Optoma DS316L инструкция обслуживания

1 English T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ......................................................................................... 2 Precautions.......[...]

2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq[...]

3 English Usage Notice  When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. T o replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 40-41. Precautions Please follow all warnings, precautions and maintenance as recommended in this use[...]

4 English Usage Notice Do:    Turn of f and unplug the power plug from the AC outlet before cleaning the product.    Use a soft dry cloth with mild detergent to clean the display housing.    Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not:    Block the s[...]

5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, us[...]

6 English Introduction Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center .  Due to different applications in each country , some regions may have different accessories. 2 × AAA Ba[...]

7 English Introduction 1. POWER button and LED indicator 2. V entilation (inlet) 3. Zoom Ring 4. Focus Ring Main Unit Product Overview 5. Zoom Lens 6. IR Receiver 7. V entilation (outlet) 8. Input / Output Connections 9. Power Socket 3 5 1 7 AUDIO-IN AUDIO-OUT 2 7 2 8 9 6 4[...]

8 English Introduction Input / Output Connection VGA1-IN/SCART S-VIDEO RS232 VIDEO AUDIO-IN AUDIO-OUT 4 3 2 1 5 6 1. VGA1-In/SCART Connector (PC Analog Signal/Component Video Input/HDTV/SCAR T/ YPbPr) 2. S-Video Input Connector 3. Composite Video Input Connector 4. RS-232 Connector (3-pin) 5. Power Socket 6. Kensington TM Lock Port 7. Audio Output [...]

9 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. No Function on this model 4. No Function on this model 5. Four Directional Select Keys 6. Re-Sync 7. No Function on this model 8. V olume +/- 9. Zoom 10. A V mute 1 1. Video 12. VGA 13. Freeze 14. S-Video 15. Contrast 16. Brightness 17. Menu 18. Keystone +/- 19. Source 20. En[...]

10 English Introduction Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Conrm your item selection. Source Press “SOURCE” to select an input signal. Re-SYNC Automatically synchronizes the projector to the input source. Four Directional Select Keys Use to select items or make adjustments to [...]

11 English Installation VGA1-IN/SCART S-VIDEO RS232 VIDEO AUDIO-IN AUDIO-OUT E62405SP R Connecting the Projector  Due to the difference in applications for each country , some regions may have different accessories.  (*) Optional accessory Connect to Computer/Notebook 1 3 1................................................................[...]

12 English Installation VGA1-IN/SCART S-VIDEO RS232 VIDEO AUDIO-IN AUDIO-OUT E62405SP R Connect to Video Sources 1....................................................................................................Power Cord 2................................................................................................... *VGA Cable 3............[...]

13 English Installation Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the Power LED will turn Red. 2. T urn on the lamp by pressing “ON/ST AND-BY” button either on the top of the projector or on the remote. The Power LED will now turn Blue.  The startup screen will display in approximately 10 [...]

14 English Installation Powering Off the Projector 1. Press the “ON/ST AND-BY” button to turn off the projec- tor lamp. The following message will be displayed on the screen. Press the “ON/ST AND-BY ” button again to conrm, other - wise the message will disappear after 15 seconds. When you press the “ON/ST AND-BY” button a second tim[...]

15 English Installation Adjusting the Projected Image Adjusting the Projector ’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the three adjustable rings counter clockwise to raise the projector or clockwise to lowe[...]

16 English Installation Adjusting the Projector ’s Zoom / Focus Focus Ring Zoom Ring Y ou may turn the zoom ring to zoom in or out. T o focus the image, rotate the focus ring until the image is clear . The projector will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). Adjusting Projection Image Size 16:9 4:3 C A B 4:3 16:9 A B A C [...]

17 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “MENU” on the Remote Control. 2 When OSD is displayed, use keys to select any item in the ma[...]

18 English User Controls Menu T ree  (QJOLVK ,0$*( 'LVSOD 0RGH %ULJKW QHVV &RQWUD VW 6KDUSQ HVV 6DWXUD WLRQ 7LQW $GYDQF HG ,0$*( _$'9$ 1&(' 'HJDPPD )LOP9L GHR* UDSKLF V3& %ULOOLD QW&ROR Uറ &RORU7 HPS :DUP0H GLXP& ROG &RORU &RORU6 SDFH $ 8725*% <89 ,Q[...]

19 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color .  Blackboard: This mode should be selected to achieve optim[...]

20 English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.  Press the to decrease the contrast.  Press the to increase the contrast. Sharpness Adjust the sharpness of the image.  Pres[...]

21 English User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater .  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a [...]

22 English User Controls Advanced |Color Color Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Y ellow Colors. Reset Choose “Y es” to return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this option to enable / disable input sources. Press to enter t[...]

23 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  N[...]

24 English User Controls 16 : 9-I format or or 16 : 9-II format 4 : 3 format Native format Input Signal Display area Picture area Display on Screen[...]

