are out of sync. W ith this setting, you can correct this b y delaying the audio signals. ■ A/V Sync ` 0m s to 100 ms in 10 ms steps Note • A/V Sync is disabled whe n the Direct listening mode is used with an analog input [...]

44 En Zone 2 In addition to your main listening room, you can also enjoy pla yback in the other room, or as we call Zone 2. And, you can select a different source for each room. There are two w ays you can connect Zone 2 speakers: 1. Connect them directly to the A V receiv er. 2. Connect them to an amp in Zone 2. Connecting Y our Zone 2 Speaker s D[...]

45 En If you’ ve connected your Zone 2 speakers to the A V receiv er, as explained in “C onnecting Y our Zone 2 Speak- ers Directly to the A V rece iv er” ( ➔ 44 ), you must set the “ Front Hi gh/Zone2 ” setting to “ Zone2 ”. Menu Hard ware Note •W h e n “ Zone2 ” is selecte d and Zone 2 turned on, the Zone 2 speakers connecte[...]

46 En Contro lling Zone 2 with the Remote Contro ller Note • T o control Zone 2, you must press the remo te controller’ s ZONE2 firs t. Adjusting the V olume for Zone 2 ■ Operating with the remote controller ■ Operating on the A V receiver If your Zone 2 speakers are connected to a recei ver or inte- grated amp in Zone 2, use its v olume co[...]

47 En Contr olling iP od Models sold are dif ferent depending on the re gion. Connecting an Onky o Dock A *1 B No. Onkyo Dock Cable Note Pa ge A UP-A1 Dock (Included) (Universal Port Option Dock) — • When UP-A1 Dock th at seated iPod is connected, the powe r consumption on standby mode slightly increases. • Y ou can control your iPod when “[...]

48 En UP-A1 Dock W ith the supplied UP-A1 Dock, you can easily play the music, photo, or movie stored on y our Apple iPod through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controller t o operate your iPod. ■ Compatible iP od models Made for: • All iPhone models • iPod touch (2nd generation) • iPod t[...]

49 En ■ Charging Y our iP od models Battery The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jack on the A V receiv er. While your iPod is seated in the UP-A1 Dock, its battery will be charge d when the A V receiv er is set to “On” or “Standb y”. Note • When UP-A1 D[...]

50 En ✔ : A vailable b uttons Note • W ith some iPod models, generatio ns and RI Docks, certain butto ns may not work as e xpected. • For detailed operation of the iPod, please re fer to the instr uction manual of RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Y our iPod may not respond the firs t time you [...]

51 En Contr olling Other Components Y ou can use the A V recei ver’ s remote controller (RC-764M) to control your ot her A V components. This section explains ho w to ente r the remote control code (with the default underlined ) for a component that you want to control: D VD, TV , CD, etc. The follo wing REMOTE MODE are preprogrammed with remote [...]

52 En If you want to control an Onkyo component b y pointing the remote controller direct ly at it, use the follo wing remote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-D VD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Dock Note • If you connect an cassette tape deck to the TV/CD IN jac[...]

53 En Note • W ith some components, certain buttons may not work as expected, and some may not work at all. ✔ : A vailable buttons *1 The p function is not supp orted. The p sup- ported by the A V receiver is the CEC system control function of the HDMI standard. *2 These buttons functions as colored buttons or A, B, C, D but- tons. *3 3 (Pause)[...]

54 En T r oubleshooting If you ha ve an y trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue your- self, contact your Onkyo dealer . ■ Can’t turn on the A V receiver ■ The ST ANDBY indicator flas hes red ■ There’ s no sound, or it’ s ver y quiet ■ Only the fr ont spe akers pr oduce [...]

55 En ■ Only the center speaker produces sound ■ The surround speakers pr oduce no sound ■ The center speaker pr oduces no sound ■ The fro nt high or surr ound bac k speakers prod uce no sound ■ The subwoofer produces no sound ■ There’ s no sound with a cer tain signal format ■ Can’t get 6.1/7.1 pl ay bac k ■ The volume cannot b[...]

56 En ■ There’ s no picture from a so urce connect ed to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy , FM stereo reception is noisy , or the FM ST EREO indicator doesn’ t light ■ The remote controller doesn’t w o rk ■ Can’t control other components ■ There’ s no sound ■ There’ s no video ■ The A [...]

57 En ■ The A V rec eiver unexpectedly selects y our iPod as the input source ■ Can’t record ■ There’ s no sound ■ The sound changes when I conne ct m y headphones ■ How do I change the language of a m ultiplex sour ce ■ The u fun ctions don’t w ork ■ The functions A uto P o wer On/Standb y and Direct Change don’t work for com[...]

58 En Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specifications and features are subject to change without notic e. A V receiver Rated Output Power All channels: (North American) 130 watts mini mum continuo us power per cha[...]

59 En ■ Subwoofer (SKW -580) ■ Front Speaker (SKF-580) ■ Center Speaker (SKC-580) ■ Surround/Surround Back Speaker (SKR-580/SKB-580) Specif ications and features are subject to change without notice. 7.1ch Home T heater Speaker P ac kage Ty p e Bass -reflex Input sens itivity/Imp edance 140 mV/20 k Ω Maximum output power 290 W (Dynami c p[...]

60 En About HDMI Designed to meet the inc reased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc p layers/D VD pl ayers, set-top boxes, and other video components. Until no w , sev era l separate video and audio ca bles hav e been required to conne[...]

61 En Using an RIHD-compatible TV , Pla yer , or Recorder p , which stands for Remote Interacti ve o ver HDMI, is the nam e of the system control function found on Onkyo components. The A V receiver can be used with CEC (Consumer Electroni cs Control), which allo ws system control ov er HDMI and is part of the HDMI standard. CEC provides inter oper[...]

62 En ■ How to co nnect and setup 1 Conf irm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V receiv er using an optical digita l cable. Note • When the audio return channel (ARC) function is used with TV for HDMI 1.4, it shou [...]

63 En Memo[...]

SN 29400216 Y1002-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 2 1 6 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yaga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U.S.A. CORPORA TION 18 P ark Wa y , Upper Saddle River , N.J. 07458, U .S.A. T el: 800-229-1687, 201-7[...]