25 English User Controls Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally . V Image [...]

26 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. SETUP | Language[...]

27 English User Controls SETUP Projection  Front-Desktop This is the default selection. The image is projected straight on the screen.  Rear-Desktop When selected, the image will appear reversed.  Front-Ceiling When selected, the image will turn upside down.  Rear-Ceiling When selected, the image will appear reversed in upside down posi[...]

28 English User Controls SETUP | Signal Automatic Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchroniz[...]

29 English User Controls SETUP | Security Security  On: Choose “On” to use security verication when the turning on the projector .  Off: Choose “Of f” to be able to switch on the projector without password verication. Security T imer Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be[...]

30 English User Controls SETUP | Security Change Password  First time: 1 . Press “ ” to s et the pa sswor d. 2. The p asswo rd has to b e 4 digit s. 3. Use num ber bu tt on on t he rem ote to enter your new passwo rd and t hen p res s “ ” ke y to co nr m your pas swo rd.  Change Password: 1 . Press “ ” to i nput ol d pas sword.[...]

31 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.  Optoma: The default startup screen.  Neutral: No logo is displayed.[...]

32 English User Controls Source Lock  On: The projector will search specied connection port.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster . This feature is useful in high altitude areas where the air is thin. Information Hide  On[...]

33 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without press- ing “POWER” button either on the top of the projector or on the remote. Auto Power Off (min) Sets the countdown timer interval. The countdown timer will st[...]

34 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD: Choose “STD” to dim the projector lamp whi[...]

35 English Appendices Image Problems No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replac[...]

36 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a Notebook: 1. First, follow the steps[...]

37 English Appendices Image is out of focus  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance 3.9 to 39.4 feet (1.2 to 12.0 meters) from the projector . See page 16. The image is stretched when displaying 16:9 DVD title  When you play anamorphic DVD or 16:9 DVD, the projector wi[...]

38 English Appendices Other Problems The projector stops responding to all controls  If possible, turn off the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power . Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If th[...]

39 English Appendices On Screen Messages  T emperature warning:  Fan failed:  Lamp warning:  Out of display range: Remote Control Problems If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .  Make sure t[...]

40 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at leas[...]

41 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “POWER” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover . 1 5. Lift up and remove the cover . 2 6. Unscrew the two screws on the lamp module. 3 7. Li[...]

42 English Appendices Compatibility Modes Mode Resolution V -Sync (Hz) H-Sync (KHz) VGA 640 × 480 60 31.50 VGA 640 × 480 72 37.90 VGA 640 × 480 75 37.50 VGA 640 × 480 85 43.30 VGA 720 × 400 70 31.50 VGA 720 × 400 85 37.90 SVGA 800 × 600 56 35.20 SVGA 800 × 600 60 37.90 SVGA 800 × 600 72 48.10 SVGA 800 × 600 75 46.90 SVGA 800 × 600 85 53.[...]

43 English Appendices  Video Compatibility NTSC NTSC M/J, 3.58MHz, 4.43 MHz P AL B/D/G/H/I/M/N, 4.43 MHz SECAM B/D/G/K/K1/L, 4.25/4.4 MHz SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080p(24/50/60Hz) Mode Resolution V -Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 [...]

44 English Appendices RS232 Commands RS232 Pin Assignments Pin no. Spec. 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 Pin no. Name I/O (From Projector Side) 1 TXD OUT 2 RXD IN 3 GND GND 1 2 3[...]

45 English Appendices RS232 Protocol Function List RS232 Commands Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. Optoma ES526L/ EX536L RS232 Comma nd Table ----------------------------- --------------------------------[...]

46 English Appendices ----------------------------- ------------------------------------ ------------------------------------ --------------------------------------------- ------------------------------------ ------------------------------------ - SEND t o proje ctor ----------------------------- ------------------------------------ ---------------[...]

47 English Appendices ----------------------------- ------------------------------------ ------------------------------------ --------------------------------------------- ------------------------------------ ------------------------------------ - ~XX112 1 7E 30 30 31 31 32 20 31 0D Reset Yes ----------------------------- --------------------------[...]

48 English Appendices  Please note that damage resulting from incorrect installation will invalidate the warranty . Ceiling Mount Installation 1. T o prevent damage to you r projector , please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector m[...]

49 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 715 Sycamore Drive T el : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www .optomausa.com Service : services@optoma.com Canada 5630 Kennedy Road, Mississauga, T el : 905-361-2582 ON, L4Z 2A9, Canada Fax: 905-361-2581 www .optoma.ca S[...]

50 English Appendices Latin America 715 Sycamore Drive T el : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www .optoma.com.br www .optoma.com.mx Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, T el : +82+2+34430004 seoul,135-815, KOREA Fax: +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム E-[...]

51 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r[...]

52 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class [...]